JKJam Hans Kuipers

Jam Hans Kuipers

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jam Hans Kuipers has a total of 102 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dynamical Similarity of Internal and External Flow Characteristics in Pressure Swirl Atomization

    by Vivekanand Swami, Martin Van Sint Annaland, J.A.M. Kuipers

    The possibility of achieving dynamical similarity in pressure swirl atomization, comprising internal liquid flow, air-core formation, external liquid sheet breakup, and subsequent complex dispersed two-phase flow, is experimentally investigated. For this purpose, two geometrically similar, scaled-up, and optically accessible simplex-type atomizers are employed in this study. Water is used as the working fluid. The global internal flow and external spray characteristics are captured using high-speed shadowgraphy, while microscopic characteristics, such as droplet size and velocity, are measured using Phase Doppler Anemometry. The dynamical similarity of key internal and external flow characteristics-including annular liquid sheet thickness, nozzle-exit flow conditions, liquid sheet flapping motion, breakup characteristics, spatial distributions of mean droplet size and dispersed liquid and induced air velocity-is extensively explored. By applying appropriate geometrical and dynamical scaling to both the global and microscopic characteristics, it is shown that, under dynamically similar inlet conditions, the similarity of the flow field can be extended from the internal swirling flow to the corresponding external flow field.

  • Open Access

    Introducing a novel numerical model for describing the electrical potential in electrolyte solutions

    by D.E.A. van Den Eertwegh, A. Pari, E.A.J.F. Peters, J.A.M. Kuipers, M.W. Baltussen


  • Open Access

    A Review of Heat Transfer and Numerical Modeling for Scrap Melting in Steelmaking Converters

    by Mohammed B. A. Hassan, Florian Charruault, Bapin Rout, Frank N. H. Schrama, Johannes A. M. Kuipers, Yongxiang Yang

    Steel is an important product in many engineering sectors; however, steelmaking remains one of the largest CO2 emitters. Therefore, new governmental policies drive the steelmaking industry toward a cleaner and more sustainable operation such as the gas-based direct reduction–electric arc furnace process. To become carbon neutral, utilizing more scrap is one of the feasible solutions to achieve this goal. Addressing knowledge gaps regarding scrap heterogeneity (size, shape, and composition) is essential to evaluate the effects of increased scrap ratios in basic oxygen furnace (BOF) operations. This review systematically examines heat and mass transfer correlations relevant to scrap melting in BOF steelmaking, with a focus on low Prandtl number fluids (thick thermal boundary layer) and dense particulate systems. Notably, a majority of these correlations are designed for fluids with high Prandtl numbers. Even for the ones tailored for low Prandtl, they lack the introduction of the porosity effect which alters the melting behavior in such high temperature systems. The review is divided into two parts. First, it surveys heat transfer correlations for single elements (rods, spheres, and prisms) under natural and forced convection, emphasizing their role in predicting melting rates and estimating maximum shell size. Second, it introduces three numerical modeling approaches, highlighting that the computational fluid dynamics–discrete element method (CFD–DEM) offers flexibility in modeling diverse scrap geometries and contact interactions while being computationally less demanding than particle-resolved direct numerical simulation (PR-DNS). Nevertheless, the review identifies a critical gap: no current CFD–DEM framework simultaneously captures shell formation (particle growth) and non-isotropic scrap melting (particle shrinkage), underscoring the need for improved multiphase models to enhance BOF operation.


  • Open Access

    Critical Review on Heat Transfer Correlations and Numerical Modeling for Scrap Melting in Converter Steelmaking Process

    by M.B.A. Hassan, F. Charruault, B. Rout, F.N.H. Schrama, J.A.M. Kuipers, Y. Yang

    Steel is an important product in many engineering sectors, however, the steelmaking industry is one of the largest CO2 emitters. Because of this, new governmental policies push the steelmaking industry toward a cleaner and more sustainable operation. Becoming carbon neutral, utilizing more scrap is one of the feasible solutions to achieve this goal. However, because of the heterogeneity of the scrap in size, shape, and composition, knowledge gaps need to be dealt with to assess the influence of increasing scrap ratio on the Basic Oxygen Furnace (BOF) steelmaking operation. In the context of steel production, understanding heat transfer and the melting behavior of the scrap in the BOF is crucial for two reasons. First, better heat transfer contributes to efficient energy utilization, reduces scrap melting time which potentially leads to more scrap content, prevents non-homogeneous temperature distribution, and improves the BOF operation and lifetime. Second, understanding the melting behavior of the scrap helps designing a better scrap charging process which will lead to a homogenized melt (if good mixing was not applied). The present study is divided into two parts. First, the difference in melting behavior with emphasis on the melting of a single metal element (e.g., Rod, Sphere, Prism) under the influence of natural and forced convection conditions and their corresponding correlations is highlighted. Also, the influence of solid fraction on the melting and the heat transfer process is emphasized. Secondly, a comparison between the utilized numerical modeling approaches is made. It shows that CFD-DEM (Computational Fluid Dynamics-Discrete Element Method) approach offer attractive features compared to traditional Computational Fluid Dynamics (CFD), especially modeling different scrap shapes and types and using of different contact models (e.g., linear - spring dashpot, Hertz-Mindlin). Furthermore, it is computationally cheaper compared to the Particle Resolved Direct Numerical Simulation (PR-DNS). However, to accurately model the scrap melting (and dissolution) a reliable heat (and mass) correlation model is needed to predict the melting (and dissolution) phenomena correctly. Even though DEM has the capability to model the swelling behavior (particle growth or shell formation), the current review shows that there is no model in CFD-DEM available in literature to capture both shell formation (growth) and melting of the scrap.


  • Open Access

    Coupling of multicomponent transport models in particle-resolved fluid-solid simulations

    by S. Tadayon Mousavi, C.M.Y. Claassen, M.W. Baltussen, E.A.J.F. Peters, J.A.M. Kuipers


  • Open Access

    Analysis of Particle-Resolved CFD Results for Dispersion in Packed Beds

    by P. Lovreglio, K. A. Buist, J. A. M. Kuipers, E. A. J. F. Peters

    Dispersion is the spreading of a solute while it is moved by a flowing medium. The study of dispersion in catalytic chemical reactors is fundamental to their design, since dispersion influences the reactant and product transport within the bed. In this paper, longitudinal and transverse dispersion of an inert tracer in slender packed beds of spheres and spherocylinders is studied using Computational Fluid Dynamics simulations. The focus is on the analysis of dispersion from full field data. The purpose is to develop a methodology that can later also be used to characterize dispersion from full field experimental data such as MRI measurements. Results obtained by means of particle-resolved CFD simulations are discussed. Spatial distributions and residence times are analyzed and the results are interpreted by comparison to results obtained from 1D and 2D convection-diffusion equations.


  • Open Access

    Complete liquid-solid momentum coupling for unresolved CFD-DEM simulations

    by Tim M.J. Nijssen, Hans A.M. Kuipers, Jan van der Stel, Allert T. Adema, Kay A. Buist


  • Open Access

    Hydrodynamic and Heat Transfer Study of a Fluidized Bed by Discrete Particle Simulations

    by Lijing Mu, Kay A. Buist, J. A. M. Kuipers, Niels G. Deen

    A numerical simulation study was carried out to study the combined thermal behavior and hydrodynamics of a pseudo-2D fluidized bed using a computational fluid dynamics–discrete element method (CFD-DEM). To mimic the effect of heterogeneous exothermic reactions, a constant heat source was implemented in the particle energy equation. The effects of superficial gas velocity, bed height and heat source distribution were analyzed with the aid of averaged volume fraction and temperature distributions and velocity profiles. It was found that both the gas superficial velocity and the bed aspect ratio have a profound influence on fluidization behavior and temperature distributions.


  • Droplet spreading and capillary imbibition in a porous medium: A coupled IB-VOF method based numerical study

    by Saurish Das, H. V. Patel, E. Milacic, N. G. Deen, J. A. M. Kuipers

    We investigate the dynamics of a liquid droplet in contact with a surface of a porous structure by means of the pore-scale level, fully resolved numerical simulations. The geometrical details of the solid porous matrix are resolved by a sharp interface immersed boundary method on a Cartesian computational grid, whereas the motion of the gas-liquid interface is tracked by a mass conservative volume of fluid method. The numerical simulations are performed considering a model porous structure that is approximated by a 3D cubical scaffold with cylindrical struts. The effect of the porosity and the equilibrium contact angle (between the gas-liquid interface and the solid struts) on the spreading behavior, liquid imbibition, and apparent contact angle (between the gas-liquid interface and the porous base) are studied. We also perform several simulations for droplet spreading on a flat surface as a reference case. Gas-liquid systems of the Laplace number, La = 45 and La = 144 × 103 are considered neglecting the effect of gravity. We report the time exponent (n) and pre-factor (C) of the power law describing the evolution of the spreading diameter (S = Ctn) for different equilibrium contact angles and porosity. Our simulations reveal that the apparent or macroscopic contact angle varies linearly with the equilibrium contact angle and increases with porosity. Not necessarily for all the wetting porous structures, a continuous capillary drainage occurs, and we find that the rate of the capillary drainage very much depends on the fluid inertia. At La = 144 × 103, numerically we capture the capillary wave induced pinch-off and daughter droplet ejection. We observe that on the porous structure the pinch-off is weak compared to that on a flat plate.


  • Open Access

    Fluidization of spherocylindrical particles

    by Vinay V. Mahajan, Tim M.J. Nijssen, Barry W. Fitzgerald, Jeroen Hofman, Hans Kuipers, Johan T. Padding

    EPJ Web of Conferences, open-access proceedings in physics and astronomy