MAMohamed Ashour

Mohamed Ashour

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mohamed Ashour has a total of 9 co-authors. Here are the top co-authors by number of shared publications:

  • Gary Norris

    Associate Professor, Dept. of Civil and Environmental Engineering, Univ. of Alabama, Huntsville, AL 35806.

    4 shared publications
  • Hamed Ardalan

    Ph.D. Candidate, Dept. of Civil and Environmental Engineering, University of Alabama in Huntsville, Huntsville, AL 35899, USA

    2 shared publications
  • M.Asce

    2 shared publications
  • Miguel A. Pando

    Gannett Fleming, Inc., 10751 Deerwood Park Boulevard, Jacksonville, FL 32256

    1 shared publication
  • Mohamed Ashour, M.ASCE1; Gary Norris, M.ASCE2; and Patrick Pilling, M.ASCE31Research Assistant Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.2Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.3Vice President,

    1 shared publication
  • Mohamed Ashour, M.ASCE1; and Gary Norris, M.ASCE21Research Assistant Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.2Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.

    1 shared publication

Latest Publications

  • Application of the Strain Wedge Model in Soil-pile Interaction Analysis of Pile-stabilized Slopes

    by Hamed Ardalan, Mohamed Ashour

    This paper presents a new method for analyzing pile-stabilized slopes using the Strain Wedge Model (SWM) technique. The developed method allows for the assessment of mobilized and ultimate soil pressure and its distribution along the pile segment above the slip surface based on soil-pile interaction. The proposed technique accounts for the influence of soil and pile properties as well as pile spacing on the interaction between the piles and surrounding soils. The presented method, as well as Finite Element (FE) analysis, is used to derive greater insight into the effect of pile row interaction on the mobilized and ultimate force exerted on the stabilizing piles and the corresponding pile deflection.


  • Employment of the P-Multiplier in Pile-Group Analysis

    by Mohamed Ashour, Hamed Ardalan

    This paper discusses the variation of the P-multiplier (Pm) used with the p-y curve to assess the response of a pile group under lateral loads, which is a crucial topic for the design of bridge pile foundations. Pm is influenced by the site geotechnical conditions (i.e., soil profile, type and properties), pile front and side spacings, and pile-group deflection. The presented study shows the needs to incorporate these factors with the recommended sets of Pm to avoid any compromise or uncertainty when Pm is treated as a single (unique) value based only on pile spacings. The current study addresses these influential elements using the strain wedge (SW) model technique, suggested Pm values, and data collected from full-scale pile-group load tests. The experimental results show that Pm is not unique and must be assessed based on the site geotechnical conditions along with the pile-row front and side spacings. Because the employed Pm values must be a function of these influential factors, additional full- and ...


  • Case Study of the Influence of Flexural Stiffness on the Developed Soil Reactions of Three Laterally Loaded Piles

    by Sixto Fernandez, Miguel Pando, Mohamed Ashour

    This paper presents results and analyses of three full scale lateral load tests. The main objective of this study is to evaluate the influence of the pile bending stiffness in the resulting soil reactions acting around the laterally loaded pile. The case history involved three test piles installed at a well characterized sandy site and tested under similar conditions. The results presented in this paper show that the back-calculated soil reactions, at different depths and lateral deflections levels, yielded considerably different values on each test pile. This observation applied for both computational methods used which is revealing given the similar geotechnical conditions and installation procedures used for the three test piles. It is concluded that the differences in soil reactions are primarily related to the differences in flexural stiffness of the test piles (however, some variations are related to inherent soil variability within the test site). The influence of flexural stiffness in the soil reactions is explained reasonably well with the strain wedge model which allows including this important effect in the analyses. In summary, this paper presents a detailed full-scale case history hoping to shed some light on this potentially important factor of the pile flexural stiffness in the lateral soil reactions of laterally loaded piles.


  • Assessment of the Undrained Response of Sands under Limited and Complete Liquefaction

    by Mohamed Ashour, Gary Norris, Tung Nguyen

    The technique presented deals with the assessment, based on drained test behavior and formulation, of the undrained postcyclic stress-strain behavior of sands under limited or complete (full) liquefaction and its associated strength. At present, there is no particular procedure that allows assessment of such undrained postcyclic behavior that could develop full (pore-water pressure ratio, ru =1 ) or limited ( ru <1 ) liquefaction. The prediction of the undrained postliquefaction (full or limited liquefaction) response presented here is based on basic properties of sand such as its relative density ( D rc ) [or ( N1 ) 60 blowcount], the effective angle of internal friction (φ) , the roundness of the sand grains (ρ) , and the drained axial strain at 50% stress level ( ε50 ) . The technique presented accounts for the excess pore-water pressure induced by cyclic loading ( Δ uc ) and the postcyclic excess pore-water pressure generated under undrained monotonic loading ( Δ ud ) .


  • Closure to “Strain Wedge Model Capability of Analyzing Behavior of Laterally Loaded Isolated Piles, Drilled Shafts, and Pile Groups” by Mohamed Ashour, Gary Norris, and Patrick Pilling

    by Mohamed Ashour, Gary Norris, Mohamed Ashour, M.ASCE1; and Gary Norris, M.ASCE21Research Assistant Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.2Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557., M.Asce

  • Lateral Loaded Pile Response in Liquefiable Soil

    by Mohamed Ashour, Gary Norris

    This paper provides a new analysis procedure for assessing the lateral response of an isolated pile in saturated sands as liquefaction develops in response to dynamic loading such as that generated during earthquake shaking. This new procedure predicts the degradation in pile response and soil resistance due to the free-field excess porewater pressure generated by the earthquake, along with the near-field excess porewater pressure generated by lateral loading from the superstructure. The new procedure involves the integration of the developing (free- and near-field) porewater pressure in the strain wedge (SW) model analysis. The current SW model, developed to evaluate drained response (a nonlinear three-dimensional model) of a flexible pile in soil, has been extended in this paper to incorporate the undrained response of a laterally loaded pile in liquefied sand. This new procedure has the capability of predicting the response of a laterally loaded isolated pile and the associated modulus of subgrade reaction (i.e., the p-y curve) in a mobilized fashion as a result of developing liquefaction in the sand. Current design procedures assume slight or no resistance for the lateral movement of the pile in the liquefied soil which is a conservative practice. Alternatively, if liquefaction is assessed not to occur, some practitioners take no account of the increased free-field porewater pressure, and none consider the additional near-field porewater pressure due to inertial interaction loading from the superstructure; a practice that is unsafe in loose sands.

  • Strain Wedge Model Capability of Analyzing Behavior of Laterally Loaded Isolated Piles, Drilled Shafts, and Pile Groups

    by Mohamed Ashour, Gary Norris, Patrick Pilling, Mohamed Ashour, M.ASCE1; Gary Norris, M.ASCE2; and Patrick Pilling, M.ASCE31Research Assistant Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.2Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.3Vice President, , M.Asce

    This paper demonstrates the application of the strain wedge (SW) model to assess the response of laterally loaded isolated long piles, drilled shafts, and pile groups in layered soil (sand and/or clay) and rock deposits. The basic goal of this paper is to illustrate the capabilities of the SW model versus other procedures and approaches. The SW model has been validated and verified through several comparison studies with model- and full-scale lateral load tests. Several factors and features related to the problem of a laterally loaded isolated pile and pile group are covered by the SW model. For example, the nonlinear behavior of both soil and pile material, the soil-pile interaction (i.e., the assessment of the p-y curves rather than the adoption of empirical ones), the potential of soil to liquefy, the interference among neighboring piles in a pile group, and the pile cap contribution are considered in SW model analysis. The SW model analyzes the response of laterally loaded piles based on pile properties (pile stiffness, cross-sectional shape, pile-head conditions, etc.) as well as soil properties. The SW model has the capability of assessing the response of a laterally loaded pile group in layered soil based on more realistic assumptions of pile interference as compared to techniques and procedures currently employed or proposed.