Monai Krairiksh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Monai Krairiksh has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Chuwong Phongcharoenpanich
School of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand
15 shared publications - Hoang Nam Dao
High-Tech Telecommunication Center, Hanoi, Vietnam
4 shared publications Phaophak Sirisuk
School of Engineering, King Mongkuts Institute of Technology Ladkrabang, Bangkok, Thailand
3 shared publications- Titipong Lertwiriyaprapa
Research Center of Innovation Digital and Electromagnetic Technology (iDEMT), Department of Teacher Training in Electrical Engineering, Faculty of Technical Education, King Mongkut’s University of Technology North Bangkok
3 shared publications - Chainarong Kittiyanpunya
Faculty of Engineering, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand
2 shared publications - Denchai Worasawate
Department of Electrical Engineering, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand
2 shared publications
Latest Publications
- 7 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (12) , 21535-21545
Single-Frequency Sensor for Thick Rind Fruit Quality Assessment
A sensor capable of estimating the dielectric properties of the outer and inner materials of a concentric dielectric sphere is essential for assessing the quality of thick rind fruits. This paper presents a sensor design that operates at a single frequency and is straightforward. The underlying principle of the sensor involves transmitting a microwave signal to a concentric dielectric sphere with two power levels. The low-power signal yields backscattered wave from the outer sphere, while the high-power signal provides information about backscattered wave from both the outer and inner spheres. The sensor, which operates at a frequency of 10 GHz using cost-effective components, effectively detects defects in spherical-shape fruits, e.g. mangosteens. The accuracy in classifying translucent mangosteens from normal mangosteens is 92.5 % enables effective classification of defected fruits.
- 7 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (12) , 21535-21545
Single-Frequency Sensor for Thick Rind Fruit Quality Assessment
A sensor capable of estimating the dielectric properties of the outer and inner materials of a concentric dielectric sphere is essential for assessing the quality of thick rind fruits. This paper presents a sensor design that operates at a single frequency and is straightforward. The underlying principle of the sensor involves transmitting a microwave signal to a concentric dielectric sphere with two power levels. The low-power signal yields backscattered wave from the outer sphere, while the high-power signal provides information about backscattered wave from both the outer and inner spheres. The sensor, which operates at a frequency of 10 GHz using cost-effective components, effectively detects defects in spherical-shape fruits, e.g. mangosteens. The accuracy in classifying translucent mangosteens from normal mangosteens is 92.5 % enables effective classification of defected fruits.
- Open Access
- 13 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 4, 900-911
Broadband Multi-Shaped Metasurface Circularly Polarized Antenna With Suppressed Non-CP Radiation Modes
In this research, a multi-shaped metasurface broadband circularly polarized (CP) patch antenna with parasitic elements is proposed for 5G new radio (NR) applications. The proposed metasurface CP patch antenna comprises triple-layered substrates without air gap. The upper layer sits with multi-shaped metasurface elements and parasitic patches. The middle layer consists of an L-shaped slot functioning as the ground plane, and the lower layer contains a microstrip and a fan-shaped stub functioning as the feed line. The proposed metasurface CP patch antenna with parasitic elements is evaluated using characteristic mode analysis (CMA). The CMA results indicate that the modal significance of Modes 1 and 2 of the multi-shaped metasurface CP antenna are orthogonal, giving rise to circular polarization. The non-CP radiation of Modes 3 and 4 are suppressed by using the multi-shaped metasurface elements and parasitic patches. The measured impedance bandwidth and axial ratio bandwidth are 42.85% (3.4 -4.9 GHz) and 38% (3.27 -4.6 GHz), achieving the maximum gain of 7.23 dBic at 3.7 GHz. The experiments demonstrate that the multi-shaped metasurface CP patch antenna with parasitic elements is suitable for 5G NR wireless applications. The novelty of this study is attributed to its utilization of multi-shaped metasurface elements and parasitic patches, which effectively suppress non-circularly polarized radiation modes.
- 13 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 4, 900-911
Open AccessBroadband Multi-Shaped Metasurface Circularly Polarized Antenna With Suppressed Non-CP Radiation Modes
In this research, a multi-shaped metasurface broadband circularly polarized (CP) patch antenna with parasitic elements is proposed for 5G new radio (NR) applications. The proposed metasurface CP patch antenna comprises triple-layered substrates without air gap. The upper layer sits with multi-shaped metasurface elements and parasitic patches. The middle layer consists of an L-shaped slot functioning as the ground plane, and the lower layer contains a microstrip and a fan-shaped stub functioning as the feed line. The proposed metasurface CP patch antenna with parasitic elements is evaluated using characteristic mode analysis (CMA). The CMA results indicate that the modal significance of Modes 1 and 2 of the multi-shaped metasurface CP antenna are orthogonal, giving rise to circular polarization. The non-CP radiation of Modes 3 and 4 are suppressed by using the multi-shaped metasurface elements and parasitic patches. The measured impedance bandwidth and axial ratio bandwidth are 42.85% (3.4 -4.9 GHz) and 38% (3.27 -4.6 GHz), achieving the maximum gain of 7.23 dBic at 3.7 GHz. The experiments demonstrate that the multi-shaped metasurface CP patch antenna with parasitic elements is suitable for 5G NR wireless applications. The novelty of this study is attributed to its utilization of multi-shaped metasurface elements and parasitic patches, which effectively suppress non-circularly polarized radiation modes.
- Open Access
- 10 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 14511-14523
CMA-Based Quadruple-Cluster Leaf-Shaped Metasurface-Based Wideband Circularly-Polarized Stacked-Patch Antenna Array for Sub-6 GHz 5G Applications
This research proposes a quadruple-cluster leaf-shaped metasurface (MTS)-based circularly-polarized (CP) stacked-patch antenna array with hybrid coupler feed network for sub-6 GHz 5G applications. In the study, the leaf-shaped MTS-based CP stacked-patch antenna is characterized by characteristic mode analysis (CMA). In the antenna design, one cluster of the quadruple-cluster leaf-shaped MTS-based antenna array consists of 4 × 4 leaf-shaped MTS elements; and the hybrid coupler feed network is used to enhance impedance bandwidth (IBW), axial ratio bandwidth (ARBW), and antenna gain. Simulations are carried out and an antenna prototype is fabricated and experiments undertaken. The measured IBW, ARBW, and maximum gain at the center frequency (4 GHz) are 62.5% (3.4 – 5.9 GHz), 21% (3.8 – 4.54 GHz), and 9.04 dBic at 3.9 GHz. The novelty of this research lies in the use of: (i) the CMA concept to design and develop the leaf-shaped wideband MTS-based stacked-patch antenna with CP radiation pattern; and (ii) a low-complexity hybrid coupler feed network to enhance the IBW, ARBW and gain.
- 10 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 14511-14523
Open AccessCMA-Based Quadruple-Cluster Leaf-Shaped Metasurface-Based Wideband Circularly-Polarized Stacked-Patch Antenna Array for Sub-6 GHz 5G Applications
This research proposes a quadruple-cluster leaf-shaped metasurface (MTS)-based circularly-polarized (CP) stacked-patch antenna array with hybrid coupler feed network for sub-6 GHz 5G applications. In the study, the leaf-shaped MTS-based CP stacked-patch antenna is characterized by characteristic mode analysis (CMA). In the antenna design, one cluster of the quadruple-cluster leaf-shaped MTS-based antenna array consists of 4 × 4 leaf-shaped MTS elements; and the hybrid coupler feed network is used to enhance impedance bandwidth (IBW), axial ratio bandwidth (ARBW), and antenna gain. Simulations are carried out and an antenna prototype is fabricated and experiments undertaken. The measured IBW, ARBW, and maximum gain at the center frequency (4 GHz) are 62.5% (3.4 – 5.9 GHz), 21% (3.8 – 4.54 GHz), and 9.04 dBic at 3.9 GHz. The novelty of this research lies in the use of: (i) the CMA concept to design and develop the leaf-shaped wideband MTS-based stacked-patch antenna with CP radiation pattern; and (ii) a low-complexity hybrid coupler feed network to enhance the IBW, ARBW and gain.
- Open Access
- 15 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 130825-130838
CMA-Based Four-Element Broadband Circularly Polarized Octagonal-Ring Slot Antenna Array for S-Band Satellite Applications
This research proposes a low-complexity and low-profile four-element circularly polarized (CP) octagonal-ring slot antenna array with sequentially-rotated feed network for S-band satellite applications. The proposed antenna array is characterized by characteristic mode analysis (CMA). One single element of the CP octagonal-ring slot antenna array consists of a C-shaped monopole on the upper layer functioning as the radiating patch; and an octagonal-ring slot patch on the lower layer functioning as the ground plane. The four elements are connected by a sequentially-rotated feed network to enhance the impedance bandwidth (IBW), axial ratio bandwidth (ARBW), and gain. Simulations are performed, and an antenna prototype is fabricated and experiments carried out. The measured IBW and ARBW at the center frequency of 2.4 GHz are 91.6% (1.8 – 4 GHz) and 84.5% (1.97 – 4 GHz), with the maximum gain of 7.8 dBic at 3.3 GHz, rendering the proposed four-element CP octagonal-ring slot antenna array with sequentially-rotated feed network operationally suitable for S-band satellite communication. The novelty of this research lies in the use of CMA to characterize the circular polarization of the octagonal-ring slot antenna array; and the sequentially-rotated feed network to enhance the IBW, ARBW, and antenna gain of the four-element CP octagonal-ring slot antenna array with sequentially-rotated feed network.
- 15 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 130825-130838
Open AccessCMA-Based Four-Element Broadband Circularly Polarized Octagonal-Ring Slot Antenna Array for S-Band Satellite Applications
This research proposes a low-complexity and low-profile four-element circularly polarized (CP) octagonal-ring slot antenna array with sequentially-rotated feed network for S-band satellite applications. The proposed antenna array is characterized by characteristic mode analysis (CMA). One single element of the CP octagonal-ring slot antenna array consists of a C-shaped monopole on the upper layer functioning as the radiating patch; and an octagonal-ring slot patch on the lower layer functioning as the ground plane. The four elements are connected by a sequentially-rotated feed network to enhance the impedance bandwidth (IBW), axial ratio bandwidth (ARBW), and gain. Simulations are performed, and an antenna prototype is fabricated and experiments carried out. The measured IBW and ARBW at the center frequency of 2.4 GHz are 91.6% (1.8 – 4 GHz) and 84.5% (1.97 – 4 GHz), with the maximum gain of 7.8 dBic at 3.3 GHz, rendering the proposed four-element CP octagonal-ring slot antenna array with sequentially-rotated feed network operationally suitable for S-band satellite communication. The novelty of this research lies in the use of CMA to characterize the circular polarization of the octagonal-ring slot antenna array; and the sequentially-rotated feed network to enhance the IBW, ARBW, and antenna gain of the four-element CP octagonal-ring slot antenna array with sequentially-rotated feed network.
- Open Access
- 17 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 54516-54524
Simple and Effective Design Concept for Constructing In-Situ Soil Dielectric Property Sensor With Dual Low-Cost COTS Microwave Modules
This paper presents a compact sensor system for estimating the dielectric properties of materials based on commercial, off-the-shelf (COTS) modules. The dielectric constant and conductivity of a material under test can be determined from the measurement of the microwave reflected from the material. By using dual microwave sensor modules with a slightly different radio frequency, an identical intermediate frequency at the mixers of the modules was obtained. The intermediate frequency was chosen such that the associated microwave and data processing components could be easily obtainable, leading to a practical realization of the sensor system. Synchronization of the two microwave sensor modules was achieved using electronically controlled relays that simultaneously switch on the power supplies of both modules. Two microcontrollers were used to capture the corresponding signals. The sensor was designed at a 10 GHz band for measuring reflected waves from various kinds of materials, especially soils with different moisture and fertilizer contents. The evaluation results indicate a good agreement between the measured results from the proposed sensor and the ones from a network analyzer, verifying that the proposed sensor is fully functional for monitoring variation in the dielectric properties of materials, including soil. The average sensitivity for the dielectric constant of moist soil is 0.26/% moisture content and the error rate for dielectric constant measurement is 4.83%.
- 17 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 54516-54524
Open AccessSimple and Effective Design Concept for Constructing In-Situ Soil Dielectric Property Sensor With Dual Low-Cost COTS Microwave Modules
This paper presents a compact sensor system for estimating the dielectric properties of materials based on commercial, off-the-shelf (COTS) modules. The dielectric constant and conductivity of a material under test can be determined from the measurement of the microwave reflected from the material. By using dual microwave sensor modules with a slightly different radio frequency, an identical intermediate frequency at the mixers of the modules was obtained. The intermediate frequency was chosen such that the associated microwave and data processing components could be easily obtainable, leading to a practical realization of the sensor system. Synchronization of the two microwave sensor modules was achieved using electronically controlled relays that simultaneously switch on the power supplies of both modules. Two microcontrollers were used to capture the corresponding signals. The sensor was designed at a 10 GHz band for measuring reflected waves from various kinds of materials, especially soils with different moisture and fertilizer contents. The evaluation results indicate a good agreement between the measured results from the proposed sensor and the ones from a network analyzer, verifying that the proposed sensor is fully functional for monitoring variation in the dielectric properties of materials, including soil. The average sensitivity for the dielectric constant of moist soil is 0.26/% moisture content and the error rate for dielectric constant measurement is 4.83%.
- Open Access
- 10 May 2022
- Published by MDPI AG in Electronics
- Vol. 11 (10) , 1521
Approximated Backscattered Wave Models of a Lossy Concentric Dielectric Sphere for Fruit Characterization
Approximated models of electromagnetic waves scattered from a sphere with two different dielectric layers were developed and reported in this paper. We proposed that the dielectric properties of a concentric dielectric sphere object, for example, some types of fruit, could be estimated by this model, from some wave components of the backscattered wave. The models were suitable for lossy objects because only a single bounce of the wave was assumed. In terms of first bounce as well as total backscattered wave results, the reported values agreed well with the values calculated by a commercial software. The measurement results verified the calculated wave components. The dielectric properties determination of real fruits was performed and exhibited the potential in fruit characterization. The main advantage of these models is that they can provide the magnitude and phase information of each backscattered wave component, which makes quality monitoring of fruits to be possible.
- 10 May 2022
- Published by MDPI AG in Electronics
- Vol. 11 (10) , 1521
Open AccessApproximated Backscattered Wave Models of a Lossy Concentric Dielectric Sphere for Fruit Characterization
Approximated models of electromagnetic waves scattered from a sphere with two different dielectric layers were developed and reported in this paper. We proposed that the dielectric properties of a concentric dielectric sphere object, for example, some types of fruit, could be estimated by this model, from some wave components of the backscattered wave. The models were suitable for lossy objects because only a single bounce of the wave was assumed. In terms of first bounce as well as total backscattered wave results, the reported values agreed well with the values calculated by a commercial software. The measurement results verified the calculated wave components. The dielectric properties determination of real fruits was performed and exhibited the potential in fruit characterization. The main advantage of these models is that they can provide the magnitude and phase information of each backscattered wave component, which makes quality monitoring of fruits to be possible.
- Open Access
- 17 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 31970-31980
Dual-Band Circularly Polarized Omni-Directional Biconical Antenna With Double-Circular Parallelepiped Elements for WLAN Applications
This research proposes a novel dual-band (2.45/5.80 GHz) omnidirectional circularly polarized (CP) biconical antenna with double-circular parasitic parallelepiped elements for wireless local area network (WLAN) applications. The proposed dual-band CP antenna scheme consisted of a biconical radiating structure surrounded by inner- and outer-circular parallelepiped elements that convert linearly polarized electric fields into CP fields. Simulations were performed to optimize the antenna parameters, and an antenna prototype was fabricated and experiments were conducted. The measured impedance bandwidths (IBWs) were 44.4% (1.84 – 2.89 GHz) and 4.56% (5.73 – 5.99 GHz) for the lower- (2.4 GHz) and upper-frequency (5.80 GHz) bands, respectively. The corresponding 3-dB axial ratio bandwidths (ARBWs) were 11.22% (2.27 – 2.54 GHz) and 10.49% (5.6 – 6.2 GHz). The radiation patterns of the dual-band antenna scheme were omnidirectional left-hand circular polarization, with the measured antenna gains of 3.2 dBic and 8.5 dBic at 2.45 and 5.80 GHz, respectively. The simulated and measured results were reasonably agreeable. Despite the narrow IBW and ARBW for the upper-frequency band, the bandwidths adequately covered the target upper frequency band, rendering the proposed CP omnidirectional biconical antenna scheme operationally suitable for WLAN applications. Furthermore, the novelty of this research lies in the use of a biconical radiating structure augmented with double-circular parasitic parallelepiped elements to realize circular polarization for dual-band WLAN applications.
- 17 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 31970-31980
Open AccessDual-Band Circularly Polarized Omni-Directional Biconical Antenna With Double-Circular Parallelepiped Elements for WLAN Applications
This research proposes a novel dual-band (2.45/5.80 GHz) omnidirectional circularly polarized (CP) biconical antenna with double-circular parasitic parallelepiped elements for wireless local area network (WLAN) applications. The proposed dual-band CP antenna scheme consisted of a biconical radiating structure surrounded by inner- and outer-circular parallelepiped elements that convert linearly polarized electric fields into CP fields. Simulations were performed to optimize the antenna parameters, and an antenna prototype was fabricated and experiments were conducted. The measured impedance bandwidths (IBWs) were 44.4% (1.84 – 2.89 GHz) and 4.56% (5.73 – 5.99 GHz) for the lower- (2.4 GHz) and upper-frequency (5.80 GHz) bands, respectively. The corresponding 3-dB axial ratio bandwidths (ARBWs) were 11.22% (2.27 – 2.54 GHz) and 10.49% (5.6 – 6.2 GHz). The radiation patterns of the dual-band antenna scheme were omnidirectional left-hand circular polarization, with the measured antenna gains of 3.2 dBic and 8.5 dBic at 2.45 and 5.80 GHz, respectively. The simulated and measured results were reasonably agreeable. Despite the narrow IBW and ARBW for the upper-frequency band, the bandwidths adequately covered the target upper frequency band, rendering the proposed CP omnidirectional biconical antenna scheme operationally suitable for WLAN applications. Furthermore, the novelty of this research lies in the use of a biconical radiating structure augmented with double-circular parasitic parallelepiped elements to realize circular polarization for dual-band WLAN applications.
- 29 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (5) , 3672-3679
Object Detection of Ground-Penetrating Radar in the Frequency Domain Using Three-Antenna System
An object detection method of ground-penetrating radar (GPR) in the frequency domain using three-antenna system is proposed in this study. The presented methodology utilizes the electromagnetic (EM) scattering from the object for identification using its natural poles. Two schemes of GPR system were examined. The first scheme was the conventional GPR comprising one transmitter and one receiver. The second scheme comprises two transmitters and one receiver, which the transmitters were excited by out-of-phase generators with each other. The simulations were initially performed using the three-antenna system for GPR. The results indicated that the natural poles in the scattering responses changed according to the characteristics of the object. For comparison, the three-antenna system for GPR was fabricated and experimented in comparison with the conventional GPR configuration. The experimental results revealed that the three-antenna configuration was able to mitigate the ground bounce and antenna coupling effects, while the conventional GPR was interfered by the effect of ground reflection and mutual coupling of the antennas. The three-antenna configuration is thus suitable to be the front-end before extracting the natural poles. In addition, the frequency domain method is compatible with the three-antenna system in the determination of the natural poles for identification. As such, the proposed system for investigating the response in the frequency domain is operationally appropriate in GPR system.
- 29 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (5) , 3672-3679
Object Detection of Ground-Penetrating Radar in the Frequency Domain Using Three-Antenna System
An object detection method of ground-penetrating radar (GPR) in the frequency domain using three-antenna system is proposed in this study. The presented methodology utilizes the electromagnetic (EM) scattering from the object for identification using its natural poles. Two schemes of GPR system were examined. The first scheme was the conventional GPR comprising one transmitter and one receiver. The second scheme comprises two transmitters and one receiver, which the transmitters were excited by out-of-phase generators with each other. The simulations were initially performed using the three-antenna system for GPR. The results indicated that the natural poles in the scattering responses changed according to the characteristics of the object. For comparison, the three-antenna system for GPR was fabricated and experimented in comparison with the conventional GPR configuration. The experimental results revealed that the three-antenna configuration was able to mitigate the ground bounce and antenna coupling effects, while the conventional GPR was interfered by the effect of ground reflection and mutual coupling of the antennas. The three-antenna configuration is thus suitable to be the front-end before extracting the natural poles. In addition, the frequency domain method is compatible with the three-antenna system in the determination of the natural poles for identification. As such, the proposed system for investigating the response in the frequency domain is operationally appropriate in GPR system.
- Open Access
- 15 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 226142-226150
Narrow-Beam Antenna for Short-Distance Non-Destructive Sensor in Fruit-Ripeness Monitoring
Radiation pattern subtraction is a useful technique for narrowing a receiving antenna’s radiation pattern in a short-distance, non-destructive sensor. The sensor’s antenna was developed to be compact and light-weight as well as to operate in real-time. This work applied the principle of radiation pattern subtraction to narrow the beamwidth of an antenna. Our experimental data demonstrated that a simple narrow-beam three-element antenna with a 35° half-power beamwidth and a small size of 5.9×6.5 cm2 could be realized. In the experiment, the radiation pattern of an array antenna (consisting of two halfwave dipoles with a reflector) was subtracted from the radiation pattern of an element antenna (consisting of a halfwave dipole with a reflector) for the three-element antenna to achieve a narrow beamwidth and compact size. The antenna had a simple feeding network that operated at 10.525 GHz and 35° half-power beamwidth. The angular resolution of the receiving antenna was tested with mango fruits: it was able to resolve an 80 mm separation between the fruit of interest and the nearby fruit, which was sufficient, in terms of practicality, for mitigating the interfering effect of nearby fruits to the fruit of interest. This type of antenna is useful as a short-distance, non-destructive sensor such as a pre-harvest sensor.
- 15 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 226142-226150
Open AccessNarrow-Beam Antenna for Short-Distance Non-Destructive Sensor in Fruit-Ripeness Monitoring
Radiation pattern subtraction is a useful technique for narrowing a receiving antenna’s radiation pattern in a short-distance, non-destructive sensor. The sensor’s antenna was developed to be compact and light-weight as well as to operate in real-time. This work applied the principle of radiation pattern subtraction to narrow the beamwidth of an antenna. Our experimental data demonstrated that a simple narrow-beam three-element antenna with a 35° half-power beamwidth and a small size of 5.9×6.5 cm2 could be realized. In the experiment, the radiation pattern of an array antenna (consisting of two halfwave dipoles with a reflector) was subtracted from the radiation pattern of an element antenna (consisting of a halfwave dipole with a reflector) for the three-element antenna to achieve a narrow beamwidth and compact size. The antenna had a simple feeding network that operated at 10.525 GHz and 35° half-power beamwidth. The angular resolution of the receiving antenna was tested with mango fruits: it was able to resolve an 80 mm separation between the fruit of interest and the nearby fruit, which was sufficient, in terms of practicality, for mitigating the interfering effect of nearby fruits to the fruit of interest. This type of antenna is useful as a short-distance, non-destructive sensor such as a pre-harvest sensor.
- 6 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 69 (10) , 7617-7626
Dual-Frequency Sensor for Thick Rind Fruit Quality Assessment
- 6 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 69 (10) , 7617-7626
Dual-Frequency Sensor for Thick Rind Fruit Quality Assessment