FZFeng Zhou

Feng Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Feng Zhou has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A total energy-based adaptive mesh refinement technique for the simulation of compressible flow

    by Xian Xu, Yingchun Chen, Zhirong Han, Feng Zhou

    In this paper, an adaptive mesh refinement technique is presented for simulation of compressible flows, which can effectively refine the mesh in the regions with shock waves and vortices. The present approach uses the total energy per unit volume as an indicator to capture the shock waves and vortical structures. In the approach, an h-refinement strategy is adopted. To save the computational effort, the flow variables on the new mesh are obtained from the previous step by interpolation, which ensures that the problem is always solved on the refined mesh. Both inviscid and viscous compressible flows are considered in this work. Their governing equations are, respectively, Euler equations and Navier–Stokes equations associated with the implementation of the Spalart–Allmaras turbulence model. The cell-centered finite volume method and Jameson scheme are chosen to carry out spatial discretization, and the five-stage Runge–Kutta scheme is applied to discretize the temporal derivative. The present approach is applied to simulate three test problems for its validation. Numerical results show that it can effectively capture the shock waves and vortices with improvement in solution accuracy.

  • Design, Fabrication, and Performance Evaluation of a Hybrid Wick Vapor Chamber

    by Feng Zhou, Yanghe Liu, Ercan M. Dede

    The growing electrification of transportation systems is dramatically increasing the waste heat that must be dissipated from high-density power electronics. Transformative embedded heat spreading technologies must be developed in next-generation systems to enable air cooling of power semiconductors with heat fluxes exceeding 500 W/cm2 over large hotspot areas up to 1 cm2. In this study, vapor chamber heat spreaders, or thermal ground planes (TGPs), with customized wick structures are investigated as one possibility. A 10 cm × 10 cm TGP with hybrid wick, which is a blend of a biporous wick with a standard monoporous wick, was designed. The TGP was tested in combination with a straight pin fin heat sink under air jet impingement and a 1 cm2 size heat source. The experimental performance of the hybrid wick TGP was compared under the same air-cooled conditions with an off-the-shelf TGP of the same size from a commercial vendor and a TGP with a biporous wick only. The customized hybrid wick TGP exhibits ∼28% lower thermal resistance compared with a traditional commercial TGP, and the capillary limit heat flux is measured as 450 W/cm2. Technical challenges in extending this capillary limit heat flux value and TGP integration into packaged electronics are described.


  • A Numerical Investigation of Turbulent Flow and Heat Transfer in Rectangular Channels With Elliptic Scale-Roughened Walls

    by Feng Zhou, Ivan Catton

    In the present paper, rectangular channels with six types of elliptic scale-roughened walls for heat transfer enhancement are numerically studied. Heat transfer and fluid flow characteristics for sixteen different scale-roughened models (with the scale height varying in the range from 1 mm to 2.5 mm) are numerically predicted using commercial computational fluid dynamics (CFD) code, Ansys cfx. The turbulent model employed is the k–ω based shear–stress transport (SST) model with automatic wall function treatment. In the performance evaluation, we use a “universal” porous media length scale based on volume averaging theory (VAT) to define the Reynolds number, Nusselt number, and friction factor. It is found that heat transfer performance is most favorable when the elliptic scales are oriented with their long axis perpendicular to the flow direction, while the scales elongated in the flow direction have lower Nusselt numbers and pressure drops compared with the circular scale-roughened channels. Results indicate that the scale-shaped roughness strongly spins the flow in the spanwise direction, which disrupts the near-wall boundary layers continuously and enhances the bulk flow mixing. With the flow marching in a more intense spiral pattern, a 40% improvement of heat transfer enhancement over the circular scale-roughened channels is observed.


  • Hierarchical Modeling and Closure Evaluation for Fin-and-Tube Heat Exchangers Using 3-D Numerical Simulation

    by Feng Zhou, David Geb, George DeMoulin, Ivan Catton

    A plain fin-and-tube heat exchanger was modeled based on Volume Averaging Theory (VAT) and the closure for the model was evaluated using CFD. Modeling a fin-and-tube heat exchanger as porous media based on VAT, specific geometry can be accounted for in such a way that the details of the original structure can be replaced by their averaged counterparts and the VAT based governing equations can be efficiently solved for a wide range of parameters. To complete the VAT based model, proper closure is needed, which is related to a local friction factor and a heat transfer coefficient of a Representative Elementary Volume (REV). The terms in the closure expressions are complex and sometimes relating experimental data to the closure terms is difficult. In this work we use CFD to obtain detailed solutions of flow and heat transfer through an element of a fin-and-tube heat exchanger and use these results to evaluate the closure terms needed for a fast running VAT based code, which can then be used to solve the heat transfer characteristics of a higher level heat exchanger. The objective is to show how heat sinks can be modeled as a porous media based on Volume Averaging Theory and how CFD can be used in place of a detailed, often formidable, experimental effort to obtain closure for a VAT based model.

  • Genetic Algorithm Optimization of a Compact Heat Exchanger Modeled Using Volume Averaging Theory

    by David Geb, Feng Zhou, George DeMoulin, Ivan Catton

    This paper proposes and implements a new methodology for optimizing Compact Heat Exchangers (CHXs) using a Volume Averaging Theory (VAT) model and a Genetic Algorithm (GA) optimizer. This method allows for multiple-parameter optimization of CHXs by design of their basic morphological structures, and is applied to a Finned-Tube Heat Exchanger (FTHX). A consistent model is used to describe transport phenomena in a FTHX based on VAT, which allows for the volume averaged conservation of mass, momentum, and energy equations to be solved point by point, with the morphology of the structure directly incorporated into the field equations. The equations differ from known equations and are developed using a rigorous averaging technique, hierarchical modeling methodology, and fully turbulent models with Reynolds stresses and fluxes in the space of every pore. These averaged equations have additional integral and differential terms that must be dealt with in order for the equation set to be closed, and recent work has provided this closure. The resulting governing equation set is relatively simple and is discretized and solved using the finite difference method. Such a computational algorithm is fast running, but still able to present a detailed picture of the temperature fields in both of the fluid flows as well as in the solid structure of the heat exchanger. A GA is integrated with the VAT-based solver to carry out the FTHX optimization, which is a ten parameter problem, and the FTHX’s effectiveness is selected as the fitness function to be optimized. This method of using the VAT-based solver fully integrated with a GA optimizer results in an all-in-one tool for performing multiple-parameter constrained optimization on FTHXs.


  • Internal Heat Transfer Coefficient Determination in a Packed Bed From the Transient Response Due to Solid Phase Induction Heating

    by David Geb, Feng Zhou, Ivan Catton

    Nonintrusive measurements of the internal heat transfer coefficient in the core of a randomly packed bed of uniform spherical particles are made. Under steady, fully-developed flow the spherical particles are subjected to a step-change in volumetric heat generation rate via induction heating. The fluid temperature response is measured. The internal heat transfer coefficient is determined by comparing the results of a numerical simulation based on volume averaging theory (VAT) with the experimental results. The only information needed is the basic material and geometric properties, the flow rate, and the fluid temperature response data. The computational procedure alleviates the need for solid and fluid phase temperature measurements within the porous medium. The internal heat transfer coefficient is determined in the core of a packed bed, and expressed in terms of the Nusselt number, over a Reynolds number range of 20 to 500. The Nusselt number and Reynolds number are based on the VAT scale hydraulic diameter, dh=4ɛ/S. The results compare favorably to those of other researchers and are seen to be independent of particle diameter. The success of this method, in determining the internal heat transfer coefficient in the core of a randomly packed bed of uniform spheres, suggests that it can be used to determine the internal heat transfer coefficient in other porous media.


  • Determination of the Number of Tube Rows to Obtain Closure for Volume Averaging Theory Based Model of Fin-and-Tube Heat Exchangers

    by Feng Zhou, Nicholas E. Hansen, David J. Geb, Ivan Catton

    Modeling of fin-and-tube heat exchangers based on the volume averaging theory (VAT) requires proper closure of the VAT based governing equations. Closure can be obtained from reasonable lower scale solutions of a computational fluid dynamics (CFD) code, which means the tube row number chosen should be large enough, so that the closure can be evaluated for a representative elementary volume (REV) that is, not affected by the entrance or recirculation at the outlet of the fin gap. To determine the number of tube rows, three-dimensional numerical simulations for plate fin-and-tube heat exchangers were performed, with the Reynolds number varying from 500 to 6000 and the number of tube rows varying from 1 to 9. A clear perspective of the variations of both overall and local fiction factor and the Nusselt number as the tube row number increases are presented. These variation trends are explained from the view point of the field synergy principle (FSP). Our investigation shows that 4 + 1 + 1 tube rows is the minimum number to get reasonable lower scale solutions. A computational domain including 5 + 2 + 2 tube rows is recommended, so that the closure formulas for drag resistance coefficient and heat transfer coefficient could be evaluated for the sixth and seventh elementary volumes to close the VAT based model.