Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ji-Hyuk Choi has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Graphene oxide dough composites: direct mixing and structural design strategies for high-performance electronics and energy applications

    by Seoyeon Park, Jeonghyun Yoo, Kyeong Ja Kim, Soong Ju Oh, Byung-Su Kim, Ji-Hyuk Choi

    Achieving multifunctionality in nanocomposites requires both precise and straightforward strategies for compositional integration and structural design. However, the scalable and tunable incorporation of diverse nanomaterials, while enabling structural versatility, remains a significant challenge. In this study, we present a deformable, binder-free graphene oxide dough (GOD) platform that enables the uniform incorporation of various nanomaterials through straightforward mixing strategies. The viscoelastic GOD matrix facilitates both direct powder mixing (dough-to-powder) and composite-to-composite (dough-to-dough) integration, allowing for precise structural tuning from binary to quaternary composites. The resulting 3D frameworks exhibit dense architectures with interconnected conductive pathways and stable interfaces. Supercapacitor electrodes incorporating RuO2 nanoparticles and carbon nanotubes (CNTs) within the GOD matrix deliver outstanding volumetric capacitance (285 F cm−3 at 0.5 A g−1) and excellent high-rate performance (206 F cm−3 at 20 A g−1). Moreover, Fe2O3 nanoparticles and CNT-containing GOD composites achieve exceptional electromagnetic interference shielding effectiveness (81.3 dB), demonstrating mechanical robustness and functional integrity. This scalable and versatile composite platform offers fine control over composition and structure, establishing a promising direction for practical high-performance energy storage and electronic systems.


  • A Novel Process for Manufacturing Vanadium Dioxide(VO2) as a resource of Vanadium Electrolyte from Vanadium Pentoxide(V2O5)

    by Byung-Su Kim, Tae-Gong Ryu, Jihyuk Choi, Tae Jun Park, Hankwon Chang, JeongHyun Yoo, Chang-Youl Suh, Sung-Wook Cho, Kimin Roh

    A vanadium electrolyte for energy storage is generally prepared by dissolving vanadium pentoxide (V2O5) in sulfuric acid using oxalic acid ((COOH)2) as a reducing agent. However, there is a disadvantage that the dissolution rate in the sulfuric acid solution of V2O5 is very slow. In this study, a new process for producing vanadium dioxide (VO2), which has the faster dissolution rate than V2O5 in sulfuric acid solution, was developed. Vanadium dioxide (VO2) could be used in the production of a vanadium electrolyte for energy storage. The process developed in the study has the advantages of being economical and simple as compared to the existing process for producing VO2 from V2O5 using hydrogen or carbon monoxide as a reducing agent.


  • Open Access

    Development of Low-Temperature Doping Process in Cdse-Nanocrystal Thin Films for Flexible Electronic and Optoelectronic Devices

    by Yong Min Lee, Byung Ku Jung, Junhyuk Ahn, Taesung Park, Chanho Shin, Tse Nga Ng, In Soo Kim, Ji-Hyuk Choi, Soong Ju Oh

    We introduce an effective surface-doping strategy for CdSe nanocrystals (NCs) by examining the size-dependency of the doping behavior. A CdSe NC thin-film transistor (TFT) is fabricated via a doping process with InCl3 treatment followed by an annealing process. Spectroscopic and electronic device characterization reveal that smaller NCs are more effectively doped than larger NCs at all annealing temperatures. This is attributed to the larger specific surface area, where the dopant can be more readily coordinated. The degenerate behavior of a 3.3-nm CdSe-NC TFT appears at a lower temperature than that of larger NC TFTs. We achieve a high electron mobility and on-to-off current ratio of 1.79 cm2/Vs and 5.2 × 105, respectively, in a low-temperature annealing process (150 °C) with 3.3-nm CdSe NCs. This facilitates the fabrication of a flexible CdSe-NC TFT, which is demonstrated on a polyethylene terephthalate substrate with an Al2O3 dielectric layer using atomic layer deposition. The flexible 3.3-nm CdSe-NC TFT is successfully fabricated even at 150 °C, with a high on-to-off current ratio and low hysteresis at a low operation voltage, which is impossible for larger CdSe-NC TFTs.

  • Balancing the anode and cathode using a reduced graphene binder for boosting both energy and power density of hybrid supercapacitors

    by Ji-Hyuk Choi, Byung-Su Kim

    A reduced graphene oxide binder enhances the faradaic reaction kinetics of a Li 4 Ti 5 O 12 (anode) and the specific capacity of a porous activated carbon (cathode), resulting in properly balanced Li + -ion hybrid supercapacitors.


  • Open Access

    Investigating the Aluminothermic Process for Producing Ferrotitanium Alloy from Ilmenite Concentrate

    by Ji-Hyuk Choi, Hankwon Chang, Taegong Ryu, Chul-Woo Nam, Byung-Su Kim

    The aluminothermic process is used for producing ferrotitanium alloy (FeTi) from an ilmenite concentrate. In this study, based on thermodynamic calculations and experiments, we investigated the effects of adding varying amounts of exothermal agent (NaClO3), slag-forming agent (CaO), and reducing agent (Al) on the recovery ratio of Ti in the aluminothermic process. The thermodynamic calculations suggested that the exothermal agent plays a crucial role in producing the FeTi alloy from the ilmenite concentrate and the maximum Ti grade in the FeTi alloy was approximately 30 wt %. Experimentally, it was verified that the FeTi alloy obtained under the optimum mixing conditions contained 30.2–30.8 wt % Ti, 1.1–1.3 wt % Si, 9.5–11.2 wt % Al, and 56.9–58.0 wt % Fe, along with trace impurities and small amounts of gases such as oxygen (0.35–0.66 wt %) and nitrogen (0.01–0.02 wt %). At the optimum mixing conditions, the recovery ratio of Ti into the obtained FeTi alloy phase was 60.6–68.9%. These results matched closely with the thermodynamic calculations. Therefore, the thermodynamic calculations performed herein are expected to significantly contribute toward the development of new processes and improvement in conventional processes for producing various ferroalloys including the FeTi alloy through the aluminothermic process.


  • Open Access

    Synergetic effect of graphene sheet and three‐dimensional crumpled graphene on the performance of dye‐sensitized solar cells

    by Ki‐Min Roh, Sun Kyung Kim, Ji‐Hyuk Choi, Eun‐Hee Jo, Hankwon Chang, Hee Dong Jang

    Herein, an improved structure of the dye‐sensitized solar cell (DSSC) is demonstrated which is composed of surface modified fluorine‐doped tin oxide (FTO) glass with graphene (GR) sheets and TiO2 films incorporated with three‐dimensional crumped graphene (3‐D CGR)/GR sheets. The morphologies of the as‐prepared GR sheets on FTO glasses and 3‐D CGR/GR sheets/TiO2 films were observed by field‐emission scanning electron microscopy. Light harvesting and charge recombination kinetics were investigated with a solar simulator and electrochemical impedance spectroscopy analysis. In addition to the reduced charge resistance by the GR modified FTO, the enhanced dye loading capability of the 3‐D CGR, and the rapid charge transport by the 2‐D GR sheets, the power conversion efficiency was 7.2%, which was an increase of 56% compared to a “conventional” structured DSSC. © 2015 American Institute of Chemical Engineers AIChE J, 62: 574–579, 2016


  • Open Access

    A method for predicting the factor of safety of an infinite slope based on the depth ratio of the wetting front induced by rainfall infiltration

    by B.-G. Chae, J.-H. Lee, H.-J. Park, J. Choi

    Most landslides in Korea are classified as shallow landslides with an average depth of less than 2 m. These shallow landslides are associated with the advance of a wetting front in the unsaturated soil due to rainfall infiltration, which results in an increase in water content and a reduction in the matric suction in the soil. Therefore, this study presents a modified equation of infinite slope stability analysis based on the concept of the saturation depth ratio to analyze the slope stability change associated with the rainfall on a slope. A rainfall infiltration test in unsaturated soil was performed using a column to develop an understanding of the effect of the saturation depth ratio following rainfall infiltration. The results indicated that the rainfall infiltration velocity due to the increase in rainfall in the soil layer was faster when the rainfall intensity increased. In addition, the rainfall infiltration velocity tends to decrease with increases in the unit weight of soil. The proposed model was applied to assess its feasibility and to develop a regional landslide susceptibility map using a geographic information system (GIS). For that purpose, spatial databases for input parameters were constructed and landslide locations were obtained. In order to validate the proposed approach, the results of the proposed approach were compared with the landslide inventory using a ROC (receiver operating characteristics) graph. In addition, the results of the proposed approach were compared with the previous approach used: a steady-state hydrological model. Consequently, the approach proposed in this study displayed satisfactory performance in classifying landslide susceptibility and showed better performance than the steady-state approach.


  • Open Access

    A method for predicting the factor of safety of an infinite slope based on the depth ratio of the wetting front

    by B.-G. Chae, J.-H. Lee, H.-J. Park, J. Choi

    Most landslides in Korea are classified as shallow landslides with an average depth of less than 2 m. These shallow landslides are associated with the advance of a wetting front in the unsaturated soil due to rainfall infiltration, which results in an increase in water content and a reduction in the matric suction in the soil. Therefore, this study presents a modified equation of infinite slope stability analysis based on the concept of the saturation depth ratio to analyze the slope stability change associated with the rainfall on a slope. A rainfall infiltration test in unsaturated soil was performed using a column to develop an understanding of the effect of the saturation depth ratio following rainfall infiltration. The results indicated that the rainfall infiltration velocity due to the increase in rainfall in the soil layer was faster when the rainfall intensity increased. In addition, the rainfall infiltration velocity tends to decrease with increases in the unit weight of soil. The proposed model was applied to assess its feasibility and to develop a regional landslide susceptibility map using a Geographic Information System (GIS). For that purpose, the spatial databases for input parameters were constructed and landslide locations were obtained. In order to validate the proposed approach, the results of the proposed approach were compared with the landslide inventory using ROC (Receiver Operating Characteristics) graph. In addition, the results of the proposed approach were compared with the previous approach used steady state hydrological model. Consequently, the approach proposed in this study displayed satisfactory performance in classifying landslide susceptibility and showed better performance than the steady state approach.