Antônio Macário Cartaxo de Melo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Antônio Macário Cartaxo de Melo has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Evandro Parente
Universidade Federal do Ceará
7 shared publications - Marcelo Silva Medeiros Júnior
Universidade Federal do Ceará
2 shared publications - Augusto Teixeira de Albuquerque
Universidade Federal do Ceará
1 shared publication Beatriz M. Meneses
1 shared publicationBeatriz Matos Meneses
Univ Fed Ceara, Dept Engn Estrutural & Construcao Civil, Lab Mecan Computac & Visualizacao, Fortaleza, CE, Brazil
1 shared publication- Elias Saraiva Barroso
Computer Graphics, Virtual Reality and Animation Group (CRAb), Universidade Federal do Ceará, Fortaleza, Brazil
1 shared publication
Latest Publications
- 22 May 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (7) , 1-24
Optimization of externally prestressed concrete wind turbine towers
- 22 May 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (7) , 1-24
Optimization of externally prestressed concrete wind turbine towers
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Modified genetic algorithm for efficient optimization: application to prestressed concrete structural elements
Prestressing, whether bonded or non-bonded, has become increasingly attractive as it allows for larger spans, greater architectural flexibility, greater agility in execution and greater durability. All of these advantages are capable of making prestressed concrete structures more economical solutions when associated with an efficient scaffolding system and formwork. The use of prestressed beams combined with ribbed slabs allows the slabs and beams to have the same height, thus favoring the architecture, in addition to facilitating the assembly of formwork and concreting. The designer can appropriately define the dimensions of the beams and slabs, as well as parameters such as the quantity and layout of cables by trial based on experience. However, the use of numerical optimization techniques are tools recognized as appropriate for the search for a structural solution, where design parameters, whether at the level of design (topology), intermediate (shape) or detail (dimension), can be determined such that the solution minimizes a performance measure, for example, cost, which takes into account the cost of materials, the volume of concrete, the weight of passive and active reinforcement, and labor productivity. Given the discrete nature of some variables, genetic algorithms (GA) have been widely used. GAs have control parameters and operators that are, in general, dependent on the problem, requiring calibrations in each case. The objective of this work is to review some optimization models and improve the GA of the BIOS program - developed at the (Computational Mechanics and Visualization Laboratory) LMCV of the Federal University of Ceará (UFC) - investigating new operators, thus aiming at the efficiency of the algorithm for prestressed elements, using a prestressed band beam as a case study. Genetic operators, in particular crossover, will be targets of the study.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessModified genetic algorithm for efficient optimization: application to prestressed concrete structural elements
Prestressing, whether bonded or non-bonded, has become increasingly attractive as it allows for larger spans, greater architectural flexibility, greater agility in execution and greater durability. All of these advantages are capable of making prestressed concrete structures more economical solutions when associated with an efficient scaffolding system and formwork. The use of prestressed beams combined with ribbed slabs allows the slabs and beams to have the same height, thus favoring the architecture, in addition to facilitating the assembly of formwork and concreting. The designer can appropriately define the dimensions of the beams and slabs, as well as parameters such as the quantity and layout of cables by trial based on experience. However, the use of numerical optimization techniques are tools recognized as appropriate for the search for a structural solution, where design parameters, whether at the level of design (topology), intermediate (shape) or detail (dimension), can be determined such that the solution minimizes a performance measure, for example, cost, which takes into account the cost of materials, the volume of concrete, the weight of passive and active reinforcement, and labor productivity. Given the discrete nature of some variables, genetic algorithms (GA) have been widely used. GAs have control parameters and operators that are, in general, dependent on the problem, requiring calibrations in each case. The objective of this work is to review some optimization models and improve the GA of the BIOS program - developed at the (Computational Mechanics and Visualization Laboratory) LMCV of the Federal University of Ceará (UFC) - investigating new operators, thus aiming at the efficiency of the algorithm for prestressed elements, using a prestressed band beam as a case study. Genetic operators, in particular crossover, will be targets of the study.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Numerical analysis of the beam-column connection stiffness in precast concrete with welded steel angle
The use of precast elements in civil construction has the main advantag of expediting the structure’s construction process, as well as increased technological control of the materials used. Despite this, precast structures presente a discontinuity in the connections between the elements, such as between beam and column. This has become an important object of study, where we seek to improve the continuity of these regions, ensuring better distribution of loads and increasing the stiffness of the connection. Therefore, the objective of this study is to analyze, using numerical methods, the stiffness of the beam-column connection in precast concrete using a steel angle welded to the beams and column. To achieve this goal, the structure will be modeled using the Finite Element Method. A structural system composed of two beams and a column with the steel angle welded to the elements in the connection region. The angle is employed to assure a level of continuity in the connections between structural elements and increase its rigidity hence creating a with semi-rigid condition. The result of the numerical model will be verified with a proposed analytical model, considering the existence of a spring in the connection that guarantees the increased stiffness, reducing rotation in the support. From the rotation predicted in the numerical model, we can estimate the rotational stiffness and apply it to the analytical model for comparison and validation. In the numerical model, 4 analyzes will be carried out, the first analysis won’t have the welded angle. The other three analyzes will be carried out with the welded angle, changing the weld area on the column and beams. Finally, the results are expected to demonstrate that the application of the welded angle on the beam and column presents better performance for semi-rigid connection, bringing greater rigidity to the connection, reducing the existing rotation and achieving a better redistribution of loads, thus ensuring a lower maximum positive bending moment for the beam. It is also expected that angles with larger weld areas guarantee greater rigidity for the connection than those with smaller weld areas.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessNumerical analysis of the beam-column connection stiffness in precast concrete with welded steel angle
The use of precast elements in civil construction has the main advantag of expediting the structure’s construction process, as well as increased technological control of the materials used. Despite this, precast structures presente a discontinuity in the connections between the elements, such as between beam and column. This has become an important object of study, where we seek to improve the continuity of these regions, ensuring better distribution of loads and increasing the stiffness of the connection. Therefore, the objective of this study is to analyze, using numerical methods, the stiffness of the beam-column connection in precast concrete using a steel angle welded to the beams and column. To achieve this goal, the structure will be modeled using the Finite Element Method. A structural system composed of two beams and a column with the steel angle welded to the elements in the connection region. The angle is employed to assure a level of continuity in the connections between structural elements and increase its rigidity hence creating a with semi-rigid condition. The result of the numerical model will be verified with a proposed analytical model, considering the existence of a spring in the connection that guarantees the increased stiffness, reducing rotation in the support. From the rotation predicted in the numerical model, we can estimate the rotational stiffness and apply it to the analytical model for comparison and validation. In the numerical model, 4 analyzes will be carried out, the first analysis won’t have the welded angle. The other three analyzes will be carried out with the welded angle, changing the weld area on the column and beams. Finally, the results are expected to demonstrate that the application of the welded angle on the beam and column presents better performance for semi-rigid connection, bringing greater rigidity to the connection, reducing the existing rotation and achieving a better redistribution of loads, thus ensuring a lower maximum positive bending moment for the beam. It is also expected that angles with larger weld areas guarantee greater rigidity for the connection than those with smaller weld areas.
- 29 May 2023
- Published by Elsevier in Ocean Engineering
- Vol. 280
Post-failure behavior of lazy-wave risers
- 29 May 2023
- Published by Elsevier in Ocean Engineering
- Vol. 280
Post-failure behavior of lazy-wave risers
- 1 March 2022
- Published by Elsevier in Marine Structures
- Vol. 82
Methodology for simulation of the post-failure behavior of flexible catenary risers
- 1 March 2022
- Published by Elsevier in Marine Structures
- Vol. 82
Methodology for simulation of the post-failure behavior of flexible catenary risers
- 19 June 2021
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 64 (4) , 1887-1908
Kriging-based optimization of functionally graded structures
- 19 June 2021
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 64 (4) , 1887-1908
Kriging-based optimization of functionally graded structures
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 16 (4)
Influence of the Micromechanics Models and Volume Fraction Distribution on the Overall Behavior of SiC/Al Functionally Graded Pressurized Cylinders
The assessment of the differences in results obtained from various micromechanics homogenization schemes, as well as the implications of assuming different volume fraction profiles was carried out in the present work. The functionally graded composite chosen for the analysis was Al-SiC and comparisons were made in terms of stress and strain distributions along the wall of an internally pressurized hollow cylinder. Different micromechanics homogenization schemes were implemented into Abaqus as user-defined subroutines (UMAT). The numerical simulations were compared to a set of analytical solutions available on the literature. The obtained results varied substantially according to the homogenization scheme employed. It was also found that the type of function chosen to describe the volume fraction distribution plays a major role on the development of the hoop stresses. Additionally, the finite element analysis showed significant stress variation when the actual volume fraction distribution was used. These gradients did not appear when the same profile was approximated by smooth exponential functions. This paper points out some important issues related to common practices associated with the analysis of FGM composites and serves as an overture to a more in-depth discussion of such problems.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 16 (4)
Open AccessInfluence of the Micromechanics Models and Volume Fraction Distribution on the Overall Behavior of SiC/Al Functionally Graded Pressurized Cylinders
The assessment of the differences in results obtained from various micromechanics homogenization schemes, as well as the implications of assuming different volume fraction profiles was carried out in the present work. The functionally graded composite chosen for the analysis was Al-SiC and comparisons were made in terms of stress and strain distributions along the wall of an internally pressurized hollow cylinder. Different micromechanics homogenization schemes were implemented into Abaqus as user-defined subroutines (UMAT). The numerical simulations were compared to a set of analytical solutions available on the literature. The obtained results varied substantially according to the homogenization scheme employed. It was also found that the type of function chosen to describe the volume fraction distribution plays a major role on the development of the hoop stresses. Additionally, the finite element analysis showed significant stress variation when the actual volume fraction distribution was used. These gradients did not appear when the same profile was approximated by smooth exponential functions. This paper points out some important issues related to common practices associated with the analysis of FGM composites and serves as an overture to a more in-depth discussion of such problems.
- 1 January 2017
- Published by SWGE Sistemas Ltda
OTIMIZAÇÃO DE PAVIMENTOS DE CONCRETO PROTENDIDO VIA ALGORITMOS GENÉTICOS
- 1 January 2017
- Published by SWGE Sistemas Ltda
OTIMIZAÇÃO DE PAVIMENTOS DE CONCRETO PROTENDIDO VIA ALGORITMOS GENÉTICOS
- 10 December 2016
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 55 (6) , 2111-2130
A hybrid PSO-GA algorithm for optimization of laminated composites
- 10 December 2016
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 55 (6) , 2111-2130
A hybrid PSO-GA algorithm for optimization of laminated composites
- Open Access
- 1 November 2015
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 12 (11) , 2094-2117
Geometrically nonlinear analysis of thin-walled laminated composite beams
The use of thin-walled composite beams in Engineering has attracted great interest in recent years. Composite beams and other structural elements tend to have thin walls due to the high strength of the material. Other important aspect is that, even without reaching large strains and without overcoming the elastic limit of the material, such as beams present geometric nonlinear behavior due to their high slenderness, leading to large displacements and rotations. In this paper, a three-dimensional frame finite element for geometric nonlinear analysis of thin-walled laminated composite beams is presented. The finite element uses the Total Lagrangian formulation in order to allow the treatment of large displacements, but with moderated rotations. The constitutive matrix of the laminated beams is evaluated through a suitable thin-walled beam theory. In this theory, the effects of the couplings for several layups are considered, but the effects of the warping and transverse shear are neglected. Comparisons with numerical experiments demonstrate the very good accuracy of the proposed finite element.
- 1 November 2015
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 12 (11) , 2094-2117
Open AccessGeometrically nonlinear analysis of thin-walled laminated composite beams
The use of thin-walled composite beams in Engineering has attracted great interest in recent years. Composite beams and other structural elements tend to have thin walls due to the high strength of the material. Other important aspect is that, even without reaching large strains and without overcoming the elastic limit of the material, such as beams present geometric nonlinear behavior due to their high slenderness, leading to large displacements and rotations. In this paper, a three-dimensional frame finite element for geometric nonlinear analysis of thin-walled laminated composite beams is presented. The finite element uses the Total Lagrangian formulation in order to allow the treatment of large displacements, but with moderated rotations. The constitutive matrix of the laminated beams is evaluated through a suitable thin-walled beam theory. In this theory, the effects of the couplings for several layups are considered, but the effects of the warping and transverse shear are neglected. Comparisons with numerical experiments demonstrate the very good accuracy of the proposed finite element.