PPPeter Pfeiffer

Peter Pfeiffer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Peter Pfeiffer has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Resistance Against Pull-out Force of Prefabricated Coated FRC Posts

    by Petra Schmage, Ibrahim Nergiz, Sotiria Markopoulou, Peter Pfeiffer

    To investigate the effect of a prefabricated tribochemical coating of FRC (fiber-reinforced composite) posts with and without aging on the pull-out forces compared to posts without conditioning. Post space preparations were performed on 108 extracted anterior teeth. Thirty-six uncoated FRC posts (DentinPost) and 72 prefabricated tribochemically coated FRC posts (DentinPost Coated) were used at a length of 12 mm. Thirty-six of the coated posts were thermally aged. FRC posts (n = 9) were placed using DentinBuild or MultiCore Flow foundation composite resins or Panavia F2.0 or RelyX Unicem resin cements. Following water storage (37°, 24 h) and thermocycling (5000 cycles, 5° to 55°C, 30 s), pull-out force testing was performed. Fracture modes were assessed using a light microscope. Data were analyzed statistically (1-way and 3-way ANOVA, Bonferroni-Dunn correction, α = 0.05). Significantly higher pull-out forces of posts luted with Panavia F2.0 were observed for the coated and coated/aged FRC posts compared to the unconditioned posts (control group, p < 0.001). The pull-out forces of tribochemically coated FRC posts luted with MultiCore Flow were significantly lower than of coated posts luted with Panavia F2.0 (p < 0.001). Coated/aged FRC posts exhibited similar pull-out forces for the tested luting composite resins (p > 0.05). Except for DentinBuild (coated posts), more mixed or cohesive fractures were assessed for coated and coated/aged FRC posts than for unconditioned FRC posts. Prefabricated tribochemical coating of FRC posts provided a stable interface between coating and post and remained stable over time.

    • 24 March 2012
      • Vol. 27  (2) , 308-17

    Effects of 10 cleaning instruments on four different implant surfaces.

    by Petra Schmage, Julia Thielemann, Ibrahim Nergiz, Thomas M Scorziello, Peter Pfeiffer

    The aim of this study was to evaluate the effects of a variety of implant cleaning instruments on different implant surfaces, specifically surface roughness and cleaning efficacy. Biofilm layers of Streptococcus mutans were cultivated on titanium disks with four different surface structures (polished, grit-blasted, acid-etched, and acid-etched/grit-blasted). Five disks each were cleaned using nine mechanical implant cleaning instruments or an erbium:yttrium-aluminum-garnet laser. Surface roughness (average, Ra; maximum, Rz) and waviness (Lr) were evaluated by two-dimensional laser profilometry. Surface structure damage and cleaning scores were assessed by scanning electron microscopy. Statistical analyses of the results were performed with one- and two-way analyses of variance and Bonferroni-Dunn multiple-comparison post hoc analysis (α = .05). Ra and Rz values for the acid-etched surfaces and Ra, Rz, and Lr values for the polished and the grit-blasted surfaces showed no significant differences between the different cleaning methods or cleaning instruments compared to the control (not cultured, not cleaned) groups. Significantly lower Ra and Rz values on grit-blasted/acid-etched implant surfaces were found following use of the Sonic-Flex clean with prophylaxis brush and the plastic curette compared to Satelec ProphyMax with Periosoft curette. Ra and Rz values of the different implant structure surfaces before cleaning were significantly different between all implant surfaces except for the polished compared to the acid-etched surfaces. Cleaning effect and alterations of the implant surfaces were strongly dependent on the implant cleaning method used.


    • 3 February 2012
      • Vol. 27  (1) , 55-63

    The effect of changes in head position on enlargement of structures during panoramic radiography.

    by Peter Pfeiffer, Sandra Bewersdorf, Petra Schmage

    Accuracy of panoramic radiographs is essential for distance measurements during implant planning, but it might be compromised by various factors. The aim of the present study was to evaluate the effect of vertical and horizontal head positioning on area-dependent enlargement ratios of digital panoramic radiography. The mandible of a dry skull was marked with small steel globes. The skull was moved 1 to 4 degrees in 1-degree increments to the left and right and up and down. A series of 17 panoramic radiographs was obtained with the same digital radiographic device. For the rotated skull, horizontal and vertical distances, indicated by the steel globes, were compared to the distances with the ideal positioning of the skull. The results were analyzed statistically. Head positioning and angulation, anatomical site, and distance orientation influenced horizontal measurements. Enlargement ratios of horizontal distances of the right canine and first molar regions (skull rotation to the right 2 to 4 degrees) were significantly lower than those for the corresponding anatomical sites on the left side. Horizontal distance measurements of the different anatomical sites of the left and the right jaw did not differ significantly from each other when the skull was moved downward. When the skull was rotated upward, no significant differences were obtained for corresponding anatomical sites of the right and left arches. Enlargement ratios of vertical distances of different anatomical sites, as well as within the same anatomical site, were not significantly different from each other for the given skull rotations. Ideal head positioning for digital panoramic radiographs is mandatory to avoid improper enlargement ratios of horizontal distances, which can be important in implant dentistry.


  • Gray Value Differences to Dentin of Root Posts Radiographed with Digital Intraoral Systems and Conventional X-ray Films

    by S. Wicht, P. Pfeiffer, U. Rother, I. Nergiz, P. Schmage

    Clinical Relevance: Digital radiographs often provide significantly higher gray value differences between root posts and root dentin than conventional x-ray films.


  • Yield strength of fiber-reinforced composite posts with coronal retention

    by Petra Schmage, Ibrahim Nergiz, Ursula Platzer, Peter Pfeiffer


  • Clinical Evaluation of Ceramic Inlays Compared to Composite Restorations

    by R. T. Lange, P. Pfeiffer

    Clinical Relevance: Evopress ceramic inlays and Filtek Z250 composite restorations showed no significant difference regarding survival probability at 57 months when used as Class I and II restoratives in premolars and molars. Both materials demonstrated acceptable clinical performance, with a preference for the ceramic inlays.


  • Influence of Oversized Dowel Space Preparation on the Bond Strengths of FRC Posts

    by P. Schmage, P. Pfeiffer, E. Pinto, U. Platzer, I. Nergiz

    SUMMARY: This study compared the bond strengths of fiber-reinforced composite (FRC) posts luted into oversized dowel spaces with FRC posts luted into precisely fitting dowel spaces using five different resin cements or build-up composites. The hypotheses examined were that bond strength does not present vast variations according to the width of the gap between the root canal and post and that bond strength increases for FRC posts luted with build-up composites compared with FRC posts luted with resin cements. Dowel space preparations (ER post-restoring system, 12 mm in length) were performed on 100 human anterior teeth up to ISO 90 and ISO 110 of 50 roots each. FRC posts, all ISO size 90, were inserted into the precisely fitting as well as into the oversized dowel spaces (n=10) using five composite materials (Calibra, Multicore Flow, Rely X Unicem; resin cements and Build-It, Rebilda DC; build-up composites). The manufacturers' instructions of the composite materials were strictly followed except for Rebilda DC, which was used with Adhese for dentin bonding. Following water storage (37°C, 24 hours) and thermocycling (5000 cycles, 5°C–55°C, 30 seconds) tensile strength testing was performed and fracture modes were assessed using SEM. Data were analyzed statistically (one-way and two-way ANOVA, Bonferroni/Dunn correction, αp<0.011). Yet, the bond strengths of RelyX Unicem (454 N ± 64 N), Build-It (422 N ± 43 N) and Calibra (408 N ± 50 N) showed significantly higher values for the precisely fitting posts than Rebilda DC (267 N ± 54 N). RelyX Unicem revealed significantly higher values than Multicore Flow (296 N ± 73 N). The bond strengths of FRC posts in oversized dowel spaces varied from 301 N ± 78 N for Build-It to 152 N ± 37 N for Calibra. The values of Build-It were significantly higher compared with Calibra, Multicore Flow (180 N ± 47 N) and Rebilda DC (186 N ± 52 N), as well as those of RelyX Unicem (256 N ± 115 N) were significantly higher than Calibra. Fracture modes were shown to be mainly adhesive at the post surface or cohesive for precisely fitting posts and to occur between post and composite except for RelyX Unicem with cohesive fractures for the oversized dowel spaces. The build-up composite Build-It showed superior bond strengths in oversized canals, which were still not as high as those of posts in precisely fitting dowel spaces using common resin cements.