David Kwong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
David Kwong has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Ray T. Chen
Department of Electrical and Computer Engineering, The University of Texas at Austin, Austin, USA
5 shared publications - Amir Hosseini
Omega Optics, Inc., 10306 Sausalito Dr., Austin, Texas 78759, USA
3 shared publications Yang Zhang
University of Texas at Austin, Austin, TX, USA
3 shared publicationsAmir Hosseini
Omega Optics, Inc, 10306 Sausalito Dr., Austin, Texas 78759, USA
2 shared publicationsJohn Covey
Microelectronics Research Center, Department of Electrical and Computer Engineering, University of Texas at Austin, 10100 Burnet Rd., Austin, Texas 78758, USA
2 shared publications- John Covey
Department of Electrical and Computer Engineering, The University of Texas at Austin, 10100 Burnet Rd, Austin, Texas 78758, USA
2 shared publications
Latest Publications
- 10 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 26 (23) , 2376-2379
0.88-THz Optical Clock Distribution on Adhesively Bonded Silicon Nanomembrane
Silicon photonics is a promising solution for on-chip optical clock distribution. We developed an adhesive bonding process to integrate silicon nanomembranes onto silicon chips. The single-mode strip waveguide fabricated on this adhesively bonded silicon membrane has a propagation loss of 4.3 dB/cm. A grating-coupled 1-to-32 H-tree optical distribution is experimentally demonstrated. Each branch includes 1.1-cm long strip waveguides, five Y-splitters, and three 90° bends. This optical distribution has a insertion loss of 13.9 dB, uniformity of 0.72 dB, and 3-dB bandwidth of 880 GHz determined by optical autocorrelation.
- 10 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 26 (23) , 2376-2379
0.88-THz Optical Clock Distribution on Adhesively Bonded Silicon Nanomembrane
Silicon photonics is a promising solution for on-chip optical clock distribution. We developed an adhesive bonding process to integrate silicon nanomembranes onto silicon chips. The single-mode strip waveguide fabricated on this adhesively bonded silicon membrane has a propagation loss of 4.3 dB/cm. A grating-coupled 1-to-32 H-tree optical distribution is experimentally demonstrated. Each branch includes 1.1-cm long strip waveguides, five Y-splitters, and three 90° bends. This optical distribution has a insertion loss of 13.9 dB, uniformity of 0.72 dB, and 3-dB bandwidth of 880 GHz determined by optical autocorrelation.
- 10 February 2014
- Published by Optica Publishing Group in Optics Letters
- Vol. 39 (4) , 941-944
On-chip silicon optical phased array for two-dimensional beam steering
A 16-element optical phased array integrated on chip is presented for achieving two-dimensional (2D) optical beam steering. The device is fabricated on the silicon-on-insulator platform with a 250 nm silicon device layer. Steering is achieved via a combination of wavelength tuning and thermo-optic phase shifting with a switching power of per channel. Using a silicon waveguide grating with a polycrystalline silicon overlay enables narrow far field beam widths while mitigating the precise etching needed for conventional shallow etch gratings. Using this system, 2D steering across a field of view is achieved with a sidelobe level better than 10 dB and with beam widths of .- 10 February 2014
- Published by Optica Publishing Group in Optics Letters
- Vol. 39 (4) , 941-944
On-chip silicon optical phased array for two-dimensional beam steering
A 16-element optical phased array integrated on chip is presented for achieving two-dimensional (2D) optical beam steering. The device is fabricated on the silicon-on-insulator platform with a 250 nm silicon device layer. Steering is achieved via a combination of wavelength tuning and thermo-optic phase shifting with a switching power of per channel. Using a silicon waveguide grating with a polycrystalline silicon overlay enables narrow far field beam widths while mitigating the precise etching needed for conventional shallow etch gratings. Using this system, 2D steering across a field of view is achieved with a sidelobe level better than 10 dB and with beam widths of .- 20 November 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 20 (4) , 171-180
Cavity-Waveguide Coupling Engineered High Sensitivity Silicon Photonic Crystal Microcavity Biosensors With High Yield
We present a high yield and high sensitivity on-chip biosensing system by combining subwavelength grating coupling and high sensitivity photonic crystal microcavity side coupled to a photonic crystal waveguide. 80% yield of working devices was experimentally demonstrated for sensitivity engineered L13 photonic crystal microcavities and 70% for L21 photonic crystal microcavities. Subwavelength grating couplers significantly improved the quality of the output transmission spectrum. By engineering the optical loss rate from the cavity to the waveguide, we experimentally detected 1 pM (67 pg/ml) and 50 femto-molar (3.35 pg/ml) concentration of avidin binding to biotin in phosphate buffered saline for L21 and L55 PC microcavities respectively, which represents the highest sensitivity versus other chip-based optical biosensors.
- 20 November 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 20 (4) , 171-180
Cavity-Waveguide Coupling Engineered High Sensitivity Silicon Photonic Crystal Microcavity Biosensors With High Yield
We present a high yield and high sensitivity on-chip biosensing system by combining subwavelength grating coupling and high sensitivity photonic crystal microcavity side coupled to a photonic crystal waveguide. 80% yield of working devices was experimentally demonstrated for sensitivity engineered L13 photonic crystal microcavities and 70% for L21 photonic crystal microcavities. Subwavelength grating couplers significantly improved the quality of the output transmission spectrum. By engineering the optical loss rate from the cavity to the waveguide, we experimentally detected 1 pM (67 pg/ml) and 50 femto-molar (3.35 pg/ml) concentration of avidin binding to biotin in phosphate buffered saline for L21 and L55 PC microcavities respectively, which represents the highest sensitivity versus other chip-based optical biosensors.
- 6 September 2012
- Published by Optica Publishing Group in Optics Express
- Vol. 20 (19) , 21722-21728
Ultralow-loss polycrystalline silicon waveguides and high uniformity 1x12 MMI fanout for 3D photonic integration
We have investigated the feasibility of multimode polysilicon waveguides to demonstrate the suitability of polysilicon as a candidate for multilayer photonic applications. Solid Phase Crystallization (SPC) with a maximum temperature of 1000°C is used to create polysilicon on thermally grown SiO2. We then measure the propagation losses for various waveguide widths on both polysilicon and crystalline silicon platforms. We find that as the width increases for polysilicon waveguides, the propagation loss decreases similar to crystalline silicon waveguides. At a waveguide width of 10µm, polysilicon and crystalline silicon waveguides have propagation losses of 0.56dB/cm and 0.31 dB/cm, respectively, indicating there is little bulk absorption from the polysilicon and is the lowest propagation loss for polysilicon demonstrated to date. In addition, the first 1x12 polysilicon MMI is demonstrated with a low insertion loss of −1.29dB and a high uniformity of 1.07dB. These results vindicate the use of polysilicon waveguides of varying widths in photonic integrated circuits.
- 6 September 2012
- Published by Optica Publishing Group in Optics Express
- Vol. 20 (19) , 21722-21728
Ultralow-loss polycrystalline silicon waveguides and high uniformity 1x12 MMI fanout for 3D photonic integration
We have investigated the feasibility of multimode polysilicon waveguides to demonstrate the suitability of polysilicon as a candidate for multilayer photonic applications. Solid Phase Crystallization (SPC) with a maximum temperature of 1000°C is used to create polysilicon on thermally grown SiO2. We then measure the propagation losses for various waveguide widths on both polysilicon and crystalline silicon platforms. We find that as the width increases for polysilicon waveguides, the propagation loss decreases similar to crystalline silicon waveguides. At a waveguide width of 10µm, polysilicon and crystalline silicon waveguides have propagation losses of 0.56dB/cm and 0.31 dB/cm, respectively, indicating there is little bulk absorption from the polysilicon and is the lowest propagation loss for polysilicon demonstrated to date. In addition, the first 1x12 polysilicon MMI is demonstrated with a low insertion loss of −1.29dB and a high uniformity of 1.07dB. These results vindicate the use of polysilicon waveguides of varying widths in photonic integrated circuits.
- 23 June 2010
- Published by IOP Publishing in Journal of Optics
- Vol. 12 (7)
Tapered multi-mode interference couplers for high order mode power extraction
- 23 June 2010
- Published by IOP Publishing in Journal of Optics
- Vol. 12 (7)
Tapered multi-mode interference couplers for high order mode power extraction
- 1 January 2009
- Published by Defense Technical Information Center (DTIC)
Delay Time Enhanced Flat Band Photonic Crystal Waveguides with Capsule-shaped Holes on Silicon Nanomembrane
A slow group velocity and low group velocity dispersion photonic crystal slab waveguide is designed by using capsule shaped air holes in hexagonal lattice. The theoretical study shows that adjusting the aspect ratio of holes in the innermost rows can fine tune the dispersion tail. The presented design can achieve nearly flat band photonic crystal waveguides with group index of 21-36 over the normalized bandwidth (delta omega/omega) of 1.38%0.4%. We also discuss the effects of the change in the holes' aspect ratio combined with a slight size adjustment. The group index in the range of 2143 for normalized bandwidth of about 1.5%0.3% is obtained with the combination effect. The optimized designed exhibits a nearly constant group index of 21 over 22.7 nanometer bandwidth at lambda=1.55 micrometers.
- 1 January 2009
- Published by Defense Technical Information Center (DTIC)
Delay Time Enhanced Flat Band Photonic Crystal Waveguides with Capsule-shaped Holes on Silicon Nanomembrane
A slow group velocity and low group velocity dispersion photonic crystal slab waveguide is designed by using capsule shaped air holes in hexagonal lattice. The theoretical study shows that adjusting the aspect ratio of holes in the innermost rows can fine tune the dispersion tail. The presented design can achieve nearly flat band photonic crystal waveguides with group index of 21-36 over the normalized bandwidth (delta omega/omega) of 1.38%0.4%. We also discuss the effects of the change in the holes' aspect ratio combined with a slight size adjustment. The group index in the range of 2143 for normalized bandwidth of about 1.5%0.3% is obtained with the combination effect. The optimized designed exhibits a nearly constant group index of 21 over 22.7 nanometer bandwidth at lambda=1.55 micrometers.