Yu-Tung Dai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yu-Tung Dai has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Chi-Yu Chuang
Department of Occupational Safety and Health, Chang Jung Christian University, No. 1, Changda Road, Gueiren District, Tainan City 711, Taiwan
1 shared publication - Chiu-Ying Chen
Department of Public Health , China Medical University , Taichung , Taiwan , cmu.edu.cn
1 shared publication - Hsin-Chih Lai
Department of Green Energy and Environmental Resources, Chang Jung Christian University, Tainan 71101, Taiwan
1 shared publication - Li-Wei Lai
Environmental Research and Information Center, Chang Jung Christian University, Tainan 71101, Taiwan
1 shared publication - Min-Chuan Hsiao
Department of Green Energy and Environmental Resources, Chang Jung Christian University, Tainan 71101, Taiwan
1 shared publication - Perng-Jy Tsai
Department of Occupational Safety and Health, College of Public Health, China Medical University, 91 Hsueh-Shih Road, Taichung 40402, Taiwan
1 shared publication
Latest Publications
- Open Access
- 20 February 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (2) , 406
The Impact of Atmospheric Synoptic Weather Condition and Long-Range Transportation of Air Mass on Extreme PM10 Concentration Events
Atmospheric synoptic weather patterns have a significant impact on the concentration, dispersion, and transportation of air pollution in various regions and times around the world. To assess the impact of atmospheric synoptic weather patterns and long-range air mass transportation, we used weather classification techniques from the BP training model and the HYSPLIT model. Our research uncovered four weather conditions linked to PM10 concentration categories ranging from normal to extreme. Weather conditions 3 and 4 are the most significant conditions supporting the occurrence of extreme concentration events that are heavily influenced by anti-cyclones. Despite weather conditions influencing high concentrations, 60% of long-distance air mass transport to Secunda from Mpumalanga province increased to extreme PM10 concentrations. Furthermore, long-term weather shifts have been observed to positively impact reducing the concentration of PM10 extreme events.
- 20 February 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (2) , 406
Open AccessThe Impact of Atmospheric Synoptic Weather Condition and Long-Range Transportation of Air Mass on Extreme PM10 Concentration Events
Atmospheric synoptic weather patterns have a significant impact on the concentration, dispersion, and transportation of air pollution in various regions and times around the world. To assess the impact of atmospheric synoptic weather patterns and long-range air mass transportation, we used weather classification techniques from the BP training model and the HYSPLIT model. Our research uncovered four weather conditions linked to PM10 concentration categories ranging from normal to extreme. Weather conditions 3 and 4 are the most significant conditions supporting the occurrence of extreme concentration events that are heavily influenced by anti-cyclones. Despite weather conditions influencing high concentrations, 60% of long-distance air mass transport to Secunda from Mpumalanga province increased to extreme PM10 concentrations. Furthermore, long-term weather shifts have been observed to positively impact reducing the concentration of PM10 extreme events.
- Open Access
Evaluation of the Inactivating Ability of Carbon-Nanotube Coated Plasma Treatment on Bioaerosols for Indoor Air Cleaning
This work considers the ability of carbon-nanotube (CNT)-coated plasma to inactivate bioaerosols. Escherichia coli (E. coli) and λ virus phage were chosen as the challenge bioaerosols. A test chamber was used to simulate an indoor environment and to control the air exchange rate (ACH). The results demonstrated that CNT-coated plasma had a significant antimicrobial effect on both bacterial and viral bioaerosols. The experimental results revealed that CNT-coated plasma under an operating voltage of 6.0 kV and an ACH of 0.5 h−1 had significantly higher bioaerosol inactivating ability (kCNT, 0.24 and 0.23 min−1 for E. coli and λ virus phage, respectively) compared to the results without using CNT-coated plasma (kn, 0.09 and 0.08 min−1 for E. coli and λ virus phage, respectively). Under the higher ACH condition, the system demonstrated higher bioaerosol removal efficiency due to the mechanical effect of clean air exchange. Increasing flow rate and operating voltage could raise the inactivating ability of the CNT-coated plasma system. A CNT-coated plasma air-cleaning device was tested in a real indoor medical environment and yielded bacterial bioaerosol removal efficiency in the range from 70% to 80% within 6 h of operation (7.5 Lpm and 6.0 kV), which suggests that CNT-coated plasma treatment has the potential for further application in improving indoor air quality.
Open AccessEvaluation of the Inactivating Ability of Carbon-Nanotube Coated Plasma Treatment on Bioaerosols for Indoor Air Cleaning
This work considers the ability of carbon-nanotube (CNT)-coated plasma to inactivate bioaerosols. Escherichia coli (E. coli) and λ virus phage were chosen as the challenge bioaerosols. A test chamber was used to simulate an indoor environment and to control the air exchange rate (ACH). The results demonstrated that CNT-coated plasma had a significant antimicrobial effect on both bacterial and viral bioaerosols. The experimental results revealed that CNT-coated plasma under an operating voltage of 6.0 kV and an ACH of 0.5 h−1 had significantly higher bioaerosol inactivating ability (kCNT, 0.24 and 0.23 min−1 for E. coli and λ virus phage, respectively) compared to the results without using CNT-coated plasma (kn, 0.09 and 0.08 min−1 for E. coli and λ virus phage, respectively). Under the higher ACH condition, the system demonstrated higher bioaerosol removal efficiency due to the mechanical effect of clean air exchange. Increasing flow rate and operating voltage could raise the inactivating ability of the CNT-coated plasma system. A CNT-coated plasma air-cleaning device was tested in a real indoor medical environment and yielded bacterial bioaerosol removal efficiency in the range from 70% to 80% within 6 h of operation (7.5 Lpm and 6.0 kV), which suggests that CNT-coated plasma treatment has the potential for further application in improving indoor air quality.
- Open Access
- 25 July 2013
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 10 (8) , 3157-3171
Developing a Semi-Quantitative Occupational Risk Prediction Model for Chemical Exposures and Its Application to a National Chemical Exposure Databank
In this study, a semi-quantitative occupational chemical exposure risk prediction model, based on the calculation of exposure hazard indexes, was proposed, corrected, and applied to a national chemical exposure databank. The model comprises one factor used to describe toxicity (i.e., the toxicity index), and two factors used to reflect the exposure potential (i.e., the exposure index and protection deficiency index) of workers exposed to chemicals. An expert system was used to correct the above proposed model. By applying the corrected model to data obtained from a national occupational chemical hazard survey program, chemical exposure risks of various manufacturing industries were determined and a national control strategy for the abatement of occupational chemical exposures was proposed. The results of the present study would provide useful information for governmental agencies to allocate their limited resources effectively for reducing chemical exposures of workers.
- 25 July 2013
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 10 (8) , 3157-3171
Open AccessDeveloping a Semi-Quantitative Occupational Risk Prediction Model for Chemical Exposures and Its Application to a National Chemical Exposure Databank
In this study, a semi-quantitative occupational chemical exposure risk prediction model, based on the calculation of exposure hazard indexes, was proposed, corrected, and applied to a national chemical exposure databank. The model comprises one factor used to describe toxicity (i.e., the toxicity index), and two factors used to reflect the exposure potential (i.e., the exposure index and protection deficiency index) of workers exposed to chemicals. An expert system was used to correct the above proposed model. By applying the corrected model to data obtained from a national occupational chemical hazard survey program, chemical exposure risks of various manufacturing industries were determined and a national control strategy for the abatement of occupational chemical exposures was proposed. The results of the present study would provide useful information for governmental agencies to allocate their limited resources effectively for reducing chemical exposures of workers.