Stefano Nebuloni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Stefano Nebuloni has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- John Richard Thome
Laboratory of Heat and Mass Transfer (LTCM), Faculty of Engineering (STI), École Polytechnique Fédérale de Lausanne (EPFL), Station 9, Lausanne CH-1015, Switzerland
3 shared publications Davide Del Col
University of Padova, Padova, Italy
1 shared publicationJohn R. Thome
Laboratory of Heat and Mass Transfer (LTCM),Swiss Federal Institute of Technology,Lausanne (EPFL), Lausanne CH-1015, Switzerland
1 shared publication
Latest Publications
- 13 April 2012
- Published by Wiley in Journal of Heat Transfer
- Vol. 134 (5) , 051021
Numerical Modeling of the Conjugate Heat Transfer Problem for Annular Laminar Film Condensation in Microchannels
This paper presents numerical simulations of annular laminar film condensation heat transfer in microchannels of different internal shapes. The model, which is based on a finite volume formulation of the Navier–Stokes and energy equations for the liquid phase only, importantly accounts for the effects of axial and peripheral wall conduction and nonuniform heat flux not included in other models so far in the literature. The contributions of the surface tension, axial shear stresses, and gravitational forces are included. This model has so far been validated versus various benchmark cases and versus experimental data available in literature, predicting microchannel heat transfer data with an average error of 20% or better. It is well known that the thinning of the condensate film induced by surface tension due to gravity forces and shape of the surface, also known as the “Gregorig” effect, has a strong consequence on the local heat transfer coefficient in condensation. Thus, the present model accounts for these effects on the heat transfer and pressure drop for a wide variety of geometrical shapes, sizes, wall materials, and working fluid properties. In this paper, the conjugate heat transfer problem arising from the coupling between the thin film fluid dynamics, the heat transfer in the condensing fluid, and the heat conduction in the channel wall has been studied. In particular, the work has focused on three external channel wall boundary conditions: a uniform wall temperature, a nonuniform wall heat flux, and single-phase convective cooling are presented. As the scale of the problem is reduced, i.e., when moving from mini- to microchannels, the results show that the axial conduction effects can become very important in the prediction of the wall temperature profile and the magnitude of the heat transfer coefficient and its distribution along the channel.
- 13 April 2012
- Published by Wiley in Journal of Heat Transfer
- Vol. 134 (5) , 051021
Numerical Modeling of the Conjugate Heat Transfer Problem for Annular Laminar Film Condensation in Microchannels
This paper presents numerical simulations of annular laminar film condensation heat transfer in microchannels of different internal shapes. The model, which is based on a finite volume formulation of the Navier–Stokes and energy equations for the liquid phase only, importantly accounts for the effects of axial and peripheral wall conduction and nonuniform heat flux not included in other models so far in the literature. The contributions of the surface tension, axial shear stresses, and gravitational forces are included. This model has so far been validated versus various benchmark cases and versus experimental data available in literature, predicting microchannel heat transfer data with an average error of 20% or better. It is well known that the thinning of the condensate film induced by surface tension due to gravity forces and shape of the surface, also known as the “Gregorig” effect, has a strong consequence on the local heat transfer coefficient in condensation. Thus, the present model accounts for these effects on the heat transfer and pressure drop for a wide variety of geometrical shapes, sizes, wall materials, and working fluid properties. In this paper, the conjugate heat transfer problem arising from the coupling between the thin film fluid dynamics, the heat transfer in the condensing fluid, and the heat conduction in the channel wall has been studied. In particular, the work has focused on three external channel wall boundary conditions: a uniform wall temperature, a nonuniform wall heat flux, and single-phase convective cooling are presented. As the scale of the problem is reduced, i.e., when moving from mini- to microchannels, the results show that the axial conduction effects can become very important in the prediction of the wall temperature profile and the magnitude of the heat transfer coefficient and its distribution along the channel.
- 1 January 2010
- Published by ASME International
- p. 245-252
Conjugate Heat Transfer in Annular Laminar Film Condensation in Microchannels: Comparison of Numerical Model to Experimental Results
A comparison of the recently proposed numerical model for annular laminar film condensation heat transfer in microchannels of different internal shapes (circular, square, rectangular, etc.), including the effects of conjugate heat conduction in the channel walls, is made versus recent independent experimental results experiencing this effect. Notably, the thinning of the condensate film induced by surface tension due to gravity forces and shape of the surface, also known as the ‘Grigorig’ effect, has a strong consequence on the local heat transfer coefficient in condensation. The model, which is based on a finite volume formulation of the Navier-Stokes and energy equations for the liquid phase only, accounts for the contributions of the surface tension, axial shear stresses and gravitational forces and for the conjugate effects of axial and peripheral wall conduction and nonuniform heat flux. The model was previously validated versus experimental data available in the literature without accounting for conjugate effects, predicting microchannel heat transfer data to within 20% or better. Specifically, the updated version of the model includes the coupling between the thin film fluid dynamics, the heat transfer in the condensing fluid and the heat conduction in the channel wall. Since it is imperative to demonstrate that numerical heat transfer models are accurate and reliable, the present paper focuses on validating this new conjugate model versus recent actual experimental data for various small channels and test fluids experiencing this effect. The results are very encouraging and are presented here.
- 1 January 2010
- Published by ASME International
- p. 245-252
Conjugate Heat Transfer in Annular Laminar Film Condensation in Microchannels: Comparison of Numerical Model to Experimental Results
A comparison of the recently proposed numerical model for annular laminar film condensation heat transfer in microchannels of different internal shapes (circular, square, rectangular, etc.), including the effects of conjugate heat conduction in the channel walls, is made versus recent independent experimental results experiencing this effect. Notably, the thinning of the condensate film induced by surface tension due to gravity forces and shape of the surface, also known as the ‘Grigorig’ effect, has a strong consequence on the local heat transfer coefficient in condensation. The model, which is based on a finite volume formulation of the Navier-Stokes and energy equations for the liquid phase only, accounts for the contributions of the surface tension, axial shear stresses and gravitational forces and for the conjugate effects of axial and peripheral wall conduction and nonuniform heat flux. The model was previously validated versus experimental data available in the literature without accounting for conjugate effects, predicting microchannel heat transfer data to within 20% or better. Specifically, the updated version of the model includes the coupling between the thin film fluid dynamics, the heat transfer in the condensing fluid and the heat conduction in the channel wall. Since it is imperative to demonstrate that numerical heat transfer models are accurate and reliable, the present paper focuses on validating this new conjugate model versus recent actual experimental data for various small channels and test fluids experiencing this effect. The results are very encouraging and are presented here.
- 1 January 2009
- Published by ASME International
- p. 129-137
Numerical Modeling of the Conjugate Heat Transfer Problem for Annular Laminar Film Condensation in Microchannels
This paper presents numerical simulations of annular laminar film condensation heat transfer in micro-channels of different internal shapes. The model, which is based on a finite volume formulation of the Navier-Stokes and energy equations for the liquid phase only, importantly accounts for the effects of axial and peripheral wall conduction and non-uniform heat flux not included in other models so far in the literature. The contributions of the surface tension, axial shear stresses and gravitational forces are included. This model has so far been validated versus various benchmark cases and versus experimental data available in literature, predicting microchannel heat transfer data with an average error of 20% or better. It is well-known that the thinning of the condensate film induced by surface tension due to gravity forces and shape of the surface, also known as the ‘Grigorig’ effect, has a strong consequence on the local heat transfer coefficient in condensation. Thus, the present model accounts for these effects on the heat transfer and pressure drop for a wide variety of geometrical shapes, sizes, wall materials and working fluid properties. In this paper, the conjugate heat transfer problem arising from the coupling between the thin film fluid dynamics, the heat transfer in the condensing fluid and the heat conduction in the channel wall has been studied. In particular, the work has focused on three external channel wall boundary conditions: a uniform wall temperature, a non uniform wall heat flux and single-phase convective cooling is presented. As the scale of the problem is reduced, i.e. when moving from mini to micro channels, the results shows that the axial conduction effects can become very important in the prediction of the wall temperature profile and the magnitude of the heat transfer coefficient and its distribution along the channel.
- 1 January 2009
- Published by ASME International
- p. 129-137
Numerical Modeling of the Conjugate Heat Transfer Problem for Annular Laminar Film Condensation in Microchannels
This paper presents numerical simulations of annular laminar film condensation heat transfer in micro-channels of different internal shapes. The model, which is based on a finite volume formulation of the Navier-Stokes and energy equations for the liquid phase only, importantly accounts for the effects of axial and peripheral wall conduction and non-uniform heat flux not included in other models so far in the literature. The contributions of the surface tension, axial shear stresses and gravitational forces are included. This model has so far been validated versus various benchmark cases and versus experimental data available in literature, predicting microchannel heat transfer data with an average error of 20% or better. It is well-known that the thinning of the condensate film induced by surface tension due to gravity forces and shape of the surface, also known as the ‘Grigorig’ effect, has a strong consequence on the local heat transfer coefficient in condensation. Thus, the present model accounts for these effects on the heat transfer and pressure drop for a wide variety of geometrical shapes, sizes, wall materials and working fluid properties. In this paper, the conjugate heat transfer problem arising from the coupling between the thin film fluid dynamics, the heat transfer in the condensing fluid and the heat conduction in the channel wall has been studied. In particular, the work has focused on three external channel wall boundary conditions: a uniform wall temperature, a non uniform wall heat flux and single-phase convective cooling is presented. As the scale of the problem is reduced, i.e. when moving from mini to micro channels, the results shows that the axial conduction effects can become very important in the prediction of the wall temperature profile and the magnitude of the heat transfer coefficient and its distribution along the channel.
- 1 October 2007
- Published by Springer Nature in Microgravity Science and Technology
- Vol. 19 (3-4) , 125-127
Film condensation under normal and microgravity: Effect of channel shape
- 1 October 2007
- Published by Springer Nature in Microgravity Science and Technology
- Vol. 19 (3-4) , 125-127
Film condensation under normal and microgravity: Effect of channel shape