Evandro Parente
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Evandro Parente has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Antônio Macário Cartaxo de Melo
Laboratório de Mecânica Computacional e Visualização, Departamento de Engenharia Estrutural e Construção Civil, Universidade Federal do Ceará, Fortaleza, Brasil
7 shared publications Antônio Macário Cartaxo de Melo
Laboratório de Mecânica Computacional e Visualização, Departamento de Engenharia Estrutural e Construção Civil, Universidade Federal do Ceará, Campus do Pici, Fortaleza, Brazil
5 shared publications- Joao Batista Marques Sousa
Department of Civil Engineering, Federal University of Ceará, Fortaleza, Brazil
5 shared publications - Aurea Silva de Holanda
Federal University of Ceará
4 shared publications Leonardo Gonçalves Ribeiro
Laboratório de Mecânica Computacional e Visualização, Departamento de Engenharia Estrutural e Construção Civil, Universidade Federal do Ceará, Campus do Pici, Fortaleza, Brazil
4 shared publications- Marcelo Silva Medeiros Júnior
Universidade Federal do Ceará
4 shared publications
Latest Publications
- 17 December 2025
- Published by Elsevier in Composite Structures
- Vol. 379
An isogeometric formulation for material and geometric nonlinear analysis of functionally graded plates using a Quasi-3D theory
- 17 December 2025
- Published by Elsevier in Composite Structures
- Vol. 379
An isogeometric formulation for material and geometric nonlinear analysis of functionally graded plates using a Quasi-3D theory
- 22 May 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (7) , 1-24
Optimization of externally prestressed concrete wind turbine towers
- 22 May 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (7) , 1-24
Optimization of externally prestressed concrete wind turbine towers
- 26 February 2025
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 53 (2) , 398-413
Methodology for Using LWD Data at Different Curing Times to Assess On-Site Properties of Cement-Bitumen Treated Materials
Full-depth reclamation with hydraulic and bituminous binders, also known as cement-bitumen treated materials (CBTMs), is a cost-effective and eco-friendly road rehabilitation method that fully reutilizes preexisting local materials. The mechanical behavior of stabilized materials changes over time due to curing, which is crucial for long-term performance, so adapted on-site quality control (QC) strategies are necessary. This article proposes a methodology for using lightweight deflectometer (LWD) experimental data to assess CBTM properties at different locations and curing times using backcalculation. Multiple data processing techniques and four backcalculation methods for modulus values are introduced: (1) the surface modulus obtained by Love’s solution using only one deflection (ES1Love); (2) the surface modulus obtained by Love’s solution using three deflections (ES3Love); (3) the surface modulus obtained by a finite element–based backcalculation approach using three deflections (ES3FEM), considering the pavement as composed as one single semi-infinite layer; and (4) the elastic modulus of the two distinct materials or layers (CBTM and subgrade), backcalculated with the finite element method and using three deflections (ECBTM3FEM and ESG3FEM). Comparisons between surface modulus (ES) and the moduli set (ECBTM and ESG) demonstrate the fourth method effectively assesses each material’s contribution to pavement stiffness, which is important in evaluating the CBTM layer. The research concludes that LWD is an efficient QC tool for CBTM and that using backcalculated elastic moduli for the separated layers provides better results than the surface modulus for monitoring material evolution over curing time, and this may be important in the case of CBTMs.
- 26 February 2025
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 53 (2) , 398-413
Methodology for Using LWD Data at Different Curing Times to Assess On-Site Properties of Cement-Bitumen Treated Materials
Full-depth reclamation with hydraulic and bituminous binders, also known as cement-bitumen treated materials (CBTMs), is a cost-effective and eco-friendly road rehabilitation method that fully reutilizes preexisting local materials. The mechanical behavior of stabilized materials changes over time due to curing, which is crucial for long-term performance, so adapted on-site quality control (QC) strategies are necessary. This article proposes a methodology for using lightweight deflectometer (LWD) experimental data to assess CBTM properties at different locations and curing times using backcalculation. Multiple data processing techniques and four backcalculation methods for modulus values are introduced: (1) the surface modulus obtained by Love’s solution using only one deflection (ES1Love); (2) the surface modulus obtained by Love’s solution using three deflections (ES3Love); (3) the surface modulus obtained by a finite element–based backcalculation approach using three deflections (ES3FEM), considering the pavement as composed as one single semi-infinite layer; and (4) the elastic modulus of the two distinct materials or layers (CBTM and subgrade), backcalculated with the finite element method and using three deflections (ECBTM3FEM and ESG3FEM). Comparisons between surface modulus (ES) and the moduli set (ECBTM and ESG) demonstrate the fourth method effectively assesses each material’s contribution to pavement stiffness, which is important in evaluating the CBTM layer. The research concludes that LWD is an efficient QC tool for CBTM and that using backcalculated elastic moduli for the separated layers provides better results than the surface modulus for monitoring material evolution over curing time, and this may be important in the case of CBTMs.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
A NURBS-based isogeometric formulation for geometrically nonlinear analysis of shells
Due to their high slenderness, shell structures are vulnerable to collapse caused by loss of stability, hence nonlinear analysis is crucial to ensure a safe design. The advantage of isogeometric analysis (IGA) to exactly describe the geometry of the problem independently of the degree of discretization and allow easy refinements has led to its increasing application in shell analysis. However, IGA does not remove the shear and membrane locking presented by fully integrated shell elements based on Reissner-Mindlin's theory. Thus, several alternatives have been proposed in the literature to solve the locking problem, such as mixed formulation and reduced integration. This work aims to study the effectiveness of different reduced integration schemes to eliminate or alleviate locking in the context of stability and geometrically nonlinear analysis of Reissner-Mindlin shells based on the degenerated solid approach. The proposed formulation is applied to the stability analysis of plates and shells, where critical loads and nonlinear equilibrium paths are evaluated and compared to solutions available in the literature or obtained by the Finite Element Method. Excellent results were obtained, demonstrating that a very accurate and efficient approach for nonlinear analysis of plates and shells can be achieved by using high regularity basis functions obtained by k-refinement and an appropriate reduced integration scheme. This approach not only avoids locking but also reduces the computational cost of nonlinear analysis of shells.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessA NURBS-based isogeometric formulation for geometrically nonlinear analysis of shells
Due to their high slenderness, shell structures are vulnerable to collapse caused by loss of stability, hence nonlinear analysis is crucial to ensure a safe design. The advantage of isogeometric analysis (IGA) to exactly describe the geometry of the problem independently of the degree of discretization and allow easy refinements has led to its increasing application in shell analysis. However, IGA does not remove the shear and membrane locking presented by fully integrated shell elements based on Reissner-Mindlin's theory. Thus, several alternatives have been proposed in the literature to solve the locking problem, such as mixed formulation and reduced integration. This work aims to study the effectiveness of different reduced integration schemes to eliminate or alleviate locking in the context of stability and geometrically nonlinear analysis of Reissner-Mindlin shells based on the degenerated solid approach. The proposed formulation is applied to the stability analysis of plates and shells, where critical loads and nonlinear equilibrium paths are evaluated and compared to solutions available in the literature or obtained by the Finite Element Method. Excellent results were obtained, demonstrating that a very accurate and efficient approach for nonlinear analysis of plates and shells can be achieved by using high regularity basis functions obtained by k-refinement and an appropriate reduced integration scheme. This approach not only avoids locking but also reduces the computational cost of nonlinear analysis of shells.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Surrogate Based Optimization of Functionally Graded Plates
Functionally Graded Materials (FGM) are composites, usually made of ceramic and metal, in which the volume fraction of their constituents varies smoothly along an interest direction. These materials were initially proposed as a solution for the development of thermal barriers, but are currently used in different applications. The variation in composition results in a gradual change in their properties, improving the performance of structures subjected to thermal and mechanical loads, but making structural analysis more complex. Plates, on the other hand, are three-dimensional flat structures in which the thickness is much smaller than their other two dimensions. For projects involving functionally graded plates, both the choice of their constituents and the definition of the distribution of volume fractions are necessary. Computational methods, which simulate the behavior of these structures, and optimization techniques, which explore the design space, are used to obtain a more efficient solution. However, the computational cost of structural analyses can be a limiting factor in the optimization process, since bioinspired algorithms require the analysis of a large number of trial solutions to find the optimal design. Thus, this work addresses the use of surrogate models capable of efficiently approximating the results of numerical simulations. These models are an alternative to reduce the computational cost of the design optimization of complex structures. Surrogates have been incorporated into an optimization methodology known as Sequential Approximate Optimization (SAO), where the approximate response surface is continuously updated and improved by the insertion of new points, enhancing the model approximation. The proposed methodology will be used in the design optimization functionally graded plates considering buckling and free vibration. The results will be evaluated in terms of accuracy and efficiency based on a set of benchmarks.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessSurrogate Based Optimization of Functionally Graded Plates
Functionally Graded Materials (FGM) are composites, usually made of ceramic and metal, in which the volume fraction of their constituents varies smoothly along an interest direction. These materials were initially proposed as a solution for the development of thermal barriers, but are currently used in different applications. The variation in composition results in a gradual change in their properties, improving the performance of structures subjected to thermal and mechanical loads, but making structural analysis more complex. Plates, on the other hand, are three-dimensional flat structures in which the thickness is much smaller than their other two dimensions. For projects involving functionally graded plates, both the choice of their constituents and the definition of the distribution of volume fractions are necessary. Computational methods, which simulate the behavior of these structures, and optimization techniques, which explore the design space, are used to obtain a more efficient solution. However, the computational cost of structural analyses can be a limiting factor in the optimization process, since bioinspired algorithms require the analysis of a large number of trial solutions to find the optimal design. Thus, this work addresses the use of surrogate models capable of efficiently approximating the results of numerical simulations. These models are an alternative to reduce the computational cost of the design optimization of complex structures. Surrogates have been incorporated into an optimization methodology known as Sequential Approximate Optimization (SAO), where the approximate response surface is continuously updated and improved by the insertion of new points, enhancing the model approximation. The proposed methodology will be used in the design optimization functionally graded plates considering buckling and free vibration. The results will be evaluated in terms of accuracy and efficiency based on a set of benchmarks.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Isogeometric Analysis of Functionally Graded Plates using High-Order Theories
Functionally Graded Materials are composites, usually of ceramic and metal, in which the volume fraction of their constituents varies smoothly along an interest direction. These materials were initially proposed as a solution for thermal barriers development, but are currently used in different applications. The composition variation results in a gradual change in their properties, enhancing the performance of structures subjected to thermal and mechanical loads, but making structural analysis more complex. Plates, on the other hand, are three-dimensional flat structures in which the thickness is much smaller than their other two dimensions. Different theories have been proposed for structural analysis of plates. These theories can be grouped based on the considerations adopted for the behavior of transverse shear deformations. In this regard, there are the Kirchoff-Love Theory (also known as the Classical Plate Theory - CPT), which disregards the effect of these deformations, the Reissner-Mindlin Theory (also known as the First-Order Shear Deformation Theory - FSDT), which considers shear deformations constant throughout the plate thickness, and Higher-Order Shear Deformation Theories (HSDT’s), which consider a nonlinear variation of shear deformations through different approaches. Among these theories, the most robust and accurate ones are evidently the HSDT’s. However, it is important to clarify that they require the displacement field to have a C1 continuity, which is complex for isoparametric finite elements. Thus, Isogeometric Analysis emerges as a more viable alternative by employing high continuity elements based on Non-Uniform Rational B-Splines (NURBS) functions. Therefore, this paper presents a NURBS-based isogeometric formulation for buckling and free vibration analyses of functionally graded plates using a HSDTs. A series of tests were conducted to assess the accuracy of this formulation considering examples available in the literature with different geometries, boundary conditions, and materials. The obtained results present excellent agreement with the reference solutions for thin and thick plates.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessIsogeometric Analysis of Functionally Graded Plates using High-Order Theories
Functionally Graded Materials are composites, usually of ceramic and metal, in which the volume fraction of their constituents varies smoothly along an interest direction. These materials were initially proposed as a solution for thermal barriers development, but are currently used in different applications. The composition variation results in a gradual change in their properties, enhancing the performance of structures subjected to thermal and mechanical loads, but making structural analysis more complex. Plates, on the other hand, are three-dimensional flat structures in which the thickness is much smaller than their other two dimensions. Different theories have been proposed for structural analysis of plates. These theories can be grouped based on the considerations adopted for the behavior of transverse shear deformations. In this regard, there are the Kirchoff-Love Theory (also known as the Classical Plate Theory - CPT), which disregards the effect of these deformations, the Reissner-Mindlin Theory (also known as the First-Order Shear Deformation Theory - FSDT), which considers shear deformations constant throughout the plate thickness, and Higher-Order Shear Deformation Theories (HSDT’s), which consider a nonlinear variation of shear deformations through different approaches. Among these theories, the most robust and accurate ones are evidently the HSDT’s. However, it is important to clarify that they require the displacement field to have a C1 continuity, which is complex for isoparametric finite elements. Thus, Isogeometric Analysis emerges as a more viable alternative by employing high continuity elements based on Non-Uniform Rational B-Splines (NURBS) functions. Therefore, this paper presents a NURBS-based isogeometric formulation for buckling and free vibration analyses of functionally graded plates using a HSDTs. A series of tests were conducted to assess the accuracy of this formulation considering examples available in the literature with different geometries, boundary conditions, and materials. The obtained results present excellent agreement with the reference solutions for thin and thick plates.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Backcalculation of asphalt pavement materials’ moduli considering absolute and relative errors
Backcalculation is a procedure used to estimate the material properties of pavement layers from the results of non-destructive tests, such as the Falling Weight Deflectometer (FWD). This procedure is important to assess the quality of a pavement structure during its construction and/or to monitor its condition during its lifespan. The Finite Element Method (FEM) can be used to evaluate the pavement deflections, provided that the loading, geometry, and material properties of each pavement layer are known. Thus, assuming a linear elastic behavior and known Poisson’s ratios and layer thicknesses, the backcalculation procedure consists of the determination of the set of elastic moduli that minimize the differences between the simulated (FEM) and measured (FWD) deflections. Different error measures can be adopted to assess the quality of the model fitting. The resulting Nonlinear Least Squares (NLS) problem can be solved using classical algorithms, such as Gauss-Newton and Levenberg–Marquardt methods. However, these algorithms present convergence problems for NLS with large errors. In this case, it can be necessary to use of hybrid algorithms based on a combination of Gauss-Newton and BFGS methods. The robustness, accuracy, and computational efficiency of classical and hybrid algorithms are compared in the backcalculation of asphalt pavements.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessBackcalculation of asphalt pavement materials’ moduli considering absolute and relative errors
Backcalculation is a procedure used to estimate the material properties of pavement layers from the results of non-destructive tests, such as the Falling Weight Deflectometer (FWD). This procedure is important to assess the quality of a pavement structure during its construction and/or to monitor its condition during its lifespan. The Finite Element Method (FEM) can be used to evaluate the pavement deflections, provided that the loading, geometry, and material properties of each pavement layer are known. Thus, assuming a linear elastic behavior and known Poisson’s ratios and layer thicknesses, the backcalculation procedure consists of the determination of the set of elastic moduli that minimize the differences between the simulated (FEM) and measured (FWD) deflections. Different error measures can be adopted to assess the quality of the model fitting. The resulting Nonlinear Least Squares (NLS) problem can be solved using classical algorithms, such as Gauss-Newton and Levenberg–Marquardt methods. However, these algorithms present convergence problems for NLS with large errors. In this case, it can be necessary to use of hybrid algorithms based on a combination of Gauss-Newton and BFGS methods. The robustness, accuracy, and computational efficiency of classical and hybrid algorithms are compared in the backcalculation of asphalt pavements.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Study of the influence of geometric imperfections and residual stresses on the stability of steel columns subjected to axial compression
Steel columns are known to provide strength, durability, flexibility, and greater speed of construction. Although being industrially produced under rigorous quality control, steel columns usually present small geometric imperfections and residual stresses that arise during the manufacturing process. These imperfections and residual stresses play a major role on the columns` final compressive strength. Acknowledging the complexities and high cost involved in experimental investigation of these effects, this research was geared towards assessing the influence of the geometric imperfections and residual stresses on the strength of steel columns subjected to axial compression. For this purpose, computational models of I-beam steel columns were developed and analyzed using the Finite Element Method. Initially, a linearized elastic buckling analysis was carried out to determine the critical loads (eigenvalues) and buckling modes (eigenvectors). Following this, nonlinear analyses were conducted considering materially and geometrically nonlinear effects to evaluate the column’s strength considering the geometric imperfections with different amplitudes and the shape of the first buckling mode. The elastoplastic model without hardening was adopted to represent the material nonlinearity. Finally, nonlinear analyses were carried out considering different levels of residual stresses for each geometric imperfection amplitude. The results show that the geometric imperfections and residual stresses have a strong influence on the load carrying capacity steel columns leading to a column curve close to the curve adopted by NBR 8800:2008. Therefore, both geometric imperfections and residual stresses should be properly considered in advanced analysis procedures for steel structures.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessStudy of the influence of geometric imperfections and residual stresses on the stability of steel columns subjected to axial compression
Steel columns are known to provide strength, durability, flexibility, and greater speed of construction. Although being industrially produced under rigorous quality control, steel columns usually present small geometric imperfections and residual stresses that arise during the manufacturing process. These imperfections and residual stresses play a major role on the columns` final compressive strength. Acknowledging the complexities and high cost involved in experimental investigation of these effects, this research was geared towards assessing the influence of the geometric imperfections and residual stresses on the strength of steel columns subjected to axial compression. For this purpose, computational models of I-beam steel columns were developed and analyzed using the Finite Element Method. Initially, a linearized elastic buckling analysis was carried out to determine the critical loads (eigenvalues) and buckling modes (eigenvectors). Following this, nonlinear analyses were conducted considering materially and geometrically nonlinear effects to evaluate the column’s strength considering the geometric imperfections with different amplitudes and the shape of the first buckling mode. The elastoplastic model without hardening was adopted to represent the material nonlinearity. Finally, nonlinear analyses were carried out considering different levels of residual stresses for each geometric imperfection amplitude. The results show that the geometric imperfections and residual stresses have a strong influence on the load carrying capacity steel columns leading to a column curve close to the curve adopted by NBR 8800:2008. Therefore, both geometric imperfections and residual stresses should be properly considered in advanced analysis procedures for steel structures.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Finite prism approach for stability analysis of laminated glass fins
The use of laminated glass (LG) as a structural material for load-bearing components within buildings has been growing over the last decades. LG can be obtained by bonding two or more pieces of glass by means of polymeric interlayers (e.g., poly vinyl butyral – PVB). This building process gives LG elements a huge advantage over the same ones made of fully monolithic glass with respect to safety, since after breakage the fragments usually remain attached to the interlayer, reducing the risk of injuries. As LG members usually present a high slenderness, they are susceptible to flexural buckling under compression, requiring specific calculation methods and verification procedures in order to guarantee appropriate and safe structural performance. Compared to literature, this work presents a novel approach that is focused on the prediction of the elastic critical buckling load of LG columns without any lateral restraints at the tensioned edges. The buckling loads of LG columns have been determined using Finite Element Method, generally using shell elements, or analytical models. Usually, such approaches make use of the concept of effective thickness, in which the thickness of a monolithic element with equivalent bending properties in terms of stress and deflection is employed. However, the effective thickness approach is either difficult to apply or inaccurate. Therefore, this work presents an efficient and accurate approach to evaluate elastic critical buckling loads of LG columns applying Finite Prism Method (FPM). The accuracy of the proposed approach is assessed comparing the results obtained using solid finite element and analytical models for fully monolithic glass columns, as well as LG columns composed by multiple glass layers.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessFinite prism approach for stability analysis of laminated glass fins
The use of laminated glass (LG) as a structural material for load-bearing components within buildings has been growing over the last decades. LG can be obtained by bonding two or more pieces of glass by means of polymeric interlayers (e.g., poly vinyl butyral – PVB). This building process gives LG elements a huge advantage over the same ones made of fully monolithic glass with respect to safety, since after breakage the fragments usually remain attached to the interlayer, reducing the risk of injuries. As LG members usually present a high slenderness, they are susceptible to flexural buckling under compression, requiring specific calculation methods and verification procedures in order to guarantee appropriate and safe structural performance. Compared to literature, this work presents a novel approach that is focused on the prediction of the elastic critical buckling load of LG columns without any lateral restraints at the tensioned edges. The buckling loads of LG columns have been determined using Finite Element Method, generally using shell elements, or analytical models. Usually, such approaches make use of the concept of effective thickness, in which the thickness of a monolithic element with equivalent bending properties in terms of stress and deflection is employed. However, the effective thickness approach is either difficult to apply or inaccurate. Therefore, this work presents an efficient and accurate approach to evaluate elastic critical buckling loads of LG columns applying Finite Prism Method (FPM). The accuracy of the proposed approach is assessed comparing the results obtained using solid finite element and analytical models for fully monolithic glass columns, as well as LG columns composed by multiple glass layers.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Local and distortional buckling of thin-walled laminated lipped channel columns
The great versatility in manufacturing and handling, as well as the mechanical capacity in structural applications, lead to the increase in the application of composites in various engineering applications, including aerospace industry, automotive industry, renewable energy, and civil construction. Due to the high strength and stiffness of fiber reinforced composites, they are mostly used to manufacture thin-walled structural components. It is already known that buckling plays a significant role in the design of thin-walled structures subjected to compressive loads, such that failure can occur with stresses much lower than the material mechanical strength. Thus, the design of many structural components is carried out considering constraints related to stability along with traditional criteria of strength and stiffness. This work focus on the stability analysis of laminated lipped channel columns. These columns present three main buckling modes: local, distortional, and global. It is important to note that the buckling loads of laminated open-section columns with arbitrary layup can be accurately computed using the Finite Element Method. However, the application of this approach to trace the signature curve of composite columns with channel sections is cumbersome and presents a high computational cost. Therefore, this work presents a simple, efficient, and accurate methodology to evaluate the local and distortional buckling load of laminated channel columns applying the Rayleigh-Ritz method. The accuracy of the proposed approach is assessed comparing the results obtained using the Finite Strip Method, Finite Element Method, and experimental data available in the literature.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessLocal and distortional buckling of thin-walled laminated lipped channel columns
The great versatility in manufacturing and handling, as well as the mechanical capacity in structural applications, lead to the increase in the application of composites in various engineering applications, including aerospace industry, automotive industry, renewable energy, and civil construction. Due to the high strength and stiffness of fiber reinforced composites, they are mostly used to manufacture thin-walled structural components. It is already known that buckling plays a significant role in the design of thin-walled structures subjected to compressive loads, such that failure can occur with stresses much lower than the material mechanical strength. Thus, the design of many structural components is carried out considering constraints related to stability along with traditional criteria of strength and stiffness. This work focus on the stability analysis of laminated lipped channel columns. These columns present three main buckling modes: local, distortional, and global. It is important to note that the buckling loads of laminated open-section columns with arbitrary layup can be accurately computed using the Finite Element Method. However, the application of this approach to trace the signature curve of composite columns with channel sections is cumbersome and presents a high computational cost. Therefore, this work presents a simple, efficient, and accurate methodology to evaluate the local and distortional buckling load of laminated channel columns applying the Rayleigh-Ritz method. The accuracy of the proposed approach is assessed comparing the results obtained using the Finite Strip Method, Finite Element Method, and experimental data available in the literature.