Morteza Oshagh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Morteza Oshagh has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Shoaleh Shahidi
Biomaterial Research Center, Department of Oral and Maxillofacial Radiology, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
4 shared publications - Faezeh Ghaderi
Department of Pediatric Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
2 shared publications Hamid Reza Pakshir
2 shared publications- Hooman Zarif Najafi
Orthodontic Research Center, Department of Orthodontics, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
2 shared publications Mehdi Roeinpeikar
2 shared publications- Parisa Salehi
Orthodontic Research Center, Orthodontics Department, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran.
2 shared publications
Latest Publications
- 10 January 2018
- Published by Editora Napoleao Ltda ME in THE INTERNATIONAL JOURNAL OF ESTHETIC DENTISTRY
- Vol. 3 (1) , 34
Os efeitos das posições da testa e do pescoço na estética do perfil
- 10 January 2018
- Published by Editora Napoleao Ltda ME in THE INTERNATIONAL JOURNAL OF ESTHETIC DENTISTRY
- Vol. 3 (1) , 34
Os efeitos das posições da testa e do pescoço na estética do perfil
- Open Access
- 14 October 2015
- Published by Springer Nature in Progress in Orthodontics
- Vol. 16 (1) , 1-9
Comparison of the effects of preemptive acetaminophen, ibuprofen, and meloxicam on pain after separator placement: a randomized clinical trial
This study aims to evaluate and compare the effect of pre-procedural administration of acetaminophen, ibuprofen, and meloxicam in reducing pain after separator placement. Three hundred twenty-one patients who needed orthodontic treatment and aged above 15 were randomly assigned to one of the three study groups: group A: 650 mg acetaminophen, group B: 400 mg ibuprofen, and group C: 7.5 mg meloxicam. All subjects received a single dose of medication 1 h prior to separator placement. Using visual analog scale, patients recorded their pain perception during rest, fitting posterior teeth together, and chewing at time intervals of immediately, 2, 6, 24, and 48 h after separator placement. There was no significant difference between acetaminophen, ibuprofen, and meloxicam in post-separator placement pain control when administered 1 h before the procedure. In all the groups, at rest, pain level elevated after separator placement and reached its peak at 24 h and then subsided until 48 h. But during chewing and fitting of the posterior teeth, some of the groups reached a peak in pain at 48 h. No significant difference was found in pain experience between males and females. Meloxicam can be used as an effective analgesic in orthodontic pain control considering it has less gastric side effects compared to the conventional nonsteroidal anti-inflammatory drugs. Iranian Registry of Clinical Trials, IRCT2015041821828N1
- 14 October 2015
- Published by Springer Nature in Progress in Orthodontics
- Vol. 16 (1) , 1-9
Open AccessComparison of the effects of preemptive acetaminophen, ibuprofen, and meloxicam on pain after separator placement: a randomized clinical trial
This study aims to evaluate and compare the effect of pre-procedural administration of acetaminophen, ibuprofen, and meloxicam in reducing pain after separator placement. Three hundred twenty-one patients who needed orthodontic treatment and aged above 15 were randomly assigned to one of the three study groups: group A: 650 mg acetaminophen, group B: 400 mg ibuprofen, and group C: 7.5 mg meloxicam. All subjects received a single dose of medication 1 h prior to separator placement. Using visual analog scale, patients recorded their pain perception during rest, fitting posterior teeth together, and chewing at time intervals of immediately, 2, 6, 24, and 48 h after separator placement. There was no significant difference between acetaminophen, ibuprofen, and meloxicam in post-separator placement pain control when administered 1 h before the procedure. In all the groups, at rest, pain level elevated after separator placement and reached its peak at 24 h and then subsided until 48 h. But during chewing and fitting of the posterior teeth, some of the groups reached a peak in pain at 48 h. No significant difference was found in pain experience between males and females. Meloxicam can be used as an effective analgesic in orthodontic pain control considering it has less gastric side effects compared to the conventional nonsteroidal anti-inflammatory drugs. Iranian Registry of Clinical Trials, IRCT2015041821828N1
- 1 December 2014
- Published by SAGE Publications in Photomedicine and Laser Surgery
- Vol. 32 (12) , 694-699
Evaluation of the Effect of Four Surface Conditioning Methods on the Shear Bond Strength of Metal Bracket to Porcelain Surface
Objective: This study evaluated the effect of superpulse CO 2 laser irradiation and deglazing of porcelain surfaces on the shear bond strength (SBS) of metal orthodontic brackets, and compared it with two conventional etching techniques. Methods: Forty-eight Feldspathic porcelain fused to metal specimens embedded in cylindrical acrylic resin tubes were fabricated, and all the specimens were divided into four groups. In Group 1, the specimens were roughened with a diamond bur and etched with hydrofluoric acid (HFA) gel for 4 min. In Group 2, the specimens were roughened with a bur and irradiated by a CO 2 laser with a 2 W power setting for 20 sec. In Group 3, the specimens were only irradiated by a CO 2 laser. In Group 4, the porcelain surface was sandblasted with 50 μm aluminum oxide. Before bonding, the bracket silane was applied on the porcelain surfaces. SBS was evaluated by a Universal testing machine (Zwickroll, Germany). The remaining adhesive after the bond failure was evaluated using an adhesive remnant index (ARI). Statistical analysis was conducted by analysis of variance (ANOVA), Tukey, and Kruskal–Wallis tests. Results: ANOVA revealed significant differences in SBS among the four groups ( p p =0.016). Group 1 displayed the highest ARI scores among the groups. Conclusions: Deglazing combined with HFA etching produced the highest bond strength, but CO 2 laser irradiation provided adequate bond strength and allowed for elimination of the HFA step. Deglazing is not recommended as a preliminary step before CO 2 laser conditioning.
- 1 December 2014
- Published by SAGE Publications in Photomedicine and Laser Surgery
- Vol. 32 (12) , 694-699
Evaluation of the Effect of Four Surface Conditioning Methods on the Shear Bond Strength of Metal Bracket to Porcelain Surface
Objective: This study evaluated the effect of superpulse CO 2 laser irradiation and deglazing of porcelain surfaces on the shear bond strength (SBS) of metal orthodontic brackets, and compared it with two conventional etching techniques. Methods: Forty-eight Feldspathic porcelain fused to metal specimens embedded in cylindrical acrylic resin tubes were fabricated, and all the specimens were divided into four groups. In Group 1, the specimens were roughened with a diamond bur and etched with hydrofluoric acid (HFA) gel for 4 min. In Group 2, the specimens were roughened with a bur and irradiated by a CO 2 laser with a 2 W power setting for 20 sec. In Group 3, the specimens were only irradiated by a CO 2 laser. In Group 4, the porcelain surface was sandblasted with 50 μm aluminum oxide. Before bonding, the bracket silane was applied on the porcelain surfaces. SBS was evaluated by a Universal testing machine (Zwickroll, Germany). The remaining adhesive after the bond failure was evaluated using an adhesive remnant index (ARI). Statistical analysis was conducted by analysis of variance (ANOVA), Tukey, and Kruskal–Wallis tests. Results: ANOVA revealed significant differences in SBS among the four groups ( p p =0.016). Group 1 displayed the highest ARI scores among the groups. Conclusions: Deglazing combined with HFA etching produced the highest bond strength, but CO 2 laser irradiation provided adequate bond strength and allowed for elimination of the HFA step. Deglazing is not recommended as a preliminary step before CO 2 laser conditioning.
- Open Access
- 16 September 2014
- Published by Springer Nature in BMC Medical Imaging
- Vol. 14 (1) , 32
The accuracy of a designed software for automated localization of craniofacial landmarks on CBCT images
Two-dimensional projection radiographs have been traditionally considered the modality of choice for cephalometric analysis. To overcome the shortcomings of two-dimensional images, three-dimensional computed tomography (CT) has been used to evaluate craniofacial structures. However, manual landmark detection depends on medical expertise, and the process is time-consuming. The present study was designed to produce software capable of automated localization of craniofacial landmarks on cone beam (CB) CT images based on image registration and to evaluate its accuracy.
- 16 September 2014
- Published by Springer Nature in BMC Medical Imaging
- Vol. 14 (1) , 32
Open AccessThe accuracy of a designed software for automated localization of craniofacial landmarks on CBCT images
Two-dimensional projection radiographs have been traditionally considered the modality of choice for cephalometric analysis. To overcome the shortcomings of two-dimensional images, three-dimensional computed tomography (CT) has been used to evaluate craniofacial structures. However, manual landmark detection depends on medical expertise, and the process is time-consuming. The present study was designed to produce software capable of automated localization of craniofacial landmarks on cone beam (CB) CT images based on image registration and to evaluate its accuracy.
- Open Access
- 1 September 2014
- Vol. 11 (5) , 574-578
A comparative study of treatment outcomes between begg and edgewise orthodontic systems in class I cases
The purpose of this study was to compare the occlusal peer assessment rating (PAR) index in Class I patients treated by means of Begg and Edgewise methods. The pre- and post-treatment study models of Class I patients, referred to two private clinics, treated with Begg method (n = 30) and standard Edgewise method (n = 30), were reviewed retrospectively using PAR index including dental displacements, buccal occlusion (anteroposterior, vertical and transverse), overjet, overbite and midline parameters. The changes in PAR indices were analyzed using paired t-test. A P < 0.05 was considered as statistically significant. There was no significant difference in sex and age distribution between the two groups. The improvement of buccal occlusion in patients treated by Begg method (1.51 ± 0.39) was significantly higher than that of patients treated by Edgewise method (0.28 ± 0.39). The duration of treatment in Begg method (17.8 ± 1.3 months) was significantly shorter than that of Edgewise method (23.7 ± 1.3 months). However, there were no significant differences between the two methods in terms of total PAR index, dental displacements, overjet, overbite and midline. In conclusion, findings of the present study indicated that Begg method might be associated with better improvement of buccal occlusion and shorter duration of treatment
- 1 September 2014
- Vol. 11 (5) , 574-578
Open AccessA comparative study of treatment outcomes between begg and edgewise orthodontic systems in class I cases
The purpose of this study was to compare the occlusal peer assessment rating (PAR) index in Class I patients treated by means of Begg and Edgewise methods. The pre- and post-treatment study models of Class I patients, referred to two private clinics, treated with Begg method (n = 30) and standard Edgewise method (n = 30), were reviewed retrospectively using PAR index including dental displacements, buccal occlusion (anteroposterior, vertical and transverse), overjet, overbite and midline parameters. The changes in PAR indices were analyzed using paired t-test. A P < 0.05 was considered as statistically significant. There was no significant difference in sex and age distribution between the two groups. The improvement of buccal occlusion in patients treated by Begg method (1.51 ± 0.39) was significantly higher than that of patients treated by Edgewise method (0.28 ± 0.39). The duration of treatment in Begg method (17.8 ± 1.3 months) was significantly shorter than that of Edgewise method (23.7 ± 1.3 months). However, there were no significant differences between the two methods in terms of total PAR index, dental displacements, overjet, overbite and midline. In conclusion, findings of the present study indicated that Begg method might be associated with better improvement of buccal occlusion and shorter duration of treatment
- Open Access
- 27 August 2014
- Published by Springer Nature in Progress in Orthodontics
- Vol. 15 (1) , 1-7
Clinical and radiographic comparison of the effects of two types of fixed retainers on periodontium - A randomized clinical trial
Most orthodontists believe that fixed retainers are necessary to maintain ideal dental relationships. However, untoward side effects might result from their long-term placement. The aim of this study was to evaluate the clinical and radiographic effect of two commonly used fixed retainers on the health of the periodontium. Thirty patients were randomly divided into two groups to receive either a fiber-reinforced composite retainer or a spiral wire retainer extended on the lingual surfaces of both maxillary and mandibular arches from canine to canine. Periapical radiographs were obtained from the patients at the time of placement of the retainers and after the 6-month period to assess the radiographic conditions of the periodontium. Clinical examination was carried out at the same two time intervals. Even though there were no significant differences between the two groups of study at the beginning of the trial, there were statistically significant differences after the 6-month follow-up regarding the main outcomes of the study. Nearly all indices showed to deteriorate after 6 months in the fiber-reinforced group, while in the spiral wire group, this was not the case. As for the secondary outcomes, radiographic examination did not reveal any statistically significant differences after 6 months or between the two groups. It can be concluded that spiral wire retainers elicit less detrimental periodontal response in the short-term follow-up compared to fiber-reinforced composite retainers as revealed by the primary outcomes of the study. ClinicalTrials.gov: NCT01314729
- 27 August 2014
- Published by Springer Nature in Progress in Orthodontics
- Vol. 15 (1) , 1-7
Open AccessClinical and radiographic comparison of the effects of two types of fixed retainers on periodontium - A randomized clinical trial
Most orthodontists believe that fixed retainers are necessary to maintain ideal dental relationships. However, untoward side effects might result from their long-term placement. The aim of this study was to evaluate the clinical and radiographic effect of two commonly used fixed retainers on the health of the periodontium. Thirty patients were randomly divided into two groups to receive either a fiber-reinforced composite retainer or a spiral wire retainer extended on the lingual surfaces of both maxillary and mandibular arches from canine to canine. Periapical radiographs were obtained from the patients at the time of placement of the retainers and after the 6-month period to assess the radiographic conditions of the periodontium. Clinical examination was carried out at the same two time intervals. Even though there were no significant differences between the two groups of study at the beginning of the trial, there were statistically significant differences after the 6-month follow-up regarding the main outcomes of the study. Nearly all indices showed to deteriorate after 6 months in the fiber-reinforced group, while in the spiral wire group, this was not the case. As for the secondary outcomes, radiographic examination did not reveal any statistically significant differences after 6 months or between the two groups. It can be concluded that spiral wire retainers elicit less detrimental periodontal response in the short-term follow-up compared to fiber-reinforced composite retainers as revealed by the primary outcomes of the study. ClinicalTrials.gov: NCT01314729
- 1 January 2014
- Vol. 9 (3) , 412-25
The effects of forehead and neck position on esthetics of class I, II and III profiles.
All parts of the face, other than jaw relationships, should be considered in orthodontic treatment planning. The role of forehead and neck in facial esthetics is well known; however, the majority of conventional facial analysis methods have not considered them. Neck and forehead may confer mutual effects on equilibrium and on esthetics of other facial components, and may change the overall convexity/concavity view of the profile. Therefore, the aim of this study was to assess the effect of anteroposterior position of the forehead and neck on the esthetics of skeletal class I, II and III jaw relationships using profile silhouettes. Class II and III jaw relationships were constructed on the silhouette of a class I normal profile by altering the mandibular position. Retruded, normal and protruded positions were also applied for the forehead and neck. Three hundred Iranian laypeople (150 men, 150 women) scored the esthetics of profile silhouettes from 1 to 7. Half of the participants were told to consider the profiles as a man, and the other half were told to consider them as a woman. Data were analyzed using non-parametric methods. Class I jaw relation was found to be the most beautiful profile followed by class II and III respectively. Esthetics of different positions of the neck and forehead were significantly different (P < 0.05). In subjects with a normal neck and forehead position, and those with a retruded neck, the best esthetic relationship was class I, and the worst was class III. For protruded foreheads, the best jaw relationship was class II for females and class I for males, and the worst was class III for both. In a retruded forehead position, the most preferred jaw relationship was class I, and the worst was class II. For profiles with a protruded neck, the best esthetics was found to be in class III jaw relationship, and the worst was in class II. There was a small difference in scoring for male and female profiles (P < 0.05); there were also small differences in scoring trends of men and women (P < 0.05). This study showed that the anteroposterior position of the forehead and neck affects the esthetics of jaw relationships in profile view. In laypeople's opinions, in a normal profile, the overall appearance is more important compared to the independent position of the neck and forehead; however, having jaw abnormalities, the neck plays an important independent role. The preferred jaw relation for profiles with each forehead or neck position was introduced.
- 1 January 2014
- Vol. 9 (3) , 412-25
The effects of forehead and neck position on esthetics of class I, II and III profiles.
All parts of the face, other than jaw relationships, should be considered in orthodontic treatment planning. The role of forehead and neck in facial esthetics is well known; however, the majority of conventional facial analysis methods have not considered them. Neck and forehead may confer mutual effects on equilibrium and on esthetics of other facial components, and may change the overall convexity/concavity view of the profile. Therefore, the aim of this study was to assess the effect of anteroposterior position of the forehead and neck on the esthetics of skeletal class I, II and III jaw relationships using profile silhouettes. Class II and III jaw relationships were constructed on the silhouette of a class I normal profile by altering the mandibular position. Retruded, normal and protruded positions were also applied for the forehead and neck. Three hundred Iranian laypeople (150 men, 150 women) scored the esthetics of profile silhouettes from 1 to 7. Half of the participants were told to consider the profiles as a man, and the other half were told to consider them as a woman. Data were analyzed using non-parametric methods. Class I jaw relation was found to be the most beautiful profile followed by class II and III respectively. Esthetics of different positions of the neck and forehead were significantly different (P < 0.05). In subjects with a normal neck and forehead position, and those with a retruded neck, the best esthetic relationship was class I, and the worst was class III. For protruded foreheads, the best jaw relationship was class II for females and class I for males, and the worst was class III for both. In a retruded forehead position, the most preferred jaw relationship was class I, and the worst was class II. For profiles with a protruded neck, the best esthetics was found to be in class III jaw relationship, and the worst was in class II. There was a small difference in scoring for male and female profiles (P < 0.05); there were also small differences in scoring trends of men and women (P < 0.05). This study showed that the anteroposterior position of the forehead and neck affects the esthetics of jaw relationships in profile view. In laypeople's opinions, in a normal profile, the overall appearance is more important compared to the independent position of the neck and forehead; however, having jaw abnormalities, the neck plays an important independent role. The preferred jaw relation for profiles with each forehead or neck position was introduced.
- 1 August 2013
- Published by SAGE Publications in Photomedicine and Laser Surgery
- Vol. 31 (8) , 360-364
Comparison of the Shear Bond Strength of Orthodontic Brackets in Bonding and Rebonding: Preparation with Laser Versus Conventional Acid Etch Technique
Objective: The purpose of this study was to compare the bond strength of orthodontic brackets using laser versus acid etching. Background data: Debonding of brackets is a common problem in orthodontic treatments. Materials and methods: Eighty extracted premolar teeth were divided into two groups. The enamel of the teeth in group A and B were etched using CO 2 laser and phosphoric acid, respectively. The brackets were bonded to the teeth using Transbond XT and then debonded from the teeth by Instron machine. The remaining composite on the tooth surface was removed by a tungsten carbide polishing bur. Both groups were divided into two subgroups (A 1 , A 2 and B 1 , B 2 ). The teeth were prepared again with laser in A 1 , B 1 subgroups and with acid in A 2 , B 2 subgroups. At each stage, the shear bond strength and residual adhesive index were measured. One way ANOVA and χ 2 tests were used to analyze data. Results: The mean shear bond strength was significantly lower in group A and higher in group B compared with all other groups ( p< 0.05). Most of the bond failures were degree 0 and 1 in groups A, A 1 , and B 1 , and degree 2 and 3 in groups B, A 2 , and B 2 . Conclusions: Primary preparation with acid has a higher bond strength value than does CO 2 laser. Less adhesive residue remained on enamel after tooth preparation with laser following debonding. Secondary preparation of the enamel using laser has higher bond strength value than does primary preparation with laser, which can rationalize use of laser in rebonding of brackets.
- 1 August 2013
- Published by SAGE Publications in Photomedicine and Laser Surgery
- Vol. 31 (8) , 360-364
Comparison of the Shear Bond Strength of Orthodontic Brackets in Bonding and Rebonding: Preparation with Laser Versus Conventional Acid Etch Technique
Objective: The purpose of this study was to compare the bond strength of orthodontic brackets using laser versus acid etching. Background data: Debonding of brackets is a common problem in orthodontic treatments. Materials and methods: Eighty extracted premolar teeth were divided into two groups. The enamel of the teeth in group A and B were etched using CO 2 laser and phosphoric acid, respectively. The brackets were bonded to the teeth using Transbond XT and then debonded from the teeth by Instron machine. The remaining composite on the tooth surface was removed by a tungsten carbide polishing bur. Both groups were divided into two subgroups (A 1 , A 2 and B 1 , B 2 ). The teeth were prepared again with laser in A 1 , B 1 subgroups and with acid in A 2 , B 2 subgroups. At each stage, the shear bond strength and residual adhesive index were measured. One way ANOVA and χ 2 tests were used to analyze data. Results: The mean shear bond strength was significantly lower in group A and higher in group B compared with all other groups ( p< 0.05). Most of the bond failures were degree 0 and 1 in groups A, A 1 , and B 1 , and degree 2 and 3 in groups B, A 2 , and B 2 . Conclusions: Primary preparation with acid has a higher bond strength value than does CO 2 laser. Less adhesive residue remained on enamel after tooth preparation with laser following debonding. Secondary preparation of the enamel using laser has higher bond strength value than does primary preparation with laser, which can rationalize use of laser in rebonding of brackets.
- Open Access
- 1 March 2013
- Vol. 14 (1) , 6-12
Awareness of Iranian’s General Dentists Regarding the Latest Prophylaxis Guideline for Prevention of Infective Endocarditis
Statement of Problem : Dental procedures leading to oral tissue injuries may provoke bacterial release to the blood stream causing infective endocarditis (IE) in vulnerable patients. The guideline which was proposed by AHA has been updated 9 times having the last update published in 2007. This study was endeavored to uncover the level of knowledge of general dental practitioners in Shiraz, concerning the 2007 AHA guidelines for endocarditis prophylaxis in patients with cardiac problems receiving dental treatments.
- 1 March 2013
- Vol. 14 (1) , 6-12
Open AccessAwareness of Iranian’s General Dentists Regarding the Latest Prophylaxis Guideline for Prevention of Infective Endocarditis
Statement of Problem : Dental procedures leading to oral tissue injuries may provoke bacterial release to the blood stream causing infective endocarditis (IE) in vulnerable patients. The guideline which was proposed by AHA has been updated 9 times having the last update published in 2007. This study was endeavored to uncover the level of knowledge of general dental practitioners in Shiraz, concerning the 2007 AHA guidelines for endocarditis prophylaxis in patients with cardiac problems receiving dental treatments.
- 1 January 2013
- Published by Oxford University Press (OUP) in Dentomaxillofacial Radiology
- Vol. 42 (1) , 20110187
Accuracy of computerized automatic identification of cephalometric landmarks by a designed software
The purpose of this study was to design software for localization of cephalometric landmarks and to evaluate its accuracy in finding landmarks. 40 digital cephalometric radiographs were randomly selected. 16 landmarks which were important in most cephalometric analyses were chosen to be identified. Three expert orthodontists manually identified landmarks twice. The mean of two measurements of each landmark was defined as the baseline landmark. The computer was then able to compare the automatic system's estimate of a landmark with the baseline landmark. The software was designed using Delphi and Matlab programming languages. The techniques were template matching, edge enhancement and some accessory techniques. The total mean error between manually identified and automatically identified landmarks was 2.59 mm. 12.5% of landmarks had mean errors less than 1 mm. 43.75% of landmarks had mean errors less than 2 mm. The mean errors of all landmarks except the anterior nasal spine were less than 4 mm. This software had significant accuracy for localization of cephalometric landmarks and could be used in future applications. It seems that the accuracy obtained with the software which was developed in this study is better than previous automated systems that have used model-based and knowledge-based approaches.
- 1 January 2013
- Published by Oxford University Press (OUP) in Dentomaxillofacial Radiology
- Vol. 42 (1) , 20110187
Accuracy of computerized automatic identification of cephalometric landmarks by a designed software
The purpose of this study was to design software for localization of cephalometric landmarks and to evaluate its accuracy in finding landmarks. 40 digital cephalometric radiographs were randomly selected. 16 landmarks which were important in most cephalometric analyses were chosen to be identified. Three expert orthodontists manually identified landmarks twice. The mean of two measurements of each landmark was defined as the baseline landmark. The computer was then able to compare the automatic system's estimate of a landmark with the baseline landmark. The software was designed using Delphi and Matlab programming languages. The techniques were template matching, edge enhancement and some accessory techniques. The total mean error between manually identified and automatically identified landmarks was 2.59 mm. 12.5% of landmarks had mean errors less than 1 mm. 43.75% of landmarks had mean errors less than 2 mm. The mean errors of all landmarks except the anterior nasal spine were less than 4 mm. This software had significant accuracy for localization of cephalometric landmarks and could be used in future applications. It seems that the accuracy obtained with the software which was developed in this study is better than previous automated systems that have used model-based and knowledge-based approaches.