Frédéric Miranville
Frédéric Miranville has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Harry Boyer
PIMENT Laboratory, University of Reunion Island, 120 Avenue Raymond BARRE, 97430 Le Tampon, Reunion Island, France
6 shared publications - Bruno Malet-Damour
PIMENT Laboratory, University of Reunion Island, 120 Avenue Raymond Barre, 97430 Le Tampon, La Réunion, France
3 shared publications - Dimitri Bigot
PIMENT Laboratory, University of Reunion Island, 120 Avenue Raymond Barre, 97430 Le Tampon, La Réunion, France
3 shared publications - Stéphane Guichard
Research Institute in Innovation and Business Sciences (IRISE) Laboratory\CESI-CCIR\CRITT The CESI engineering school Campus Pro -CCIR 65 rue du Père Lafosse-Boîte n°4 97410 Saint-Pierre FRANCE
3 shared publications Ali Hamada Fakra
University of Reunion, Physics and Mathematical Engineering Laboratory for Energy and Environment (PIMENT), 117, rue du Général Ailleret 97 430 Le Tampon, France
1 shared publicationDimitri Bigot
University of Reunion, Physics and Mathematical Engineering Laboratory for Energy and Environment (PIMENT), 117, rue du Général Ailleret 97 430 Le Tampon, France
1 shared publication
Latest Publications
- 1 January 2017
- Published by EJournal Publishing in Journal of Clean Energy Technologies
- Vol. 5 (1) , 73-76
Performance Testing of Light Pipes in Real Weather Conditions for a Confrontation with Hemera
- 1 January 2017
- Published by EJournal Publishing in Journal of Clean Energy Technologies
- Vol. 5 (1) , 73-76
Performance Testing of Light Pipes in Real Weather Conditions for a Confrontation with Hemera
- Open Access
Empirical Validation of a Thermal Model of a Complex Roof Including Phase Change Materials
This paper deals with the empirical validation of a building thermal model using a phase change material (PCM) in a complex roof. A mathematical model dedicated to phase change materials based on the heat apparent capacity method was implemented in a multi-zone building simulation code, the aim being to increase understanding of the thermal behavior of the whole building with PCM technologies. To empirically validate the model, the methodology is based both on numerical and experimental studies. A parametric sensitivity analysis was performed and a set of parameters of the thermal model have been identified for optimization. The use of a generic optimization program called GenOpt coupled to the building simulation code enabled to determine the set of adequate parameters. We first present the empirical validation methodology and main results of previous work. We then give an overview of GenOpt and its coupling with the building simulation code. Finally, once the optimization results are obtained, comparisons of thermal model of PCM with measurements are found to be acceptable and are presented.
Open AccessEmpirical Validation of a Thermal Model of a Complex Roof Including Phase Change Materials
This paper deals with the empirical validation of a building thermal model using a phase change material (PCM) in a complex roof. A mathematical model dedicated to phase change materials based on the heat apparent capacity method was implemented in a multi-zone building simulation code, the aim being to increase understanding of the thermal behavior of the whole building with PCM technologies. To empirically validate the model, the methodology is based both on numerical and experimental studies. A parametric sensitivity analysis was performed and a set of parameters of the thermal model have been identified for optimization. The use of a generic optimization program called GenOpt coupled to the building simulation code enabled to determine the set of adequate parameters. We first present the empirical validation methodology and main results of previous work. We then give an overview of GenOpt and its coupling with the building simulation code. Finally, once the optimization results are obtained, comparisons of thermal model of PCM with measurements are found to be acceptable and are presented.
- Open Access
Empirical Validation of a Thermal Model of a Complex Roof Including Phase Change Materials
This paper deals with the empirical validation of a building thermal model of a complex roof including a phase change material (PCM). A mathematical model dedicated to PCMs based on the heat apparent capacity method was implemented in a multi-zone building simulation code, the aim being to increase the understanding of the thermal behavior of the whole building with PCM technologies. In order to empirically validate the model, the methodology is based both on numerical and experimental studies. A parametric sensitivity analysis was performed and a set of parameters of the thermal model has been identified for optimization. The use of the generic optimization program called GenOpt® coupled to the building simulation code enabled to determine the set of adequate parameters. We first present the empirical validation methodology and main results of previous work. We then give an overview of GenOpt® and its coupling with the building simulation code. Finally, once the optimization results are obtained, comparisons of the thermal predictions with measurements are found to be acceptable and are presented.
Open AccessEmpirical Validation of a Thermal Model of a Complex Roof Including Phase Change Materials
This paper deals with the empirical validation of a building thermal model of a complex roof including a phase change material (PCM). A mathematical model dedicated to PCMs based on the heat apparent capacity method was implemented in a multi-zone building simulation code, the aim being to increase the understanding of the thermal behavior of the whole building with PCM technologies. In order to empirically validate the model, the methodology is based both on numerical and experimental studies. A parametric sensitivity analysis was performed and a set of parameters of the thermal model has been identified for optimization. The use of the generic optimization program called GenOpt® coupled to the building simulation code enabled to determine the set of adequate parameters. We first present the empirical validation methodology and main results of previous work. We then give an overview of GenOpt® and its coupling with the building simulation code. Finally, once the optimization results are obtained, comparisons of the thermal predictions with measurements are found to be acceptable and are presented.
- Open Access
Numerical evaluation of the thermal performances of roof-mounted radiant barriers
This paper deals with the thermal performances of roof-mounted radiant barriers. Using dynamic simulations of a mathematical model of a whole test cell including a radiant barrier installed between the roof top and the ceiling, the thermal performance of the roof is calculated. The mean method is more particularly used to assess the thermal resistance of the building component and lead to a value which is compared to the one obtained for a mass insulation product such as polyurethane foam. On a further stage, the thermal mathematical model is replaced by a thermo-aeraulic model which is used to evaluate the thermal resistance of the roof as a function of the airflow rate. The results shows a better performance of the roof in this new configuration, which is widely used in practice. Finally, the mathematical relation between the thermal resistance and the airflow rate is proposed.
Open AccessNumerical evaluation of the thermal performances of roof-mounted radiant barriers
This paper deals with the thermal performances of roof-mounted radiant barriers. Using dynamic simulations of a mathematical model of a whole test cell including a radiant barrier installed between the roof top and the ceiling, the thermal performance of the roof is calculated. The mean method is more particularly used to assess the thermal resistance of the building component and lead to a value which is compared to the one obtained for a mass insulation product such as polyurethane foam. On a further stage, the thermal mathematical model is replaced by a thermo-aeraulic model which is used to evaluate the thermal resistance of the roof as a function of the airflow rate. The results shows a better performance of the roof in this new configuration, which is widely used in practice. Finally, the mathematical relation between the thermal resistance and the airflow rate is proposed.
- 7 April 2011
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 133 (2) , 021009
A Simplified Model for Radiative Transfer in Building Enclosures With Low Emissivity Walls: Development and Application to Radiant Barrier Insulation
This paper deals with a simplified model of radiative heat transfer in building enclosures with low emissivity walls. The approach is based on an existing simplified model, well known and used in building multizone simulation codes, for the long wave exchanges in building enclosures. This method is simply extended to the case of a cavity including a very low emissivity wall, and it is shown that the obtained formalism is similar to the one used in the case of the based model, convenient for enclosures with only black walls (blackbody assumption). The proposed model has been integrated into a building simulation code and is based on simple examples; it is shown that intermediate results between the imprecise initial simple model and the more precise detailed model, the net-radiosity method, can be obtained. Finally, an application of the model is made for an existing experimental test cell including a radiant barrier insulation product, well used in Reunion Island for thermal insulation of roofs. With an efficacy based on the very low emissivity of their surfaces and the consequent decrease in radiative heat transfer through the wall in which they are included, the proposed simplified model leads to results very close to those of the reference method, the net-radiosity method.
- 7 April 2011
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 133 (2) , 021009
A Simplified Model for Radiative Transfer in Building Enclosures With Low Emissivity Walls: Development and Application to Radiant Barrier Insulation
This paper deals with a simplified model of radiative heat transfer in building enclosures with low emissivity walls. The approach is based on an existing simplified model, well known and used in building multizone simulation codes, for the long wave exchanges in building enclosures. This method is simply extended to the case of a cavity including a very low emissivity wall, and it is shown that the obtained formalism is similar to the one used in the case of the based model, convenient for enclosures with only black walls (blackbody assumption). The proposed model has been integrated into a building simulation code and is based on simple examples; it is shown that intermediate results between the imprecise initial simple model and the more precise detailed model, the net-radiosity method, can be obtained. Finally, an application of the model is made for an existing experimental test cell including a radiant barrier insulation product, well used in Reunion Island for thermal insulation of roofs. With an efficacy based on the very low emissivity of their surfaces and the consequent decrease in radiative heat transfer through the wall in which they are included, the proposed simplified model leads to results very close to those of the reference method, the net-radiosity method.
- 12 September 2005
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 128 (2) , 213-225
Bayesian Parameter Estimation of Convective Heat Transfer Coefficients of a Roof-Mounted Radiant Barrier System
This paper deals with the application of Bayesian methods to the estimation of two convective heat-transfer coefficients of a roof-mounted radiant barrier system. As part of an empirical validation of the thermal model of the roofing complex, a parametric sensitivity analysis highlighted the importance of convective coefficients in the thermal behavior of a roofing complex. A parameter estimation method is then used in order to find the values of the coefficients that lead to an improvement of the thermal model. However, instead of using a classical parameter estimation method, we used a Bayesian inference approach to parameter estimation. The aim of the paper is to introduce the basic concepts of this powerful method in this simple two-parameter case. We show that Bayesian methods introduce an explicit treatment of uncertainty in modeling and a corresponding measure of reliability for the conclusions reached.
- 12 September 2005
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 128 (2) , 213-225
Bayesian Parameter Estimation of Convective Heat Transfer Coefficients of a Roof-Mounted Radiant Barrier System
This paper deals with the application of Bayesian methods to the estimation of two convective heat-transfer coefficients of a roof-mounted radiant barrier system. As part of an empirical validation of the thermal model of the roofing complex, a parametric sensitivity analysis highlighted the importance of convective coefficients in the thermal behavior of a roofing complex. A parameter estimation method is then used in order to find the values of the coefficients that lead to an improvement of the thermal model. However, instead of using a classical parameter estimation method, we used a Bayesian inference approach to parameter estimation. The aim of the paper is to introduce the basic concepts of this powerful method in this simple two-parameter case. We show that Bayesian methods introduce an explicit treatment of uncertainty in modeling and a corresponding measure of reliability for the conclusions reached.
- 4 June 2003
- Published by Elsevier in Energy and Buildings
- Vol. 35 (10) , 997-1008
On the thermal behaviour of roof-mounted radiant barriers under tropical and humid climatic conditions: modelling and empirical validation
- 4 June 2003
- Published by Elsevier in Energy and Buildings
- Vol. 35 (10) , 997-1008
On the thermal behaviour of roof-mounted radiant barriers under tropical and humid climatic conditions: modelling and empirical validation