Alberto Bemporad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Alberto Bemporad has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Alessandro Alessio
Dip. Ingegneria dell’Informazione, Universita di Siena, Via Roma 56, 53100 Siena, Italy
4 shared publications - Ilya Kolmanovsky
Powertrain Control Research and Advanced Engineering, Ford Motor Company, Dearborn, Michigan, USA
4 shared publications - Stefano Di Cairano
Dipartimento di Ingegneria dell'Informazione, Università di Siena, Italy
4 shared publications - Davor Hrovat
Research and Innovation Center
3 shared publications - Stefano Di Cairano
Mitsubishi Electric Research Laboratories (MERL)
3 shared publications - Mircea Lazar
Eindhoven University of Technology
2 shared publications
Latest Publications
- 1 January 2011
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 44 (1) , 5712-5717
Stability and Invariance Analysis of Approximate Explicit MPC based on PWA Lyapunov Functions
- 1 January 2011
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 44 (1) , 5712-5717
Stability and Invariance Analysis of Approximate Explicit MPC based on PWA Lyapunov Functions
- 12 January 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 55 (2) , 498-502
Equivalent Piecewise Affine Models of Linear Hybrid Automata
In this technical note we examine the relationship between linear hybrid automata (LHA) and piecewise affine (PWA) systems. While a LHA is an autonomous non-deterministic model, a PWA is a deterministic model with inputs. Through the key idea of modeling the uncertainty associated with LHA transitions as input disturbances in a PWA model, by extending continuous-time PWA models to include the dynamics of discrete states and resets we show in a constructive way that a LHA can be equivalently represented as a PWA system, where equivalent means that the two systems generate the same trajectories. Besides filling in a missing theoretical link between the LHA modelling framework and the PWA modelling framework, the result has the practical advantage of enabling the use of several existing control theoretical tools developed for PWA models to a wider class of hybrid systems.
- 12 January 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 55 (2) , 498-502
Equivalent Piecewise Affine Models of Linear Hybrid Automata
In this technical note we examine the relationship between linear hybrid automata (LHA) and piecewise affine (PWA) systems. While a LHA is an autonomous non-deterministic model, a PWA is a deterministic model with inputs. Through the key idea of modeling the uncertainty associated with LHA transitions as input disturbances in a PWA model, by extending continuous-time PWA models to include the dynamics of discrete states and resets we show in a constructive way that a LHA can be equivalently represented as a PWA system, where equivalent means that the two systems generate the same trajectories. Besides filling in a missing theoretical link between the LHA modelling framework and the PWA modelling framework, the result has the practical advantage of enabling the use of several existing control theoretical tools developed for PWA models to a wider class of hybrid systems.
- 1 January 2010
- Published by Springer Nature
- p. 183-194
Model Predictive Powertrain Control: An Application to Idle Speed Regulation
- 1 January 2010
- Published by Springer Nature
- p. 183-194
Model Predictive Powertrain Control: An Application to Idle Speed Regulation
- 1 September 2009
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (20) , 204-209
Decentralized Model Predictive Control of Dynamically-Coupled Linear Systems: Tracking under Packet Loss
- 1 September 2009
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (20) , 204-209
Decentralized Model Predictive Control of Dynamically-Coupled Linear Systems: Tracking under Packet Loss
- 31 May 2009
- Published by Elsevier in Automatica
- Vol. 45 (5) , 1243-1251
Event-driven optimization-based control of hybrid systems with integral continuous-time dynamics
- 31 May 2009
- Published by Elsevier in Automatica
- Vol. 45 (5) , 1243-1251
Event-driven optimization-based control of hybrid systems with integral continuous-time dynamics
- 1 January 2009
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (14) , 90-95
Model predictive control for automotive time-delay processes: An application to air-to-fuel ratio control*
- 1 January 2009
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (14) , 90-95
Model predictive control for automotive time-delay processes: An application to air-to-fuel ratio control*
- 1 January 2009
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (17) , 14-19
Hierarchical and Hybrid Model Predictive Control of Quadcopter Air Vehicles
- 1 January 2009
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (17) , 14-19
Hierarchical and Hybrid Model Predictive Control of Quadcopter Air Vehicles
- 1 January 2008
- Published by Elsevier in European Journal of Control
- Vol. 14 (6)
Hybrid Model Predictive Control of a Solar Air Conditioning Plant
This paper describes the development and experimental validation of a multi-layer hybrid controller for optimizing energy management in a solar air conditioning plant. The hybrid nature of the process is due to its multi-mode structure: the refrigeration circuit can be fed by flat solar collectors, a storage system, by an auxiliary gas heater, or by a combination of them. The selection of the operating mode is obtained by switching electrovalves, pumps, and three-way mixing valves. The proposed multi-layer hybrid controller consists of a high-level supervisor that decides on-line the optimal operating mode through a hybrid model predictive control strategy, a static lower-level controller defining proper set-points for the chosen mode, and existing standard low-level controllers that ensure robust tracking of such set-points. The overall controller was designed in Matlab/Simulink using the Hybrid Toolbox, and then tested experimentally a real process, showing the effectiveness of the approach.
- 1 January 2008
- Published by Elsevier in European Journal of Control
- Vol. 14 (6)
Hybrid Model Predictive Control of a Solar Air Conditioning Plant
This paper describes the development and experimental validation of a multi-layer hybrid controller for optimizing energy management in a solar air conditioning plant. The hybrid nature of the process is due to its multi-mode structure: the refrigeration circuit can be fed by flat solar collectors, a storage system, by an auxiliary gas heater, or by a combination of them. The selection of the operating mode is obtained by switching electrovalves, pumps, and three-way mixing valves. The proposed multi-layer hybrid controller consists of a high-level supervisor that decides on-line the optimal operating mode through a hybrid model predictive control strategy, a static lower-level controller defining proper set-points for the chosen mode, and existing standard low-level controllers that ensure robust tracking of such set-points. The overall controller was designed in Matlab/Simulink using the Hybrid Toolbox, and then tested experimentally a real process, showing the effectiveness of the approach.
- 31 December 2007
- Published by Elsevier in Automatica
- Vol. 43 (12) , 2096-2103
Squaring the circle: An algorithm for generating polyhedral invariant sets from ellipsoidal ones
- 31 December 2007
- Published by Elsevier in Automatica
- Vol. 43 (12) , 2096-2103
Squaring the circle: An algorithm for generating polyhedral invariant sets from ellipsoidal ones
- 24 October 2007
- Published by Taylor & Francis in International Journal of Control
- Vol. 80 (11) , 1701-1716
Model predictive control of magnetically actuated mass spring dampers for automotive applications
Mechatronic systems such as those arising in automotive applications are characterized by significant non-linearities, tight performance specifications as well as by state and input constraints which need to be enforced during system operation. This paper takes a view that model predictive control (MPC) and hybrid models can be an attractive and systematic methodology to handle these challenging control problems, even when the underlying process is not hybrid. In addition, the piecewise affine (PWA) explicit form of MPC solutions avoids on-line optimization and can make this approach computationally viable even in situations with rather constrained computational resources. To illustrate the MPC design procedure and the underlying issues, we focus on a specific non-linear process example of a mass spring damper system actuated by an electromagnet. Such a system is one of the most common elements of mechatronic systems in automotive systems, with fuel injectors representing a concrete example. We first consider a linear MPC design for the mechanical part of the system. The approach accounts for all the constraints in the system but one, which is subsequently enforced via a state-dependent saturation element. Second, a hybrid MPC approach for the mechanical subsystem is analysed that can handle all the constraints by design and achieves better performance, at the price of a higher complexity of the controller. Finally, a hybrid MPC design that also takes into account the electrical dynamics of the system is considered.
- 24 October 2007
- Published by Taylor & Francis in International Journal of Control
- Vol. 80 (11) , 1701-1716
Model predictive control of magnetically actuated mass spring dampers for automotive applications
Mechatronic systems such as those arising in automotive applications are characterized by significant non-linearities, tight performance specifications as well as by state and input constraints which need to be enforced during system operation. This paper takes a view that model predictive control (MPC) and hybrid models can be an attractive and systematic methodology to handle these challenging control problems, even when the underlying process is not hybrid. In addition, the piecewise affine (PWA) explicit form of MPC solutions avoids on-line optimization and can make this approach computationally viable even in situations with rather constrained computational resources. To illustrate the MPC design procedure and the underlying issues, we focus on a specific non-linear process example of a mass spring damper system actuated by an electromagnet. Such a system is one of the most common elements of mechatronic systems in automotive systems, with fuel injectors representing a concrete example. We first consider a linear MPC design for the mechanical part of the system. The approach accounts for all the constraints in the system but one, which is subsequently enforced via a state-dependent saturation element. Second, a hybrid MPC approach for the mechanical subsystem is analysed that can handle all the constraints by design and achieves better performance, at the price of a higher complexity of the controller. Finally, a hybrid MPC design that also takes into account the electrical dynamics of the system is considered.