Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Philippe Duquenne has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bioaerosol Exposure during Sorting of Municipal Solid, Commercial and Industrial Waste: Concentration Levels, Size Distribution, and Biodiversity of Airborne Fungal

    by Philippe Duquenne, Xavier Simon, Catherine Coulais, Véronique Koehler, Jodelle Degois, Brigitte Facon

    A study was carried out in a waste sorting plant (WSP) located in France, treating dry recyclable household waste (DRHW) as well as dry recyclable commercial and industrial waste (DRCIW). Stationary and personal inhalable samples were collected in the WSP in order to investigate bioaerosols (sampling on a filter; 2 L/min and 10 L/min) and airborne dust (CIP; 10 L/min). The aim of the study was to assess the extent to which the measurement of concentration, species composition, and particle size distribution contributes to a better assessment of the biological risks associated with exposure. The results confirmed that waste and waste sorting activities are sources of airborne fungi. Indeed, ambient concentrations ranged from 7.3 × 103 to 8.5 × 105 colony-forming units (CFU)/m3 for culturable fungi and up to 4 mg/m3 for dust. Personal exposure to inhalable dust was found up to 3 mg/m3 for dust and ranged from 8.6 × 103 to 1.5 × 106 CFU/m3 for fungi. Airborne fungal communities were found to be dominated by the Penicillium genera in both bioaerosols and settled dust samples, followed by the Aspergillus, Cladosporium, Wallemia, Mucor, and Rhizopus genera. Fungi were carried by particles of aerodynamic diameters, mainly between around 2.0 and 10.0 µm. The findings dealing with size distribution and biodiversity of bioaerosols suggest that employees are exposed to complex bioaerosols during their work and help to make a finer diagnosis of the risks involved, which is often difficult in the absence of any occupational exposure limit (OEL) value for bioaerosols in general.


  • Open Access

    Bioaerosol Exposure during Sorting of Municipal Solid, Commercial and Industrial Waste: Concentration Levels, Size Distribution, and Biodiversity of Airborne Fungal

    by Philippe Duquenne, Xavier Simon, Catherine Coulais, Véronique Koehler, Jodelle Degois, Brigitte Facon

    A study was carried out in a Waste Sorting Plant (WSP) located in France and treating dry recyclable household waste (DRHW) as well as dry recyclable commercial and industrial waste (DRCIW). The aim was to investigate the exposure to bioaerosol and dust. The aim of the study was to assess the extent to which the measurement of concentration, species composition and particle size distribution can contribute to a better assessment of the biological risks associated with exposure. Both stationary and personal bioaerosol and dust samples were collect in the (WSP). The results confirm that waste and waste sorting activities are sources of airborne fungi. Indeed, ambient concentrations ranged from 7.3×103 to 8.5×105 CFU/m3 for culturable moulds and up to up to 4 mg/m3 for dust. Personal exposure to inhalable dust was found up to 3 mg/m3 for dust and ranged from 8.6×103 to 1.5×106 CFU/m3 for fungi. Airborne fungal communities were found to be dominated by the Penicillium genera in both bioaerosols and settled dust samples, followed by the Aspergillus, Cladosporium, Wallemia, Mucor, and Rhizopus genera. Fungi were carried by particles of aerodynamic diameters mainly between around 2.0 and 10.0 µm. The findings dealing with size distribution and biodiversity of bioaerosols suggest that employees are exposed to complex bioaerosols during their work and helps to make a finer diagnosis of the risks involved, which is often difficult in the absence of any OEL for bioaerosols in general.


  • Open Access

    A comparative study of real-time monitoring detection and active sampling measurements in evaluating exposure levels to ammonia.

    by Patricia Battais, Francis Bonthoux, Sullivan Lechêne, Juliette Kunz-Iffli, Nathalie Monta, Jérôme Grosjean, Philippe Duquenne

    Occupational exposure to ammonia is an important issue in the waste management sector, especially in composting and anaerobic digestion plants. In this sector, operators can be exposed to high contents of ammonia which is important to assess. The aim of this work was to provide a comparative study of two ammonia measurement techniques in the workplace air. The first one is an offline active collection of air samples that are then brought to laboratory for analysis and whose results are comparable to OELs. The second one involves real-time monitoring which is easy to deploy, allows for data to be processed both quickly and directly and to explain exposure peaks relative to workers’ activity. These two techniques were simultaneously deployed in several anaerobic digestion-composting plants to assess operators’ potential exposure to ammonia, and data were compared. Results show that there are linear correlations between concentrations obtained from both methods, with a trend to overestimate real concentrations in ammonia for several real-time detectors. This trend could however be explained by the time needed for exposure peaks to decrease. Real-time gas detectors, if cautiously used, are good investigation tools to quickly confirm or invalidate the presence of ammonia in the workplace atmosphere, and for both studying and optimising the workplace. The combination of both online and offline methods facilitates the analysis of a work area or station in order to improve the efficiency of prevention measures and to provide an accurate quantification of operators’ exposure for compliance checking of OELs.


  • One-year follow-up of microbial diversity in bioaerosols emitted in a waste sorting plant in France

    by Jodelle Degois, Xavier Simon, Frédéric Clerc, Cyril Bontemps, Pierre Leblond, Philippe Duquenne


  • Open Access

    Workplace Biological Risk Assessment: Review of Existing and Description of a Comprehensive Approach

    by Sarah Burzoni, Philippe Duquenne, Gautier Mater, Luc Ferrari

    Biological risks potentially affect workers in multiple occupational sectors through their exposure to pathogenic agents. These risks must be carefully assessed to prevent adverse health effects. This article identifies and critically analyzes approaches that manage the qualitative evaluation of biological risk (EvBR) as part of occupational health and safety prevention, for which no standard method yet exists. Bibliographic and computing references were searched to identify qualitative EvBR approaches, which were then analyzed based on defined criteria, such as the risks studied and the type of assessment. Approaches proposing the most representative types of assessment were analyzed. EvBR approaches in an occupational setting were identified in 32 sources. “Workstation analysis” combined with “assessment by risk level” were the most common approaches. The predominant risk descriptors (RDs) were defined in a characterized and quantifiable way, and a variety of hazard levels and exposure indices were created. Overall, the risk was determined by summing or multiplying the hazard level and exposure indicators. The results confirmed that no methodological consensus currently exists regarding the EvBR and no approach has yet been described that integrates all the parameters to allow for a full assessment of biological risk. Based on the detailed analysis of the existing data, the present paper proposes a general approach.


  • Open Access

    Characterization of experimental complex fungal bioaerosols: Impact of analytical method on fungal composition measurements

    by Jodelle Degois, Xavier Simon, Cyril Bontemps, Pierre Leblond, Philippe Duquenne

    The microbial composition of bioaerosols is an important issue to investigate to better understand occupational risks linked to exposure to airborne particles. Traditional methods are based on culture followed by colony identification by morphological, molecular biology or biochemical approaches. We have carried out a preliminary study which aims were to generate reproducible complex bioaerosols and to compare a HTS approach to the traditional culture-based approach. Mixed fungal bioaerosols containing four fungal strains (Aspergillus niger, Cladosporium cladosporioides, Penicillium brevicompactum and Wallemia melicolla) were generated in the laboratory using a bubbling aerosolizer. The fungal composition was assessed by culture and sequencing. Two genetic targets were sequenced and two assignment methods were compared. Wallemia was poorly detected by the culture-based approach, whereas Aspergillus was readily observed, in significant proportions, only by this method. The proportions in the liquid suspensions and in the bioaerosols generated were nearly identical. Sequencing of the ITS2 region provided results better reflecting the theoretical composition than 18S rDNA sequencing. The findings show that results of fungal composition investigations are strongly dependent on the analysis method used. Further studies will be required to assess the impact of these findings when considering biodiversity in complex and unknown environments.


  • Open Access

    On the Identification of Culturable Microorganisms for the Assessment of Biodiversity in Bioaerosols

    by Philippe Duquenne

    The Annals of Work Exposures and Health recently published two interesting studies combining the use of culture and molecular methods. The method involves the cultivation of bioaerosol samples on agar media and the pick-up of grown colonies 16S rRNA gene amplification, subsequent cloning, sequencing, and identification of bacterial isolates through the assignment against known gene databases. The aim of the present paper is to discuss the contribution of the proposed method in regards with the already proposed approaches used for identification of cultured bacteria. It details the new proposed method and discusses its contribution to the existing culture-based identification methods. Such methods include macroscopic and microscopic observations, miniature biochemical tests (API® trips, VITEK 2® etc.), chemical methods such as the Fatty Acid Methyl Ester (FAME) and the Matrix-assisted laser desorption/ionization time off light (MALDI-TOF) analysis as well polymerase chain reaction (PCR) followed by sequencing. The proposed method supplements the panel of existing biodiversity ones for cultivated bacteria, especially useful for infectious microorganisms, as well as culture-independent ones. As both culture-based and culture-independent methods could therefore be used for the characterization of the occupational environmental microbiome, further applications in other occupational environments as well as additional comparisons with both culture-based and culture-independent methods would complete its characterization.


  • First Metagenomic Survey of the Microbial Diversity in Bioaerosols Emitted in Waste Sorting Plants

    by Jodelle Degois, Frederic Clerc, Xavier Simon, Cyril Bontemps, Pierre Leblond, Philippe Duquenne

    Waste sorting activities are source of occupational bioaerosol exposures that are associated with several health disorders. New analytical tools, based on next-generation sequencing (NGS) technologies, provide powerful methods to assess the microbial composition of bioaerosols. The objectives of the study were (i) to assess the feasibility and the repeatability of NGS-based biodiversity measurements and (ii) to study the microbial biodiversity using NGS in bioaerosols emitted in a waste sorting plant (WSP). Three stationary parallel samples were collected in a sorting cabin using closed-face cassettes equipped with polycarbonate membranes. Bacterial and fungal diversity was assessed by sequencing 16S and 18S rDNA genes using either Illumina sequencing or 454 pyrosequencing methods. At sampling point, airborne bacteria were dominated by Proteobacteria, Firmicutes, and Actinobacteria with prevailing genera assigned to unclassified Enterobacteriaceae, Staphylococcus, Acinetobacter, Leuconostoc, Pseudomonas, and Lactobacillus. Airborne fungi were dominated by Ascomycota with prevailing genera assigned to Penicillium, Aspergillus, Rhizopus, Wallemia, and Hemicarpenteles. The NGS biodiversity measurements revealed a higher biodiversity bioaerosols that previously reported for WSP in studies carried out using culture methods followed by identification of microorganisms. These results provide the first survey about taxonomic biodiversity in bioaerosols from WSPs using high-throughput sequencing.


  • Mesurage des endotoxines dans l’air. Valeurs guides proposées en l’absence de VLEP (valeur limite d’exposition professionnelle)

    by Christine David, Nicolas Bertrand, Isabelle Balty, Philippe Duquenne, Xavier Simon, Frederic Clerc, Sarah Burzoni, Veronique Caron, Brigitte Facon, Valerie Renevot

  • Endotoxin Deposits on the Inner Surfaces of Closed-Face Cassettes During Bioaerosol Sampling: A Field Investigation at Composting Facilities

    by Philippe Duquenne, Xavier Simon, Valérie Demange, Martin Harper, Pascal Wild

    A set of 270 bioaerosol samples was taken from 15 composting facilities using polystyrene closed-face filter cassettes (CFCs). The objective was to measure the quantity of endotoxin deposits on the inner surfaces of the cassettes (sometimes referred to as ‘wall deposits’). The results show that endotoxins are deposited on the inner surfaces of the CFCs through sampling and/or handling of samples. The quantity of endotoxins measured on inner surfaces range between 0.05 (the limit of detection of the method) and 3100 endotoxin units per cassette. The deposits can represent a large and variable percentage of the endotoxins sampled. More than a third of the samples presented a percentage of inner surface deposits >40% of the total quantity of endotoxins collected (filter + inner surfaces). Omitting these inner surface deposits in the analytical process lead to measurement errors relative to sampling all particles entering the CFC sampler, corresponding to a developing consensus on matching the inhalable particulate sampling convention. The result would be underestimated exposures and could affect the decision as to whether or not a result is acceptable in comparison to airborne concentration limits defined in terms of the inhalability convention. The results of this study suggest including the endotoxins deposited on the inner surfaces of CFCs during analysis. Further researches are necessary to investigate endotoxin deposits on the inner cassette surfaces in other working sectors.