Modification of Space Debris Trajectories through Lasers: Dependence of Thermal and Impulse Coupling on Material and Surface Properties
Authors:
- Denise KeilDKDenise Keil
- Stefan ScharringSSStefan Scharring
- Erik KleinEKErik Klein
- Raoul-Amadeus LorbeerRLRaoul-Amadeus Lorbeer
- Dennis SchumacherDSDennis Schumacher
- Frederic SeizFSFrederic Seiz
- Kush Kumar SharmaKSKush Kumar Sharma
- Michael ZwilichMZMichael Zwilich
- Lukas SchnörerLSLukas Schnörer
- Markus RothMRMarkus Roth
- Mohamed Khalil Ben-LarbiMBMohamed Khalil Ben-Larbi
- Carsten WiedemannCWCarsten Wiedemann
Open Access
Abstract
Environmental pollution exists not only within our atmosphere but also in space. Space debris is a critical problem of modern and future space infrastructure. Congested orbits raise the question of spacecraft disposal. Therefore, state-of-the-art satellites come with a deorbit system in cases of low Earth orbit (LEO) and with thrusters for transferring into the graveyard orbit for geostationary and geosynchronous orbits. No practical solution is available for debris objects that stem from fragmentation events. The present study focuses on objects in LEO orbits with dimensions in the dangerous class of 1 to 10 cm. Our assumed method for the change of trajectories of space debris is laser ablation for collision avoidance or complete removal by ground-based laser systems. Thus, we executed an experimental feasibility study with focus on thermal and impulse coupling between laser and sample. Free-fall experiments with a 10 ns laser pulse at nominally 60 J and 1064 nm were conducted with GSI Darmstadt’s nhelix laser on various sample materials with different surfaces. Ablated mass, heating, and trajectory were recorded. Furthermore, we investigated the influence of the sample surface roughness on the laser-object interaction. We measured impulse coupling coefficients between 7 and 40 µNs/J and thermal coupling coefficients between 2% and 12.5% both depending on target fluence, surface roughness, and material. Ablated mass and changes in surface roughness were considered via simulation to discriminate their relevance for a multiple shot concept.Keywords
Funding Information
- Institutional Funding
This publication has 45 references indexed in Scilit:
- A flexible new technique for camera calibrationIEEE Transactions on Pattern Analysis and Machine Intelligence, 2000
- ORION: Clearing near-Earth space debris using a 20-kW, 530-nm, Earth-based, repetitively pulsed laserLaser and Particle Beams, 1996
- The computation of optical flowACM Computing Surveys, 1995
- Expansion of laser-generated plumes near the plasma ignition thresholdAnalytical Chemistry, 1991
- Optical constants of transition metals: Ti, V, Cr, Mn, Fe, Co, Ni, and PdPhysical Review B, 1974
- Optical Constants of the Noble MetalsPhysical Review B, 1972
- Absolute Values of the Optical Constants of Some Pure MetalsPhysica Scripta, 1971
- Thermal Expansion of Some Crystals with the Diamond StructurePhysical Review B, 1958
- Use of Thermal Expansion Measurements to Detect Lattice Vacancies near the Melting Point of Pure Lead and AluminumPhysical Review B, 1958
- The Thermal Expansion of Pure Metals: Copper, Gold, Aluminum, Nickel, and IronPhysical Review B, 1941