Simon Norris
Research Subjects
Simon Norris has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Antoni E. Milodowski
British Geological Survey
2 shared publications - Richard Metcalfe
Quintessa Ltd, The Hub, 14 Station Road, Henley-on-Thames, Oxfordshire RG9 1AY, UK
2 shared publications Alex Bond
Quintessa Ltd, Henley-on-Thames RG9 1HG, UK
1 shared publication- Andrew W. Woods
University of Cambridge
1 shared publication Andy Woods
University of Cambridge
1 shared publication- Bruce W. D. Yardley
School of Earth and Environment, University of Leeds, Leeds, UK
1 shared publication
Latest Publications
- Open Access
- 19 November 2025
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 561 (1) , 1-7
Implementing geological disposal of radioactive waste – input from research activities
The geological disposal of higher activity radioactive wastes is internationally accepted as a safe, permanent solution. Work to implement this solution is progressing in many countries, involving national and international programmes that bring together technical, social, scientific and engineering considerations to advance subject matter understanding, enhance experience and broaden knowledge bases. This Special Publication collates research outputs from site investigations, advances in technology, experimental studies and modelling activities relevant to radioactive waste disposal. The 16 papers report research undertaken on a variety of topics, including knowledge management, engineered barrier design and geological investigation studies, as well as contributions that consider how disposed waste and multiple barriers of geological disposal facilities evolve on prolonged timescales. The papers reflect the breadth and depth of scientific research activities contributing to radioactive waste disposal.
- 19 November 2025
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 561 (1) , 1-7
Open AccessImplementing geological disposal of radioactive waste – input from research activities
The geological disposal of higher activity radioactive wastes is internationally accepted as a safe, permanent solution. Work to implement this solution is progressing in many countries, involving national and international programmes that bring together technical, social, scientific and engineering considerations to advance subject matter understanding, enhance experience and broaden knowledge bases. This Special Publication collates research outputs from site investigations, advances in technology, experimental studies and modelling activities relevant to radioactive waste disposal. The 16 papers report research undertaken on a variety of topics, including knowledge management, engineered barrier design and geological investigation studies, as well as contributions that consider how disposed waste and multiple barriers of geological disposal facilities evolve on prolonged timescales. The papers reflect the breadth and depth of scientific research activities contributing to radioactive waste disposal.
- Open Access
- 19 November 2025
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 561 (1) , 319-331
How wet are shallow granites? An experimental investigation
The water content and porosity of a granite sample have been measured to test the assumption that the porosity in crystalline rocks hosting a waste repository will be water-saturated. Undersaturation would reduce the potential role for rock matrix diffusion and impact on the retention of contaminants. A core was drilled from the Grimsel Test Site, Switzerland, with minimal cooling water, and sealed with a resin coating to preserve its water content. The initial water content, porosity, water saturation and gas permeability were determined by multiple laboratory methods, including measurements under stress to recreate in situ conditions. The initial water content was c. 0.72 vol% while total porosity was distinctly higher ( c. 1.3 vol%). Sub-samples separated from the core by chipping had anomalously high porosity. Gas porosity reduces with stress and was used to determine a loading factor. Correcting for 450 m of overlying granite gives a total in situ porosity of 1.03%, indicating the in situ porosity was in situ conditions, although the saturation level of the cored region might have changed since construction of the test site.
- 19 November 2025
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 561 (1) , 319-331
Open AccessHow wet are shallow granites? An experimental investigation
The water content and porosity of a granite sample have been measured to test the assumption that the porosity in crystalline rocks hosting a waste repository will be water-saturated. Undersaturation would reduce the potential role for rock matrix diffusion and impact on the retention of contaminants. A core was drilled from the Grimsel Test Site, Switzerland, with minimal cooling water, and sealed with a resin coating to preserve its water content. The initial water content, porosity, water saturation and gas permeability were determined by multiple laboratory methods, including measurements under stress to recreate in situ conditions. The initial water content was c. 0.72 vol% while total porosity was distinctly higher ( c. 1.3 vol%). Sub-samples separated from the core by chipping had anomalously high porosity. Gas porosity reduces with stress and was used to determine a loading factor. Correcting for 450 m of overlying granite gives a total in situ porosity of 1.03%, indicating the in situ porosity was in situ conditions, although the saturation level of the cored region might have changed since construction of the test site.
- Open Access
- 6 February 2025
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 10 (2)
Experiments on buoyancy-driven instability ahead of a dissolution front in a porous rock
Fluid-rock reactions are of great interest in many engineered geological storage and disposal systems where the long term integrity of the system is key, and where fluid seepage through a permeable rock may lead to reaction and convective transport of material through the formation. If an unsaturated fluid displaces formation fluid in equilibrium with a reactive porous medium, a reaction front develops, across which the invading fluid becomes saturated with the soluble matrix material. Depending on the composition of the invading fluid, it may initially be less dense than the formation fluid, but following reaction it may become denser than the formation fluid. If the invading fluid displaces the formation fluid downwards through the porous layer, the reaction front may then be stabilized by buoyancy, but a Rayleigh-Taylor type instability can develop at the interface between the reacted fluid and the original formation fluid ahead of the reaction front. We present a series of new analog experiments of this process by injecting aqueous sugar solutions into a porous layer containing saturated salt solution, salt powder, and glass ballotini. As an analog of a reaction front, a dissolution front develops as the aqueous sugar solution dissolves the salt powder and becomes denser than the saturated salt solution. The buoyancy instability then leads to a growing finger interface. If the buoyancy speed of the fluid, u B , is smaller than u F − u R , where the speed of the advancing fluid-fluid front is u F and the speed of the dissolution front is u R then the instability grows as if the system were unconfined. However, if u B > u F − u R , then the supply of fluid at the dissolution front limits the growth of the instability. We present an idealised model for the speed of the non-linear buoyancy-driven fingers, and we consider the implications of our results for the long term integrity of a number of geological storage systems.
- 6 February 2025
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 10 (2)
Open AccessExperiments on buoyancy-driven instability ahead of a dissolution front in a porous rock
Fluid-rock reactions are of great interest in many engineered geological storage and disposal systems where the long term integrity of the system is key, and where fluid seepage through a permeable rock may lead to reaction and convective transport of material through the formation. If an unsaturated fluid displaces formation fluid in equilibrium with a reactive porous medium, a reaction front develops, across which the invading fluid becomes saturated with the soluble matrix material. Depending on the composition of the invading fluid, it may initially be less dense than the formation fluid, but following reaction it may become denser than the formation fluid. If the invading fluid displaces the formation fluid downwards through the porous layer, the reaction front may then be stabilized by buoyancy, but a Rayleigh-Taylor type instability can develop at the interface between the reacted fluid and the original formation fluid ahead of the reaction front. We present a series of new analog experiments of this process by injecting aqueous sugar solutions into a porous layer containing saturated salt solution, salt powder, and glass ballotini. As an analog of a reaction front, a dissolution front develops as the aqueous sugar solution dissolves the salt powder and becomes denser than the saturated salt solution. The buoyancy instability then leads to a growing finger interface. If the buoyancy speed of the fluid, u B , is smaller than u F − u R , where the speed of the advancing fluid-fluid front is u F and the speed of the dissolution front is u R then the instability grows as if the system were unconfined. However, if u B > u F − u R , then the supply of fluid at the dissolution front limits the growth of the instability. We present an idealised model for the speed of the non-linear buoyancy-driven fingers, and we consider the implications of our results for the long term integrity of a number of geological storage systems.
- 7 August 2024
- Published by Geological Society of London in Energy Geoscience Conference Series
- Vol. 1 (1) , 447-459
Coupled modelling of brine availability in salt-based disposal facilities – learning from DECOVALEX-2023
Salt is a potential host rock or caprock for deep geological disposal facilities for radioactive waste and has several favourable properties compared to other candidate rock types. In particular, intact salt has an extremely small porosity and permeability, which limits water availability and transmissivity. This has tended to lead to disposal concepts in salt being considered as ‘mostly dry’ and hence ideally suited to limiting groundwater interactions which could otherwise lead to corrosion of waste packages and mobilization of radionuclides over isolation timescales (10 5 –10 6 years). However, there is plentiful experimental evidence to suggest that excavations in bedded salt can exhibit non-trivial inflows. These inflows often increase on heating and are thought to arise due to complicated interactions between thermal, hydrogeological and mechanical processes in the salt. Task E in the international collaborative DECOVALEX-2023 programme was established to attempt to better understand how these coupled processes affect brine availability in bedded salt. A summary of the UK team's learning from the task is given in this paper, which may be of relevance when constructing models to inform future safety cases for radioactive waste disposal in salt and in other energy geoscience applications where brine interactions are a potentially complicating factor.
- 7 August 2024
- Published by Geological Society of London in Energy Geoscience Conference Series
- Vol. 1 (1) , 447-459
Coupled modelling of brine availability in salt-based disposal facilities – learning from DECOVALEX-2023
Salt is a potential host rock or caprock for deep geological disposal facilities for radioactive waste and has several favourable properties compared to other candidate rock types. In particular, intact salt has an extremely small porosity and permeability, which limits water availability and transmissivity. This has tended to lead to disposal concepts in salt being considered as ‘mostly dry’ and hence ideally suited to limiting groundwater interactions which could otherwise lead to corrosion of waste packages and mobilization of radionuclides over isolation timescales (10 5 –10 6 years). However, there is plentiful experimental evidence to suggest that excavations in bedded salt can exhibit non-trivial inflows. These inflows often increase on heating and are thought to arise due to complicated interactions between thermal, hydrogeological and mechanical processes in the salt. Task E in the international collaborative DECOVALEX-2023 programme was established to attempt to better understand how these coupled processes affect brine availability in bedded salt. A summary of the UK team's learning from the task is given in this paper, which may be of relevance when constructing models to inform future safety cases for radioactive waste disposal in salt and in other energy geoscience applications where brine interactions are a potentially complicating factor.
- Open Access
- 6 September 2023
- Published by Copernicus GmbH in Safety of Nuclear Waste Disposal
- Vol. 2, 177-178
Features, events and processes (FEP) analysis of the interactions between repository monitoring systems and multi-barrier systems
In line with the European waste directive 2011/70/EURATOM, the European Joint Programme on Radioactive Waste Management (EURAD) was launched in June 2019. EURAD aims to make a step change in European collaboration between advanced and early-stage waste management programmes. Monitoring Equipment and Data Treatment for Safe Repository Operation and Staged Closure (MODATS) is Work Package (WP) 17 of the EURAD programme. This WP aims to address a range of research needs relating to repository monitoring data and technologies. This abstract summarises research relating to the interactions between repository monitoring systems and the multi-barrier systems in which they are emplaced. A detailed features, events and processes (FEP) analysis is being undertaken to identify and describe the manner in which monitoring systems may interact with multi-barrier systems. Monitoring system components are generically considered in this research; they include data acquisition technologies, power technologies, data transmission technologies and data loggers. No specific disposal concepts have been selected; however, a range of commonly engineered barrier system materials and typical host rocks are considered. This FEP analysis research will provide an understanding of the impacts of monitoring systems, which could be used to aid monitoring system design optimisation, for example by supporting the screening of monitoring technologies (White and Scourfield, 2019). It may also provide evidence to demonstrate that monitoring systems do not unacceptably impact the safety functions of the multi-barrier system. Potential interactions may include the creation of gas migration pathways along monitoring power or data transmission cables positioned in the multi-barrier system. This process has been observed in underground research laboratory experiments, such as the Large Scale Gas Injection Test (LASGIT) experiment in the Äspö Hard Rock Laboratory, which involved a series of gas injection tests in a full-scale KBS-3V deposition hole. Other possible interactions could include (non-exhaustive) corrosion of metallic components, degradation of non-metallic components, microbial activity, gas generation, void introduction and formation and volume changes. The final output of this research will be a catalogue of FEPs describing the interactions between generic monitoring systems and multi-barrier systems. Similar to the Nuclear Energy Agency FEP lists, this FEP catalogue is intended to be a starting reference for waste management organisations to use to understand the potential interactions between their specific monitoring systems and multi-barrier systems.
- 6 September 2023
- Published by Copernicus GmbH in Safety of Nuclear Waste Disposal
- Vol. 2, 177-178
Open AccessFeatures, events and processes (FEP) analysis of the interactions between repository monitoring systems and multi-barrier systems
In line with the European waste directive 2011/70/EURATOM, the European Joint Programme on Radioactive Waste Management (EURAD) was launched in June 2019. EURAD aims to make a step change in European collaboration between advanced and early-stage waste management programmes. Monitoring Equipment and Data Treatment for Safe Repository Operation and Staged Closure (MODATS) is Work Package (WP) 17 of the EURAD programme. This WP aims to address a range of research needs relating to repository monitoring data and technologies. This abstract summarises research relating to the interactions between repository monitoring systems and the multi-barrier systems in which they are emplaced. A detailed features, events and processes (FEP) analysis is being undertaken to identify and describe the manner in which monitoring systems may interact with multi-barrier systems. Monitoring system components are generically considered in this research; they include data acquisition technologies, power technologies, data transmission technologies and data loggers. No specific disposal concepts have been selected; however, a range of commonly engineered barrier system materials and typical host rocks are considered. This FEP analysis research will provide an understanding of the impacts of monitoring systems, which could be used to aid monitoring system design optimisation, for example by supporting the screening of monitoring technologies (White and Scourfield, 2019). It may also provide evidence to demonstrate that monitoring systems do not unacceptably impact the safety functions of the multi-barrier system. Potential interactions may include the creation of gas migration pathways along monitoring power or data transmission cables positioned in the multi-barrier system. This process has been observed in underground research laboratory experiments, such as the Large Scale Gas Injection Test (LASGIT) experiment in the Äspö Hard Rock Laboratory, which involved a series of gas injection tests in a full-scale KBS-3V deposition hole. Other possible interactions could include (non-exhaustive) corrosion of metallic components, degradation of non-metallic components, microbial activity, gas generation, void introduction and formation and volume changes. The final output of this research will be a catalogue of FEPs describing the interactions between generic monitoring systems and multi-barrier systems. Similar to the Nuclear Energy Agency FEP lists, this FEP catalogue is intended to be a starting reference for waste management organisations to use to understand the potential interactions between their specific monitoring systems and multi-barrier systems.
- Open Access
- 6 September 2023
- Published by Copernicus GmbH in Safety of Nuclear Waste Disposal
- Vol. 2, 175-176
Hydration and response of an experimental Sandwich shaft-sealing system at the Mont Terri rock laboratory
A necessary and important component for the closure of deep geological repositories (accessed by a shaft) is a shaft-sealing system that limits the fluid inflow from the adjacent rock to the repository in the early post-closure phase and delays the release of possibly contaminated fluids from the repository at a later stage. The Sandwich system developed at Karlsruhe Institute of Technology (Schuhmann et al., 2009) is a multicomponent barrier that can contribute to this sealing function and is considered as part of the German shaft-sealing concept (Kudla and Herold, 2021). Its functionality has been assessed in a large-scale in situ test (the SW-A experiment) carried out at the Mont Terri rock laboratory (MTRL) in cooperation with international partners as part of the Sandwich-HP project since July 2019. The in situ test was planned as part of an international pre-project (Emmerich et al., 2019) and is accompanied by a laboratory- and semi-technical-scale test program as well as by model simulations. The setup of the SW-A experiment comprises two shafts of 1.18 m diameter and 10–12.6 m depth in the Sandy Facies of the Opalinus Clay at MTRL. Each shaft contains a Sandwich seal as well as a hydration system in order to realize fluid inflow from the bottom (Fig. 1a). The implemented Sandwich system is characterized by an alternating arrangement of four low-permeability sealing segments (DS) made of bentonite and five equipotential segments (ES) made of fine-grained quartz sand with higher hydraulic conductivity. Fluid entering an ES is supposed to be evenly distributed over the cross section and, thus, the interface of the adjacent DS, leading to a homogeneous hydration and swelling of the DS. Water bypassing a DS and high hydraulic loads can be absorbed and distributed by the next ES. In the experiment, the sealing systems and the surrounding rock are intensely monitored (e.g., geophysics, water content, relative humidity and temperature, pore pressure, stress, and displacement) in order to investigate the saturation process and assess the interaction of the sealing system and the host rock. Hydration of the system in Shaft 1 started in May 2021, and the monitoring system showed a relatively fast saturation of the lowermost ES and DS and a water bypass in August 2021 (Fig. 1b); this was accompanied by slower saturation of the upper ES and DS, swelling of the DS and a pore pressure increase in the surrounding rock. Hydration of Shaft 2 started in May 2023. Data and experience obtained to date will be presented.
- 6 September 2023
- Published by Copernicus GmbH in Safety of Nuclear Waste Disposal
- Vol. 2, 175-176
Open AccessHydration and response of an experimental Sandwich shaft-sealing system at the Mont Terri rock laboratory
A necessary and important component for the closure of deep geological repositories (accessed by a shaft) is a shaft-sealing system that limits the fluid inflow from the adjacent rock to the repository in the early post-closure phase and delays the release of possibly contaminated fluids from the repository at a later stage. The Sandwich system developed at Karlsruhe Institute of Technology (Schuhmann et al., 2009) is a multicomponent barrier that can contribute to this sealing function and is considered as part of the German shaft-sealing concept (Kudla and Herold, 2021). Its functionality has been assessed in a large-scale in situ test (the SW-A experiment) carried out at the Mont Terri rock laboratory (MTRL) in cooperation with international partners as part of the Sandwich-HP project since July 2019. The in situ test was planned as part of an international pre-project (Emmerich et al., 2019) and is accompanied by a laboratory- and semi-technical-scale test program as well as by model simulations. The setup of the SW-A experiment comprises two shafts of 1.18 m diameter and 10–12.6 m depth in the Sandy Facies of the Opalinus Clay at MTRL. Each shaft contains a Sandwich seal as well as a hydration system in order to realize fluid inflow from the bottom (Fig. 1a). The implemented Sandwich system is characterized by an alternating arrangement of four low-permeability sealing segments (DS) made of bentonite and five equipotential segments (ES) made of fine-grained quartz sand with higher hydraulic conductivity. Fluid entering an ES is supposed to be evenly distributed over the cross section and, thus, the interface of the adjacent DS, leading to a homogeneous hydration and swelling of the DS. Water bypassing a DS and high hydraulic loads can be absorbed and distributed by the next ES. In the experiment, the sealing systems and the surrounding rock are intensely monitored (e.g., geophysics, water content, relative humidity and temperature, pore pressure, stress, and displacement) in order to investigate the saturation process and assess the interaction of the sealing system and the host rock. Hydration of the system in Shaft 1 started in May 2021, and the monitoring system showed a relatively fast saturation of the lowermost ES and DS and a water bypass in August 2021 (Fig. 1b); this was accompanied by slower saturation of the upper ES and DS, swelling of the DS and a pore pressure increase in the surrounding rock. Hydration of Shaft 2 started in May 2023. Data and experience obtained to date will be presented.
- Open Access
- 28 March 2022
- Published by Copernicus GmbH
Natural Analogues – A proposed strategy for implementation within the Nuclear Waste Services (NWS), UK, programme of geological disposal
A proposed strategy for the use of natural analogue (NA) studies in Nuclear Waste Services1 (NWS) UK geological disposal facility programme and safety case has been developed based on an extensive review of past and current international practices. In the review, it was found that information on the strategic implementation of NA information is not readily available. This may be partly due to lack of strategic planning for the utilisation of NAs, or simply because waste management organisations do not generally publish internal strategic discussions. Nevertheless, it is seen of importance that the topic is discussed in public to increase the visibility of NA information and its implementation in geological disposal programmes. Another main conclusion concerns the cultural aspects of treatment of NAs in international fora, which seems to set NA information in the category of complementary/alternative evidence rather than equal part of the knowledge base. Often, the emphasis is set on the uncertainties and qualitative nature of NA. However, this ignores the fact that uncertainties are also present in laboratory, URL (underground rock laboratory) and modelling studies: for example, NA uncertainties are related generally to ill-defined boundary conditions, while short term experiments have uncertainties in both spatial and temporal scales. When NAs are used only as “alternative” lines of evidence, there is a risk that the information is devolved from the other evidence and this creates a risk of over or underestimating processes if extrapolated.The strategy presented highlights the importance of:knowledge management and systematic approaches to the use of data from the broadest range of sources (i.e. laboratory, URL, modelling and NA) possible the continuous review of existing NA information the potential benefits of new NA projects in the future national programme the significance and experience of communication with NA information (at various levels across a broad range of stakeholder groups) The strategic study also includes an update of RWM’s NA catalogue (Milodowski et al. 2015), a starting point of the NWS’s NA knowledge base. Development of a strategic approach to utilise NA information naturally leads to activities to be undertaken in the immediate future and one of the activities emphasised is the potential use of regional (or self) analogues in support of the site characterisation programme. The emphasis and requirements for NA research will evolve and change as the focus of the geological disposal programme develops naturally as the programme matures so, for example, preliminary discussion on the operational phase is also included. ReferencesMilodowski, A.E., Alexander, W.R., West, J.M., Shaw, R.P., McEvoy, F.M., Scheidegger, J.M. & Field, L.P., 2015. A Catalogue of Analogues for Radioactive Waste Management. BRITISH GEOLOGICAL SURVEY COMMISSIONED REPORT CR/15/106. Keyworth, Nottingham British Geological Survey 2015. 1849p.1 Following a merger with Low Level Waste Repository Limited, Radioactive Waste Management (RWM) is now part of Nuclear Waste Services (NWS)
- 28 March 2022
- Published by Copernicus GmbH
Open AccessNatural Analogues – A proposed strategy for implementation within the Nuclear Waste Services (NWS), UK, programme of geological disposal
A proposed strategy for the use of natural analogue (NA) studies in Nuclear Waste Services1 (NWS) UK geological disposal facility programme and safety case has been developed based on an extensive review of past and current international practices. In the review, it was found that information on the strategic implementation of NA information is not readily available. This may be partly due to lack of strategic planning for the utilisation of NAs, or simply because waste management organisations do not generally publish internal strategic discussions. Nevertheless, it is seen of importance that the topic is discussed in public to increase the visibility of NA information and its implementation in geological disposal programmes. Another main conclusion concerns the cultural aspects of treatment of NAs in international fora, which seems to set NA information in the category of complementary/alternative evidence rather than equal part of the knowledge base. Often, the emphasis is set on the uncertainties and qualitative nature of NA. However, this ignores the fact that uncertainties are also present in laboratory, URL (underground rock laboratory) and modelling studies: for example, NA uncertainties are related generally to ill-defined boundary conditions, while short term experiments have uncertainties in both spatial and temporal scales. When NAs are used only as “alternative” lines of evidence, there is a risk that the information is devolved from the other evidence and this creates a risk of over or underestimating processes if extrapolated.The strategy presented highlights the importance of:knowledge management and systematic approaches to the use of data from the broadest range of sources (i.e. laboratory, URL, modelling and NA) possible the continuous review of existing NA information the potential benefits of new NA projects in the future national programme the significance and experience of communication with NA information (at various levels across a broad range of stakeholder groups) The strategic study also includes an update of RWM’s NA catalogue (Milodowski et al. 2015), a starting point of the NWS’s NA knowledge base. Development of a strategic approach to utilise NA information naturally leads to activities to be undertaken in the immediate future and one of the activities emphasised is the potential use of regional (or self) analogues in support of the site characterisation programme. The emphasis and requirements for NA research will evolve and change as the focus of the geological disposal programme develops naturally as the programme matures so, for example, preliminary discussion on the operational phase is also included. ReferencesMilodowski, A.E., Alexander, W.R., West, J.M., Shaw, R.P., McEvoy, F.M., Scheidegger, J.M. & Field, L.P., 2015. A Catalogue of Analogues for Radioactive Waste Management. BRITISH GEOLOGICAL SURVEY COMMISSIONED REPORT CR/15/106. Keyworth, Nottingham British Geological Survey 2015. 1849p.1 Following a merger with Low Level Waste Repository Limited, Radioactive Waste Management (RWM) is now part of Nuclear Waste Services (NWS)
- Open Access
- 1 January 2021
- Published by Elsevier in Applied Geochemistry
- Vol. 124
Natural analogue evidence for controls on radionuclide uptake by fractured crystalline rock
- 1 January 2021
- Published by Elsevier in Applied Geochemistry
- Vol. 124
Open AccessNatural analogue evidence for controls on radionuclide uptake by fractured crystalline rock
- Open Access
- 1 January 2019
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 482 (1) , 1-9
Multiple roles of clays in radioactive waste confinement – introduction
Geological disposal provides the safe long-term management solution for higher-activity radioactive waste. The development of a repository (or geological disposal facility) requires a systematic and integrated approach, taking into account the characteristics of the waste to be emplaced, the enclosing engineered barriers, and the host rock and its geological setting. Clays and clayey material are important in the development of many national geological disposal systems. Clays exhibit many interesting properties, and are proposed both as host rocks and as material for engineered barriers. Whatever their use, clays present various characteristics that make them high-quality barriers to the migration of radionuclides and chemical contaminants. As host rocks, clays are, in addition, hydrogeologically, geochemically and mechanically stable over geological timescales (i.e. millions of years).
- 1 January 2019
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 482 (1) , 1-9
Open AccessMultiple roles of clays in radioactive waste confinement – introduction
Geological disposal provides the safe long-term management solution for higher-activity radioactive waste. The development of a repository (or geological disposal facility) requires a systematic and integrated approach, taking into account the characteristics of the waste to be emplaced, the enclosing engineered barriers, and the host rock and its geological setting. Clays and clayey material are important in the development of many national geological disposal systems. Clays exhibit many interesting properties, and are proposed both as host rocks and as material for engineered barriers. Whatever their use, clays present various characteristics that make them high-quality barriers to the migration of radionuclides and chemical contaminants. As host rocks, clays are, in addition, hydrogeologically, geochemically and mechanically stable over geological timescales (i.e. millions of years).
- Open Access
- 1 December 2018
- Published by Cambridge University Press (CUP) in Radiocarbon
- Vol. 60 (6) , 1649-1656
Overview of CAST project
The European Commission CAST project (CArbon-14 Source Term) aimed to develop understanding of the potential release mechanisms of carbon-14 (radiocarbon, 14C) from radioactive waste materials under conditions relevant to waste packaging and disposal to underground geological disposal facilities. The project focused on the release of carbon-14 as dissolved and gaseous species from irradiated metals (steels, Zircaloys), from spent ion-exchange materials and from irradiated graphites. This paper provides an overview of the CAST project and its output. It also acts as an introduction and scene-setter to the other papers in this special edition of Radiocarbon.
- 1 December 2018
- Published by Cambridge University Press (CUP) in Radiocarbon
- Vol. 60 (6) , 1649-1656
Open AccessOverview of CAST project
The European Commission CAST project (CArbon-14 Source Term) aimed to develop understanding of the potential release mechanisms of carbon-14 (radiocarbon, 14C) from radioactive waste materials under conditions relevant to waste packaging and disposal to underground geological disposal facilities. The project focused on the release of carbon-14 as dissolved and gaseous species from irradiated metals (steels, Zircaloys), from spent ion-exchange materials and from irradiated graphites. This paper provides an overview of the CAST project and its output. It also acts as an introduction and scene-setter to the other papers in this special edition of Radiocarbon.