RMRichard Metcalfe

Richard Metcalfe

*This is an algorithmically generated author record based on publicly available information.

Richard Metcalfe has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    How wet are shallow granites? An experimental investigation

    by Carlos A. Grattoni, Lorraine P. Field, Bruce W. D. Yardley, Antoni E. Milodowski, Richard Metcalfe, Quentin J. Fisher, Simon Norris

    The water content and porosity of a granite sample have been measured to test the assumption that the porosity in crystalline rocks hosting a waste repository will be water-saturated. Undersaturation would reduce the potential role for rock matrix diffusion and impact on the retention of contaminants. A core was drilled from the Grimsel Test Site, Switzerland, with minimal cooling water, and sealed with a resin coating to preserve its water content. The initial water content, porosity, water saturation and gas permeability were determined by multiple laboratory methods, including measurements under stress to recreate in situ conditions. The initial water content was c. 0.72 vol% while total porosity was distinctly higher ( c. 1.3 vol%). Sub-samples separated from the core by chipping had anomalously high porosity. Gas porosity reduces with stress and was used to determine a loading factor. Correcting for 450 m of overlying granite gives a total in situ porosity of 1.03%, indicating the in situ porosity was in situ conditions, although the saturation level of the cored region might have changed since construction of the test site.


    • 20 November 2024
      • p. 177690

    Radionuclide transport and retardation in uplifting granitic rocks: Part 2 - Modelling coupled processes in uplift scenarios.

    by Richard Metcalfe, Steven J Benbow, Daisuke Kawama, Yukio Tachi

    Uplifting fractured granitic rocks occur in substantial areas of countries such as Japan. Some of these areas might be considered when siting a deep geological repository for radioactive wastes. A repository site would be selected in such an area only if it is possible to make a safety case, accounting for the changing conditions during uplift. The safety case must include robust arguments that chemical processes in the rocks around the repository will contribute sufficiently to minimise radiological doses to biosphere receptors. Numerical modelling is an important aspect of making these arguments. To provide confidence in the safety arguments, numerical models need to be sufficiently realistic, but also parameterised conservatively (pessimistically). However, model development is challenging because uplift involves many complex couplings between groundwater flow, chemical reactions between water and rock, and changing rock properties. The couplings would affect radionuclide mobilisation and retardation, by influencing diffusive radionuclide fluxes between groundwater flowing in fractures and effectively immobile porewater in the rock matrix (rock matrix diffusion, RMD) and radionuclide partitioning between water and solid phases, via: (i) mineral precipitation/dissolution; (ii) mineral alteration; and (iii) sorption/desorption. It is difficult to represent all this complexity in numerical models while showing that they are parameterised conservatively. Here we present a modelling approach, illustrated by simulation cases for some exemplar radioelements, to identify realistically conservative process conceptualisations and model parameterisations.

  • A methodology for deciding on well seal options for abandonment

    by Renato Zagorscak, Richard Metcalfe, Thomas G. Robson, Jennifer A. Wilson

    The energy transition to achieve net zero anthropogenic CO 2 emissions will require permanently sealing and abandoning wells or boreholes drilled for many different purposes, including: underground CO 2 storage; hydrogen storage; geothermal energy extraction; site characterization for radioactive waste repositories; and hydrocarbon extraction. It is necessary to objectively decide what sealing materials, combination of materials and methods of emplacement are optimal for a given well sealing project, taking into account the properties of lithologies penetrated, the physical and geochemical conditions around the well, the geometry of the well, and characteristics of well engineering. A workflow that would allow for a structured approach to designing well seals during well decommissioning and a set of complementary tools that will enable an informed, structured, transparent and traceable process for designing a well decommissioning sealing solution for a particular well in a given geological environment is presented in this paper. The tools include: (1) a database of Features Events and Processes; (2) a decision tree for evaluating different well sealing options and for documenting the rationale for decisions; (3) an approach for comparing options using multiple decision trees; (4) and a suite of simplified numerical models to inform judgements.


  • Open Access

    Post-earthquake rapid resealing of bedrock flow-paths by concretion-forming resin

    by Hidekazu Yoshida, Koshi Yamamoto, Yoshihiro Asahara, Ippei Maruyama, Koichi Karukaya, Akane Saito, Hiroya Matsui, Akihito Mochizuki, Mayumi Jo, Nagayoshi Katsuta, et al.

    Many underground activities may require reducing or preventing fluid flows through bedrock, e.g., sealing of site investigation boreholes, underground tunneling, hydrocarbon field abandonment, and nuclear waste disposal. Cementitious materials such as grout are commonly used for bedrock flow-path sealing, however conventionally used these materials unavoidably undergo physical and chemical degradation, therefore potentially decreasing seal durability. Here, we report a more durable sealing method for concretion-forming resin developed by learning from natural calcite, CaCO3, and spheroidal concretion formation. The method was tested by sealing flow paths next to a tunnel in an underground research laboratory at 350 m depth, in Hokkaido, Japan. The flow paths were initially sealed rapidly, then resealed after disturbance by repeated earthquakes with foci below the underground research laboratory at depths of 2–7 km and maximum magnitude Mw 5.4. The treated rock mass rapidly recovered its very low natural permeability, demonstrating robust self-sealing and healing.


  • Risk assessment methodology for Underground Coal Gasification technology

    by Renato Zagorščak, Richard Metcalfe, Laura Limer, Hywel Thomas, Ni An, Alex Bond, Sarah Watson


  • Open Access

    Natural analogue evidence for controls on radionuclide uptake by fractured crystalline rock

    by Richard Metcalfe, Antoni E. Milodowski, Lorraine P. Field, Roy A. Wogelius, Gráinne Carpenter, Bruce W.D. Yardley, Simon Norris


  • Understanding Radionuclide Migration From the D1225 Shaft, Dounreay, Caithness, UK

    by David Savage, Claire Watson, James Wilson, Alex Bond, Warren Jones, Richard Metcalfe, Tony Milodowski, Colin Munro, James Penfold, Sarah Watson


  • Solubility constraints on uranium concentrations in groundwaters of the Tono uranium deposit, Japan

    by T. Iwatsuki, R. Arthur, K. Ota, R. Metcalfe

    Summary: A key concept underpinning most safety assessments of geological disposal systems for high-level nuclear wastes is that the maximum aqueous concentrations of actinide elements released from the waste will be limited by the solubility of the corresponding tetravalent oxide or hydrous oxide. The validity of this concept for U is evaluated in the present study using hydrochemical and mineralogical data from the Tono uranium (U) deposit in Gifu Prefecture, Japan. In addition, the long-term stability of U mineralization in the Tono deposit is assessed in terms of plausible range of U solubilities in paleogroundwaters migrating through the deposit.A thermodynamic evaluation of the aqueous-speciation and solubility behaviour of U indicates that U concentrations in the coexisting groundwaters greatly exceed the solubility of both uraninite [UO2(c)] and coffinite [USiO4(c)]. The dissolved U concentrations appear instead to be controlled by the solubility of amorphous hydrous U(IV) oxide [UO2(am)], which is metastable with respect to uraninite. Mineralogical and microbiological investigations suggest that pH–Ehconditions similar to those observed presently in groundwaters of the lower Toki Lignite-bearing Formation (pH≈8-10;Eh≈-250--410 mV) have been buffered, possibly since the present geological structure formed about 5-0.7 Ma, by microbial sulphate reduction and precipitation/dissolution of calcite. If so, corresponding U concentrations controlled by UO2(am) solubility are calculated to have been in the range of 10-6.1and 10-8.7mol kg-1depending on the possible environmental conditions,i.e.,Eh, pH and carbonate concentration.