Strain Wedge Model Capability of Analyzing Behavior of Laterally Loaded Isolated Piles, Drilled Shafts, and Pile Groups
Authors:
- Mohamed AshourMAMohamed Ashour
- Mohamed Ashour, M.ASCE1; Gary Norris, M.ASCE2; and Patrick Pilling, M.ASCE31Research Assistant Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.2Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.3Vice President,MMohamed Ashour, M.ASCE1; Gary Norris, M.ASCE2; and Patrick Pilling, M.ASCE31Research Assistant Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.2Professor, Dept. of Civil Engineering, Univ. of Nevada, Reno, NV 89557.3Vice President,
- M.AsceM.M.Asce
- 1 July 2002
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 7 (4) , 245-254
Abstract
This paper demonstrates the application of the strain wedge (SW) model to assess the response of laterally loaded isolated long piles, drilled shafts, and pile groups in layered soil (sand and/or clay) and rock deposits. The basic goal of this paper is to illustrate the capabilities of the SW model versus other procedures and approaches. The SW model has been validated and verified through several comparison studies with model- and full-scale lateral load tests. Several factors and features related to the problem of a laterally loaded isolated pile and pile group are covered by the SW model. For example, the nonlinear behavior of both soil and pile material, the soil-pile interaction (i.e., the assessment of the curves rather than the adoption of empirical ones), the potential of soil to liquefy, the interference among neighboring piles in a pile group, and the pile cap contribution are considered in SW model analysis. The SW model analyzes the response of laterally loaded piles based on pile properties (pile stiffness, cross-sectional shape, pile-head conditions, etc.) as well as soil properties. The SW model has the capability of assessing the response of a laterally loaded pile group in layered soil based on more realistic assumptions of pile interference as compared to techniques and procedures currently employed or proposed.
Keywords
This publication has 24 references indexed in Scilit:
- Modeling Lateral Soil-Pile Response Based on Soil-Pile InteractionJournal of Geotechnical and Geoenvironmental Engineering, 2000
- Liquefaction and Undrained Response Evaluation of Sands from Drained FormulationJournal of Geotechnical and Geoenvironmental Engineering, 1999
- Centrifuge Testing of Large Laterally Loaded Pile Groups in SandsJournal of Geotechnical and Geoenvironmental Engineering, 1998
- Lateral Load Behavior of Full-Scale Pile Group in ClayJournal of Geotechnical and Geoenvironmental Engineering, 1998
- Lateral Loading of a Pile in Layered Soil Using the Strain Wedge ModelJournal of Geotechnical and Geoenvironmental Engineering, 1998
- Liquefaction and Residual Strength of Sands from Drained Triaxial TestsJournal of Geotechnical and Geoenvironmental Engineering, 1997
- Soil-Foundation-Structure Behavior at the Oakland Outer Harbor WharfTransportation Research Record: Journal of the Transportation Research Board, 1996
- Design of Laterally Loaded Driven Piles Using the Flat DilatometerGeotechnical Testing Journal, 1989
- Laterally Loaded Piles and the Pressuremeter: Comparison of Existing Methods1984
- Evalution of Conefficients of Subgrade ReactionGéotechnique, 1955