Christian Fiebig
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Christian Fiebig has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Katrin Paschke
Ferdinand-Braun-Institut gGmbH
5 shared publications - David Feise
Ferdinand Braun Inst, Leibniz Inst Hochstfrequenztechn, D-12489 Berlin, Germany
3 shared publications Götz Erbert
Ferdinand-Braun-Institut für Höchstfrequenztechnik,Gustav-Kirchhoff-Str.4 12489 Berlin, USA
3 shared publicationsBernd Eppich
Ferdinand-Braun-Institut für Höchstfrequenztechnik,Gustav-Kirchhoff-Str.4 12489 Berlin, USA
2 shared publicationsG. Erbert
2 shared publicationsGunnar Blume
Ferdinand-Braun-Institut für Höchstfrequenztechnik,Gustav-Kirchhoff-Str.4 12489 Berlin, USA
2 shared publications
Latest Publications
- 29 January 2010
- Published by Optica Publishing Group in Optics Letters
- Vol. 35 (3) , 402-404
High-power distributed Bragg reflector ridge-waveguide diode laser with very small spectral linewidth
We manufactured and investigated distributed Bragg reflector ridge-waveguide diode lasers having sixth-order surface gratings and an emission wavelength around 974 nm. The single-mode output power of the lasers with a total length of 4 mm exceeded 1 W. A very small spectral linewidth of 1.4 MHz (3 dB) consisting of a Lorentzian part of 146 kHz and a Gaussian part of 1308 MHz was measured using a self-delayed heterodyne measurement technique.
- 29 January 2010
- Published by Optica Publishing Group in Optics Letters
- Vol. 35 (3) , 402-404
High-power distributed Bragg reflector ridge-waveguide diode laser with very small spectral linewidth
We manufactured and investigated distributed Bragg reflector ridge-waveguide diode lasers having sixth-order surface gratings and an emission wavelength around 974 nm. The single-mode output power of the lasers with a total length of 4 mm exceeded 1 W. A very small spectral linewidth of 1.4 MHz (3 dB) consisting of a Lorentzian part of 146 kHz and a Gaussian part of 1308 MHz was measured using a self-delayed heterodyne measurement technique.
- 12 January 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 22 (5) , 341-343
High-Brightness 980-nm Tapered Laser— Optimization of the Laser Rear Facet
We present experimental results on a gain-guided tapered diode laser with rear facet coating variation from 98% down to 5% reflectivity. We show that in comparison to the common high reflection coating, a lower back facet reflectivity is suitable to suppress the propagation of modes outside of the ridge waveguide and the tapered section by keeping the output power at nearly the same level. Therefore, we can improve the spatial as well as the spectral beam quality.
- 12 January 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 22 (5) , 341-343
High-Brightness 980-nm Tapered Laser— Optimization of the Laser Rear Facet
We present experimental results on a gain-guided tapered diode laser with rear facet coating variation from 98% down to 5% reflectivity. We show that in comparison to the common high reflection coating, a lower back facet reflectivity is suitable to suppress the propagation of modes outside of the ridge waveguide and the tapered section by keeping the output power at nearly the same level. Therefore, we can improve the spatial as well as the spectral beam quality.
- 30 November 2009
- Published by Optica Publishing Group in Optics Express
- Vol. 17 (25) , 22785-22790
Compact second-harmonic generation laser module with 1 W optical output power at 490 nm
We demonstrate continues-wave 1 W at 490 nm on a 2.5 cm3 micro-optical bench using single-path second-harmonic generation with a periodically poled MgO:LiNbO3 bulk crystal. The pump laser is a distributed Bragg reflector tapered diode laser having a single-frequency spectrum and a pump power of 9.5 W. Based on that 1 W blue light could be achieved resulting in an optical conversion efficiency of 11%. Furthermore, the module has an output power stability of better than 2% and the blue laser beam shows an nearly diffraction limited beam quality of M2 σ = 1.2 in vertical and M2 σ = 2 in lateral direction.
- 30 November 2009
- Published by Optica Publishing Group in Optics Express
- Vol. 17 (25) , 22785-22790
Compact second-harmonic generation laser module with 1 W optical output power at 490 nm
We demonstrate continues-wave 1 W at 490 nm on a 2.5 cm3 micro-optical bench using single-path second-harmonic generation with a periodically poled MgO:LiNbO3 bulk crystal. The pump laser is a distributed Bragg reflector tapered diode laser having a single-frequency spectrum and a pump power of 9.5 W. Based on that 1 W blue light could be achieved resulting in an optical conversion efficiency of 11%. Furthermore, the module has an output power stability of better than 2% and the blue laser beam shows an nearly diffraction limited beam quality of M2 σ = 1.2 in vertical and M2 σ = 2 in lateral direction.
- 24 November 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components and Packaging Technologies
- Vol. 33 (1) , 206-214
Conductively Cooled 1 kW—QCW Diode Laser Stacks Enabling Simple Fiber Coupling
A new mini-bar design densely packed with 13 emitters in a 1.6 mm aperture has been developed. These mini-bars deliver >200 W output. With a very low divergence of 95% power enclosed in 25° they are suitable for fast axis collimation (FAC) lenses with large working distance. The mini-bars are mounted on compact CuW carriers, which are further integrated into a custom stack assembly where they are conductively cooled from both sides. This completely AuSn soldered stack consists of only coefficient of thermal expansion matched materials and was 100 times temperature cycled from -40°C to 85°C, without any change in the PUI characteristic, the spectrum and the far field. The beam propagation factor M 2 of a 12-layer stack is ¿130 in the vertical direction (after FAC) and ¿210 in the lateral direction. Thus, the stack can be coupled to a 1.2 mm multi-mode fiber (M 2 = 260) with a coupling efficiency of 90% using only low-cost lenses.
- 24 November 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components and Packaging Technologies
- Vol. 33 (1) , 206-214
Conductively Cooled 1 kW—QCW Diode Laser Stacks Enabling Simple Fiber Coupling
A new mini-bar design densely packed with 13 emitters in a 1.6 mm aperture has been developed. These mini-bars deliver >200 W output. With a very low divergence of 95% power enclosed in 25° they are suitable for fast axis collimation (FAC) lenses with large working distance. The mini-bars are mounted on compact CuW carriers, which are further integrated into a custom stack assembly where they are conductively cooled from both sides. This completely AuSn soldered stack consists of only coefficient of thermal expansion matched materials and was 100 times temperature cycled from -40°C to 85°C, without any change in the PUI characteristic, the spectrum and the far field. The beam propagation factor M 2 of a 12-layer stack is ¿130 in the vertical direction (after FAC) and ¿210 in the lateral direction. Thus, the stack can be coupled to a 1.2 mm multi-mode fiber (M 2 = 260) with a coupling efficiency of 90% using only low-cost lenses.
- 21 November 2009
- Published by Springer Nature in Applied Physics B
- Vol. 99 (1-2) , 209-214
Experimental and numerical study of Distributed-Bragg-Reflector tapered lasers
- 21 November 2009
- Published by Springer Nature in Applied Physics B
- Vol. 99 (1-2) , 209-214
Experimental and numerical study of Distributed-Bragg-Reflector tapered lasers
- 29 September 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 21 (23) , 1755-1757
Tapered Diode Laser With Reverse Bias Absorber Section
We present experimental results about gain-guided tapered diode laser having reverse bias absorber sections beside the ridge-waveguide. Due to these sections, we can avoid the propagation of unwanted modes outside the cavity. Therefore, the beam quality factor at about 6.5 W can be reduced from M sigma 2=8 down to M sigma 2=5 . Furthermore, the laser shows a more stable spectral behavior at high output power levels.
- 29 September 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 21 (23) , 1755-1757
Tapered Diode Laser With Reverse Bias Absorber Section
We present experimental results about gain-guided tapered diode laser having reverse bias absorber sections beside the ridge-waveguide. Due to these sections, we can avoid the propagation of unwanted modes outside the cavity. Therefore, the beam quality factor at about 6.5 W can be reduced from M sigma 2=8 down to M sigma 2=5 . Furthermore, the laser shows a more stable spectral behavior at high output power levels.
- 18 February 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 15 (3) , 978-983
High-Power DBR-Tapered Laser at 980 nm for Single-Path Second Harmonic Generation
We present experimental results about edge-emitting distributed-Bragg-reflector-tapered diode lasers emitting at 980 nm. The investigated lasers show an output power of up to 12 W with a conversion efficiency of about 45%. The lasers also exhibit a small vertical divergence <15deg full-width at half maximum (FWHM), a nearly diffraction-limited beam quality, and a narrow spectral linewidth with FWHM smaller than 12 pm. These properties allow efficient single-pass second harmonic generation with power levels of more than 1 W at 488 nm.
- 18 February 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 15 (3) , 978-983
High-Power DBR-Tapered Laser at 980 nm for Single-Path Second Harmonic Generation
We present experimental results about edge-emitting distributed-Bragg-reflector-tapered diode lasers emitting at 980 nm. The investigated lasers show an output power of up to 12 W with a conversion efficiency of about 45%. The lasers also exhibit a small vertical divergence <15deg full-width at half maximum (FWHM), a nearly diffraction-limited beam quality, and a narrow spectral linewidth with FWHM smaller than 12 pm. These properties allow efficient single-pass second harmonic generation with power levels of more than 1 W at 488 nm.