Xiaosong Huang
Research Subjects
Xiaosong Huang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Bhaskar Patham
India Science Lab, GM Global R&D, Bangalore, Karnataka, India
1 shared publication- Chi Zhang
Center for Marine Materials Corrosion and Protection, College of Materials, Xiamen University, 422th. Siming Rd, Xiamen 361005, China
1 shared publication - Dajiang Zheng
College of Materials, Xiamen University, Xiamen 361005, China
1 shared publication Devendrasinh Darbar
Battery Materials and Systems Research, General Motors Global Research and Development, Warren, MI 48092, USA
1 shared publicationDonna Bahroloomi
Department of Mechanical Engineering, Michigan State University, East Lansing, USA
1 shared publicationGongshin Qi
Battery Materials and Systems Research, General Motors Global Research and Development, Warren, MI 48092, USA
1 shared publication
Latest Publications
- Open Access
- 15 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (19) , 11656-11668
Development of diverse aluminium concentration gradient profiles in Ni-rich layered cathodes for enhanced electrochemical and thermal performances
Nickel (Ni)-rich cathodes with elemental concentration gradients within particles have attracted great interest due to their considerably enhanced interfacial stability and electrochemical performance for advanced Li-ion batteries. In this study, we shift our focus from traditional research centered on the optimal chemical compositions in Ni-rich cathode powders with concentration gradients; instead, we decipher the interrelated effects of aluminium (Al) concentration gradient profiles on electrochemical performance and thermal stability. We successfully obtained LiNi0.95Al0.05O2 powders with different Al-gradient profiles by controlling the synthesis parameters, including the co-precipitation schedules of Al/Ni sources and sintering time. Using a combination of focused ion beam (FIB) and energy dispersive spectroscopy (EDS), we analyzed Al dispersion across the particle cross-sections. Remarkably, a greater Al concentration gradient across particles enhanced cathode–electrolyte interphase (CEI) stability during extended cycles, as evidenced by X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Consequently, the LiNi0.95Al0.05O2 cathode with greater Al concentration gradients exhibited enhanced capacity retention, C-rate performance, and thermal stability compared to LiNi0.95Al0.05O2 with lower Al gradients or Al-free LiNiO2 cathodes. This result underscores the crucial role of the elemental gradient profile, highlighting it as an equally important aspect in the optimization of cathode chemical compositions.
- 15 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (19) , 11656-11668
Open AccessDevelopment of diverse aluminium concentration gradient profiles in Ni-rich layered cathodes for enhanced electrochemical and thermal performances
Nickel (Ni)-rich cathodes with elemental concentration gradients within particles have attracted great interest due to their considerably enhanced interfacial stability and electrochemical performance for advanced Li-ion batteries. In this study, we shift our focus from traditional research centered on the optimal chemical compositions in Ni-rich cathode powders with concentration gradients; instead, we decipher the interrelated effects of aluminium (Al) concentration gradient profiles on electrochemical performance and thermal stability. We successfully obtained LiNi0.95Al0.05O2 powders with different Al-gradient profiles by controlling the synthesis parameters, including the co-precipitation schedules of Al/Ni sources and sintering time. Using a combination of focused ion beam (FIB) and energy dispersive spectroscopy (EDS), we analyzed Al dispersion across the particle cross-sections. Remarkably, a greater Al concentration gradient across particles enhanced cathode–electrolyte interphase (CEI) stability during extended cycles, as evidenced by X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Consequently, the LiNi0.95Al0.05O2 cathode with greater Al concentration gradients exhibited enhanced capacity retention, C-rate performance, and thermal stability compared to LiNi0.95Al0.05O2 with lower Al gradients or Al-free LiNiO2 cathodes. This result underscores the crucial role of the elemental gradient profile, highlighting it as an equally important aspect in the optimization of cathode chemical compositions.
- Open Access
Electrochemical Activity and Damage of Single Carbon Fiber
The electrochemical activity of a carbon fiber was characterized at different potentials in 3.5 wt.% NaCl solution, and the fiber cylindrical surface changed by polarization at different potentials was revealed by SEM, AFM, optical microscopy, FTIR spectroscopy, Raman spectroscopy, and XRD. The results showed that the carbon fiber exhibited different electrochemical activities at some polarization potentials; within a 3V potential range the anodic and cathodic polarization current densities stepped up by more than 5 orders of magnitude, and the carbon fiber (CF) surface dramatically changed with time. Strong anodic polarization appeared to facilitate the breakdown of C-C covalent bonds in the carbon fiber and enhance the amorphization of the fiber surface.
Open AccessElectrochemical Activity and Damage of Single Carbon Fiber
The electrochemical activity of a carbon fiber was characterized at different potentials in 3.5 wt.% NaCl solution, and the fiber cylindrical surface changed by polarization at different potentials was revealed by SEM, AFM, optical microscopy, FTIR spectroscopy, Raman spectroscopy, and XRD. The results showed that the carbon fiber exhibited different electrochemical activities at some polarization potentials; within a 3V potential range the anodic and cathodic polarization current densities stepped up by more than 5 orders of magnitude, and the carbon fiber (CF) surface dramatically changed with time. Strong anodic polarization appeared to facilitate the breakdown of C-C covalent bonds in the carbon fiber and enhance the amorphization of the fiber surface.
- 29 March 2017
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 52 (1) , 37-46
Damage tolerance characterization of carbon fiber composites at a component level: A thermoset carbon fiber composite
This work focuses on the impact damage evaluation of a carbon fiber-reinforced thermoset composite at a component level (beams) as an effort to develop the service strategies for this class of materials. The beams were impact damaged at a variety of energy levels, and the pulse thermography nondestructive evaluation approach was used to characterize the damaged areas. The damaged beams were subjected to compression tests to evaluate their residual properties. As expected, both the beam maximum load and residual stiffness decreased with the increase in damage size. The damage growth rates under different load levels were investigated in fully reversed torsional fatigue tests. The fatigued beams were also characterized for their residual compression properties, which were then compared with those of the unfatigued beams. The results will be used to develop computer-aided engineering models to predict the residual strength and fatigue life of damaged composite components.
- 29 March 2017
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 52 (1) , 37-46
Damage tolerance characterization of carbon fiber composites at a component level: A thermoset carbon fiber composite
This work focuses on the impact damage evaluation of a carbon fiber-reinforced thermoset composite at a component level (beams) as an effort to develop the service strategies for this class of materials. The beams were impact damaged at a variety of energy levels, and the pulse thermography nondestructive evaluation approach was used to characterize the damaged areas. The damaged beams were subjected to compression tests to evaluate their residual properties. As expected, both the beam maximum load and residual stiffness decreased with the increase in damage size. The damage growth rates under different load levels were investigated in fully reversed torsional fatigue tests. The fatigued beams were also characterized for their residual compression properties, which were then compared with those of the unfatigued beams. The results will be used to develop computer-aided engineering models to predict the residual strength and fatigue life of damaged composite components.
- 15 September 2013
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 18 (1) , 133-139
A multilayer composite separator consisting of non-woven mats and ceramic particles for use in lithium ion batteries
- 15 September 2013
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 18 (1) , 133-139
A multilayer composite separator consisting of non-woven mats and ceramic particles for use in lithium ion batteries
- 7 October 2012
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 17 (3) , 591-597
Cellular porous polyvinylidene fluoride composite membranes for lithium-ion batteries
- 7 October 2012
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 17 (3) , 591-597
Cellular porous polyvinylidene fluoride composite membranes for lithium-ion batteries
- 10 May 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 127 (3) , 1959-1966
Experimental characterization of a curing thermoset epoxy‐anhydride system—Isothermal and nonisothermal cure kinetics
This work describes in detail the kinetic model for the cure of an epoxy‐anhydride thermoset matrix resin system. The cure kinetics in both nonisothermal and isothermal modes has been characterized using differential scanning calorimetry. The Sestak–Berggren two‐parameter autocatalytic model was used to describe the nonisothermal cure behavior of the resin satisfactorily. The isothermal cure data was fitted with Kamal's four‐parameter autocatalytic model, coupled with a diffusion factor. These characterization data will form material property inputs for a multiscale modeling framework for the estimation of cure‐induced residual stresses in thick thermoset matrix composites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
- 10 May 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 127 (3) , 1959-1966
Experimental characterization of a curing thermoset epoxy‐anhydride system—Isothermal and nonisothermal cure kinetics
This work describes in detail the kinetic model for the cure of an epoxy‐anhydride thermoset matrix resin system. The cure kinetics in both nonisothermal and isothermal modes has been characterized using differential scanning calorimetry. The Sestak–Berggren two‐parameter autocatalytic model was used to describe the nonisothermal cure behavior of the resin satisfactorily. The isothermal cure data was fitted with Kamal's four‐parameter autocatalytic model, coupled with a diffusion factor. These characterization data will form material property inputs for a multiscale modeling framework for the estimation of cure‐induced residual stresses in thick thermoset matrix composites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
- 30 December 2010
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 15 (4) , 649-662
Separator technologies for lithium-ion batteries
- 30 December 2010
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 15 (4) , 649-662
Separator technologies for lithium-ion batteries
- Top Cited PapersOpen Access
Fabrication and Properties of Carbon Fibers
This paper reviews the research and development activities conducted over the past few decades on carbon fibers. The two most important precursors in the carbon fiber industry are polyacrylonitrile (PAN) and mesophase pitch (MP). The structure and composition of the precursor affect the properties of the resultant carbon fibers significantly. Although the essential processes for carbon fiber production are similar, different precursors require different processing conditions in order to achieve improved performance. The research efforts on process optimization are discussed in this review. The review also attempts to cover the research on other precursor materials developed mainly for the purpose of cost reduction.
Top Cited PapersOpen AccessFabrication and Properties of Carbon Fibers
This paper reviews the research and development activities conducted over the past few decades on carbon fibers. The two most important precursors in the carbon fiber industry are polyacrylonitrile (PAN) and mesophase pitch (MP). The structure and composition of the precursor affect the properties of the resultant carbon fibers significantly. Although the essential processes for carbon fiber production are similar, different precursors require different processing conditions in order to achieve improved performance. The research efforts on process optimization are discussed in this review. The review also attempts to cover the research on other precursor materials developed mainly for the purpose of cost reduction.