MBMarvin T. Batte

Marvin T. Batte

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marvin T. Batte has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Soil Quality Responses to Gypsum and Cover Crops in No-Till Soybean–Corn Rotations Across the Midwest and Southeast U.S

    by Rafiq Islam, Javier Gonzalez, Dexter Watts, Arifur Rahman, Warren Dick, Randall Reeder, Norman Fausey, Tara VanToai, Dennis Flanagan, Marvin Batte

    Soil quality (SQ) refers to the soil’s capacity, as influenced by management practices, to sustain productivity, maintain environmental quality, and provide essential ecosystem services. The impacts (2012–2016) of gypsum application, cover cropping, and crop rotation on SQ were evaluated under rainfed no-till (NT) systems at sites in Shorter, Alabama; Farmland, Indiana; and Hoytville and Piketon, OH, USA. Experimental treatments were arranged in a randomized complete block design in a factorial combination of gypsum (0, 1.1, and 2.2 Mg ha−1), cover crop [cereal rye (Secale cereale) or no cover], and crop rotations as follows: soybean (Glycine max; SS), corn (Zea mays)–soybean (CS), and soybean–corn (SC). Composite soil samples were collected at 0–15 and 15–30 cm depths and analyzed for biological, chemical, and physical properties to compute a comprehensive SQ index (SQIComp). Principal component analysis identified a minimum dataset (MDS), including microbial biomass, organic carbon, and mean weight diameter, used to compute SQIMDS. Applying gypsum at 2.2 Mg ha−1 increased SQIComp by 3–7% and SQIMDS by 7–17% at most sites compared with the control. The CS rotation produced the highest SQ, exceeding SS by 5–10%. Cover crops had minimal overall effects on SQ, except in Indiana. When averaged across all sites, SQ differences between depths were 19% for SQIComp and 33% for SQIMDS. Significant linear relationships between SQIMDS and SQIComp indicate that SQIMDS accounted for most of the variability (R2 = 0.77–0.94) in SQIComp. Overall, gypsum application at 2.2 Mg ha−1 and the CS rotation improved surface SQ under NT systems, and SQIMDS is better suited for relative comparisons than for absolute quantification.

  • Open Access

    Quantifying Soil Carbon and Nitrogen Stocks for Sustainability Assessment: Implications of Fixed-Depth and Equivalent Soil Mass Methods

    by K.R Islam, Dexter B. Watts, Javier M. Gonzalez, Warren A. Dick, Norman R. Fausey, Randall C. Reeder, Dennis C. Flanagan, Tara T. VanToai, Marv T. Batte

    Carbon and nitrogen are stoichiometrically coupled in soil organic matter (SOM) and underpin key ecosystem services; therefore, their accurate quantification is essential for evaluating the carbon marketing benefits of conservation agricultural practices. This study assessed agreement and bias between fixed-depth (FD) and equivalent soil mass (EM) approaches for estimating soil organic carbon (SOC) and total nitrogen (TN) stocks in a 5-year study under no-till systems amended with gypsum under soybean (Glycine max L. Merr.) –corn (Zea mays L.) rotations, with and without cereal rye (Secale cereale L.) cover crops. Soils were collected at 0–15 and 15–30 cm depths from replicated field experiments across four sites in the USA with contrasting soils and climates: Shorter, east-central Alabama; Farmland, east-central Indiana; Hoytville, northern Ohio; and Piketon, southern Ohio. SOC and TN stocks were calculated using FD and EM methods, with EM values adjusted using depth-correction factors derived from baseline and final bulk density (ρb) measurements. ρb varied significantly among sites and increased by an average of 6.8% over five years, exhibiting site-specific trajectories. Regression analyses showed significant positive relationships between FD- and EM-derived SOC (R² = 0.59 to 0.96) and TN stocks (R² = 0.31 to 0.93) among sites and across sites (R2 = 0.96). Similar relationships were observed for profile-wise SOC and TN stocks both among and across sites. However, FD estimates showed site-dependent bias, underestimating EM-based stocks at Shorter (east-central Alabama), Farmland (east-central Indiana), and Hoytville (northern Ohio), while overestimating SOC (820 kg ha-1) and TN (63 kg ha-1) stocks at Piketon (southern Ohio). The largest TN underestimation (1.11 Mg ha-1) occurred at Hoytville (northern Ohio). Despite these discrepancies, site- and depth-average FD estimates did not differ significantly from EM values. Overall, while FD approaches captured general trends, EM-based calculations provided a less biased assessment when ρb changed over time, thereby improving SOC and TN stock estimates for conservation of agricultural practices and potential carbon market applications. These findings support adopting EM methods in long-term trials, especially where comparability among diverse management systems, sites, and credible reporting for emerging environmental markets and policy frameworks.

  • Competition Between Local Dealerships and Internet Markets: The Role of Local Relationships, Risk Tolerance, and Trust in Used Farm Machinery Markets

    by Brian E. Roe, Marvin T. Batte, Florian Diekmann

    We analyze recent and intended transactions of used farm equipment and find the quality of buyers' relationships with local equipment dealers influences whether their most recent purchase came from an Internet source and whether they will consider future purchases from Internet sources. We find local dealers who provide excellent parts and repair service face a double‐edged sword: customers are less likely to have purchased from Internet sources during their last transaction but express stronger absolute interest in future Internet purchases. Also, customers who view their dealer as having treated them fairly during past price negotiations are less likely to express interest in transacting on the Internet in the future. Finally, buyers sort across channels based on several personal characteristics, including risk tolerance, trust attitudes, and negotiation style, but seller sorting is primarily based on risk tolerance. Specifically, buyers and sellers with greater risk tolerance sort to online markets. [JEL Descriptors: L81, Q12].


  • Open Access

    Consumer preferences for local production and other value-added label claims for a processed food product

    by Wuyang Hu, Marvin T. Batte, Timothy Woods, Stan Ernst

    Using stated preference data from Kentucky and Ohio, USA, we estimate consumer willingness-to-pay for varieties of a processed food product (blackberry jam) that are differentiated with respect to their local production labelling and a series of other value-added claims. Results show that consumers were willing to pay more for the product indicating locally produced, produced in their state or in a well-identified multi-state region. Consumers were willing to purchase organic products, although there might be some confusion as to the meaning of the organic logo. Our results also supported the notion that consumers are willing to support small family farms.


  • Consumer Self‐Confidence in Searching for Information

    by Cäzilia Loibl, Soo Hyun Cho, Florian Diekmann, Marvin T. Batte

    Consumer behavior is often driven by the extent to which consumers feel confident regarding their decisions, which frequently hinge, especially in high‐stakes situations, on their information search. This article examines a multidimensional self‐confidence concept to explore how consumer self‐confidence influences information search. Findings of a mail survey document that high‐confidence consumers engage in more intensive search activities and that demographic patterns shape consumer self‐confidence scores. The findings empirically support a multidimensional measurement of self‐confidence to predict search behavior and suggest avenues to enhance the self‐confidence needed to produce positive marketplace experiences.


  • Measures of Economic and Environmental Performance for Alternative Agricultural Production Systems

    by Marvin T. Batte, Kevin J. Bacon, Jeffrey W. Hopkins

    The primary purpose of the reported research was to evaluate the economic and environmental performance of three production systems under study in the Ohio Buried Valley Aquifer Management Systems Evaluation Area (MSEA) project. The three systems studied included a monoculture system—continuous corn (Zea mays L.) (chisel plow) with routine fertilizer and pesticide treatments; the typical system—a corn/soybean [Glycine max (L.) Merr.] rotation (chisel plow and no‐till) with routine applications of pesticides and fertilizers; and an alternative system—a corn/soybean/wheat (Triticum aestivum L.)‐hairy vetch (Vicia villosa Roth subsp. villosa) rotation (ridge‐tilled) with fertilization based on soil tests and strategic applications of pesticides. Enterprise and whole farm budgets were constructed for each system. All sources of receipts and costs arising from production were recognized in the profitability analysis. The typical system was found to have the highest return to management and the monoculture system the lowest return. The alternative system produced net returns of about 50% of those of the typical system. The wheat phase of the alternative system was the primary source of reduced returns. A linear programming analysis was conducted to compare profitability for the three systems with farm size variable (machinery complement capacity was the determinant of farm size). The LP results suggested a widening of the profit differential between typical and alternative systems due to a greater acreage capacity for the typical system. However, results suggested that if wheat yieldls were increased through spring application of N fertilizer for wheat, the alternative system would be about equal in profits to the typical system. Environmental impact assessment, evaluated through use of the Erosion‐Productivity Impact Calculator (EPIC), suggested lesser environmental consequences resulting from the alternative system than from either of the other studied systems. Adjustments in the alternative system to improve profitability brought little environmental downside.Research Question: The primary purpose of the reported research was to evaluate the economic and environmental performance of three production systems under study in the Ohio Buried Valley Aquifer Management Systems Evaluation Area (MSEA) project. Additionally, this research explores the differences in potential farm size that might be realized under selected alternative farming systems and how these size differentials might affect the financial performance of the farm.Literature Summary: There have been a number of studies that report economic performance comparisons for various tillage system designs. Most studies have shown significant differences in fertilizer and herbicide/pesticide costs among systems. Differences in crop yields also have been observed by many researchers, although there is contradictory evidence as to this impact. Investments in durable capital assets, and in the resulting level of overhead costs, also have been shown to be important. However, most of the economic performance studies have a common weakness: They fail to account for differences in the capacity of a fixed‐size machinery complement, and hence the size of the farming business.Study Description: The three systems studied included a monoculture system—continuous corn (chisel plow) with routine fertilizer and pesticide treatments; the typical system—a corn/soybean rotation (chisel plow and no‐till) with routine applications of pesticides and fertilizers; and an alternative system—a corn/soybean/wheat‐hairy vetch rotation (ridge‐tilled) with fertilization based on soil tests and strategic applications of pesticides. Enterprise and whole farm budgets were constructed for each system. A linear programming analysis was conducted to compare profitability for the three systems with farm size variable (machinery complement capacity was the determinant of farm size). The Erosion‐Productivity Impact Calculator (EPIC) simulator was used to estimate field‐level impacts of these farming systems on soil erosion and ground water concentrations of nitrate N and the herbicides atrazine and alachlor.Applied Questions: How do alternative farm production systems differ with respect to input use and financial performance?The design of the studied systems results in substantial variation in input use among the systems. Fertilizer expenditures per acre for corn were largest for the monoculture system and smallest for the alternative farming systems. Herbicide and insecticide expenditures also were smaller for the typical and alternative systems relative to the monoculture system. Machinery operating costs were greatest for the monoculture system and lowest for the alternative system. These machine operating cost differences were due to differences in usage hours of machinery among systems. Due to the reduced amount of investment in specialized equipment, the monoculture system had the lowest total durable capital investment of the three systems studied, and thus displayed the lowest overhead costs. The alternative and typical systems required approximately equal machinery investments. Evaluated at a 500 acre farm size, the total cost of production (per rotation acre) was highest for the monoculture system and lowest for the alternative system. Profitability was largest for the typical system and was approximately equal for the monoculture and alternative farming systems.How do these favming systems differ with respect to machinery capacity and how does this impact farm profitability?Each production system places a different set of demands on equipment capacity and operator labor. This translates to different acreage capacity limits for planting and harvest seasons, and ultimately identifies a maximum farm size fix a given system and for expected weather conditions. Analysis with a common farm size unfairly penalizes those technologies that most efficiently use the constraining resources. A linear programming model was developed to evaluate profitability of these systems under optimal resource organization (and fm size) when farm machinery capacity was the limiting factor. Total farm net returns differed widely when compared at the maximum (machinery constrained) farm size. The monoculture system produced the smallest net return, a product both of the smaller farm size and the higher total cost of corn production. Although the alternative farming system had the lowest cost per rotation (average) acre, total farm net returns were about midway between those of the monoculture and typical systems. This lower net return was due in part to the reduced farm size (42 acres less than for the typical system), but was primarily due to the low‐yielding wheat crop and the diminished net returns from this portion of the rotation. Modifications were made to the alternative system model to explore likely impacts on profits from changes in the fertilization program. These results suggest that, with application of additional N fertilizers, the alternative system can increase profit to levels comparable with the typical system.Are there important field‐level environmental differences among the studied systems?Environmental effects of alternative farming systems under experiment at the Ohio MSEA site were modeled using EPIC. Results suggested that the typical and monoculture systems resulted in approximately the same level of erosion and that the alternative system resulted in lower levels of soil erosion. Nitrate N leachate concentrations also differed among the systems, with the highest average losses occuring for the monoculture system and the lowest average losses for the alternative system. A third effluent considered was atrazine, an herbicide used in corn production. Atrazine losses were higher for the monoculture system because a full rate of 3 lb/acre of active ingreditmt was used every year. For the typical system, a half rate was used on the corn year and no atrazine was applied on soybeans, so losses were correspondingly less, and higher during the year in which atrazine was applied. Under the alternative system atrazine was only applied every third year, when corn was grown, and even then was applied at a reduced rate because it was banded on the crop—mechanical cultivation was used to control weeds in row middles. Finally, concentration rates for the herbicide alachlor were estimated using EPIC. Although all systems resulted in relatively low losses of alachlor, relative to the maximum contamination level established by the Ohio EPA of 100 parts/billion, the monoculture system resulted in the highest loss levels in most years and the alternative system resulted in the smallest average losses.