Byung-Su Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Byung-Su Kim has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Jae-Chun Lee
Mineral Resources Research Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon, Republic of Korea
5 shared publications - Ji-Hyuk Choi
Korea Institute of Geoscience and Mineral Resources
3 shared publications - Jinki Jeong
Mineral Resources Resource Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Gwahangno 124, Yuseong-gu, Daejeon 305-350, Korea
3 shared publications Chang-Youl Suh
Resource & Materials Research Center, Resources Utilization Research Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon, Republic of Korea
2 shared publicationsHankwon Chang
Resource & Materials Research Center, Resources Utilization Research Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon, Republic of Korea
2 shared publicationsJeong-Soo Sohn
2 shared publications
Latest Publications
- 29 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (33) , 27069-27081
Graphene oxide dough composites: direct mixing and structural design strategies for high-performance electronics and energy applications
Achieving multifunctionality in nanocomposites requires both precise and straightforward strategies for compositional integration and structural design. However, the scalable and tunable incorporation of diverse nanomaterials, while enabling structural versatility, remains a significant challenge. In this study, we present a deformable, binder-free graphene oxide dough (GOD) platform that enables the uniform incorporation of various nanomaterials through straightforward mixing strategies. The viscoelastic GOD matrix facilitates both direct powder mixing (dough-to-powder) and composite-to-composite (dough-to-dough) integration, allowing for precise structural tuning from binary to quaternary composites. The resulting 3D frameworks exhibit dense architectures with interconnected conductive pathways and stable interfaces. Supercapacitor electrodes incorporating RuO2 nanoparticles and carbon nanotubes (CNTs) within the GOD matrix deliver outstanding volumetric capacitance (285 F cm−3 at 0.5 A g−1) and excellent high-rate performance (206 F cm−3 at 20 A g−1). Moreover, Fe2O3 nanoparticles and CNT-containing GOD composites achieve exceptional electromagnetic interference shielding effectiveness (81.3 dB), demonstrating mechanical robustness and functional integrity. This scalable and versatile composite platform offers fine control over composition and structure, establishing a promising direction for practical high-performance energy storage and electronic systems.
- 29 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (33) , 27069-27081
Graphene oxide dough composites: direct mixing and structural design strategies for high-performance electronics and energy applications
Achieving multifunctionality in nanocomposites requires both precise and straightforward strategies for compositional integration and structural design. However, the scalable and tunable incorporation of diverse nanomaterials, while enabling structural versatility, remains a significant challenge. In this study, we present a deformable, binder-free graphene oxide dough (GOD) platform that enables the uniform incorporation of various nanomaterials through straightforward mixing strategies. The viscoelastic GOD matrix facilitates both direct powder mixing (dough-to-powder) and composite-to-composite (dough-to-dough) integration, allowing for precise structural tuning from binary to quaternary composites. The resulting 3D frameworks exhibit dense architectures with interconnected conductive pathways and stable interfaces. Supercapacitor electrodes incorporating RuO2 nanoparticles and carbon nanotubes (CNTs) within the GOD matrix deliver outstanding volumetric capacitance (285 F cm−3 at 0.5 A g−1) and excellent high-rate performance (206 F cm−3 at 20 A g−1). Moreover, Fe2O3 nanoparticles and CNT-containing GOD composites achieve exceptional electromagnetic interference shielding effectiveness (81.3 dB), demonstrating mechanical robustness and functional integrity. This scalable and versatile composite platform offers fine control over composition and structure, establishing a promising direction for practical high-performance energy storage and electronic systems.
- 4 July 2022
- Published by Taylor & Francis in Geosystem Engineering
- Vol. 25 (3-4) , 202-207
A Novel Process for Manufacturing Vanadium Dioxide(VO2) as a resource of Vanadium Electrolyte from Vanadium Pentoxide(V2O5)
A vanadium electrolyte for energy storage is generally prepared by dissolving vanadium pentoxide (V2O5) in sulfuric acid using oxalic acid ((COOH)2) as a reducing agent. However, there is a disadvantage that the dissolution rate in the sulfuric acid solution of V2O5 is very slow. In this study, a new process for producing vanadium dioxide (VO2), which has the faster dissolution rate than V2O5 in sulfuric acid solution, was developed. Vanadium dioxide (VO2) could be used in the production of a vanadium electrolyte for energy storage. The process developed in the study has the advantages of being economical and simple as compared to the existing process for producing VO2 from V2O5 using hydrogen or carbon monoxide as a reducing agent.
- 4 July 2022
- Published by Taylor & Francis in Geosystem Engineering
- Vol. 25 (3-4) , 202-207
A Novel Process for Manufacturing Vanadium Dioxide(VO2) as a resource of Vanadium Electrolyte from Vanadium Pentoxide(V2O5)
A vanadium electrolyte for energy storage is generally prepared by dissolving vanadium pentoxide (V2O5) in sulfuric acid using oxalic acid ((COOH)2) as a reducing agent. However, there is a disadvantage that the dissolution rate in the sulfuric acid solution of V2O5 is very slow. In this study, a new process for producing vanadium dioxide (VO2), which has the faster dissolution rate than V2O5 in sulfuric acid solution, was developed. Vanadium dioxide (VO2) could be used in the production of a vanadium electrolyte for energy storage. The process developed in the study has the advantages of being economical and simple as compared to the existing process for producing VO2 from V2O5 using hydrogen or carbon monoxide as a reducing agent.
- Open Access
Investigating the Aluminothermic Process for Producing Ferrotitanium Alloy from Ilmenite Concentrate
The aluminothermic process is used for producing ferrotitanium alloy (FeTi) from an ilmenite concentrate. In this study, based on thermodynamic calculations and experiments, we investigated the effects of adding varying amounts of exothermal agent (NaClO3), slag-forming agent (CaO), and reducing agent (Al) on the recovery ratio of Ti in the aluminothermic process. The thermodynamic calculations suggested that the exothermal agent plays a crucial role in producing the FeTi alloy from the ilmenite concentrate and the maximum Ti grade in the FeTi alloy was approximately 30 wt %. Experimentally, it was verified that the FeTi alloy obtained under the optimum mixing conditions contained 30.2–30.8 wt % Ti, 1.1–1.3 wt % Si, 9.5–11.2 wt % Al, and 56.9–58.0 wt % Fe, along with trace impurities and small amounts of gases such as oxygen (0.35–0.66 wt %) and nitrogen (0.01–0.02 wt %). At the optimum mixing conditions, the recovery ratio of Ti into the obtained FeTi alloy phase was 60.6–68.9%. These results matched closely with the thermodynamic calculations. Therefore, the thermodynamic calculations performed herein are expected to significantly contribute toward the development of new processes and improvement in conventional processes for producing various ferroalloys including the FeTi alloy through the aluminothermic process.
Open AccessInvestigating the Aluminothermic Process for Producing Ferrotitanium Alloy from Ilmenite Concentrate
The aluminothermic process is used for producing ferrotitanium alloy (FeTi) from an ilmenite concentrate. In this study, based on thermodynamic calculations and experiments, we investigated the effects of adding varying amounts of exothermal agent (NaClO3), slag-forming agent (CaO), and reducing agent (Al) on the recovery ratio of Ti in the aluminothermic process. The thermodynamic calculations suggested that the exothermal agent plays a crucial role in producing the FeTi alloy from the ilmenite concentrate and the maximum Ti grade in the FeTi alloy was approximately 30 wt %. Experimentally, it was verified that the FeTi alloy obtained under the optimum mixing conditions contained 30.2–30.8 wt % Ti, 1.1–1.3 wt % Si, 9.5–11.2 wt % Al, and 56.9–58.0 wt % Fe, along with trace impurities and small amounts of gases such as oxygen (0.35–0.66 wt %) and nitrogen (0.01–0.02 wt %). At the optimum mixing conditions, the recovery ratio of Ti into the obtained FeTi alloy phase was 60.6–68.9%. These results matched closely with the thermodynamic calculations. Therefore, the thermodynamic calculations performed herein are expected to significantly contribute toward the development of new processes and improvement in conventional processes for producing various ferroalloys including the FeTi alloy through the aluminothermic process.
- Open Access
Use of Phosphate Solubilizing Bacteria to Leach Rare Earth Elements from Monazite-Bearing Ore
In the present study, the feasibility to use phosphate solubilizing bacteria (PSB) to develop a biological leaching process of rare earth elements (REE) from monazite-bearing ore was determined. To predict the REE leaching capacity of bacteria, the phosphate solubilizing abilities of 10 species of PSB were determined by halo zone formation on Reyes minimal agar media supplemented with bromo cresol green together with a phosphate solubilization test in Reyes minimal liquid media as the screening studies. Calcium phosphate was used as a model mineral phosphate. Among the test PSB strains, Pseudomonas fluorescens, P. putida, P. rhizosphaerae, Mesorhizobium ciceri, Bacillus megaterium, and Acetobacter aceti formed halo zones, with the zone of A. aceti being the widest. In the phosphate solubilization test in liquid media, Azospirillum lipoferum, P. rhizosphaerae, B. megaterium, and A. aceti caused the leaching of 6.4%, 6.9%, 7.5%, and 32.5% of calcium, respectively. When PSB were used to leach REE from monazite-bearing ore, ~5.7 mg/L of cerium (0.13% of leaching efficiency) and ~2.8 mg/L of lanthanum (0.11%) were leached by A. aceti, and Azospirillum brasilense, A. lipoferum, P. rhizosphaerae and M. ciceri leached 0.5–1 mg/L of both cerium and lanthanum (0.005%–0.01%), as measured by concentrations in the leaching liquor. These results indicate that determination of halo zone formation was found as a useful method to select high-capacity bacteria in REE leaching. However, as the leaching efficiency determined in our experiments was low, even in the presence of A. aceti, further studies are now underway to enhance leaching efficiency by selecting other microorganisms based on halo zone formation.
Open AccessUse of Phosphate Solubilizing Bacteria to Leach Rare Earth Elements from Monazite-Bearing Ore
In the present study, the feasibility to use phosphate solubilizing bacteria (PSB) to develop a biological leaching process of rare earth elements (REE) from monazite-bearing ore was determined. To predict the REE leaching capacity of bacteria, the phosphate solubilizing abilities of 10 species of PSB were determined by halo zone formation on Reyes minimal agar media supplemented with bromo cresol green together with a phosphate solubilization test in Reyes minimal liquid media as the screening studies. Calcium phosphate was used as a model mineral phosphate. Among the test PSB strains, Pseudomonas fluorescens, P. putida, P. rhizosphaerae, Mesorhizobium ciceri, Bacillus megaterium, and Acetobacter aceti formed halo zones, with the zone of A. aceti being the widest. In the phosphate solubilization test in liquid media, Azospirillum lipoferum, P. rhizosphaerae, B. megaterium, and A. aceti caused the leaching of 6.4%, 6.9%, 7.5%, and 32.5% of calcium, respectively. When PSB were used to leach REE from monazite-bearing ore, ~5.7 mg/L of cerium (0.13% of leaching efficiency) and ~2.8 mg/L of lanthanum (0.11%) were leached by A. aceti, and Azospirillum brasilense, A. lipoferum, P. rhizosphaerae and M. ciceri leached 0.5–1 mg/L of both cerium and lanthanum (0.005%–0.01%), as measured by concentrations in the leaching liquor. These results indicate that determination of halo zone formation was found as a useful method to select high-capacity bacteria in REE leaching. However, as the leaching efficiency determined in our experiments was low, even in the presence of A. aceti, further studies are now underway to enhance leaching efficiency by selecting other microorganisms based on halo zone formation.
- 30 April 2012
- Published by The Korean Institute of Resources Recycling in Resources Recycling
- Vol. 21 (2) , 3-8
Current Status of Pyrometallurgical Process for the Reclamation of Urban Ore
- 30 April 2012
- Published by The Korean Institute of Resources Recycling in Resources Recycling
- Vol. 21 (2) , 3-8
Current Status of Pyrometallurgical Process for the Reclamation of Urban Ore
- Open Access
- 1 January 2008
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 49 (8) , 1889-1892
Oxidative Sulfur Removal from Complex Copper Concentrate
- 1 January 2008
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 49 (8) , 1889-1892
Open AccessOxidative Sulfur Removal from Complex Copper Concentrate
- 1 January 2004
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 45 (6) , 1915-1919
Separation of Copper and Zinc Ions by Hollow Fiber Supported Liquid Membrane Containing LIX84 and PC-88A
- 1 January 2004
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 45 (6) , 1915-1919
Separation of Copper and Zinc Ions by Hollow Fiber Supported Liquid Membrane Containing LIX84 and PC-88A
- 1 January 2004
- Published by Taylor & Francis in JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
- Vol. 37 (9) , 1129-1134
Leaching of Nickel from a Hydrodesulphurization Spent Catalyst with Ammonium Sulfate
- 1 January 2004
- Published by Taylor & Francis in JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
- Vol. 37 (9) , 1129-1134
Leaching of Nickel from a Hydrodesulphurization Spent Catalyst with Ammonium Sulfate