Development of Superconducting Soldered Joints Between Bi-2212/Ag Wires
- 22 March 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (4) , 1-3
Abstract
Bi-2212/Ag superconducting wires are being considered as key conductor candidates for the development of high field magnets (up to 25 T), but it is recognised that a reliable joining process between these wires is a critical challenge for most high-field applications. This work focuses on the design and testing of jointing processes between multifila-mentary Bi-2212 wires to make persistent mode joints using soldering techniques. The ability of several different su-perconducting solder alloys from the PbBi and SnInBi sys-tems to remove and replace the Ag matrix in fully reacted Bi-2212 wires has been explored. The SnInBi lead-free sol-der was found to be relatively effective at removing the Ag matrix, but does not make good contact with the Bi-2212 filaments. PbBi solder wets the Bi-2212 filaments more ef-fectively, but is slower at removing the Ag matrix. There-fore, a two-stage process has been developed using molten Sn to first remove the Ag matrix followed by PbBi to re-place the non-superconducting Sn. Joints made using this two-stage process have higher critical currents (133 A in self-field and 4 K) than joints made using PbBi alone (120 A in self-field 4K).Keywords
This publication has 7 references indexed in Scilit:
- Microstructure and superconducting properties of Sn–In and Sn–In–Bi alloys as Pb-free superconducting soldersSuperconductor Science and Technology, 2015
- Persistent current joints between technological superconductorsSuperconductor Science and Technology, 2015
- Joining of Bi-2212 high-Tc superconductors and metals using indium soldersPhysica C: Superconductivity and its Applications, 2007
- Improvement of the microstructure and critical current densities of Bi-2212 round wires with a precisely controlled heat treatmentSuperconductor Science and Technology, 2004
- Important Considerations for Processing Bi-Based High-Temperature Superconducting Tapes and Films for Bulk ApplicationsMRS Bulletin, 1992
- High-field critical current densities in Bi2Sr2Ca1Cu2O8+x/Ag wiresApplied Physics Letters, 1989
- Superconducting properties and the phase diagrams of the PbBi and PbIn alloy systemsJournal of Physics and Chemistry of Solids, 1970