Masahiro Osako
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Masahiro Osako has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Kosuke Kawai
National Institute for Environmental Studies
4 shared publications Yong-Jin Kim
Department of Marine Environmental Engineering, Mokpo National Maritime University, 571-2 Chukkyo-dong, Mokpo, Jeonnam 530-729, South Korea
3 shared publications- Aya Yoshida
National Institute for Environmental Studies
2 shared publications Dong-Hoon Lee
Department of Environmental Engineering, The University of Seoul, Seoul, South Korea
2 shared publications- Kaoru Suzuki
National Institute of Advanced Industrial Science and Technology, Tsukuba 305-8565, Japan
2 shared publications - Kei Gomi
Fukushima Regional Collaborative Research Center National Institute for Environmental Studies Fukushima Japan
2 shared publications
Latest Publications
- Open Access
- 31 March 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (7) , 2919
A Framework for Analyzing Co-Creation Value Chain Mechanisms in Community-Based Approaches: A Literature Review
Community co-creation is critical for tackling complex challenges and building a sustainable future, and necessitates collaboration between public and private sectors to co-create value chains. This paper highlights existing frameworks and proposes a heuristic approach that integrates Collective Impact (CI), Social Impact Assessment (SIA), and Community Capital (CC). Through a narrative review, the paper explores how SIA and CC can empower CI by aligning objective data with community context, ensuring solutions that resonate with local needs, promoting equity by fostering inclusive participation and understanding diverse perspectives, and revealing valuable resources within communities and leveraging their strengths for sustainable development. Although the paper delves into roles and responsibilities for each sector involved in co-creation, it acknowledges limitations in areas such as leadership-capacity building for effective collaboration and long-term commitment, impact measurement methodologies that capture nuanced social change over time, and inclusion of diverse participation methods to ensure all voices are heard and represented. By addressing these limitations, the paper calls for further research and development to strengthen community-driven social change.
- 31 March 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (7) , 2919
Open AccessA Framework for Analyzing Co-Creation Value Chain Mechanisms in Community-Based Approaches: A Literature Review
Community co-creation is critical for tackling complex challenges and building a sustainable future, and necessitates collaboration between public and private sectors to co-create value chains. This paper highlights existing frameworks and proposes a heuristic approach that integrates Collective Impact (CI), Social Impact Assessment (SIA), and Community Capital (CC). Through a narrative review, the paper explores how SIA and CC can empower CI by aligning objective data with community context, ensuring solutions that resonate with local needs, promoting equity by fostering inclusive participation and understanding diverse perspectives, and revealing valuable resources within communities and leveraging their strengths for sustainable development. Although the paper delves into roles and responsibilities for each sector involved in co-creation, it acknowledges limitations in areas such as leadership-capacity building for effective collaboration and long-term commitment, impact measurement methodologies that capture nuanced social change over time, and inclusion of diverse participation methods to ensure all voices are heard and represented. By addressing these limitations, the paper calls for further research and development to strengthen community-driven social change.
- Open Access
- 19 May 2023
- Published by MDPI AG in Preprints.org
A Framework Analyzing Co-Creation Value Chain Mechanism in Community-Based Approach: A Literature Review
Community co-creation is increasingly crucial to the building of sustainable societies. Communities must proactively and independently create value chains in the face of many wicked problems. However, practical frameworks and tools for facilitating community co-creation require further development. As such, for this paper, we propose a theoretical framework for analyzing community co-creation value chain mechanisms based on a narrative review of literature on Collective Impact, social impact assessment, and Community Capital from the perspective of collective impact, a framework with a fair amount of previous research. We argue for the importance of applying knowledge of social impact assessment, particularly for the collective impact conditions of common agenda and shared measurement system. We discuss its relationship with the Theory of Change and the use of systems thinking to mitigate the subjectivity and arbitrariness of design thinking. Furthermore, we emphasize the value of employing the community capital concept as a framework for analyzing interrelationships among elements. By integrating multiple concepts, we enhance the collective impact framework and outline potential avenues for future research on analyzing and effectively implementing co-creation value chain mechanism in a community-based approach.
- 19 May 2023
- Published by MDPI AG in Preprints.org
Open AccessA Framework Analyzing Co-Creation Value Chain Mechanism in Community-Based Approach: A Literature Review
Community co-creation is increasingly crucial to the building of sustainable societies. Communities must proactively and independently create value chains in the face of many wicked problems. However, practical frameworks and tools for facilitating community co-creation require further development. As such, for this paper, we propose a theoretical framework for analyzing community co-creation value chain mechanisms based on a narrative review of literature on Collective Impact, social impact assessment, and Community Capital from the perspective of collective impact, a framework with a fair amount of previous research. We argue for the importance of applying knowledge of social impact assessment, particularly for the collective impact conditions of common agenda and shared measurement system. We discuss its relationship with the Theory of Change and the use of systems thinking to mitigate the subjectivity and arbitrariness of design thinking. Furthermore, we emphasize the value of employing the community capital concept as a framework for analyzing interrelationships among elements. By integrating multiple concepts, we enhance the collective impact framework and outline potential avenues for future research on analyzing and effectively implementing co-creation value chain mechanism in a community-based approach.
- Open Access
- 27 March 2022
- Published by Copernicus GmbH
Evaluation of fate and transport of macro- and micro-plastics in terrestrial-aquatic continuum of entire Japan by developing a spatio-temporally explicit eco-hydrology model
Contamination of plastic materials in our environment has received more attention from the public, scientists, and policy makers during the last few decades. Though some of the models have succeeded to simulate the transport and fate of plastic debris in freshwater systems, a complete model is under development to elucidate the whole picture of plastic dynamics in the basin scale. One of the authors has so far developed a process-based eco-hydrology model, NICE (National Integrated Catchment-based Eco-hydrology) (Nakayama and Watanabe, 2004) and NICE-BGC (BioGeochemical Cycle) (Nakayama, 2017), and applied them to various basins from local/regional to continental/global scales. NICE-BGC can simulate iteratively nonlinear interactions between hydrologic, geomorphic, and ecological processes (water, heat, sediment, nutrient, and carbon cycles, etc.) (Nakayama, 2020). In this study, the authors extended NICE-BGC to couple with plastic debris model for freshwater systems, and applied it to all the first-class river basins in entire Japan (109 river basins). The new model included the advection, dispersion, diffusion, settling, dissolution and deterioration due to light and temperature, but assumed no interaction with suspended matter (heteroaggregation), resuspension, biofouling, and effect of wind, etc. The authors also assumed plastics as pure and totally inert polymers and spherical particles with constant size and density for model simplification. NICE-BGC simulated how mismanaged plastic waste (MPW) of about 36,000 ton/yr (Meijer et al., 2021) and point sources such as tyres, personal care products (PCPs), dust, and laundry in the entire country are transported from land to river, and finally to the ocean. The model showed the total flux of macro- and micro-plastics varies dependent on the removal efficiency of micro-plastic in wastewater treatment plants and the density of plastic. It was clear that only limited plastics discharged to land flows out into the ocean intensively during rainfall seasons, similar to plastic loading estimates in the previous study (Nihei et al., 2020). These results help to quantify the impacts of plastic waste on terrestrial and aquatic ecosystems, and find solutions and measures to reduce plastic input to the ocean.
- 27 March 2022
- Published by Copernicus GmbH
Open AccessEvaluation of fate and transport of macro- and micro-plastics in terrestrial-aquatic continuum of entire Japan by developing a spatio-temporally explicit eco-hydrology model
Contamination of plastic materials in our environment has received more attention from the public, scientists, and policy makers during the last few decades. Though some of the models have succeeded to simulate the transport and fate of plastic debris in freshwater systems, a complete model is under development to elucidate the whole picture of plastic dynamics in the basin scale. One of the authors has so far developed a process-based eco-hydrology model, NICE (National Integrated Catchment-based Eco-hydrology) (Nakayama and Watanabe, 2004) and NICE-BGC (BioGeochemical Cycle) (Nakayama, 2017), and applied them to various basins from local/regional to continental/global scales. NICE-BGC can simulate iteratively nonlinear interactions between hydrologic, geomorphic, and ecological processes (water, heat, sediment, nutrient, and carbon cycles, etc.) (Nakayama, 2020). In this study, the authors extended NICE-BGC to couple with plastic debris model for freshwater systems, and applied it to all the first-class river basins in entire Japan (109 river basins). The new model included the advection, dispersion, diffusion, settling, dissolution and deterioration due to light and temperature, but assumed no interaction with suspended matter (heteroaggregation), resuspension, biofouling, and effect of wind, etc. The authors also assumed plastics as pure and totally inert polymers and spherical particles with constant size and density for model simplification. NICE-BGC simulated how mismanaged plastic waste (MPW) of about 36,000 ton/yr (Meijer et al., 2021) and point sources such as tyres, personal care products (PCPs), dust, and laundry in the entire country are transported from land to river, and finally to the ocean. The model showed the total flux of macro- and micro-plastics varies dependent on the removal efficiency of micro-plastic in wastewater treatment plants and the density of plastic. It was clear that only limited plastics discharged to land flows out into the ocean intensively during rainfall seasons, similar to plastic loading estimates in the previous study (Nihei et al., 2020). These results help to quantify the impacts of plastic waste on terrestrial and aquatic ecosystems, and find solutions and measures to reduce plastic input to the ocean.
- 1 January 2018
- Published by Japan Society of Waste Management Experts in Journal of the Japan Society of Material Cycles and Waste Management
- Vol. 29, 191-205
Resource Substitution and LCCO2 Evaluation by Material Flow Analysis of Incinerator Residue Recycling at a Centralized Reductive Melting Facility
- 1 January 2018
- Published by Japan Society of Waste Management Experts in Journal of the Japan Society of Material Cycles and Waste Management
- Vol. 29, 191-205
Resource Substitution and LCCO2 Evaluation by Material Flow Analysis of Incinerator Residue Recycling at a Centralized Reductive Melting Facility
- 1 January 2013
- Published by Japan Society for Analytical Chemistry in BUNSEKI KAGAKU
- Vol. 62 (6) , 485-497
Intra- and Inter-laboratory Comparison on Radiocesium in Radiation-contaminated Waste Samples: Results for Surface Soils, Fly Ash, Bottom Ash, and Molten Slag
東北地方太平洋沖地震に起因した福島第一原子力発電所における事故は,放射性物質の拡散をもたらし,放射性物質で汚染された廃棄物(放射性物質汚染廃棄物)の処理という困難な問題を生じている.喫緊の課題である放射性物質汚染廃棄物等の適正処理の確保には,放射性物質,特に放射性セシウム(134Cs, 137Cs)の精度の高い測定分析が必要である.本研究では,分析操作で留意すべき事項や精度改善の必要性等を確認するために,大量に発生している放射性物質で汚染された土壌と焼却灰に含まれる放射性セシウム分析について,国内の6試験所による試験所間比較を実施した.試験所間比較では,放射能濃度段階別に調製した土壌試料3種(道路脇,植え込み及び畑地から採取した土壌)及び焼却灰関連試料3種(飛灰,主灰,溶融スラグ)の放射性セシウムを,Ge半導体検出器,NaIあるいはLaBr3シンチレーション検出器で測定した.測定試料の放射能濃度レベルは,350~64000 Bq kg−1(134Cs+137Cs)程度であり,放射性物質汚染対処特措法に基づく指定基準(8000 Bq kg−1〔134Cs+137Cs〕)はこの範囲にはいる.試験所間比較に参加した試験所で得られた試験所内及び試験所間の測定データは,いずれの相対標準偏差も10% 以下と小さく,再現性良く取得されていることが示された.
- 1 January 2013
- Published by Japan Society for Analytical Chemistry in BUNSEKI KAGAKU
- Vol. 62 (6) , 485-497
Intra- and Inter-laboratory Comparison on Radiocesium in Radiation-contaminated Waste Samples: Results for Surface Soils, Fly Ash, Bottom Ash, and Molten Slag
東北地方太平洋沖地震に起因した福島第一原子力発電所における事故は,放射性物質の拡散をもたらし,放射性物質で汚染された廃棄物(放射性物質汚染廃棄物)の処理という困難な問題を生じている.喫緊の課題である放射性物質汚染廃棄物等の適正処理の確保には,放射性物質,特に放射性セシウム(134Cs, 137Cs)の精度の高い測定分析が必要である.本研究では,分析操作で留意すべき事項や精度改善の必要性等を確認するために,大量に発生している放射性物質で汚染された土壌と焼却灰に含まれる放射性セシウム分析について,国内の6試験所による試験所間比較を実施した.試験所間比較では,放射能濃度段階別に調製した土壌試料3種(道路脇,植え込み及び畑地から採取した土壌)及び焼却灰関連試料3種(飛灰,主灰,溶融スラグ)の放射性セシウムを,Ge半導体検出器,NaIあるいはLaBr3シンチレーション検出器で測定した.測定試料の放射能濃度レベルは,350~64000 Bq kg−1(134Cs+137Cs)程度であり,放射性物質汚染対処特措法に基づく指定基準(8000 Bq kg−1〔134Cs+137Cs〕)はこの範囲にはいる.試験所間比較に参加した試験所で得られた試験所内及び試験所間の測定データは,いずれの相対標準偏差も10% 以下と小さく,再現性良く取得されていることが示された.
- 29 February 2012
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 14 (2) , 94-101
Reduction of natural resource consumption in cement production in Japan by waste utilization
- 29 February 2012
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 14 (2) , 94-101
Reduction of natural resource consumption in cement production in Japan by waste utilization
- 1 January 2005
- Published by Elsevier in Waste Management
- Vol. 25 (7) , 694-701
Utilizing a database to interpret leaching characteristics of lead from bottom ashes of municipal solid waste incinerators
- 1 January 2005
- Published by Elsevier in Waste Management
- Vol. 25 (7) , 694-701
Utilizing a database to interpret leaching characteristics of lead from bottom ashes of municipal solid waste incinerators
- 1 December 2004
- Published by Elsevier in Chemosphere
- Vol. 57 (10) , 1571-1579
Leaching of brominated flame retardants in leachate from landfills in Japan
- 1 December 2004
- Published by Elsevier in Chemosphere
- Vol. 57 (10) , 1571-1579
Leaching of brominated flame retardants in leachate from landfills in Japan
- 1 January 2004
- Published by Elsevier in Waste Management
- Vol. 24 (8) , 815-823
Investigation on the humification of municipal solid waste incineration residue and its effect on the leaching behavior of dioxins
- 1 January 2004
- Published by Elsevier in Waste Management
- Vol. 24 (8) , 815-823
Investigation on the humification of municipal solid waste incineration residue and its effect on the leaching behavior of dioxins
- 1 January 2003
- Published by Japan Society of Waste Management Experts in Journal of the Japan Society of Waste Management Experts
- Vol. 14 (1) , 1-9
Comparison of Environmental Safety Management Systems for Recycled Materials Used in General Environment
循環型社会形成推進基本法が成立し, ますます再生利用等の重要性が認識されているが, 再生製品のなかに含まれる有害物質による環境汚染が懸念され, 再生利用の促進を阻害している。そこで, 一般環境中で利用され, 環境汚染の可能性が懸念される建設資材を中心に, 国内外における再生製品の環境安全性管理制度を比較した。その結果, (1) 再生製品と非再生製品, 廃棄物との環境安全性管理手法の関係, (2) 流通管理と利用管理, (3) 情報による有害物質管理, (4) 有害性に応じた段階的な環境安全性管理, (5) 土壌環境管理との関係, (6) 利用状況の想定, (7) 利用判定に用いる値の選定, (8) 現実的な管理の8項目が今後の制度設計において検討すべき課題と考えられた。さらに, これらの課題をふまえ, 2つの判定に基づいた再生製品の管理方法を示すなど, 今後の検討の方向性を提案した。
- 1 January 2003
- Published by Japan Society of Waste Management Experts in Journal of the Japan Society of Waste Management Experts
- Vol. 14 (1) , 1-9
Comparison of Environmental Safety Management Systems for Recycled Materials Used in General Environment
循環型社会形成推進基本法が成立し, ますます再生利用等の重要性が認識されているが, 再生製品のなかに含まれる有害物質による環境汚染が懸念され, 再生利用の促進を阻害している。そこで, 一般環境中で利用され, 環境汚染の可能性が懸念される建設資材を中心に, 国内外における再生製品の環境安全性管理制度を比較した。その結果, (1) 再生製品と非再生製品, 廃棄物との環境安全性管理手法の関係, (2) 流通管理と利用管理, (3) 情報による有害物質管理, (4) 有害性に応じた段階的な環境安全性管理, (5) 土壌環境管理との関係, (6) 利用状況の想定, (7) 利用判定に用いる値の選定, (8) 現実的な管理の8項目が今後の制度設計において検討すべき課題と考えられた。さらに, これらの課題をふまえ, 2つの判定に基づいた再生製品の管理方法を示すなど, 今後の検討の方向性を提案した。