Ivan Catton
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ivan Catton has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Feng Zhou
University of California, Los Angeles, Los Angeles, CA
3 shared publications - Akshay Bharadwaj Krishna2 shared publications
Novak Zuber
703 New Mark Esplanade, Rockville, MD 20850
2 shared publications- Portonovo Ayyaswamy
Department of Mechanical and Aerospace Engineering, Samueli School of Engineering, University of California, Los Angeles, CA 90095
2 shared publications - Qi Yao
Mem. ASME Mechanical and Aerospace Engineering, University of California, 420 Westwood Plaza, Eng. IV 43-132, Los Angeles, CA 90095-1957
2 shared publications - Sean W. Reilly
Mechanical and Aerospace Engineering Department, University of California, Los Angeles, Los Angeles, CA 91101
2 shared publications
Latest Publications
- Open Access
- 16 July 2021
- Published by ASME International
Design Optimization of a Shell and Tube Heat Exchanger Using Volume Averaging Theory
Minimization of total cost, including technoeconomic weight and lifetime considerations, while maximizing heat transfer rates of heat exchangers is a key objective in many thermal applications. Among the different heat exchanger types, shell and tube heat exchangers (STHEs) are particularly popular due to their versatility in operation over wide temperature and pressure ranges of
- 16 July 2021
- Published by ASME International
Open AccessDesign Optimization of a Shell and Tube Heat Exchanger Using Volume Averaging Theory
Minimization of total cost, including technoeconomic weight and lifetime considerations, while maximizing heat transfer rates of heat exchangers is a key objective in many thermal applications. Among the different heat exchanger types, shell and tube heat exchangers (STHEs) are particularly popular due to their versatility in operation over wide temperature and pressure ranges of
- Open Access
- 16 July 2021
- Published by ASME International
Design Optimization of Compact Superalloy Heat Exchangers for Extreme Temperature and Pressure Conditions
Heat exchangers are critical components of a variety of energy systems for providing efficient thermal energy management and significant heat recovery. Manufactured with an advanced nickel-based alloy, ‘superalloy’ heat exchangers can handle working fluids (e.g., supercritical CO2) at extremely high temperatures and pressures. Operated at these conditions, thermal systems can
- 16 July 2021
- Published by ASME International
Open AccessDesign Optimization of Compact Superalloy Heat Exchangers for Extreme Temperature and Pressure Conditions
Heat exchangers are critical components of a variety of energy systems for providing efficient thermal energy management and significant heat recovery. Manufactured with an advanced nickel-based alloy, ‘superalloy’ heat exchangers can handle working fluids (e.g., supercritical CO2) at extremely high temperatures and pressures. Operated at these conditions, thermal systems can
- 19 December 2017
- Published by Wiley in Journal of Heat Transfer
- Vol. 140 (4) , 042901
Investigation of the Use of an Inorganic Aqueous Solution in Copper-Made Phase-Change Heat Transfer Devices
A novel inorganic aqueous solution (IAS) is shown to have a better heat transfer performance than water when used as the working fluid in copper-made phase-change heat transfer devices. First, the physical properties of IAS are measured and compared to those of water. Another, a chemical analysis is performed, and the chemical reactions involved between IAS and the copper surface are listed and categorized by their contributions to the heat transfer performance. In addition, a capillary rise test is performed to show how each chemical contributes to the improvement of the surface wettability. Last, using IAS in copper-made phase-change heat transfer devices is discussed, and the main focus is how IAS improves the heat transfer performance by a smaller thermal resistance and a larger critical heat flux. The conclusion is validated by thermo-siphon tests at different inclination angles.
- 19 December 2017
- Published by Wiley in Journal of Heat Transfer
- Vol. 140 (4) , 042901
Investigation of the Use of an Inorganic Aqueous Solution in Copper-Made Phase-Change Heat Transfer Devices
A novel inorganic aqueous solution (IAS) is shown to have a better heat transfer performance than water when used as the working fluid in copper-made phase-change heat transfer devices. First, the physical properties of IAS are measured and compared to those of water. Another, a chemical analysis is performed, and the chemical reactions involved between IAS and the copper surface are listed and categorized by their contributions to the heat transfer performance. In addition, a capillary rise test is performed to show how each chemical contributes to the improvement of the surface wettability. Last, using IAS in copper-made phase-change heat transfer devices is discussed, and the main focus is how IAS improves the heat transfer performance by a smaller thermal resistance and a larger critical heat flux. The conclusion is validated by thermo-siphon tests at different inclination angles.
- Open Access
- 25 July 2017
- Published by Wiley in Journal of Heat Transfer
- Vol. 139 (12)
Investigation of the Use of an Inorganic Aqueous Solution in Aluminum-Made Phase-Change Heat Transfer Devices
An inorganic aqueous solution, known as IAS, has shown its compatibility with aluminum phase-change heat transfer devices. When using IAS in aluminum devices, aluminum prefers to react with the two oxidizers, permanganate and chromate, rather than water to generate a thin and compact layer of aluminum oxide, which protects the aluminum surface and prevents further reactions. In addition, an electrochemical theory of aluminum passivation is introduced, and the existence of an electrochemical cycle is demonstrated by an aluminum thermosiphon test. The electrochemistry cycle, built up by liquid back flow and tube wall, allows the oxidizers to passivate the aluminum surface inside the device without being directly in contact with it. However, failure was detected while using IAS in thermosiphons with air natural convection cooling. The importance of a continuous liquid back flow to aluminum passivation in phase-change heat transfer devices is pointed out, and a vertical thermosiphon test with natural convection cooling is used to demonstrate that a discontinuous liquid back flow is the main reason of the failures.
- 25 July 2017
- Published by Wiley in Journal of Heat Transfer
- Vol. 139 (12)
Open AccessInvestigation of the Use of an Inorganic Aqueous Solution in Aluminum-Made Phase-Change Heat Transfer Devices
An inorganic aqueous solution, known as IAS, has shown its compatibility with aluminum phase-change heat transfer devices. When using IAS in aluminum devices, aluminum prefers to react with the two oxidizers, permanganate and chromate, rather than water to generate a thin and compact layer of aluminum oxide, which protects the aluminum surface and prevents further reactions. In addition, an electrochemical theory of aluminum passivation is introduced, and the existence of an electrochemical cycle is demonstrated by an aluminum thermosiphon test. The electrochemistry cycle, built up by liquid back flow and tube wall, allows the oxidizers to passivate the aluminum surface inside the device without being directly in contact with it. However, failure was detected while using IAS in thermosiphons with air natural convection cooling. The importance of a continuous liquid back flow to aluminum passivation in phase-change heat transfer devices is pointed out, and a vertical thermosiphon test with natural convection cooling is used to demonstrate that a discontinuous liquid back flow is the main reason of the failures.
- 1 May 2015
- Published by Wiley in Journal of Heat Transfer
- Vol. 137 (5) , 052901
Passivation and Performance of Inorganic Aqueous Solutions in a Grooved Aluminum Flat Heat Pipe
Aluminum heat pipes have traditionally been incompatible with water and water-based fluids because they quickly react to generate noncondensable hydrogen gas (NCG). Two different inorganic aqueous solutions (IAS) are tested in a flat heat pipe (FHP). Grooved aluminum plates were used as the heat pipe wick and the tests were run with the heating section raised above the condenser. Compatibility between the working fluid and the aluminum heat pipe was established by running the device to dryout and observing thermal resistance results along the way. De-ionized (DI) water was also tested, as a baseline for comparison, to establish that it did indeed fail as expected. Operating performance of each mixture was obtained from zero heat input until dryout was reached for two angles of inclination. The data suggest that both IAS mixtures are compatible with aluminum heat pipes and exhibit performance similar to that of a copper and water heat pipe. It is demonstrated that IAS and aluminum heat pipes show potential for replacing existing copper and water devices for some applications and provide alternative options for heat pipe designers who value both the thermophysical property advantages of water and reduced weight of aluminum devices.
- 1 May 2015
- Published by Wiley in Journal of Heat Transfer
- Vol. 137 (5) , 052901
Passivation and Performance of Inorganic Aqueous Solutions in a Grooved Aluminum Flat Heat Pipe
Aluminum heat pipes have traditionally been incompatible with water and water-based fluids because they quickly react to generate noncondensable hydrogen gas (NCG). Two different inorganic aqueous solutions (IAS) are tested in a flat heat pipe (FHP). Grooved aluminum plates were used as the heat pipe wick and the tests were run with the heating section raised above the condenser. Compatibility between the working fluid and the aluminum heat pipe was established by running the device to dryout and observing thermal resistance results along the way. De-ionized (DI) water was also tested, as a baseline for comparison, to establish that it did indeed fail as expected. Operating performance of each mixture was obtained from zero heat input until dryout was reached for two angles of inclination. The data suggest that both IAS mixtures are compatible with aluminum heat pipes and exhibit performance similar to that of a copper and water heat pipe. It is demonstrated that IAS and aluminum heat pipes show potential for replacing existing copper and water devices for some applications and provide alternative options for heat pipe designers who value both the thermophysical property advantages of water and reduced weight of aluminum devices.
- 11 March 2014
- Published by Wiley in Journal of Heat Transfer
- Vol. 136 (6) , 061501
Utilization of Pore-Size Distributions to Predict Thermophysical Properties and Performance of Biporous Wick Evaporators
A sintered copper porous medium is an extremely effective structure used to enhance the evaporative heat transfer properties of a heat pipe. It provides both capillary pressure to passively draw liquid in and increased surface area to more effectively heat the liquid. A biporous wick is particularly effective for this application as there are two distinct size distributions of pores; small pores to provide ample capillary pressure to drive flow through the wick and large pores to provide high permeability for escaping vapor. The modeling described in this work is based on the work of Kovalev who used a pore size distribution in order to determine the most probable liquid saturation at a given position. The model distinguishes phases by choosing a “cutoff” pore size, where larger pores were assumed to be filled with vapor and smaller pores were assumed to be filled with liquid. For a given thickness and thermophysical properties of the liquid, this 1-D model predicts the temperature difference across the wick for a given input power. The modeling proposed in this work yielded results that compare very well with experimental data collected on biporous evaporators by Semenic.
- 11 March 2014
- Published by Wiley in Journal of Heat Transfer
- Vol. 136 (6) , 061501
Utilization of Pore-Size Distributions to Predict Thermophysical Properties and Performance of Biporous Wick Evaporators
A sintered copper porous medium is an extremely effective structure used to enhance the evaporative heat transfer properties of a heat pipe. It provides both capillary pressure to passively draw liquid in and increased surface area to more effectively heat the liquid. A biporous wick is particularly effective for this application as there are two distinct size distributions of pores; small pores to provide ample capillary pressure to drive flow through the wick and large pores to provide high permeability for escaping vapor. The modeling described in this work is based on the work of Kovalev who used a pore size distribution in order to determine the most probable liquid saturation at a given position. The model distinguishes phases by choosing a “cutoff” pore size, where larger pores were assumed to be filled with vapor and smaller pores were assumed to be filled with liquid. For a given thickness and thermophysical properties of the liquid, this 1-D model predicts the temperature difference across the wick for a given input power. The modeling proposed in this work yielded results that compare very well with experimental data collected on biporous evaporators by Semenic.
- 27 June 2013
- Published by Wiley in Journal of Heat Transfer
- Vol. 135 (8) , 081901
A Numerical Investigation of Turbulent Flow and Heat Transfer in Rectangular Channels With Elliptic Scale-Roughened Walls
In the present paper, rectangular channels with six types of elliptic scale-roughened walls for heat transfer enhancement are numerically studied. Heat transfer and fluid flow characteristics for sixteen different scale-roughened models (with the scale height varying in the range from 1 mm to 2.5 mm) are numerically predicted using commercial computational fluid dynamics (CFD) code, Ansys cfx. The turbulent model employed is the k–ω based shear–stress transport (SST) model with automatic wall function treatment. In the performance evaluation, we use a “universal” porous media length scale based on volume averaging theory (VAT) to define the Reynolds number, Nusselt number, and friction factor. It is found that heat transfer performance is most favorable when the elliptic scales are oriented with their long axis perpendicular to the flow direction, while the scales elongated in the flow direction have lower Nusselt numbers and pressure drops compared with the circular scale-roughened channels. Results indicate that the scale-shaped roughness strongly spins the flow in the spanwise direction, which disrupts the near-wall boundary layers continuously and enhances the bulk flow mixing. With the flow marching in a more intense spiral pattern, a 40% improvement of heat transfer enhancement over the circular scale-roughened channels is observed.
- 27 June 2013
- Published by Wiley in Journal of Heat Transfer
- Vol. 135 (8) , 081901
A Numerical Investigation of Turbulent Flow and Heat Transfer in Rectangular Channels With Elliptic Scale-Roughened Walls
In the present paper, rectangular channels with six types of elliptic scale-roughened walls for heat transfer enhancement are numerically studied. Heat transfer and fluid flow characteristics for sixteen different scale-roughened models (with the scale height varying in the range from 1 mm to 2.5 mm) are numerically predicted using commercial computational fluid dynamics (CFD) code, Ansys cfx. The turbulent model employed is the k–ω based shear–stress transport (SST) model with automatic wall function treatment. In the performance evaluation, we use a “universal” porous media length scale based on volume averaging theory (VAT) to define the Reynolds number, Nusselt number, and friction factor. It is found that heat transfer performance is most favorable when the elliptic scales are oriented with their long axis perpendicular to the flow direction, while the scales elongated in the flow direction have lower Nusselt numbers and pressure drops compared with the circular scale-roughened channels. Results indicate that the scale-shaped roughness strongly spins the flow in the spanwise direction, which disrupts the near-wall boundary layers continuously and enhances the bulk flow mixing. With the flow marching in a more intense spiral pattern, a 40% improvement of heat transfer enhancement over the circular scale-roughened channels is observed.
- 14 June 2012
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 48 (10) , 1813-1823
Volume Averaging Theory (VAT) based modeling and closure evaluation for fin-and-tube heat exchangers
- 14 June 2012
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 48 (10) , 1813-1823
Volume Averaging Theory (VAT) based modeling and closure evaluation for fin-and-tube heat exchangers
- 1 June 2011
- Published by ASME International in Journal of Thermal Science and Engineering Applications
- Vol. 3 (2) , 021006
Utilization of Advanced Working Fluids With Biporous Evaporators
A novel fluid for use as a working fluid in a heat pipe has been tested at UCLA. The fluid was discovered originally in use with a device consisting of a metal tube charged with the patented inorganic aqueous solution (IAS), which is evaporated when the tube is evacuated before use. According to the patent, this evaporation leaves a thin film that allows the tube to carry high heat flux loads with low temperature drop across the tube in a solid state mode. However, various experiments with these tubes have produced inconsistent results, and there are some questions as to whether the fluid is completely evaporated. The research on which this work is based is focused on testing whether the charging fluid will operate as the working fluid in a heat pipe, in order to determine the nature of the IAS fluid. A heat pipe apparatus was charged with a biporous wick in order to investigate if the fluid plays a role in heat transfer. There are extensive data for this experiment using water as the working fluid, which will be used to compare the two sets of results. Testing has shown a reduction of the superheat required to drive heat fluxes through a wick compared to water by approximately 40%. Some experiments have shown that the operating (temperature) range of the IAS is much larger than a standard heat pipe. It is theorized that the increase in performance of the IAS is due to an increased thermal conductivity of the wick and increased capillarity. If this fluid is proven to be effective, it would lead to more effective and tunable heat transfer devices.
- 1 June 2011
- Published by ASME International in Journal of Thermal Science and Engineering Applications
- Vol. 3 (2) , 021006
Utilization of Advanced Working Fluids With Biporous Evaporators
A novel fluid for use as a working fluid in a heat pipe has been tested at UCLA. The fluid was discovered originally in use with a device consisting of a metal tube charged with the patented inorganic aqueous solution (IAS), which is evaporated when the tube is evacuated before use. According to the patent, this evaporation leaves a thin film that allows the tube to carry high heat flux loads with low temperature drop across the tube in a solid state mode. However, various experiments with these tubes have produced inconsistent results, and there are some questions as to whether the fluid is completely evaporated. The research on which this work is based is focused on testing whether the charging fluid will operate as the working fluid in a heat pipe, in order to determine the nature of the IAS fluid. A heat pipe apparatus was charged with a biporous wick in order to investigate if the fluid plays a role in heat transfer. There are extensive data for this experiment using water as the working fluid, which will be used to compare the two sets of results. Testing has shown a reduction of the superheat required to drive heat fluxes through a wick compared to water by approximately 40%. Some experiments have shown that the operating (temperature) range of the IAS is much larger than a standard heat pipe. It is theorized that the increase in performance of the IAS is due to an increased thermal conductivity of the wick and increased capillarity. If this fluid is proven to be effective, it would lead to more effective and tunable heat transfer devices.
- Open Access
- 3 November 2010
- Published by Meta Analytics LLC in Frontiers in Heat Pipes
- Vol. 1 (1)
ADVANCES IN BIPOROUS WICK DESIGN AND TESTING FOR THERMAL GROUND PLANES
A premiere free-access and peer-reviewed frontier journal site, serving the needs of the thermal-fluids community. See the latest research or submit an article. Quickly share your research with the global thermal-fluids community, for increased citations and impact at no cost.
- 3 November 2010
- Published by Meta Analytics LLC in Frontiers in Heat Pipes
- Vol. 1 (1)
Open AccessADVANCES IN BIPOROUS WICK DESIGN AND TESTING FOR THERMAL GROUND PLANES
A premiere free-access and peer-reviewed frontier journal site, serving the needs of the thermal-fluids community. See the latest research or submit an article. Quickly share your research with the global thermal-fluids community, for increased citations and impact at no cost.