MCMeifeng Cai

Meifeng Cai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Meifeng Cai has a total of 99 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Novel LOF–KNN–Bessel Approach for Optimizing and Predicting Slope Deformation Monitoring Data: A Case Study of the Shilu Iron Mine

    by Chi Ma, Ziming Chen, Mo Chen, Qiangying Ma, Peitao Wang, Meifeng Cai, Luqiang Lin

    Slopes transitioning from open-pit to underground mining typically exhibit heterogeneous and nonlinear deformation characteristics. Under complex environmental disturbances, monitoring data are often affected by high noise and outliers, making it difficult to accurately capture critical deformation characteristics and posing challenges for landslide early warning and safety assessment. Therefore, it is necessary to develop a high-precision data optimization technique suitable for complex, high-noise monitoring time series data to improve slope stability evaluation and the robustness of prediction algorithms. Based on slope deformation monitoring data from the Hainan Shilu Iron Mine, the multi-type, nonlinear, and alternating acceleration-deceleration patterns of deformation time series data were analyzed, and the performances of multiple anomaly detection and interpolation compensation algorithms were compared. The results show that the Local Outlier Factor (LOF) and K-Nearest Neighbors (KNN) algorithms achieve better performance in processing noisy and dynamically varying time series data based on comparative evaluations of detection accuracy and interpolation error. Furthermore, a Bessel function-based denoising technique was proposed for landslide monitoring systems. This technique effectively filters high-frequency noise while preserving the main characteristics of the data and outperforms conventional methods, including the Moving Average Method (MAM), Triple Exponential Smoothing (TES), and Least Squares Method (LSM). The proposed technique, integrating LOF-based anomaly detection, KNN-based interpolation compensation, and Bessel function denoising, can effectively process slope deformation monitoring data characterized by multi-type, nonlinear, and alternating acceleration-deceleration patterns. Engineering application at the Hainan Shilu Iron Mine demonstrated that the proposed technique improves data quality and model prediction performance, providing valuable support for slope stability analysis and disaster early warning systems in slopes transitioning from open-pit to underground mining.

  • Open Access

    In Situ Stress Measurement and Field Inversion in Deep Surrounding Rock

    by Zhilou Feng, Qifeng Guo, Meifeng Cai, Siying Wu, Qingwen Yan, Xianquan Lei, Fei Li

    The in situ stress state of deep surrounding rock is critically important for mine safety and resource extraction. This study focuses on a lead–zinc mine in Yunnan Province, China, with the objective of characterizing the distribution of the deep in situ stress field. A self-developed digital wireless acquisition system for in situ stress measurement with dual temperature compensation was emplo6yed to conduct measurements at eight underground points. Based on the measured data, the in situ stress field was inverted using the finite difference method combined with multiple linear regression, and a three-dimensional geological model of the mining area was established. The results indicate that the stress field is predominantly governed by horizontal tectonic stress, with the principal stresses showing an approximately linear increase with depth. The average relative error between the inverted and measured stress field values was 7.74%. Finally, stress parameters at key underground locations derived from the inversion model were applied in numerical simulations, providing data support for the engineering design and safety assessment in deep mining of this lead–zinc mine.

  • Open Access

    Rock Cutting and Crack Propagation of Jointed Rock Mass Within Rough Fractures Based on Point-Splitting Process

    by Guoye Jing, Hao Huang, Peitao Wang, Meifeng Cai

    The rock is the direct object of disc cutter rock-breaking engineering. It contains natural joint surface. To investigate the influence of joint-surface roughness on the rock-breaking process. The hob model is created using AutoCAD software. The single- and twin-hob rock-breaking processes in intact rocks are simulated with PFC (Particle Flow Code) software. Furthermore, a rough joint network model is established based on MATLAB platform. The influence of joint-surface roughness on failure mode, crack propagation, and rock-breaking load is examined. The results reveal that cutter spacing in intact rock markedly governs the trends of rock-breaking load and crack count. The damage zone extends from the disc cutter–rock contact surface into the specimen interior. The rock-breaking process is mainly dominated by shear cracks. Fracturing of the rock mass occurs along the structural plane, and the force chain and crack propagation mainly distribute through tensile cracks. The initial structural plane of failure gradually penetrates the rock mass surface, resulting in the failure zone development. While considering joint roughness, the RDFN (Rough Discrete Fractures Network) model exhibits higher disc cutter contact force than the DFN (Discrete Fracture Network) model. Throughout the rock-breaking period, both RDFN and DFN models intersect in the number of cracks, but the difference between the two models remains significant. The contact force of the cutter in the RDFN and DFN models differs from that in whole rock. These findings offer a useful reference for elucidating the hob-breaking mechanism in jointed rock masses.

  • Open Access

    Material Behavior and Computational Validation of Deep CO2 Closed-Loop Geothermal Systems in Carbonate Reservoirs

    by Xinghui Wu, Peng Li, Meifeng Cai, Tingting Jiang, Bolin Mu, Wanlei Su, Min Wang, Chunxiao Li

    Closed-loop geothermal systems (CLGSs) avoid groundwater production and offer stable deep heat supply, but their long-term performance hinges on reliable coupling between the wellbore, the near-well interface and the surrounding formation. Using the D22 well in the Xiongan New Area (deep carbonate reservoir), we built a three-domain thermo-hydraulic framework that updates CO2 properties with temperature and pressure and explicitly accounts for wellbore-formation thermal resistance. Two geometries (U-tube and single-well coaxial) and two working fluids (CO2 and water) were compared and optimized under field constraints. With the coaxial configuration, CO2 delivers an average thermal power of 186.3 kW, exceeding that of water by 44.9%, while the fraction of wellbore heat loss drops by 3–5%. Under field-matched conditions, the predicted outlet temperature (76.8 °C) agrees with the measured value (77.2 °C) within 0.52%, confirming the value of field calibration for parameter transferability. Long-term simulations indicate that after 30 years of continuous operation the outlet temperature decline remains 2, outperforming water and implying better reservoir utilization and supply stability. Sensitivity and Pareto analyses identify a practical operating window, i.e., flow velocity of 0.9–1.1 m s−1 and depth of 3000–3500 m, favoring the single-well coaxial + CO2 scheme. These results show how field-calibrated modeling narrows uncertainty and yields implementable guidance on geometry, operating conditions, and wellbore insulation strategy. This study provides quantitative evidence that CO2-CLGSs in deep carbonate formations can simultaneously increase thermal output and limit long-term decline, supporting near-term engineering deployment.


  • Open Access

    Repurposing deep closed mines as seismic forecasting research platforms

    by Peng Li, Chenyu Tang, Yatao Li, Yuezheng Zhang, Mostafa Gorjian, Meifeng Cai

    Seismic forecasting remains constrained by surface noise and low spatial resolution, limiting reproducible predictions. Although deep borehole stations and underground laboratories improve conditions, they face high costs, sparse coverage, and narrow disciplinary scope. In this work, the strategic reuse of deep closed mines as seismic forecasting laboratories was evaluated. Closed mines, abundant and deep with extensive tunnels and reusable infrastructure, provide ideal low-noise, near-source environments for scalable observation networks. They can lower construction costs, enable simultaneous monitoring of natural and induced earthquakes, and support comparative studies of source mechanisms and forecasting methods. Key challenges include processing massive data volumes, integrating multi-source information, and ensuring equipment reliability in harsh environments. Future directions emphasize building three-dimensional, multiphysics monitoring networks, advancing interdisciplinary and international collaboration, and developing an integrated “observation–warning–prevention” platform. Repurposing closed mines not only expands underground space utilization but also offers a potential paradigm shift in seismic monitoring, providing a novel pathway to overcome longstanding forecasting bottlenecks. Document Type: Perspective Cited as: Li, P., Tang, C., Li, Y., Zhang, Y., Gorjian, M., Cai, M. Repurposing deep closed mines as seismic forecasting research platforms. Advances in Geo-Energy Research, 2025, 18(1): 1-6. https://doi.org/10.46690/ager.2025.10.01


  • Open Access

    Radar Monitoring and Numerical Simulation Reveal the Impact of Underground Blasting Disturbance on Slope Stability

    by Chi Ma, Zhan He, Peitao Wang, Wenhui Tan, Qiangying Ma, Cong Wang, Meifeng Cai, Yichao Chen

    Underground blasting vibrations are a critical factor influencing the stability of mine slopes. However, existing studies have yet to establish a quantitative relationship or clarify the underlying mechanisms linking blasting-induced vibrations and slope deformation. Taking the Shilu Iron Mine as a case study, this research develops a dynamic mechanical response model of slope stability that accounts for blasting loads. By integrating slope radar remote sensing data and applying the Pearson correlation coefficient, this study quantitatively evaluates—for the first time—the correlation between underground blasting activity and slope surface deformation. The results reveal that blasting vibrations are characterized by typical short-duration, high-amplitude pulse patterns, with horizontal shear stress identified as the primary trigger for slope shear failure. Both elevation and lithological conditions significantly influence the intensity of vibration responses: high-elevation areas and structurally loose rock masses exhibit greater dynamic sensitivity. A pronounced lag effect in slope deformation was observed following blasting, with cumulative displacements increasing by 10.13% and 34.06% at one and six hours post-blasting, respectively, showing a progressive intensification over time. Mechanistically, the impact of blasting on slope stability operates through three interrelated processes: abrupt perturbations in the stress environment, stress redistribution due to rock mass deformation, and the long-term accumulation of fatigue-induced damage. This integrated approach provides new insights into slope behavior under blasting disturbances and offers valuable guidance for slope stability assessment and hazard mitigation.


  • Open Access

    Influence of Water Immersion on Coal Rocks and Failure Patterns of Underground Coal Pillars Considering Strength Reduction

    by Haihua Zhu, Peitao Wang, Kewei Zhang, Yijun Gao, Zhenwu Qi, Meifeng Cai

    The long-term immersion of coal rock may affect its mechanical properties and failure modes, potentially impacting the stability of coal pillars. This work aims to investigate the influence of the immersion duration on the mechanical properties and fracture evolution processes of coal, employing acoustic emission detection and the digital image correlation (DIC) method. The work focuses on the weakening law of the coal pillar dam in contact with water and obtains a model of the strength deterioration after different periods of water immersion. The stress–strain curves of coal specimens with varying immersion durations are obtained. The results show that the peak absorption rate of coal samples immersed in water transpires within 24 h, with fundamental saturation being achieved at between 25 and 30 days at saturation moisture content of 1.97%. The specimen’s compressive stress after being immersed in water for 7 days is 3.34 MPa, with strain of 0.18%. The cracking stress is 15.60 MPa, with strain of 0.54%. The peak stress is recorded at 27.65 MPa, with strain of 0.92%. The complete rupture stress measures 23.37 MPa, with the maximum strain at 0.95%. During the yielding stage, the specimen has the highest strain increment of 0.38%. Short-term immersion brings about an increase in the coal sample’s plasticity, exhibiting a relatively minor softening impact of water, resulting in comparatively intact fragmentation and modest breakage. A negative exponential function relationship is observed between the compressive strength of coal and the immersion duration. The mechanical reduction relationship is utilized to analyze the failure patterns of coal pillars in underground reservoirs. With prolonged water immersion, the damage area expands to include the coal pillars and the surrounding rock of the excavation area.


  • Open Access

    Mechanical Behavior and Fracture Evolution of Artificial Rock Specimens Within 3D-Printed Fractures

    by Yijun Gao, Peitao Wang, Xingwang Fan, Qingru Liu, Zhenwu Qi, Meifeng Cai

    Coal rock is characterized by numerous cracks, which significantly impact its mechanical properties, such as fracture evolution and strength. In this study, various fracture network models were created using three-dimensional (3D) printing technology. Employing rigid adhesive and different proportions of coal powder, coal-like samples with intricate fracture networks were successfully fabricated. To replicate the mechanical properties of natural coal rocks, uniaxial compression tests were conducted to investigate the mechanical characteristics and failure modes of samples with different coal powder ratios. Additionally, the mechanical response of samples with discrete fracture network (DFN) models was evaluated after freezing treatment. Findings revealed that increasing the coal powder content enhanced the strength of the samples, whereas the introduction of the DFN model reduced their compressive strength. Samples containing the DFN model predominantly exhibited longitudinal fractures as their failure mode, contrasting with the shear fractures observed in the solid model samples. Furthermore, under low-temperature conditions, the artificial specimens exhibited a distinct trend, where brittleness increased proportionally with coal powder content, a phenomenon attributed to the influence of AB adhesive. After applying freezing treatment to DFN model coal-like samples, stress–strain curves resembling those of actual coal rocks were observed, along with a slightly reduced compressive strength and a brittle failure mode characterized by oblique shear failure.

  • Open Access

    Contemporary stress state in the Zhao–Ping metallogenic belt, eastern China, and its correlation to regional geological tectonics

    by Peng Li, Yan Liu, Meifeng Cai, Shengjun Miao, Yuan Li, Yunfeng Wu, Mostafa Gorjian

    In this article, the contemporary stress state of the Zhao–Ping metallogenic belt in eastern China was revealed using overcoring and hydraulic fracturing stress data, the relation between the stress field and geological tectonics was discussed, and the stability of regional faults under the present-day stress environment was evaluated. The results indicate that the stress level is considerably high, and the distribution of stress intensity is uneven. The stress regime is primarily characterized by σ H > σ v > σ h. The σ H orientation is well-oriented in the WNW–ESE, which is roughly identical to other stress indicators. Moreover, the σ H direction reflected by joint strikes and inferred based on the fault characteristics agrees fairly with the identified stress orientation. The modern stress field basically inherited the tectonic stress field of the Yanshanian and Himalayan periods but is principally dominated by the Himalayan period. Additionally, the calculated µ m ranges from 0.2 to 0.7, indicating that the possibility of shallow faults across this area being reactivated and experiencing shear failure is small overall under the current stress conditions. µ m = 0.2 and 0.5 are suggested as the lower and upper limits for predicting and analyzing future fault activity in the area, respectively.