Chris R. M. Grovenor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chris R. M. Grovenor has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Jin Su
Department of Materials, Royal School of Mines, Imperial College London, London SW7 2AZ, UK
2 shared publications - Marco Siniscalchi
Department of Materials, University of Oxford, Oxford OX1 3PH, U.K.
2 shared publications - Mauro Pasta
Department of Materials, University of Oxford
2 shared publications - Robert S. Weatherup
Department of Materials, University of Oxford, Oxford, UK
2 shared publications Susannah C. Speller
Department of Materials, University of Oxford, Oxford, OX1 3PH, UK
2 shared publications- Susannah C. Speller
Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, United Kingdom
2 shared publications
Latest Publications
- Open Access
- 14 February 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (7) , 2431-2440
Initiation of dendritic failure of LLZTO via sub-surface lithium deposition
Mg is used as the tracer element in the Li plating electrode to confirm that pure Li metal can plate in isolated pores near the solid electrolyte surface. This results in an internal pressure buildup and in the spallation of the LLZTO solid electrolyte, initiating the dendritic process.
- 14 February 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (7) , 2431-2440
Open AccessInitiation of dendritic failure of LLZTO via sub-surface lithium deposition
Mg is used as the tracer element in the Li plating electrode to confirm that pure Li metal can plate in isolated pores near the solid electrolyte surface. This results in an internal pressure buildup and in the spallation of the LLZTO solid electrolyte, initiating the dendritic process.
- Open Access
- 26 January 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 16 (2) , 698
Correction: Interfacial modification between argyrodite-type solid-state electrolytes and Li metal anodes using LiPON interlayers
Correction for ‘Interfacial modification between argyrodite-type solid-state electrolytes and Li metal anodes using LiPON interlayers’ by Jin Su et al., Energy Environ. Sci., 2022, 15, 3805–3814, https://doi.org/10.1039/D2EE01390H.
- 26 January 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 16 (2) , 698
Open AccessCorrection: Interfacial modification between argyrodite-type solid-state electrolytes and Li metal anodes using LiPON interlayers
Correction for ‘Interfacial modification between argyrodite-type solid-state electrolytes and Li metal anodes using LiPON interlayers’ by Jin Su et al., Energy Environ. Sci., 2022, 15, 3805–3814, https://doi.org/10.1039/D2EE01390H.
- Open Access
- 27 September 2022
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 7 (10) , 3593-3599
On the Relative Importance of Li Bulk Diffusivity and Interface Morphology in Determining the Stripped Capacity of Metallic Anodes in Solid-State Batteries
Lithium metal self-diffusion is too slow to sustain large current densities at the interface with a solid electrolyte, and the resulting formation of voids on stripping is a major limiting factor for the power density of solid-state cells. The enhanced morphological stability of some lithium alloy electrodes has prompted questions on the role of lithium diffusivity in these materials. Here, the lithium diffusivity in Li-Mg alloys is investigated by an isotope tracer method, revealing that the presence of magnesium slows down the diffusion of lithium. For large stripping currents the delithiation process is diffusion-limited, hence a lithium metal electrode yields a larger capacity than a Li-Mg electrode. However, at lower currents we explain the apparent contradiction that more lithium can be extracted from Li-Mg electrodes by showing that the alloy can maintain a more geometrically stable diffusion path to the solid electrolyte surface so that the effective lithium diffusivity is improved.
- 27 September 2022
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 7 (10) , 3593-3599
Open AccessOn the Relative Importance of Li Bulk Diffusivity and Interface Morphology in Determining the Stripped Capacity of Metallic Anodes in Solid-State Batteries
Lithium metal self-diffusion is too slow to sustain large current densities at the interface with a solid electrolyte, and the resulting formation of voids on stripping is a major limiting factor for the power density of solid-state cells. The enhanced morphological stability of some lithium alloy electrodes has prompted questions on the role of lithium diffusivity in these materials. Here, the lithium diffusivity in Li-Mg alloys is investigated by an isotope tracer method, revealing that the presence of magnesium slows down the diffusion of lithium. For large stripping currents the delithiation process is diffusion-limited, hence a lithium metal electrode yields a larger capacity than a Li-Mg electrode. However, at lower currents we explain the apparent contradiction that more lithium can be extracted from Li-Mg electrodes by showing that the alloy can maintain a more geometrically stable diffusion path to the solid electrolyte surface so that the effective lithium diffusivity is improved.
- Open Access
- 3 August 2022
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 15 (9) , 3805-3814
Interfacial modification between argyrodite-type solid-state electrolytes and Li metal anodes using LiPON interlayers
Improved wetting behaviour of argyrodite Li 6 PS 5 Cl SSE by introducing a LiPON interlayer, and the corresponding FIB-SEM cross-section image. The thin LiPON interlayer helps the Li metal to contact conformally with the surface of Li 6 PS 5 Cl SSE.
- 3 August 2022
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 15 (9) , 3805-3814
Open AccessInterfacial modification between argyrodite-type solid-state electrolytes and Li metal anodes using LiPON interlayers
Improved wetting behaviour of argyrodite Li 6 PS 5 Cl SSE by introducing a LiPON interlayer, and the corresponding FIB-SEM cross-section image. The thin LiPON interlayer helps the Li metal to contact conformally with the surface of Li 6 PS 5 Cl SSE.
- 22 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (4) , 1-3
Development of Superconducting Soldered Joints Between Bi-2212/Ag Wires
Bi-2212/Ag superconducting wires are being considered as key conductor candidates for the development of high field magnets (up to 25 T), but it is recognised that a reliable joining process between these wires is a critical challenge for most high-field applications. This work focuses on the design and testing of jointing processes between multifila-mentary Bi-2212 wires to make persistent mode joints using soldering techniques. The ability of several different su-perconducting solder alloys from the PbBi and SnInBi sys-tems to remove and replace the Ag matrix in fully reacted Bi-2212 wires has been explored. The SnInBi lead-free sol-der was found to be relatively effective at removing the Ag matrix, but does not make good contact with the Bi-2212 filaments. PbBi solder wets the Bi-2212 filaments more ef-fectively, but is slower at removing the Ag matrix. There-fore, a two-stage process has been developed using molten Sn to first remove the Ag matrix followed by PbBi to re-place the non-superconducting Sn. Joints made using this two-stage process have higher critical currents (133 A in self-field and 4 K) than joints made using PbBi alone (120 A in self-field 4K).
- 22 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (4) , 1-3
Development of Superconducting Soldered Joints Between Bi-2212/Ag Wires
Bi-2212/Ag superconducting wires are being considered as key conductor candidates for the development of high field magnets (up to 25 T), but it is recognised that a reliable joining process between these wires is a critical challenge for most high-field applications. This work focuses on the design and testing of jointing processes between multifila-mentary Bi-2212 wires to make persistent mode joints using soldering techniques. The ability of several different su-perconducting solder alloys from the PbBi and SnInBi sys-tems to remove and replace the Ag matrix in fully reacted Bi-2212 wires has been explored. The SnInBi lead-free sol-der was found to be relatively effective at removing the Ag matrix, but does not make good contact with the Bi-2212 filaments. PbBi solder wets the Bi-2212 filaments more ef-fectively, but is slower at removing the Ag matrix. There-fore, a two-stage process has been developed using molten Sn to first remove the Ag matrix followed by PbBi to re-place the non-superconducting Sn. Joints made using this two-stage process have higher critical currents (133 A in self-field and 4 K) than joints made using PbBi alone (120 A in self-field 4K).
- 7 April 2012
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 13 (4)
Characterizing the microstructure of Arctica islandica shells using NanoSIMS and EBSD
The bivalve mollusc Arctica islandica has received considerable attention in recent years because of its potential as an archive of marine palaeoclimate, based on its annually resolved incremental shell growth, longevity, and synchronous growth within populations. The robust interpretation of the archive depends on a detailed understanding of the shell formation process, and this in turn requires a reliable understanding of the shell microstructure. Research into this aspect, however, has so far been relatively limited. This study uses secondary ion mass spectrometry (NanoSIMS) to examine the compositions of the two annually formed growth increments, i.e., a narrow band of relatively slow growth referred to as growth increment I (GI I) and a usually wider accretion called growth increment II (GI II). High resolution composition maps are presented which clearly show lower concentrations of the organic ions 12C14N− and 32S− in GI I relative to GI II. This is consistent with the growth of larger crystallites in GI I, which is clearly demonstrated using a novel analysis method involving focused ion beam (FIB) milling. Electron backscatter diffraction (EBSD) analysis is also presented, and demonstrates that the orientation of the aragonite c‐axis is the same in both GI I and GI II, and that the a‐ and b‐axes assume preferred orientations consistent with the known angle of twinning in aragonite. By analyzing individual crystallites it is deduced that the (001) plane is likely to be the mineralizing face in GI I, and that the (011) and (102) planes are low energy interfaces in GI II.
- 7 April 2012
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 13 (4)
Characterizing the microstructure of Arctica islandica shells using NanoSIMS and EBSD
The bivalve mollusc Arctica islandica has received considerable attention in recent years because of its potential as an archive of marine palaeoclimate, based on its annually resolved incremental shell growth, longevity, and synchronous growth within populations. The robust interpretation of the archive depends on a detailed understanding of the shell formation process, and this in turn requires a reliable understanding of the shell microstructure. Research into this aspect, however, has so far been relatively limited. This study uses secondary ion mass spectrometry (NanoSIMS) to examine the compositions of the two annually formed growth increments, i.e., a narrow band of relatively slow growth referred to as growth increment I (GI I) and a usually wider accretion called growth increment II (GI II). High resolution composition maps are presented which clearly show lower concentrations of the organic ions 12C14N− and 32S− in GI I relative to GI II. This is consistent with the growth of larger crystallites in GI I, which is clearly demonstrated using a novel analysis method involving focused ion beam (FIB) milling. Electron backscatter diffraction (EBSD) analysis is also presented, and demonstrates that the orientation of the aragonite c‐axis is the same in both GI I and GI II, and that the a‐ and b‐axes assume preferred orientations consistent with the known angle of twinning in aragonite. By analyzing individual crystallites it is deduced that the (001) plane is likely to be the mineralizing face in GI I, and that the (011) and (102) planes are low energy interfaces in GI II.
- 15 February 2012
- Published by Wiley in Surface and Interface Analysis
- Vol. 45 (1) , 305-308
Quantitative grain boundary analysis of bulk samples by SIMS
Solute grain boundary (GB) segregation is an important metallurgical phenomenon that has been extensively studied over the last 40 years, especially by Auger spectroscopy of fractured surfaces. More recently, it has been demonstrated that high‐resolution SIMS (NanoSIMS) analysis can detect solute GB segregation on a simple polished cross‐section. The aim of the work presented here was to demonstrate the use of SIMS to achieve quantitative analysis of GB segregation, including taking into account the inclination of the individual boundaries to the bulk sample surface. Copyright © 2012 John Wiley & Sons, Ltd.
- 15 February 2012
- Published by Wiley in Surface and Interface Analysis
- Vol. 45 (1) , 305-308
Quantitative grain boundary analysis of bulk samples by SIMS
Solute grain boundary (GB) segregation is an important metallurgical phenomenon that has been extensively studied over the last 40 years, especially by Auger spectroscopy of fractured surfaces. More recently, it has been demonstrated that high‐resolution SIMS (NanoSIMS) analysis can detect solute GB segregation on a simple polished cross‐section. The aim of the work presented here was to demonstrate the use of SIMS to achieve quantitative analysis of GB segregation, including taking into account the inclination of the individual boundaries to the bulk sample surface. Copyright © 2012 John Wiley & Sons, Ltd.
- 9 November 2011
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 326 (1) , 012031
Accuracy of pulsed laser atom probe tomography for compound semiconductor analysis
- 9 November 2011
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 326 (1) , 012031
Accuracy of pulsed laser atom probe tomography for compound semiconductor analysis
- 15 September 2010
- Published by Wiley in Journal of Microscopy
- Vol. 240 (1) , 21-31
Development of a new bimodal imaging methodology: a combination of fluorescence microscopy and high‐resolution secondary ion mass spectrometry
Summary: In this paper, we present a new experimental methodology to combine mass spectrometry (NanoSIMS) with fluorescence microscopy to provide subcellular information on the location of small molecules in cultured cells. We demonstrate this by comparing the distribution of 5‐bromo‐2‐deoxyuridine in the same cells given by both NanoSIMS analysis and by fluorescence immunohistochemistry. Fiducial markers in the substrates ensured that the images formed by SIMS mapping of bromine ions could be co‐registered exactly with images from fluorescence microscopy. The NanoSIMS was shown to faithfully reproduce the information from fluorescence microscopy, but at a much higher spatial resolution. We then show preliminary SIMS images on the distribution of ATN‐224, a therapeutic copper chelator for which there is no fluorescent marker, co‐registered with conventional Lysotracker and Hoechst stains on the same cells.
- 15 September 2010
- Published by Wiley in Journal of Microscopy
- Vol. 240 (1) , 21-31
Development of a new bimodal imaging methodology: a combination of fluorescence microscopy and high‐resolution secondary ion mass spectrometry
Summary: In this paper, we present a new experimental methodology to combine mass spectrometry (NanoSIMS) with fluorescence microscopy to provide subcellular information on the location of small molecules in cultured cells. We demonstrate this by comparing the distribution of 5‐bromo‐2‐deoxyuridine in the same cells given by both NanoSIMS analysis and by fluorescence immunohistochemistry. Fiducial markers in the substrates ensured that the images formed by SIMS mapping of bromine ions could be co‐registered exactly with images from fluorescence microscopy. The NanoSIMS was shown to faithfully reproduce the information from fluorescence microscopy, but at a much higher spatial resolution. We then show preliminary SIMS images on the distribution of ATN‐224, a therapeutic copper chelator for which there is no fluorescent marker, co‐registered with conventional Lysotracker and Hoechst stains on the same cells.
- 25 August 2010
- Published by Wiley in The Plant Journal
- Vol. 63 (5) , 870-879
High-resolution elemental localization in vacuolate plant cells by nanoscale secondary ion mass spectrometry
By combining the capabilities of advanced sample preparation methodologies with the latest generation of secondary ion mass spectrometry instrumentation, we show that chemical information on the distribution of even dilute species in biological samples can be obtained with spatial resolutions of better than 100 nm. Here, we show the distribution of nickel and other elements in leaf tissue of the nickel hyperaccumulator plant Alyssum lesbiacum prepared by high-pressure freezing and freeze substitution.
- 25 August 2010
- Published by Wiley in The Plant Journal
- Vol. 63 (5) , 870-879
High-resolution elemental localization in vacuolate plant cells by nanoscale secondary ion mass spectrometry
By combining the capabilities of advanced sample preparation methodologies with the latest generation of secondary ion mass spectrometry instrumentation, we show that chemical information on the distribution of even dilute species in biological samples can be obtained with spatial resolutions of better than 100 nm. Here, we show the distribution of nickel and other elements in leaf tissue of the nickel hyperaccumulator plant Alyssum lesbiacum prepared by high-pressure freezing and freeze substitution.