İsMail Yabanova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
İsMail Yabanova has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Yumurtaci
Afyon Kocatepe Universitesi
8 shared publications - Tarık Ünler
Necmettin Erbakan Universitesi
4 shared publications - Zekeriya Balci
Van Yüzüncü Yıl University
4 shared publications - Hasan Çimen
Department of Electrical and Electronic Engineering, Afyon Kocatepe University 2 , Afyonkarahisar
3 shared publications - Semih Ergin
Department of Electrical and Electronics Engineering Eskisehir Osmangazi University Eskisehir Türkiye
3 shared publications - Veli Yenil
Pamukkale Universitesi
3 shared publications
Latest Publications
- Open Access
- 12 October 2026
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 32 (4) , 953-966
Dynamic Weighing Signal Denoising Approach Based on Convolutional Denoising Autoencoders: A Novel Rapid Weight Determination for Egg Sorting Machines
With the increasing scale of industrial egg production, rapid and precise weight classification has become a technical necessity. While dynamic weighing systems are employed to maintain high production speeds, load cell signals in these systems are significantly corrupted by mechanical vibrations and environmental noise, compromising measurement accuracy. This study proposes a Convolutional Denoising Autoencoder (CDAE)-based approach to effectively filter these dynamic weighing signals and ensure accurate classification. The performance of the proposed method was evaluated and compared against traditional filtering techniques, specifically Discrete Wavelet Transform (DWT) and Moving Average Filter (MAF). The results demonstrate that the CDAE-based model provides superior noise reduction, enabling faster and more stable weight determination compared to conventional methods. By addressing the limitations of traditional filters in high-speed environments, this study offers a robust artificial intelligence-based solution to the precision dynamic weighing challenges encountered in the food industry.
- 12 October 2026
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 32 (4) , 953-966
Open AccessDynamic Weighing Signal Denoising Approach Based on Convolutional Denoising Autoencoders: A Novel Rapid Weight Determination for Egg Sorting Machines
With the increasing scale of industrial egg production, rapid and precise weight classification has become a technical necessity. While dynamic weighing systems are employed to maintain high production speeds, load cell signals in these systems are significantly corrupted by mechanical vibrations and environmental noise, compromising measurement accuracy. This study proposes a Convolutional Denoising Autoencoder (CDAE)-based approach to effectively filter these dynamic weighing signals and ensure accurate classification. The performance of the proposed method was evaluated and compared against traditional filtering techniques, specifically Discrete Wavelet Transform (DWT) and Moving Average Filter (MAF). The results demonstrate that the CDAE-based model provides superior noise reduction, enabling faster and more stable weight determination compared to conventional methods. By addressing the limitations of traditional filters in high-speed environments, this study offers a robust artificial intelligence-based solution to the precision dynamic weighing challenges encountered in the food industry.
- 1 May 2026
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 18 (3)
Application of characteristic curves appropriate for relay coordination in adaptive protection networks containing distributed generation facilities
The integration of distributed generation (DG) facilities into power grids improves energy supply but introduces significant complexity, particularly with respect to protection coordination. Since power output from most DG facilities depends on variable conditions such as wind speed and solar irradiance, the magnitude of short-circuit currents that arise during faults also varies continuously. This variability causes deterioration of overcurrent relay coordination and selectivity, potentially leading to unnecessary power outages and equipment damage. To address this challenge, this study proposes an adaptive protection algorithm that selects the most appropriate relay time-current characteristic curve based on the real-time connection status of DG facilities to the network. The algorithm distinguishes among eight operating modes defined by the on/off states of three DG units and assigns either the standard inverse or extremely inverse characteristic curve accordingly. The proposed method was implemented and validated in a MATLAB/Simulink environment using a modified IEEE 4-bus test system integrated with three squirrel-cage induction generator-based wind turbines. Performance was evaluated across 24 scenarios comprising 8 operating modes and 3 fault locations. Simulation results demonstrate that the proposed algorithm reduces the tripping time of backup relays in 20 out of 24 cases, with improvements ranging from 29.11% to 90.98% compared to conventional adaptive protection. These findings confirm that the proposed method significantly enhances relay coordination, selectivity, and system protection in DG-integrated networks.
- 1 May 2026
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 18 (3)
Application of characteristic curves appropriate for relay coordination in adaptive protection networks containing distributed generation facilities
The integration of distributed generation (DG) facilities into power grids improves energy supply but introduces significant complexity, particularly with respect to protection coordination. Since power output from most DG facilities depends on variable conditions such as wind speed and solar irradiance, the magnitude of short-circuit currents that arise during faults also varies continuously. This variability causes deterioration of overcurrent relay coordination and selectivity, potentially leading to unnecessary power outages and equipment damage. To address this challenge, this study proposes an adaptive protection algorithm that selects the most appropriate relay time-current characteristic curve based on the real-time connection status of DG facilities to the network. The algorithm distinguishes among eight operating modes defined by the on/off states of three DG units and assigns either the standard inverse or extremely inverse characteristic curve accordingly. The proposed method was implemented and validated in a MATLAB/Simulink environment using a modified IEEE 4-bus test system integrated with three squirrel-cage induction generator-based wind turbines. Performance was evaluated across 24 scenarios comprising 8 operating modes and 3 fault locations. Simulation results demonstrate that the proposed algorithm reduces the tripping time of backup relays in 20 out of 24 cases, with improvements ranging from 29.11% to 90.98% compared to conventional adaptive protection. These findings confirm that the proposed method significantly enhances relay coordination, selectivity, and system protection in DG-integrated networks.
- 31 March 2026
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 41 (1) , 719-730
Dağıtık üretim tesisleri içeren adaptif korumadaki şebekelerde yeni bir röle koordinasyonu uygulaması
Elektrik dağıtım hatlarının korunması konusu günümüzde popüler olan akıllı şebekelerde olmazsa olmaz bir durumdur. Elektrik dağıtım hatlarının ise gelecekte yetersiz kalacak olması dağıtım hatlarına Dağıtık Üretimlerin (DÜ) bağlanmasını kaçınılmaz kılmaktadır. Elektrik dağıtım hatlarına gün geçtikçe artan bir şekilde DÜ ünitelerinin bağlanması birçok fayda sağlarken bir o kadar da dağıtım hattını karmaşık bir yapıya büründürmektedir. Bu durum elektrik dağıtım hatlarının korunmasını bir derece daha zorlaştırmaktadır. Rüzgâr enerjisi vb. DÜ tesislerinde enerjinin üretimi atmosfer şartlarına bağımlı olduğundan bu durum şebekede oluşabilecek kısa devre akımlarını doğrudan etkilemektedir. Bu sorunlar belirli bir koordinasyonda çalışan rölelerin yanlış çalışmasına, iki rölenin aynı anda çalışmasına (selektivite sağlanamadığından), gereksiz enerji kesintisi gibi durumlara yol açabilmektedir. Bu sorunların önüne geçmek için ise akıllı şebekelerde çift yönlü adaptif korumaya ve buna uygun şekilde çalışacak algoritmalara ihtiyaç duyulmaktadır. Bu çalışmada bahsedilen korumaya uygun bir algoritma önerilmiştir. Günümüz koşullarına ve orijinaline uygun bir şekilde değiştirilen IEEE 4-baralı test sistemi üzerinde yapılan simülasyon çalışmaları önerilen algoritma ile rölelerin daha doğru bir şekilde çalışmasına olanak sağlamıştır. Böylece önerilen algoritma ile çalışan adaptif korumadaki yedek rölelerin çalışması ile normal adaptif korumadaki yedek rölelerin çalışması karşılaştırılmış ve sonuçlar sunulmuştur.
- 31 March 2026
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 41 (1) , 719-730
Dağıtık üretim tesisleri içeren adaptif korumadaki şebekelerde yeni bir röle koordinasyonu uygulaması
Elektrik dağıtım hatlarının korunması konusu günümüzde popüler olan akıllı şebekelerde olmazsa olmaz bir durumdur. Elektrik dağıtım hatlarının ise gelecekte yetersiz kalacak olması dağıtım hatlarına Dağıtık Üretimlerin (DÜ) bağlanmasını kaçınılmaz kılmaktadır. Elektrik dağıtım hatlarına gün geçtikçe artan bir şekilde DÜ ünitelerinin bağlanması birçok fayda sağlarken bir o kadar da dağıtım hattını karmaşık bir yapıya büründürmektedir. Bu durum elektrik dağıtım hatlarının korunmasını bir derece daha zorlaştırmaktadır. Rüzgâr enerjisi vb. DÜ tesislerinde enerjinin üretimi atmosfer şartlarına bağımlı olduğundan bu durum şebekede oluşabilecek kısa devre akımlarını doğrudan etkilemektedir. Bu sorunlar belirli bir koordinasyonda çalışan rölelerin yanlış çalışmasına, iki rölenin aynı anda çalışmasına (selektivite sağlanamadığından), gereksiz enerji kesintisi gibi durumlara yol açabilmektedir. Bu sorunların önüne geçmek için ise akıllı şebekelerde çift yönlü adaptif korumaya ve buna uygun şekilde çalışacak algoritmalara ihtiyaç duyulmaktadır. Bu çalışmada bahsedilen korumaya uygun bir algoritma önerilmiştir. Günümüz koşullarına ve orijinaline uygun bir şekilde değiştirilen IEEE 4-baralı test sistemi üzerinde yapılan simülasyon çalışmaları önerilen algoritma ile rölelerin daha doğru bir şekilde çalışmasına olanak sağlamıştır. Böylece önerilen algoritma ile çalışan adaptif korumadaki yedek rölelerin çalışması ile normal adaptif korumadaki yedek rölelerin çalışması karşılaştırılmış ve sonuçlar sunulmuştur.
- 26 December 2025
- Published by Journal of Materials and Mechatronics: A in Journal of Materials and Mechatronics: A
- Vol. 6 (2) , 366-380
Overcurrent Relay Coordination in Adaptive Protected Networks with Integrated Wind Energy
The fact that the capacity of electricity distribution networks will be insufficient in the future has forced people to integrate DG (Distributed Generation) facilities into their distribution networks. Although DG facilities provide many benefits to the grid, they also lead to complexity in the distribution network. This situation not only makes it difficult to protect the distribution network but also causes short circuit currents to have a variable structure. Variable short circuit currents cause the relays to activate at the wrong time, causing OCR (Overcurrent Relay) coordination to be disrupted. For this reason, bidirectional relays and adaptive protection are needed in the networks. In this study, the IEEE 4-bus test system, which includes DG facilities and was created in accordance with its original form, was used for simulation studies. In this way, the effect of short circuit current variability is minimized and optimum protection is achieved by quickly adapting to variable network conditions.
- 26 December 2025
- Published by Journal of Materials and Mechatronics: A in Journal of Materials and Mechatronics: A
- Vol. 6 (2) , 366-380
Overcurrent Relay Coordination in Adaptive Protected Networks with Integrated Wind Energy
The fact that the capacity of electricity distribution networks will be insufficient in the future has forced people to integrate DG (Distributed Generation) facilities into their distribution networks. Although DG facilities provide many benefits to the grid, they also lead to complexity in the distribution network. This situation not only makes it difficult to protect the distribution network but also causes short circuit currents to have a variable structure. Variable short circuit currents cause the relays to activate at the wrong time, causing OCR (Overcurrent Relay) coordination to be disrupted. For this reason, bidirectional relays and adaptive protection are needed in the networks. In this study, the IEEE 4-bus test system, which includes DG facilities and was created in accordance with its original form, was used for simulation studies. In this way, the effect of short circuit current variability is minimized and optimum protection is achieved by quickly adapting to variable network conditions.
- Open Access
- 29 July 2025
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 31 (3) , 802-813
Design of a Dynamic Weighing System and AI-Based Sorting Process for Egg Sorting Machines
Eggs are one of the world's most significant food sources since they include numerous critical nutrients such as protein, vitamins, minerals, and omega-3 fatty acids. Egg production and consumption have expanded dramatically in the previous two decades because of population growth and industrialization. To fulfill rising demand, automating of egg production facilities has become necessary. To distribute eggs to consumers and maintain quality requirements, eggs must be divided into weight categories. Due to production capacity, this process must be carried out using machines. High production volumes necessitate a rapid weighing process; hence eggs are weighed dynamically in machines. The weighing signal obtained from the load cell is filtered to determine the stable weight, which is then used to calculate the egg's weight class. In this paper, instead of performing all of these processes using classical approaches, a Stacked Autoencoder (SAE) based classification system is developed that will predict the egg's class using only raw weight data. To assess the effectiveness of the suggested method, classification performance was compared using support vector machines (SVM), knearest neighbors (kNN), and decision trees (DT). The suggested approach determines the weight class of the egg in roughly 0.084 sec with 100% accuracy. Given the increasing egg demand, the proposed technology allows for a considerably faster egg categorization procedure, boosting production speed and lowering production costs.
- 29 July 2025
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 31 (3) , 802-813
Open AccessDesign of a Dynamic Weighing System and AI-Based Sorting Process for Egg Sorting Machines
Eggs are one of the world's most significant food sources since they include numerous critical nutrients such as protein, vitamins, minerals, and omega-3 fatty acids. Egg production and consumption have expanded dramatically in the previous two decades because of population growth and industrialization. To fulfill rising demand, automating of egg production facilities has become necessary. To distribute eggs to consumers and maintain quality requirements, eggs must be divided into weight categories. Due to production capacity, this process must be carried out using machines. High production volumes necessitate a rapid weighing process; hence eggs are weighed dynamically in machines. The weighing signal obtained from the load cell is filtered to determine the stable weight, which is then used to calculate the egg's weight class. In this paper, instead of performing all of these processes using classical approaches, a Stacked Autoencoder (SAE) based classification system is developed that will predict the egg's class using only raw weight data. To assess the effectiveness of the suggested method, classification performance was compared using support vector machines (SVM), knearest neighbors (kNN), and decision trees (DT). The suggested approach determines the weight class of the egg in roughly 0.084 sec with 100% accuracy. Given the increasing egg demand, the proposed technology allows for a considerably faster egg categorization procedure, boosting production speed and lowering production costs.
- 30 June 2025
- Published by Necmettin Erbakan University in ASREL
CANaerospace Protokolü ve LabVIEW Tabanlı Veri İletişim Uygulaması
Havacılık sektörü hem dünyada hem de Türkiye’de teknolojik gelişmelerle paralel olarak sürekli bir ilerleme içerisindedir. Bu ilerleme, sınırlı enerji kaynaklarının verimli kullanımı gerekliliği ile birlikte sağlam, ekonomik ve hafif sistem tasarımlarını zorunlu kılmaktadır. Uçaklarda bulunan çok sayıda aviyonik sistemin güvenli ve hızlı şekilde birbiriyle haberleşebilmesi, bu sistemlerin etkin çalışması açısından kritik öneme sahiptir. Bu doğrultuda, kablolama karmaşasını azaltmak ve hafif yapılar oluşturmak amacıyla çeşitli haberleşme protokolleri geliştirilmiştir. İlk olarak otomotiv sektörü için Bosch firması tarafından geliştirilen denetleyici alan ağı (Controller Area Network - CAN) protokolü, düşük maliyetli ve yüksek güvenilirlikli bir seri iletişim protokolüdür. Özellikle kablolama karmaşasını azaltmak ve gerçek zamanlı veri iletimi sağlamak için tasarlanmıştır. CAN sağlamlığı ve düşük gecikme süresi gibi avantajları sayesinde havacılık, endüstriyel otomasyon ve askeri araçlar gibi birçok farklı alanlarda da kullanılmaya başlanmıştır. CAN tabanlı bir üst seviye protokol olan CANaerospace ise, 1998 yılında Stock Flight Systems tarafından, CAN üzerine inşa edilerek, havacılığın gerçek zamanlılık, hata toleransı ve birlikte çalışabilirlik gibi özel gereksinimlerine cevap verebilecek şekilde geliştirilmiş modüler ve esnek yapısıyla dikkat çeken bir veri iletim protokolüdür. Bu çalışmada havacılık sektöründe kullanılan CAN tabanlı CANaerospace protokolü detaylı olarak incelenmiş, bu protokol kullanılarak LabVIEW programı ortamında bir veri alışverişi uygulaması geliştirilmiştir. National Instruments firmasının NI USB 8473s donanımı aracılığıyla bilgisayar, CAN ağına bağlanmış ve CANaerospace protokolünden gelen mesajlar yazılım aracılığıyla ayrıştırılarak görsel olarak kullanıcıya sunulmuştur. Aynı zamanda kullanıcılar, gerekli alanlara veri girerek protokol formatına uygun mesajlar gönderebilmektedir. Bu sistem, CANaerospace protokolünün etkin bir şekilde anlaşılmasını sağlamakta, aynı zamanda aviyonik sistemlerin geliştirme ve test süreçlerinde kullanılabilecek pratik bir araç sunmaktadır. Geliştirilen program, protokol analizörü olarak işlev görmesinin yanı sıra eğitim ve prototipleme amacıyla da kullanılabilecek niteliktedir.
- 30 June 2025
- Published by Necmettin Erbakan University in ASREL
CANaerospace Protokolü ve LabVIEW Tabanlı Veri İletişim Uygulaması
Havacılık sektörü hem dünyada hem de Türkiye’de teknolojik gelişmelerle paralel olarak sürekli bir ilerleme içerisindedir. Bu ilerleme, sınırlı enerji kaynaklarının verimli kullanımı gerekliliği ile birlikte sağlam, ekonomik ve hafif sistem tasarımlarını zorunlu kılmaktadır. Uçaklarda bulunan çok sayıda aviyonik sistemin güvenli ve hızlı şekilde birbiriyle haberleşebilmesi, bu sistemlerin etkin çalışması açısından kritik öneme sahiptir. Bu doğrultuda, kablolama karmaşasını azaltmak ve hafif yapılar oluşturmak amacıyla çeşitli haberleşme protokolleri geliştirilmiştir. İlk olarak otomotiv sektörü için Bosch firması tarafından geliştirilen denetleyici alan ağı (Controller Area Network - CAN) protokolü, düşük maliyetli ve yüksek güvenilirlikli bir seri iletişim protokolüdür. Özellikle kablolama karmaşasını azaltmak ve gerçek zamanlı veri iletimi sağlamak için tasarlanmıştır. CAN sağlamlığı ve düşük gecikme süresi gibi avantajları sayesinde havacılık, endüstriyel otomasyon ve askeri araçlar gibi birçok farklı alanlarda da kullanılmaya başlanmıştır. CAN tabanlı bir üst seviye protokol olan CANaerospace ise, 1998 yılında Stock Flight Systems tarafından, CAN üzerine inşa edilerek, havacılığın gerçek zamanlılık, hata toleransı ve birlikte çalışabilirlik gibi özel gereksinimlerine cevap verebilecek şekilde geliştirilmiş modüler ve esnek yapısıyla dikkat çeken bir veri iletim protokolüdür. Bu çalışmada havacılık sektöründe kullanılan CAN tabanlı CANaerospace protokolü detaylı olarak incelenmiş, bu protokol kullanılarak LabVIEW programı ortamında bir veri alışverişi uygulaması geliştirilmiştir. National Instruments firmasının NI USB 8473s donanımı aracılığıyla bilgisayar, CAN ağına bağlanmış ve CANaerospace protokolünden gelen mesajlar yazılım aracılığıyla ayrıştırılarak görsel olarak kullanıcıya sunulmuştur. Aynı zamanda kullanıcılar, gerekli alanlara veri girerek protokol formatına uygun mesajlar gönderebilmektedir. Bu sistem, CANaerospace protokolünün etkin bir şekilde anlaşılmasını sağlamakta, aynı zamanda aviyonik sistemlerin geliştirme ve test süreçlerinde kullanılabilecek pratik bir araç sunmaktadır. Geliştirilen program, protokol analizörü olarak işlev görmesinin yanı sıra eğitim ve prototipleme amacıyla da kullanılabilecek niteliktedir.
- Open Access
- 30 April 2025
- Published by Necmettin Erbakan University in Necmettin Erbakan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi
- Vol. 7 (1) , 12-21
Implementation of Single-Scan Connected Component Labeling for FPGA Hardware
Görüntü işleme dijital görüntüyü işleyip analiz ederek belirli bilgileri çıkarmayı ve nesnelerin tanımlanmasını hedefleyen bilgisayar bilimidir. Görüntüleme sistemleri günümüzde tıp, savunma sanayi, güvenlik, otomotiv ve otomasyon alanları başta olmak üzere hayatımızın her alanında yer almaktadır. Bundan dolayı görüntünün belirlenen amaçlar doğrultusunda işlenmesi gerekmektedir. Blob tespiti görüntü işlemede nesne tanıma, algılama için kullanılan bir kavramdır ve görüntüdeki bir nesnenin sınırlarını belirleyen bir grup pikseli ifade eder. Blob analizi için farklı algoritmalar geliştirilmiştir. Bu algoritmalardan birisi görüntü işlemede yaygın olarak kullanılan ve amacı bir nesneye ait tüm piksellere aynı etiketi atamak olan bağlantılı bileşen etiketleme algoritmasıdır. Bu çalışmada görüntüdeki nesnelerin tespiti için bağlantılı bileşen etiketleme algoritması FPGA yapısı üzerinde uygulanmak üzere hazırlanmış ve simülasyon ortamında test edilmiştir. Bir görüntü karesinin tamamının aynı anda işlenmesi bellek kaynakları açısından verimsiz olduğundan dolayı görüntü satır satır okunup işlenmiştir. Görüntü karesinden tek geçişte her piksel etiketlenmiş ve bağlantılı pikseller birleştirilerek her blobun alanı, sınırları ve ağırlık merkezi hesaplanmıştır. Bu şekilde PL-PS yapılarının bir arada kullanılmasına imkân sağlayacak CCL algoritmasının uygulanması için altyapı sağlanmıştır. İlerde yapılacak çalışmalarda blob tespiti işlemi ZYNQ yapısının PS ve PL kısımlarına uygulanarak verimli bir sistem geliştirilmesi hedeflenmektedir.
- 30 April 2025
- Published by Necmettin Erbakan University in Necmettin Erbakan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi
- Vol. 7 (1) , 12-21
Open AccessImplementation of Single-Scan Connected Component Labeling for FPGA Hardware
Görüntü işleme dijital görüntüyü işleyip analiz ederek belirli bilgileri çıkarmayı ve nesnelerin tanımlanmasını hedefleyen bilgisayar bilimidir. Görüntüleme sistemleri günümüzde tıp, savunma sanayi, güvenlik, otomotiv ve otomasyon alanları başta olmak üzere hayatımızın her alanında yer almaktadır. Bundan dolayı görüntünün belirlenen amaçlar doğrultusunda işlenmesi gerekmektedir. Blob tespiti görüntü işlemede nesne tanıma, algılama için kullanılan bir kavramdır ve görüntüdeki bir nesnenin sınırlarını belirleyen bir grup pikseli ifade eder. Blob analizi için farklı algoritmalar geliştirilmiştir. Bu algoritmalardan birisi görüntü işlemede yaygın olarak kullanılan ve amacı bir nesneye ait tüm piksellere aynı etiketi atamak olan bağlantılı bileşen etiketleme algoritmasıdır. Bu çalışmada görüntüdeki nesnelerin tespiti için bağlantılı bileşen etiketleme algoritması FPGA yapısı üzerinde uygulanmak üzere hazırlanmış ve simülasyon ortamında test edilmiştir. Bir görüntü karesinin tamamının aynı anda işlenmesi bellek kaynakları açısından verimsiz olduğundan dolayı görüntü satır satır okunup işlenmiştir. Görüntü karesinden tek geçişte her piksel etiketlenmiş ve bağlantılı pikseller birleştirilerek her blobun alanı, sınırları ve ağırlık merkezi hesaplanmıştır. Bu şekilde PL-PS yapılarının bir arada kullanılmasına imkân sağlayacak CCL algoritmasının uygulanması için altyapı sağlanmıştır. İlerde yapılacak çalışmalarda blob tespiti işlemi ZYNQ yapısının PS ve PL kısımlarına uygulanarak verimli bir sistem geliştirilmesi hedeflenmektedir.
- 7 November 2024
- Published by Wiley in Journal of Food Process Engineering
- Vol. 47 (11)
Autoencoder‐Based Eggshell Crack Detection Using Acoustic Signal
Breaks or cracks in eggshells offer substantial food safety issues. Bacteria and viruses, in particular, are more likely to enter the egg through breaks and cracks, increasing the risk of food poisoning. Furthermore, deformations in the shell may compromise the integrity of the protective shell, exposing the egg to more external variables and causing it to lose freshness and decay faster. To reduce such hazards, this research created an innovative crack detection system based on an autoencoder (AE) that uses acoustic signals from eggshells. A system that creates an acoustic effect by hitting the eggshell without damaging it was designed, and these effects were recorded through a microphone. Acoustic signal data of size 1 × 1000 was fed into k nearest neighbor (kNN), decision tree (DT), and support vector machine (SVM) classifiers. AE was employed to reduce data size in order to accommodate the raw data's unique features. This AE model, which reduces data size, was used with many classifiers and was able to accurately distinguish between intact and cracked eggs. The built AE‐based classifier model completed the classification procedure with 100% accuracy, including microcracks that are invisible to the naked eye.
- 7 November 2024
- Published by Wiley in Journal of Food Process Engineering
- Vol. 47 (11)
Autoencoder‐Based Eggshell Crack Detection Using Acoustic Signal
Breaks or cracks in eggshells offer substantial food safety issues. Bacteria and viruses, in particular, are more likely to enter the egg through breaks and cracks, increasing the risk of food poisoning. Furthermore, deformations in the shell may compromise the integrity of the protective shell, exposing the egg to more external variables and causing it to lose freshness and decay faster. To reduce such hazards, this research created an innovative crack detection system based on an autoencoder (AE) that uses acoustic signals from eggshells. A system that creates an acoustic effect by hitting the eggshell without damaging it was designed, and these effects were recorded through a microphone. Acoustic signal data of size 1 × 1000 was fed into k nearest neighbor (kNN), decision tree (DT), and support vector machine (SVM) classifiers. AE was employed to reduce data size in order to accommodate the raw data's unique features. This AE model, which reduces data size, was used with many classifiers and was able to accurately distinguish between intact and cracked eggs. The built AE‐based classifier model completed the classification procedure with 100% accuracy, including microcracks that are invisible to the naked eye.
- 30 June 2022
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 26 (3) , 579-589
Artificial Intelligence Based Determination of Cracks in Eggshell Using Sound Signals
Although the egg is a cheap food source, it is one of the valuable nutritional sources for people because of its rich nutritional values. It is also among the most consumed foods in daily nutrition. With the increase in egg production, it is very difficult to collect them with the human power in the egg production farms, to classify them according to their weights and to separate the defective (dirty and broken) eggs. Therefore, the mechanization has become a necessity in large capacity production farms. Cracks and fractures may occur in the egg shell as a result of exposure to external factors such as the transportation of eggs. The cracks or fractures that are formed leave the egg vulnerable to disease-causing micro-organisms. Before the egg sorting and packing, the broken and cracked eggs must be separated. This process is commonly carried out with manpower by which it is very difficult to obtain the necessary efficiency. In this study, the egg crack detection was performed by using Support Vector Machines (SVM) and Artificial Neural Network (ANN). As a result of the application of studied methods, the accuracy values of crack detection process were 0.99 for ANN and 1 for SVM. In addition, a data acquisition and processing program was developed in LABVIEW environment to detect cracks in real time.
- 30 June 2022
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 26 (3) , 579-589
Artificial Intelligence Based Determination of Cracks in Eggshell Using Sound Signals
Although the egg is a cheap food source, it is one of the valuable nutritional sources for people because of its rich nutritional values. It is also among the most consumed foods in daily nutrition. With the increase in egg production, it is very difficult to collect them with the human power in the egg production farms, to classify them according to their weights and to separate the defective (dirty and broken) eggs. Therefore, the mechanization has become a necessity in large capacity production farms. Cracks and fractures may occur in the egg shell as a result of exposure to external factors such as the transportation of eggs. The cracks or fractures that are formed leave the egg vulnerable to disease-causing micro-organisms. Before the egg sorting and packing, the broken and cracked eggs must be separated. This process is commonly carried out with manpower by which it is very difficult to obtain the necessary efficiency. In this study, the egg crack detection was performed by using Support Vector Machines (SVM) and Artificial Neural Network (ANN). As a result of the application of studied methods, the accuracy values of crack detection process were 0.99 for ANN and 1 for SVM. In addition, a data acquisition and processing program was developed in LABVIEW environment to detect cracks in real time.
- 28 June 2022
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
- Vol. 23 (2) , 161-172
THE DETECTION OF EGGSHELL CRACKS USING DIFFERENT CLASSIFIERS
Chicken eggs, which are widely consumed in daily life due to their rich nutritional values, are also used in many products. The increasing need for eggs must be met quickly for various circumstances. Eggs are subjected to various impacts and shaken from production to packaging. In some cases, these effects cause an eggshell to crack. While these cracks are sometimes visible, they are sometimes micro-sized and cannot be seen. The cracks on the egg allow harmful micro-organisms to spoil the egg in a short time. In this study, acoustic signals generated by a mechanical effect to the eggs were recorded for 0.2 seconds at 50 kHz sampling frequency using a microphone. To determine the active part in the collected acoustic signal data, a clipping process was implemented by a thresholding process. Thus, the exactly correct moment of mechanical contact on the eggshell was easily detected. After passing the determined threshold value, statistical parameters such as min, max, difference, mean, standard deviation, skewness and kurtosis were extracted from the data obtained, and 7-dimensional feature vectors were created. Finally, the Common Vector Approach (CVA) is applied on the extracted feature vectors, 100% success rate has been achieved for the test data set. The ANN and SVM classifiers in where the same feature vectors are treated were used for the comparison purpose, and exactly the same classification rates are attained; however, the less number of eggs are tested with the ANN and SVM classifiers in the same amount of time. With the proposed mechanical system and classification methodology, it takes about 0.2008 seconds to determine whether the shells of eggs are cracked/intact. Therefore, the proposed combination of the feature vectors based on statistical features and CVA as a classifier for the detection of cracks on eggshells is notably appropriate especially for industrial applications in terms of speed and accuracy aspects.
- 28 June 2022
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
- Vol. 23 (2) , 161-172
THE DETECTION OF EGGSHELL CRACKS USING DIFFERENT CLASSIFIERS
Chicken eggs, which are widely consumed in daily life due to their rich nutritional values, are also used in many products. The increasing need for eggs must be met quickly for various circumstances. Eggs are subjected to various impacts and shaken from production to packaging. In some cases, these effects cause an eggshell to crack. While these cracks are sometimes visible, they are sometimes micro-sized and cannot be seen. The cracks on the egg allow harmful micro-organisms to spoil the egg in a short time. In this study, acoustic signals generated by a mechanical effect to the eggs were recorded for 0.2 seconds at 50 kHz sampling frequency using a microphone. To determine the active part in the collected acoustic signal data, a clipping process was implemented by a thresholding process. Thus, the exactly correct moment of mechanical contact on the eggshell was easily detected. After passing the determined threshold value, statistical parameters such as min, max, difference, mean, standard deviation, skewness and kurtosis were extracted from the data obtained, and 7-dimensional feature vectors were created. Finally, the Common Vector Approach (CVA) is applied on the extracted feature vectors, 100% success rate has been achieved for the test data set. The ANN and SVM classifiers in where the same feature vectors are treated were used for the comparison purpose, and exactly the same classification rates are attained; however, the less number of eggs are tested with the ANN and SVM classifiers in the same amount of time. With the proposed mechanical system and classification methodology, it takes about 0.2008 seconds to determine whether the shells of eggs are cracked/intact. Therefore, the proposed combination of the feature vectors based on statistical features and CVA as a classifier for the detection of cracks on eggshells is notably appropriate especially for industrial applications in terms of speed and accuracy aspects.