Mehmet Yumurtaci
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mehmet Yumurtaci has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- İsMail Yabanova
Department of Electrical Engineering, Manisa Celal Bayar University 3 , Manisa
8 shared publications - Semih Ergin
Department of Electrical and Electronics Engineering Eskisehir Osmangazi University Eskisehir Türkiye
3 shared publications - Zekeriya Balci
Van Yüzüncü Yıl University
3 shared publications - Tarık Ünler
Necmettin Erbakan Universitesi
2 shared publications - Özgür Verim
Afyon Kocatepe Universitesi
2 shared publications - Gulin Elibol Secil
Department of Electrical and Electronics Engineering Eskisehir Osmangazi University Eskisehir Türkiye
1 shared publication
Latest Publications
- Open Access
- 12 October 2026
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 32 (4) , 953-966
Dynamic Weighing Signal Denoising Approach Based on Convolutional Denoising Autoencoders: A Novel Rapid Weight Determination for Egg Sorting Machines
With the increasing scale of industrial egg production, rapid and precise weight classification has become a technical necessity. While dynamic weighing systems are employed to maintain high production speeds, load cell signals in these systems are significantly corrupted by mechanical vibrations and environmental noise, compromising measurement accuracy. This study proposes a Convolutional Denoising Autoencoder (CDAE)-based approach to effectively filter these dynamic weighing signals and ensure accurate classification. The performance of the proposed method was evaluated and compared against traditional filtering techniques, specifically Discrete Wavelet Transform (DWT) and Moving Average Filter (MAF). The results demonstrate that the CDAE-based model provides superior noise reduction, enabling faster and more stable weight determination compared to conventional methods. By addressing the limitations of traditional filters in high-speed environments, this study offers a robust artificial intelligence-based solution to the precision dynamic weighing challenges encountered in the food industry.
- 12 October 2026
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 32 (4) , 953-966
Open AccessDynamic Weighing Signal Denoising Approach Based on Convolutional Denoising Autoencoders: A Novel Rapid Weight Determination for Egg Sorting Machines
With the increasing scale of industrial egg production, rapid and precise weight classification has become a technical necessity. While dynamic weighing systems are employed to maintain high production speeds, load cell signals in these systems are significantly corrupted by mechanical vibrations and environmental noise, compromising measurement accuracy. This study proposes a Convolutional Denoising Autoencoder (CDAE)-based approach to effectively filter these dynamic weighing signals and ensure accurate classification. The performance of the proposed method was evaluated and compared against traditional filtering techniques, specifically Discrete Wavelet Transform (DWT) and Moving Average Filter (MAF). The results demonstrate that the CDAE-based model provides superior noise reduction, enabling faster and more stable weight determination compared to conventional methods. By addressing the limitations of traditional filters in high-speed environments, this study offers a robust artificial intelligence-based solution to the precision dynamic weighing challenges encountered in the food industry.
- Open Access
- 29 July 2025
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 31 (3) , 802-813
Design of a Dynamic Weighing System and AI-Based Sorting Process for Egg Sorting Machines
Eggs are one of the world's most significant food sources since they include numerous critical nutrients such as protein, vitamins, minerals, and omega-3 fatty acids. Egg production and consumption have expanded dramatically in the previous two decades because of population growth and industrialization. To fulfill rising demand, automating of egg production facilities has become necessary. To distribute eggs to consumers and maintain quality requirements, eggs must be divided into weight categories. Due to production capacity, this process must be carried out using machines. High production volumes necessitate a rapid weighing process; hence eggs are weighed dynamically in machines. The weighing signal obtained from the load cell is filtered to determine the stable weight, which is then used to calculate the egg's weight class. In this paper, instead of performing all of these processes using classical approaches, a Stacked Autoencoder (SAE) based classification system is developed that will predict the egg's class using only raw weight data. To assess the effectiveness of the suggested method, classification performance was compared using support vector machines (SVM), knearest neighbors (kNN), and decision trees (DT). The suggested approach determines the weight class of the egg in roughly 0.084 sec with 100% accuracy. Given the increasing egg demand, the proposed technology allows for a considerably faster egg categorization procedure, boosting production speed and lowering production costs.
- 29 July 2025
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 31 (3) , 802-813
Open AccessDesign of a Dynamic Weighing System and AI-Based Sorting Process for Egg Sorting Machines
Eggs are one of the world's most significant food sources since they include numerous critical nutrients such as protein, vitamins, minerals, and omega-3 fatty acids. Egg production and consumption have expanded dramatically in the previous two decades because of population growth and industrialization. To fulfill rising demand, automating of egg production facilities has become necessary. To distribute eggs to consumers and maintain quality requirements, eggs must be divided into weight categories. Due to production capacity, this process must be carried out using machines. High production volumes necessitate a rapid weighing process; hence eggs are weighed dynamically in machines. The weighing signal obtained from the load cell is filtered to determine the stable weight, which is then used to calculate the egg's weight class. In this paper, instead of performing all of these processes using classical approaches, a Stacked Autoencoder (SAE) based classification system is developed that will predict the egg's class using only raw weight data. To assess the effectiveness of the suggested method, classification performance was compared using support vector machines (SVM), knearest neighbors (kNN), and decision trees (DT). The suggested approach determines the weight class of the egg in roughly 0.084 sec with 100% accuracy. Given the increasing egg demand, the proposed technology allows for a considerably faster egg categorization procedure, boosting production speed and lowering production costs.
- 7 November 2024
- Published by Wiley in Journal of Food Process Engineering
- Vol. 47 (11)
Autoencoder‐Based Eggshell Crack Detection Using Acoustic Signal
Breaks or cracks in eggshells offer substantial food safety issues. Bacteria and viruses, in particular, are more likely to enter the egg through breaks and cracks, increasing the risk of food poisoning. Furthermore, deformations in the shell may compromise the integrity of the protective shell, exposing the egg to more external variables and causing it to lose freshness and decay faster. To reduce such hazards, this research created an innovative crack detection system based on an autoencoder (AE) that uses acoustic signals from eggshells. A system that creates an acoustic effect by hitting the eggshell without damaging it was designed, and these effects were recorded through a microphone. Acoustic signal data of size 1 × 1000 was fed into k nearest neighbor (kNN), decision tree (DT), and support vector machine (SVM) classifiers. AE was employed to reduce data size in order to accommodate the raw data's unique features. This AE model, which reduces data size, was used with many classifiers and was able to accurately distinguish between intact and cracked eggs. The built AE‐based classifier model completed the classification procedure with 100% accuracy, including microcracks that are invisible to the naked eye.
- 7 November 2024
- Published by Wiley in Journal of Food Process Engineering
- Vol. 47 (11)
Autoencoder‐Based Eggshell Crack Detection Using Acoustic Signal
Breaks or cracks in eggshells offer substantial food safety issues. Bacteria and viruses, in particular, are more likely to enter the egg through breaks and cracks, increasing the risk of food poisoning. Furthermore, deformations in the shell may compromise the integrity of the protective shell, exposing the egg to more external variables and causing it to lose freshness and decay faster. To reduce such hazards, this research created an innovative crack detection system based on an autoencoder (AE) that uses acoustic signals from eggshells. A system that creates an acoustic effect by hitting the eggshell without damaging it was designed, and these effects were recorded through a microphone. Acoustic signal data of size 1 × 1000 was fed into k nearest neighbor (kNN), decision tree (DT), and support vector machine (SVM) classifiers. AE was employed to reduce data size in order to accommodate the raw data's unique features. This AE model, which reduces data size, was used with many classifiers and was able to accurately distinguish between intact and cracked eggs. The built AE‐based classifier model completed the classification procedure with 100% accuracy, including microcracks that are invisible to the naked eye.
- Open Access
- 26 June 2023
- Published by Journal of Materials and Mechatronics: A in Journal of Materials and Mechatronics: A
- Vol. 4 (1) , 271-285
Çok Fonksiyonlu Akıllı Masa Saati
Her türlü kullanıcıya hitap edecek ara yüz ile kullanım kolaylığı sağlayan fonksiyonel bir akıllı masa saati bu çalışmada gerçekleştirilmiştir. Akıllı masa saati zamanı analog/dijital göstermenin yanında sıcaklık, nem, hava kalitesi gibi bulunduğu ortamla ilgili kullanıcıya bilgi vermektedir. Sensörlerden gelen verilerin sınır değerlerin dışına çıkması durumunda sesli ikaz vermenin yanında TFT ekranda da durumun ayrıntılı bilgisi gösterilmektedir. FM radyo ve MP3 modülleri sayesinde dijital bir radyo ile MP3 çaların birçok özelliği akıllı masa saatinde bulunmaktadır. RTC modülü ve batarya kullanımıyla elektrik kesintisi durumunda ayar gerektirmeden saat, gün, ay ve yıl bilgisi TFT ekranda kullanıcıya sunulmaktadır. Hastalar için oluşturulan ilaç takip ara yüzü ile ayarlanan ilaç kullanım zamanları sesli ikaz ile kullanıcıya bildirilmekte, onay alınmaması durumunda bu bilgi SD karttaki ilgili dosyada kayıt altına alınmaktadır. Gerek hasta gerekse ilaçlar için ortam sıcaklık ve nem parametreleri sürekli kontrol edilmektedir. Görme engeli veya zorluğu olan bireyler için bluetooth modülü ile TFT ekrandan yapılacak çoğu işlemin Android işletim sistemine sahip bir cep telefonu/tablet vasıtasıyla sesli olarak yapabilmesi imkânı sunulmaktadır. Akıllı masa saati modüler bir yapıya sahip olduğundan yazılımında güncelleme yapılarak yeni donanımlar kolayca eklenebilmektedir.
- 26 June 2023
- Published by Journal of Materials and Mechatronics: A in Journal of Materials and Mechatronics: A
- Vol. 4 (1) , 271-285
Open AccessÇok Fonksiyonlu Akıllı Masa Saati
Her türlü kullanıcıya hitap edecek ara yüz ile kullanım kolaylığı sağlayan fonksiyonel bir akıllı masa saati bu çalışmada gerçekleştirilmiştir. Akıllı masa saati zamanı analog/dijital göstermenin yanında sıcaklık, nem, hava kalitesi gibi bulunduğu ortamla ilgili kullanıcıya bilgi vermektedir. Sensörlerden gelen verilerin sınır değerlerin dışına çıkması durumunda sesli ikaz vermenin yanında TFT ekranda da durumun ayrıntılı bilgisi gösterilmektedir. FM radyo ve MP3 modülleri sayesinde dijital bir radyo ile MP3 çaların birçok özelliği akıllı masa saatinde bulunmaktadır. RTC modülü ve batarya kullanımıyla elektrik kesintisi durumunda ayar gerektirmeden saat, gün, ay ve yıl bilgisi TFT ekranda kullanıcıya sunulmaktadır. Hastalar için oluşturulan ilaç takip ara yüzü ile ayarlanan ilaç kullanım zamanları sesli ikaz ile kullanıcıya bildirilmekte, onay alınmaması durumunda bu bilgi SD karttaki ilgili dosyada kayıt altına alınmaktadır. Gerek hasta gerekse ilaçlar için ortam sıcaklık ve nem parametreleri sürekli kontrol edilmektedir. Görme engeli veya zorluğu olan bireyler için bluetooth modülü ile TFT ekrandan yapılacak çoğu işlemin Android işletim sistemine sahip bir cep telefonu/tablet vasıtasıyla sesli olarak yapabilmesi imkânı sunulmaktadır. Akıllı masa saati modüler bir yapıya sahip olduğundan yazılımında güncelleme yapılarak yeni donanımlar kolayca eklenebilmektedir.
- 28 June 2022
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
- Vol. 23 (2) , 161-172
THE DETECTION OF EGGSHELL CRACKS USING DIFFERENT CLASSIFIERS
Chicken eggs, which are widely consumed in daily life due to their rich nutritional values, are also used in many products. The increasing need for eggs must be met quickly for various circumstances. Eggs are subjected to various impacts and shaken from production to packaging. In some cases, these effects cause an eggshell to crack. While these cracks are sometimes visible, they are sometimes micro-sized and cannot be seen. The cracks on the egg allow harmful micro-organisms to spoil the egg in a short time. In this study, acoustic signals generated by a mechanical effect to the eggs were recorded for 0.2 seconds at 50 kHz sampling frequency using a microphone. To determine the active part in the collected acoustic signal data, a clipping process was implemented by a thresholding process. Thus, the exactly correct moment of mechanical contact on the eggshell was easily detected. After passing the determined threshold value, statistical parameters such as min, max, difference, mean, standard deviation, skewness and kurtosis were extracted from the data obtained, and 7-dimensional feature vectors were created. Finally, the Common Vector Approach (CVA) is applied on the extracted feature vectors, 100% success rate has been achieved for the test data set. The ANN and SVM classifiers in where the same feature vectors are treated were used for the comparison purpose, and exactly the same classification rates are attained; however, the less number of eggs are tested with the ANN and SVM classifiers in the same amount of time. With the proposed mechanical system and classification methodology, it takes about 0.2008 seconds to determine whether the shells of eggs are cracked/intact. Therefore, the proposed combination of the feature vectors based on statistical features and CVA as a classifier for the detection of cracks on eggshells is notably appropriate especially for industrial applications in terms of speed and accuracy aspects.
- 28 June 2022
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
- Vol. 23 (2) , 161-172
THE DETECTION OF EGGSHELL CRACKS USING DIFFERENT CLASSIFIERS
Chicken eggs, which are widely consumed in daily life due to their rich nutritional values, are also used in many products. The increasing need for eggs must be met quickly for various circumstances. Eggs are subjected to various impacts and shaken from production to packaging. In some cases, these effects cause an eggshell to crack. While these cracks are sometimes visible, they are sometimes micro-sized and cannot be seen. The cracks on the egg allow harmful micro-organisms to spoil the egg in a short time. In this study, acoustic signals generated by a mechanical effect to the eggs were recorded for 0.2 seconds at 50 kHz sampling frequency using a microphone. To determine the active part in the collected acoustic signal data, a clipping process was implemented by a thresholding process. Thus, the exactly correct moment of mechanical contact on the eggshell was easily detected. After passing the determined threshold value, statistical parameters such as min, max, difference, mean, standard deviation, skewness and kurtosis were extracted from the data obtained, and 7-dimensional feature vectors were created. Finally, the Common Vector Approach (CVA) is applied on the extracted feature vectors, 100% success rate has been achieved for the test data set. The ANN and SVM classifiers in where the same feature vectors are treated were used for the comparison purpose, and exactly the same classification rates are attained; however, the less number of eggs are tested with the ANN and SVM classifiers in the same amount of time. With the proposed mechanical system and classification methodology, it takes about 0.2008 seconds to determine whether the shells of eggs are cracked/intact. Therefore, the proposed combination of the feature vectors based on statistical features and CVA as a classifier for the detection of cracks on eggshells is notably appropriate especially for industrial applications in terms of speed and accuracy aspects.
- 30 June 2021
- Published by Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
- Vol. 8 (1) , 125-135
Yumurta Kabuğundan Alınan Akustik Sinyalin Dalgacık Paket Dönüşümü ve Entropiye Dayalı Olarak İşlenmesi ve Yapay Sinir Ağlarıyla Çatlağın Belirlenmesi
Endüstride birçok üründe ve evlerimizde, vitaminler ve mineraller bakımından zengin olmasından dolayı yumurta yaygın olarak tüketilmektedir. Artan ihtiyacın hızlı bir şekilde karşılanması için tavuk çiftliklerinde yumurtaların toplanması, ağırlıklarına göre sınıflandırılması, sağlam/çatlak olanların ayrılması, paketlenmesi vb. işlemler için otomasyona geçiş yapılmıştır. Kabuğun çatlak olması durumunda içerisine zararlı mikroorganizmalar kolaylıkla girebileceği gibi yumurta içinin havayla temasından dolayı kısa sürede bozulmasına yol açacaktır. Çatlaklar gözle görülebilecek kadar büyük olabildiği gibi bazen de mikro boyutta olmakta insan gözüyle tespit edilememektedir. Bu çalışmada yumurta kabuğunun çatlak/sağlam olması durumunun sinyal işleme ve makine öğrenme tabanlı tespiti gerçekleştirilmiştir. Mekanik sistem vasıtasıyla kabuğa yapılan darbe neticesindeki oluşan akustik sinyal sistemdeki mikrofonla 50kHz örnekleme frekansında 0.2 sn süresince kayıt altına alınmaktadır. Kabuğu sağlam ve çatlak olan ayrı ayrı 50 yumurta verisi düzenekle kayıt altına alınıp veri seti oluşturulmuştur. Yumurta kabuğuna darbenin uygulanma anından sönümlenene kadarki zamanın tespiti için 0.74V eşik değeri kullanılıp bu değerden sonraki 680 veri alınmıştır. Bu verilere db4 ana dalgacığı ile 2. seviyeden Dalgacık Paket Dönüşümü (DPD) uygulanarak farklı frekanslı detay ve yaklaşım bileşenleri çıkartılmıştır. Her bir bileşenin entropi değeri hesaplanarak 1x4 boyutunda özellik vektörü elde edilmiştir. Çıkartımı yapılan özellik vektörünün yumurta kabuğundaki çatlağın tespitindeki etkinliğini belirlemek için Yapay Sinir Ağı (YSA) kullanılmıştır. %100 başarım elde edilmiş olup bir yumurtanın kabuk çatlak/sağlam belirleme süresi yaklaşık olarak 0.216sn’dir.
- 30 June 2021
- Published by Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
- Vol. 8 (1) , 125-135
Yumurta Kabuğundan Alınan Akustik Sinyalin Dalgacık Paket Dönüşümü ve Entropiye Dayalı Olarak İşlenmesi ve Yapay Sinir Ağlarıyla Çatlağın Belirlenmesi
Endüstride birçok üründe ve evlerimizde, vitaminler ve mineraller bakımından zengin olmasından dolayı yumurta yaygın olarak tüketilmektedir. Artan ihtiyacın hızlı bir şekilde karşılanması için tavuk çiftliklerinde yumurtaların toplanması, ağırlıklarına göre sınıflandırılması, sağlam/çatlak olanların ayrılması, paketlenmesi vb. işlemler için otomasyona geçiş yapılmıştır. Kabuğun çatlak olması durumunda içerisine zararlı mikroorganizmalar kolaylıkla girebileceği gibi yumurta içinin havayla temasından dolayı kısa sürede bozulmasına yol açacaktır. Çatlaklar gözle görülebilecek kadar büyük olabildiği gibi bazen de mikro boyutta olmakta insan gözüyle tespit edilememektedir. Bu çalışmada yumurta kabuğunun çatlak/sağlam olması durumunun sinyal işleme ve makine öğrenme tabanlı tespiti gerçekleştirilmiştir. Mekanik sistem vasıtasıyla kabuğa yapılan darbe neticesindeki oluşan akustik sinyal sistemdeki mikrofonla 50kHz örnekleme frekansında 0.2 sn süresince kayıt altına alınmaktadır. Kabuğu sağlam ve çatlak olan ayrı ayrı 50 yumurta verisi düzenekle kayıt altına alınıp veri seti oluşturulmuştur. Yumurta kabuğuna darbenin uygulanma anından sönümlenene kadarki zamanın tespiti için 0.74V eşik değeri kullanılıp bu değerden sonraki 680 veri alınmıştır. Bu verilere db4 ana dalgacığı ile 2. seviyeden Dalgacık Paket Dönüşümü (DPD) uygulanarak farklı frekanslı detay ve yaklaşım bileşenleri çıkartılmıştır. Her bir bileşenin entropi değeri hesaplanarak 1x4 boyutunda özellik vektörü elde edilmiştir. Çıkartımı yapılan özellik vektörünün yumurta kabuğundaki çatlağın tespitindeki etkinliğini belirlemek için Yapay Sinir Ağı (YSA) kullanılmıştır. %100 başarım elde edilmiş olup bir yumurtanın kabuk çatlak/sağlam belirleme süresi yaklaşık olarak 0.216sn’dir.
- 28 December 2020
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
- Vol. 21 (4) , 499-513
CLASSIFICATION OF DYNAMIC EGG WEIGHTS USING FEATURE EXTRACTION METHODS
In this study, a feature vector is determined in order to classify chicken eggs into four different weight groups by using the dynamic weighing system and then the success rate of different classifiers in the process of weight classification are analyzed. The dynamic weighing system is made of three components; mechanic system, electronic control board, and software. Firstly, a data set is created on the basis of analogue egg weight data obtained from the dynamic weighing system. From the obtained data set, three different feature vectors are extracted by using Time-domain, Power Spectral Density (PSD) and Discrete Wavelet Transform (DWT)-based methods. The extracted feature vectors are then applied to Linear Bayes Normal Classifier, Fisher’s Linear Discriminant Analysis (FLDA), Support Vector Machine (SVM), Decision Tree (DT) and K-Nearest Neighborhood (k-NN) classifiers respectively and egg weight classes are determined. A five-fold cross validation is carried out in order to confidentially test the performance of classification. As can be seen from the experimental results, both feature vectors and classifiers are highly successful in determining the weight classes of eggs. It is observed that the most successful features are the entropy values of DWT with a classification rate of 97.01% for k-NN classifier.
- 28 December 2020
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
- Vol. 21 (4) , 499-513
CLASSIFICATION OF DYNAMIC EGG WEIGHTS USING FEATURE EXTRACTION METHODS
In this study, a feature vector is determined in order to classify chicken eggs into four different weight groups by using the dynamic weighing system and then the success rate of different classifiers in the process of weight classification are analyzed. The dynamic weighing system is made of three components; mechanic system, electronic control board, and software. Firstly, a data set is created on the basis of analogue egg weight data obtained from the dynamic weighing system. From the obtained data set, three different feature vectors are extracted by using Time-domain, Power Spectral Density (PSD) and Discrete Wavelet Transform (DWT)-based methods. The extracted feature vectors are then applied to Linear Bayes Normal Classifier, Fisher’s Linear Discriminant Analysis (FLDA), Support Vector Machine (SVM), Decision Tree (DT) and K-Nearest Neighborhood (k-NN) classifiers respectively and egg weight classes are determined. A five-fold cross validation is carried out in order to confidentially test the performance of classification. As can be seen from the experimental results, both feature vectors and classifiers are highly successful in determining the weight classes of eggs. It is observed that the most successful features are the entropy values of DWT with a classification rate of 97.01% for k-NN classifier.
- Open Access
- 15 December 2020
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 4 (3) , 249-254
Liquid level control with different control methods based on Matlab/Simulink and Arduino for the control systems lesson
Liquid level control is needed in many areas, from simple to complex, from daily life to industry. With the developed system in this study, it was aimed to ensure the students of the control system course to learn the concepts of a closed-loop control system and to observe the effect of changes in the system in real-time. The system consists of two tanks, a pump, a pressure sensor, a power supply, a regulated voltage source, a computer, and an Arduino Due board. By using the Matlab/Simulink and added Arduino blocks, software of the control system was created without code need. It is possible to control the liquid level system via the control board through the computer, as well as to control it without a computer by the embedded software. Liquid level control is carried out with different types of control methods from basic level to advanced level (On-off, PID, ANN-PID, and Fuzzy-PID controller). It is also possible to record the desired parameters in real-time, such as reference level, actual level, error signal, and control signal, in the liquid level control system. In this study, an interface for a PID controller was prepared using Matlab/Gui. It was concluded that with Matlab/Simulink blocks added to the system, different control methods could be applied easily.
- 15 December 2020
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 4 (3) , 249-254
Open AccessLiquid level control with different control methods based on Matlab/Simulink and Arduino for the control systems lesson
Liquid level control is needed in many areas, from simple to complex, from daily life to industry. With the developed system in this study, it was aimed to ensure the students of the control system course to learn the concepts of a closed-loop control system and to observe the effect of changes in the system in real-time. The system consists of two tanks, a pump, a pressure sensor, a power supply, a regulated voltage source, a computer, and an Arduino Due board. By using the Matlab/Simulink and added Arduino blocks, software of the control system was created without code need. It is possible to control the liquid level system via the control board through the computer, as well as to control it without a computer by the embedded software. Liquid level control is carried out with different types of control methods from basic level to advanced level (On-off, PID, ANN-PID, and Fuzzy-PID controller). It is also possible to record the desired parameters in real-time, such as reference level, actual level, error signal, and control signal, in the liquid level control system. In this study, an interface for a PID controller was prepared using Matlab/Gui. It was concluded that with Matlab/Simulink blocks added to the system, different control methods could be applied easily.
- Open Access
- 15 April 2020
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 4 (1) , 21-28
Application of reverse engineering approach on a damaged mechanical part
Reverse engineering methods are important for remodeling or measuring damaged or non-damaged parts. Reverse engineering also enables the design of complex components, reducing actual product production time and prototype production time. With this method, damaged gear wheels can be modeled in a short time due to the regular geometry and symmetrical properties of the teeth and it is real models can be produced. In this study, the damaged motor cam gear was scanned with a three dimensional (3D) scanner and a mesh model was formed. Then, solid model of part was created and genuine prototype was produced with 3D printer. The deviations of geometric dimensions between the mesh model and the solid model were analyzed and the levels of convergence were determined. The three-dimensional prototyping method provides great convenience for the designer due to it gives quick feedback in product development process. At the end of the study, geometric values between solid model and prototype model were compared and deviations from actual value were determined.
- 15 April 2020
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 4 (1) , 21-28
Open AccessApplication of reverse engineering approach on a damaged mechanical part
Reverse engineering methods are important for remodeling or measuring damaged or non-damaged parts. Reverse engineering also enables the design of complex components, reducing actual product production time and prototype production time. With this method, damaged gear wheels can be modeled in a short time due to the regular geometry and symmetrical properties of the teeth and it is real models can be produced. In this study, the damaged motor cam gear was scanned with a three dimensional (3D) scanner and a mesh model was formed. Then, solid model of part was created and genuine prototype was produced with 3D printer. The deviations of geometric dimensions between the mesh model and the solid model were analyzed and the levels of convergence were determined. The three-dimensional prototyping method provides great convenience for the designer due to it gives quick feedback in product development process. At the end of the study, geometric values between solid model and prototype model were compared and deviations from actual value were determined.
- 6 April 2018
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 2018 (2018) , 393-401
Destek vektör makineleri kullanarak dinamik yumurta ağırlıklarının sınıflandırılması
Günümüzde üretim sektöründe hız önemli bir faktör haline gelmiştir. Bundan dolayı üretilen ürünlerin ağırlıklarının tartımlarının da hızlı bir şekilde yapılması gerekmektedir. Hızlı bir şekilde tartım işlemi yapabilmek için dinamik tartım sistemleri geliştirilmiştir. Dinamik tartım sistemlerinde ürünler tartım platformu üzerinden hareket halinde geçerken tartılmaktadırlar ve istenilen tartım hızlarına bu şekilde ulaşılabilmektedir. Ancak dinamik tartım sistemlerinde ürünün hareketli tartılmasından dolayı sistemdeki mekanik titreşimler ölçüm sinyalinde istenmeyen bir bozucu etki oluşturmaktadır. Geleneksel olarak bu sinyal filtrelendikten sonra ürünün stabil olduğu andaki tartım ağırlığı bir metot kullanılarak belirlenmeye çalışılmaktadır. Genellikle ürünler ağılıkları belirlendikten sonra belirli ağırlık sınıflarına göre tasnif edilmektedirler. Bu çalışmada dinamik olarak tartılan yumurtaların Gıda Tarım Hayvancılık Bakanlığı Türk Gıda Kodeksi Yumurta Tebliğinde belirtilen ağırlık sınıflarına göre tasnif edilmesi destek vektör makineleri kullanılarak doğrudan ham veriyle gerçekleştirilmiştir.
- 6 April 2018
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 2018 (2018) , 393-401
Destek vektör makineleri kullanarak dinamik yumurta ağırlıklarının sınıflandırılması
Günümüzde üretim sektöründe hız önemli bir faktör haline gelmiştir. Bundan dolayı üretilen ürünlerin ağırlıklarının tartımlarının da hızlı bir şekilde yapılması gerekmektedir. Hızlı bir şekilde tartım işlemi yapabilmek için dinamik tartım sistemleri geliştirilmiştir. Dinamik tartım sistemlerinde ürünler tartım platformu üzerinden hareket halinde geçerken tartılmaktadırlar ve istenilen tartım hızlarına bu şekilde ulaşılabilmektedir. Ancak dinamik tartım sistemlerinde ürünün hareketli tartılmasından dolayı sistemdeki mekanik titreşimler ölçüm sinyalinde istenmeyen bir bozucu etki oluşturmaktadır. Geleneksel olarak bu sinyal filtrelendikten sonra ürünün stabil olduğu andaki tartım ağırlığı bir metot kullanılarak belirlenmeye çalışılmaktadır. Genellikle ürünler ağılıkları belirlendikten sonra belirli ağırlık sınıflarına göre tasnif edilmektedirler. Bu çalışmada dinamik olarak tartılan yumurtaların Gıda Tarım Hayvancılık Bakanlığı Türk Gıda Kodeksi Yumurta Tebliğinde belirtilen ağırlık sınıflarına göre tasnif edilmesi destek vektör makineleri kullanılarak doğrudan ham veriyle gerçekleştirilmiştir.