Merike Vaher
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Merike Vaher has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Mihkel Koel
Institute of Chemistry, Tallinn Technical University, Akadeemia tee, Tallinn, Estonia
6 shared publicationsMihkel Kaljurand
Institute of Chemistry, Tallinn Technical University, Akadeemia tee, Tallinn, Estonia
4 shared publicationsAndres Mähar
Tallinn Pedagogical University
1 shared publicationArkadi Ebber
Department of Chemistry, Tallinn University of Technology, Tallinn, Estonia
1 shared publicationImants Taure
Nuclear Research Centre of Latvian Academy of Sciences
1 shared publicationJana Kazarjan
Institute of Chemistry, Tallinn Technical University, Akadeemia tee, Tallinn, Estonia
1 shared publication
Latest Publications
- 14 January 2015
- Published by Wiley in Electrophoresis
- Vol. 36 (7-8) , 1040-1042
Aggregation of phosphate and 1-tetradecyl-3-methylimidazolium chloride background electrolytes during micellar electrokinetic chromatography
- 14 January 2015
- Published by Wiley in Electrophoresis
- Vol. 36 (7-8) , 1040-1042
Aggregation of phosphate and 1-tetradecyl-3-methylimidazolium chloride background electrolytes during micellar electrokinetic chromatography
- 30 March 2011
- Published by Wiley in Electrophoresis
- Vol. 32 (9) , 1068-1073
Capillary electrophoretic analysis of neutral carbohydrates using ionic liquids as background electrolytes
In this study, ionic liquids (ILs) as BGE additives were applied for the analysis of neutral carbohydrates in CE. The ILs served primarily as chromophores for indirect UV detection. The influence of imidazolium‐based ionic liquids on the separation, detection limits and mobility of underivatized neutral carbohydrates was investigated. BGEs consisting of 10–50 mM of ILs at pH 12.4 without other additives provided fast separation of neutral sugars. This method was used to determine sucrose, glucose and fructose in certain vegetable juices.
- 30 March 2011
- Published by Wiley in Electrophoresis
- Vol. 32 (9) , 1068-1073
Capillary electrophoretic analysis of neutral carbohydrates using ionic liquids as background electrolytes
In this study, ionic liquids (ILs) as BGE additives were applied for the analysis of neutral carbohydrates in CE. The ILs served primarily as chromophores for indirect UV detection. The influence of imidazolium‐based ionic liquids on the separation, detection limits and mobility of underivatized neutral carbohydrates was investigated. BGEs consisting of 10–50 mM of ILs at pH 12.4 without other additives provided fast separation of neutral sugars. This method was used to determine sucrose, glucose and fructose in certain vegetable juices.
- 17 October 2007
- Published by Wiley in Electrophoresis
- Vol. 28 (20) , 3600-3605
Nonaqueous CE using contactless conductivity detection and ionic liquids as BGEs in ACN
N,N′‐Alkylmethylimidazolium cations have been separated in NACE when one of the N,N′‐dialkylimidazolium salts (ionic liquids (ILs)) was used as an electrolyte additive to the organic solvent separation medium. The separated species were 1‐methyl‐, 1‐ethyl‐, 1‐butyl‐, 1‐octyl‐, 1‐decyl‐3‐methylimidazolium and N‐butyl‐3‐methylpyridinium cations and BGE composed of 1‐ethyl‐3‐methylimidazolium ethylsulfate or 1‐butyl‐3‐methylimidazolium trifluoroacetate [BMIm][FAcO] (A6; B2) diluted in ACN. It was demonstrated that contactless conductivity detection (CCD) may be applied to monitoring the separation process in nonaqueous separation media, allowing to use the UV light‐absorbing imidazolium‐based electrolyte additives. There could be marked three concentration regions of added ILs; at first ionic strength of BGE below 1–2 mM, and then the actual electrophoretic mobility of analytes rises from 0. At concentrations above 1–2 mM, the added IL facilitated separation. In concentration region of 1–20 mM, the actual electrophoretic mobility of analyzed imidazolium cations was increasing with decrease in separation medium ionic strength. At higher concentrations of BGE (above 30 mM), the conductivity of the separation media became too high for this detector. Some organic dyes were also successfully separated and detected by contactless conductivity detector in a 20 mM A6 separation electrolyte in ACN.
- 17 October 2007
- Published by Wiley in Electrophoresis
- Vol. 28 (20) , 3600-3605
Nonaqueous CE using contactless conductivity detection and ionic liquids as BGEs in ACN
N,N′‐Alkylmethylimidazolium cations have been separated in NACE when one of the N,N′‐dialkylimidazolium salts (ionic liquids (ILs)) was used as an electrolyte additive to the organic solvent separation medium. The separated species were 1‐methyl‐, 1‐ethyl‐, 1‐butyl‐, 1‐octyl‐, 1‐decyl‐3‐methylimidazolium and N‐butyl‐3‐methylpyridinium cations and BGE composed of 1‐ethyl‐3‐methylimidazolium ethylsulfate or 1‐butyl‐3‐methylimidazolium trifluoroacetate [BMIm][FAcO] (A6; B2) diluted in ACN. It was demonstrated that contactless conductivity detection (CCD) may be applied to monitoring the separation process in nonaqueous separation media, allowing to use the UV light‐absorbing imidazolium‐based electrolyte additives. There could be marked three concentration regions of added ILs; at first ionic strength of BGE below 1–2 mM, and then the actual electrophoretic mobility of analytes rises from 0. At concentrations above 1–2 mM, the added IL facilitated separation. In concentration region of 1–20 mM, the actual electrophoretic mobility of analyzed imidazolium cations was increasing with decrease in separation medium ionic strength. At higher concentrations of BGE (above 30 mM), the conductivity of the separation media became too high for this detector. Some organic dyes were also successfully separated and detected by contactless conductivity detector in a 20 mM A6 separation electrolyte in ACN.
- 30 June 2006
- Published by Wiley in Electrophoresis
- Vol. 27 (13) , 2582-2589
Characterization of the antioxidative activity of novel nontoxic neuropeptides by using capillary electrophoresis
In the present study, we have monitored the oxidation process of novel nontoxic neuropeptides and determined its rate constants, which describe the antioxidative potential of the peptides. A capillary electrophoretic method was implemented which ensures the simultaneity of analysis of reactants and products in a short time of analysis. The rate constants of oxidation of the four novel peptides, 4‐methoxy‐L‐tyrosinyl‐γ‐L‐glutamyl‐L‐cysteinyl‐glycine (UPF1), D‐serinyl‐γ‐L‐glutamyl‐L‐cysteinyl‐glycine (UPF6), 4‐methoxy‐L‐tyrosinyl‐α‐L‐glutamyl‐L‐cysteinyl‐glycine and D‐serinyl‐α‐L‐glutamyl‐L‐cysteinyl‐glycine, designed by us, were compared with those of oxidation of glutathione (reduced glutathione) by using capillary electrophoresis. The second‐order rate constants were similar for all peptides if the oxidation was carried out with hydrogen peroxide (kII = 0.208 — 0.236×103/M·min). The rate constants were also determined for the mixtures of peptides. When the oxidation is caused by hydroxyl radical (OH*), the γ‐glutamate containing peptides (UPF1 and UPF6) exhibited two to four times higher antioxidative activity (kII = 4.428 and 2.152×103/M·min, respectively). The results suggest that the antioxidative potential of the peptides studied is not determined by the formation of disulphide bridge alone.
- 30 June 2006
- Published by Wiley in Electrophoresis
- Vol. 27 (13) , 2582-2589
Characterization of the antioxidative activity of novel nontoxic neuropeptides by using capillary electrophoresis
In the present study, we have monitored the oxidation process of novel nontoxic neuropeptides and determined its rate constants, which describe the antioxidative potential of the peptides. A capillary electrophoretic method was implemented which ensures the simultaneity of analysis of reactants and products in a short time of analysis. The rate constants of oxidation of the four novel peptides, 4‐methoxy‐L‐tyrosinyl‐γ‐L‐glutamyl‐L‐cysteinyl‐glycine (UPF1), D‐serinyl‐γ‐L‐glutamyl‐L‐cysteinyl‐glycine (UPF6), 4‐methoxy‐L‐tyrosinyl‐α‐L‐glutamyl‐L‐cysteinyl‐glycine and D‐serinyl‐α‐L‐glutamyl‐L‐cysteinyl‐glycine, designed by us, were compared with those of oxidation of glutathione (reduced glutathione) by using capillary electrophoresis. The second‐order rate constants were similar for all peptides if the oxidation was carried out with hydrogen peroxide (kII = 0.208 — 0.236×103/M·min). The rate constants were also determined for the mixtures of peptides. When the oxidation is caused by hydroxyl radical (OH*), the γ‐glutamate containing peptides (UPF1 and UPF6) exhibited two to four times higher antioxidative activity (kII = 4.428 and 2.152×103/M·min, respectively). The results suggest that the antioxidative potential of the peptides studied is not determined by the formation of disulphide bridge alone.
- 1 March 2005
- Published by Elsevier in Journal of Chromatography A
- Vol. 1068 (1) , 83-88
Specific background electrolytes for nonaqueous capillary electrophoresis
- 1 March 2005
- Published by Elsevier in Journal of Chromatography A
- Vol. 1068 (1) , 83-88
Specific background electrolytes for nonaqueous capillary electrophoresis
- 18 June 2004
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 379 (5-6) , 849-852
Analysis of bioactive ingredients in the brown alga Fucus vesiculosus by capillary electrophoresis and neutron activation analysis
Two different types of bioactive components of the seaweed Fucus vesiculosus were analysed: (1) polyphenols (phlorotannins) by capillary electrophoresis (CE) and (2) mineral part (including bioactive microelements) by neutron activation analysis (NAA). CE experiments were carried out using a UV detector (at 210 nm) and an uncoated silica capillary. The best separation was achieved at a voltage of 20 kV using borate or acetate buffer in a methanol/acetonitrile mixture as background electrolyte. The CE analysis data were confirmed by high-performance liquid chromatography (HPLC). Determination of mineral composition of algal biomass by NAA was performed on the basis of various nuclides; the best results (from 38 elements determined) were obtained for Mn, Fe, Zn, As, Br, Sr, I, Ba, Au and Hg.
- 18 June 2004
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 379 (5-6) , 849-852
Analysis of bioactive ingredients in the brown alga Fucus vesiculosus by capillary electrophoresis and neutron activation analysis
Two different types of bioactive components of the seaweed Fucus vesiculosus were analysed: (1) polyphenols (phlorotannins) by capillary electrophoresis (CE) and (2) mineral part (including bioactive microelements) by neutron activation analysis (NAA). CE experiments were carried out using a UV detector (at 210 nm) and an uncoated silica capillary. The best separation was achieved at a voltage of 20 kV using borate or acetate buffer in a methanol/acetonitrile mixture as background electrolyte. The CE analysis data were confirmed by high-performance liquid chromatography (HPLC). Determination of mineral composition of algal biomass by NAA was performed on the basis of various nuclides; the best results (from 38 elements determined) were obtained for Mn, Fe, Zn, As, Br, Sr, I, Ba, Au and Hg.
- 1 March 2003
- Published by Elsevier in Journal of Chromatography A
- Vol. 990 (1-2) , 225-230
Separation of polyphenolic compounds extracted from plant matrices using capillary electrophoresis
- 1 March 2003
- Published by Elsevier in Journal of Chromatography A
- Vol. 990 (1-2) , 225-230
Separation of polyphenolic compounds extracted from plant matrices using capillary electrophoresis
- 1 December 2002
- Published by Elsevier in Journal of Chromatography A
- Vol. 979 (1-2) , 27-32
Application of 1-alkyl-3-methylimidazolium-based ionic liquids in non-aqueous capillary electrophoresis
- 1 December 2002
- Published by Elsevier in Journal of Chromatography A
- Vol. 979 (1-2) , 27-32
Application of 1-alkyl-3-methylimidazolium-based ionic liquids in non-aqueous capillary electrophoresis
- 18 February 2002
- Published by Wiley in Electrophoresis
- Vol. 23 (3) , 426-430
Ionic liquids as electrolytes for nonaqueous capillary electrophoresis
Acetonitrile is a well-suited medium for nonaqueous capillary electroseparations and enables extending the range of applications of capillary electrophoresis (CE) techniques to more hydrophobic species. In this study, the dialkylimidazolium-based low temperature melting organic salts know as “ionic liquids” (ILs) are used as electrolytes. At room temperature these liquids are miscible with acetonitrile which makes it easy to use them for adjustment of analyte mobility and separation. The anionic part as well as the concentration of an IL influence the general electrophoretic mobility of the buffer system. The separation of different analytes is achieved because they become charged in the presence of ILs in separation media. There is also a possibility for a complex formation between the solute and the electrolyte which alters the mobility of the solute. A selected application of separations of phenols and aromatic acids will be discussed.
- 18 February 2002
- Published by Wiley in Electrophoresis
- Vol. 23 (3) , 426-430
Ionic liquids as electrolytes for nonaqueous capillary electrophoresis
Acetonitrile is a well-suited medium for nonaqueous capillary electroseparations and enables extending the range of applications of capillary electrophoresis (CE) techniques to more hydrophobic species. In this study, the dialkylimidazolium-based low temperature melting organic salts know as “ionic liquids” (ILs) are used as electrolytes. At room temperature these liquids are miscible with acetonitrile which makes it easy to use them for adjustment of analyte mobility and separation. The anionic part as well as the concentration of an IL influence the general electrophoretic mobility of the buffer system. The separation of different analytes is achieved because they become charged in the presence of ILs in separation media. There is also a possibility for a complex formation between the solute and the electrolyte which alters the mobility of the solute. A selected application of separations of phenols and aromatic acids will be discussed.