Christian Camus
Research Subjects
Christian Camus has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Christoph Joseph Brabec
Institute of Materials for Electronics and Energy Technology (i‐MEET) Department of Materials Science and Engineering Friedrich‐Alexander‐Universität Erlangen‐Nürnberg Erlangen Germany
5 shared publications Jens Hauch
4 shared publicationsChristoph J. Brabec
Materials for Electronics and Energy Technology (i-MEET), Friedrich-Alexander-Universität Erlangen-Nürnberg 2 , Martenstraße 7, 91058 Erlangen, Germany
3 shared publications- Jens Hauch
Department of High Throughput Methods in Photovoltaics Forschungszentrum Jülich GmbH Helmholtz-Institute Erlangen-Nürnberg (HI ERN) Immerwahrstraße 2 91058 Erlangen Germany
3 shared publications - Sophie E. Gledhill
Helmholtz Zentrum, Glienickerstraße 100, 14107 Berlin, Germany
3 shared publications Claudia Buerhop
2 shared publications
Latest Publications
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 16 (1) , 33-38
New Rapid Method for Optical Nondestructive Determination of the Degree of Crosslinking of PV Module Encapsulants
The degree of crosslinking in encapsulants is a critical parameter in photovoltaic (PV) module production, significantly influencing module performance and reliability. Despite its importance, the industry-standard Soxhlet extraction method for assessing crosslinking is offline, time-intensive, and unsuitable to implement for real-time process monitoring. This study explores the application of near-infrared (NIR) spectroscopy as a faster, nondestructive alternative for determining encapsulant crosslinking. Test laminates using an ethylene vinyl acetate (EVA) encapsulant with varying crosslinking times were analyzed using both Soxhlet extraction and NIR spectroscopy. The NIR spectra were processed using multivariate data analysis methods for qualitative classification and quantitative prediction. The classification model demonstrated clear separation between encapsulants with high and low degrees of crosslinking. The prediction model achieved a high accuracy prediction of the degree of crosslinking. These findings highlight the potential of NIR spectroscopy for rapid, inline classification and quantification of encapsulant crosslinking. Future work will expand the calibration models to include polyolefin (POE) and co-extruded POE–EVA encapsulants to verify robustness across different chemistries, and optimizing measurement setups to accommodate double-glass module designs.
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 16 (1) , 33-38
New Rapid Method for Optical Nondestructive Determination of the Degree of Crosslinking of PV Module Encapsulants
The degree of crosslinking in encapsulants is a critical parameter in photovoltaic (PV) module production, significantly influencing module performance and reliability. Despite its importance, the industry-standard Soxhlet extraction method for assessing crosslinking is offline, time-intensive, and unsuitable to implement for real-time process monitoring. This study explores the application of near-infrared (NIR) spectroscopy as a faster, nondestructive alternative for determining encapsulant crosslinking. Test laminates using an ethylene vinyl acetate (EVA) encapsulant with varying crosslinking times were analyzed using both Soxhlet extraction and NIR spectroscopy. The NIR spectra were processed using multivariate data analysis methods for qualitative classification and quantitative prediction. The classification model demonstrated clear separation between encapsulants with high and low degrees of crosslinking. The prediction model achieved a high accuracy prediction of the degree of crosslinking. These findings highlight the potential of NIR spectroscopy for rapid, inline classification and quantification of encapsulant crosslinking. Future work will expand the calibration models to include polyolefin (POE) and co-extruded POE–EVA encapsulants to verify robustness across different chemistries, and optimizing measurement setups to accommodate double-glass module designs.
- 30 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 10 (3) , 898-904
Quantitative Analysis of the Separate Influences of Material Composition and Local Defects on theVocof PV Devices: An Exemplary Study on CIGS
A lot of effort is required in order to close the efficiency gap between laboratory record Cu(In,Ga)Se $_{2}$ (CIGS) solar cells and commercially produced modules. An obstacle easily overlooked is the fact that reduced module performance may have multiple root causes. Here, we show how to isolate two main factors that influence the open circuit voltage (V $_\text{oc}$ ) of photovoltaic devices, the material composition and the local defects, here shunts in particular, i.e., regions of significantly lowered resistivity. In order to characterize the material composition, we used electroluminescence spectroscopy. Additionally, we investigated the effect of local defects on the V $_\text{oc}$ , by the use of thermography. Which of both factors dominates the resulting V $_\text{oc}$ depends on the insolation intensity under which the device is operated. We established a model in order to estimate the V $_\text{oc}$ as a function of the luminescence peak wavelength, the quantification of the thermal hot spots caused by local defects, and the insolation intensity. Subsequently, we investigated how these factors affect the electrical conversion efficiency of the device. The combination of these two measurement techniques results in a more conclusive evaluation of the electrical parameters, thereby enabling an improved quality assessment to allow a successive process optimization. This approach is also applicable to other thin film PV technologies such as perovskite and organic solar cells.- 30 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 10 (3) , 898-904
Quantitative Analysis of the Separate Influences of Material Composition and Local Defects on theVocof PV Devices: An Exemplary Study on CIGS
A lot of effort is required in order to close the efficiency gap between laboratory record Cu(In,Ga)Se $_{2}$ (CIGS) solar cells and commercially produced modules. An obstacle easily overlooked is the fact that reduced module performance may have multiple root causes. Here, we show how to isolate two main factors that influence the open circuit voltage (V $_\text{oc}$ ) of photovoltaic devices, the material composition and the local defects, here shunts in particular, i.e., regions of significantly lowered resistivity. In order to characterize the material composition, we used electroluminescence spectroscopy. Additionally, we investigated the effect of local defects on the V $_\text{oc}$ , by the use of thermography. Which of both factors dominates the resulting V $_\text{oc}$ depends on the insolation intensity under which the device is operated. We established a model in order to estimate the V $_\text{oc}$ as a function of the luminescence peak wavelength, the quantification of the thermal hot spots caused by local defects, and the insolation intensity. Subsequently, we investigated how these factors affect the electrical conversion efficiency of the device. The combination of these two measurement techniques results in a more conclusive evaluation of the electrical parameters, thereby enabling an improved quality assessment to allow a successive process optimization. This approach is also applicable to other thin film PV technologies such as perovskite and organic solar cells.- 1 August 2019
- Published by Elsevier in Solar Energy
- Vol. 188, 1134-1145
Site-specific assessment of mechanical loads on photovoltaic modules from meteorological reanalysis data
- 1 August 2019
- Published by Elsevier in Solar Energy
- Vol. 188, 1134-1145
Site-specific assessment of mechanical loads on photovoltaic modules from meteorological reanalysis data
- 27 June 2019
- Published by Walter de Gruyter GmbH in Zeitschrift für Naturforschung A
- Vol. 74 (8) , 645-653
Quantitative Assessment of the Influence of Camera and Parameter Choice for Outdoor Electroluminescence Investigations of Silicon Photovoltaic Panels
With the spread of photovoltaics (PV) and increasing diversity in PV panel technology, quantitative comparison of the modules is highly desirable for consistent on-site quality assessment. Electroluminescence imaging reveals many defects, such as macroscopic crystal or electrical contact defects, but quantitative comparison outside the laboratory without controlled environment is still difficult, especially for different detector technologies. Here, we show how this problem can be addressed by adding reference spots in the module area: One passive dark spot and an active bright spot composed of a high-power back-contacted silicon PV cell. Those reference spots are used to evaluate the module’s electroluminescence signal under different environmental conditions and to establish comparable results. Additionally, the comparison of images acquired with different camera technology detectors, such as silicon and InGaAs, is realised for signal levels.
- 27 June 2019
- Published by Walter de Gruyter GmbH in Zeitschrift für Naturforschung A
- Vol. 74 (8) , 645-653
Quantitative Assessment of the Influence of Camera and Parameter Choice for Outdoor Electroluminescence Investigations of Silicon Photovoltaic Panels
With the spread of photovoltaics (PV) and increasing diversity in PV panel technology, quantitative comparison of the modules is highly desirable for consistent on-site quality assessment. Electroluminescence imaging reveals many defects, such as macroscopic crystal or electrical contact defects, but quantitative comparison outside the laboratory without controlled environment is still difficult, especially for different detector technologies. Here, we show how this problem can be addressed by adding reference spots in the module area: One passive dark spot and an active bright spot composed of a high-power back-contacted silicon PV cell. Those reference spots are used to evaluate the module’s electroluminescence signal under different environmental conditions and to establish comparable results. Additionally, the comparison of images acquired with different camera technology detectors, such as silicon and InGaAs, is realised for signal levels.
- 18 September 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10766, 107660K
High through-put, outdoor characterization of silicon photovoltaic modules by moving electroluminescence measurements
Fast and non-destructive quality control tools are important to assess the reliability of photovoltaic plants. On-site inspection is essential to minimize the risk of module damage and electrical yield losses. This may only be achieved by using highly sensitive imaging techniques such as luminescence or infrared thermography imaging. Nowadays, electroluminescence is used to detect defects such as local cell changes, series resistances and shunts in solar cells and modules which can cause electrical losses. However, the drawback of this method is the relatively low measurement throughput. To increase the throughput InGaAs cameras with a resolution of 640 × 512 pixels are used, for which low integration times are possible to acquire electroluminescence images. For such low integration times even moving image acquisition and movie recording are feasible to detect the mentioned defects. In this paper, an outdoor electroluminescence setup is presented for mobile handheld recording. Experiments showed that 5 ms integration time is a good compromise between low contrasts for lower integration times and motion blurring for higher integration times. The camera prototype has an onboard computer to avoid image transmission losses. It was controlled and visualized over Wi-Fi and remote desktop connection. The energy supply was provided from LiPo-batteries for improved mobility. In comparison to conventional electroluminescence measurements we can decrease the measurement time of a 20 module string from 5 min to 20 s.
- 18 September 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10766, 107660K
High through-put, outdoor characterization of silicon photovoltaic modules by moving electroluminescence measurements
Fast and non-destructive quality control tools are important to assess the reliability of photovoltaic plants. On-site inspection is essential to minimize the risk of module damage and electrical yield losses. This may only be achieved by using highly sensitive imaging techniques such as luminescence or infrared thermography imaging. Nowadays, electroluminescence is used to detect defects such as local cell changes, series resistances and shunts in solar cells and modules which can cause electrical losses. However, the drawback of this method is the relatively low measurement throughput. To increase the throughput InGaAs cameras with a resolution of 640 × 512 pixels are used, for which low integration times are possible to acquire electroluminescence images. For such low integration times even moving image acquisition and movie recording are feasible to detect the mentioned defects. In this paper, an outdoor electroluminescence setup is presented for mobile handheld recording. Experiments showed that 5 ms integration time is a good compromise between low contrasts for lower integration times and motion blurring for higher integration times. The camera prototype has an onboard computer to avoid image transmission losses. It was controlled and visualized over Wi-Fi and remote desktop connection. The energy supply was provided from LiPo-batteries for improved mobility. In comparison to conventional electroluminescence measurements we can decrease the measurement time of a 20 module string from 5 min to 20 s.
- 1 March 2018
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 10 (2)
Technology-dependent analysis of the snow melting and sliding behavior on photovoltaic modules
In this study, the snow melting behavior of several photovoltaic technologies, all installed at the same location under identical conditions, is analyzed based on the time-dependent changes of the snow cover, which is extracted from images of a monitoring webcam, for various temperature and irradiation conditions. From this study, conclusions can be drawn for the optimum module technology for a given location with respect to snow-dependent yield losses. In particular, the melting behavior is analyzed regarding its dependence on the ambient temperature and the irradiation level. Finally, the relevance of snow cover-related losses is discussed. The study shows that comparably large frameless modules exhibit the highest snow shedding rates. Hence, they are snow-free for longer periods, thereby increasing their potential for electricity generation in snowy regions. In summary, this paper reveals the beneficial snow removal properties of large frameless modules for snowy areas by applying a novel image processing technique for the determination of the snow-covered area fraction of the modules.
- 1 March 2018
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 10 (2)
Technology-dependent analysis of the snow melting and sliding behavior on photovoltaic modules
In this study, the snow melting behavior of several photovoltaic technologies, all installed at the same location under identical conditions, is analyzed based on the time-dependent changes of the snow cover, which is extracted from images of a monitoring webcam, for various temperature and irradiation conditions. From this study, conclusions can be drawn for the optimum module technology for a given location with respect to snow-dependent yield losses. In particular, the melting behavior is analyzed regarding its dependence on the ambient temperature and the irradiation level. Finally, the relevance of snow cover-related losses is discussed. The study shows that comparably large frameless modules exhibit the highest snow shedding rates. Hence, they are snow-free for longer periods, thereby increasing their potential for electricity generation in snowy regions. In summary, this paper reveals the beneficial snow removal properties of large frameless modules for snowy areas by applying a novel image processing technique for the determination of the snow-covered area fraction of the modules.
- 1 March 2018
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 10 (2) , 021004
Influence of pre-existing damages on the degradation behavior of crystalline silicon photovoltaic modules
In this paper, the influence of pre-existing crystalline damage, such as cracked or broken cells or soldering failures, as they are frequently observed in operating photovoltaic (PV) plants, on the degradation behavior of mono- and polycrystalline silicon PV modules is investigated. In particular, it is analyzed if and to what extent pre-damage introduced prior to lamination propagates upon stress exposure. Therefore, the pre-damaged modules are exposed to various accelerated aging conditions in order to analyze the impact of the pre-damage on the degradation behavior under the respective aging scenario. In order to separate the influence of the pre-damage from composition-induced influences, the choice of materials used in the modules is varied. These investigations reveal that none of the accelerated aging tests causes any change in the pre-existing damage. In fact, the degradation behavior and rate rather depended on the choice of the module components than on the nature of the pre-damage. Finally, these results are compared with indoor and outdoor results obtained from other studies.
- 1 March 2018
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 10 (2) , 021004
Influence of pre-existing damages on the degradation behavior of crystalline silicon photovoltaic modules
In this paper, the influence of pre-existing crystalline damage, such as cracked or broken cells or soldering failures, as they are frequently observed in operating photovoltaic (PV) plants, on the degradation behavior of mono- and polycrystalline silicon PV modules is investigated. In particular, it is analyzed if and to what extent pre-damage introduced prior to lamination propagates upon stress exposure. Therefore, the pre-damaged modules are exposed to various accelerated aging conditions in order to analyze the impact of the pre-damage on the degradation behavior under the respective aging scenario. In order to separate the influence of the pre-damage from composition-induced influences, the choice of materials used in the modules is varied. These investigations reveal that none of the accelerated aging tests causes any change in the pre-existing damage. In fact, the degradation behavior and rate rather depended on the choice of the module components than on the nature of the pre-damage. Finally, these results are compared with indoor and outdoor results obtained from other studies.
- 18 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 8 (1) , 315-321
Utilization of Inverter Operating Point Shifts as a Quality Assessment Tool for Photovoltaic Systems
This paper presents a novel approach for the automated identification of electrically impaired strings in photovoltaic (PV) systems, which is solely based on monitored inverter data. By shifting the inverter operating points of two or more strings to a common voltage level on the direct current side, the effect of defects such as bypassed substrings is actively amplified so that defects can be detected reliably. The presented Common Voltage Test is illustrated using an electrical simulation based on the extended two-diode model. The effectiveness of the proposed approach is demonstrated using real monitoring data of an inverter in a PV power plant in Bavaria, Germany. For validation, electrically defective PV modules within the PV system are identified and located using aerial infrared thermography. Facilitating an automated reliable detection of faulty strings in PV systems, the approach is especially useful for large-scale PV power plants since only the faulty strings need to be examined in greater detail. Consequently, the maintenance becomes more efficient so that the maintenance costs may be reduced significantly.
- 18 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 8 (1) , 315-321
Utilization of Inverter Operating Point Shifts as a Quality Assessment Tool for Photovoltaic Systems
This paper presents a novel approach for the automated identification of electrically impaired strings in photovoltaic (PV) systems, which is solely based on monitored inverter data. By shifting the inverter operating points of two or more strings to a common voltage level on the direct current side, the effect of defects such as bypassed substrings is actively amplified so that defects can be detected reliably. The presented Common Voltage Test is illustrated using an electrical simulation based on the extended two-diode model. The effectiveness of the proposed approach is demonstrated using real monitoring data of an inverter in a PV power plant in Bavaria, Germany. For validation, electrically defective PV modules within the PV system are identified and located using aerial infrared thermography. Facilitating an automated reliable detection of faulty strings in PV systems, the approach is especially useful for large-scale PV power plants since only the faulty strings need to be examined in greater detail. Consequently, the maintenance becomes more efficient so that the maintenance costs may be reduced significantly.
- 10 August 2017
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 26 (1) , 74-85
Technology‐specific yield analysis of various photovoltaic module technologies under specific real weather conditions
In the presented paper, we introduce an approach to rate the performance of modules under specific real weather conditions, since solar modules are rated according to standard test conditions which do not give evidence of the performance under real outdoor conditions. Therefore, we categorize the daily weather at a photovoltaic test site into 7 different climatic‐day classifications and multiple cloud scenarios. Two different approaches to evaluate the cloud conditions were investigated. Furthermore, we use the developed approach to rate the performance of 8 different commercially available photovoltaic modules that have been installed and measured in Germany. The evaluation shows that module properties (eg, temperature coefficient, spectral response, and mechanical construction) have a major influence on the performance of photovoltaic modules under different weather conditions.
- 10 August 2017
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 26 (1) , 74-85
Technology‐specific yield analysis of various photovoltaic module technologies under specific real weather conditions
In the presented paper, we introduce an approach to rate the performance of modules under specific real weather conditions, since solar modules are rated according to standard test conditions which do not give evidence of the performance under real outdoor conditions. Therefore, we categorize the daily weather at a photovoltaic test site into 7 different climatic‐day classifications and multiple cloud scenarios. Two different approaches to evaluate the cloud conditions were investigated. Furthermore, we use the developed approach to rate the performance of 8 different commercially available photovoltaic modules that have been installed and measured in Germany. The evaluation shows that module properties (eg, temperature coefficient, spectral response, and mechanical construction) have a major influence on the performance of photovoltaic modules under different weather conditions.
- 25 March 2015
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 15 (5) , 3597-3602
In Situ Characterization of Nanowire Dimensions and Growth Dynamics by Optical Reflectance
Optical reflectometry is commonly used as an accurate and noninvasive characterization tool when growing planar semiconductor layers. However, thin-film analysis schemes cannot be directly applied to nanowire systems due to their complex optical response. Here, we report on reliable in situ characterization of nanowire growth with high accuracy using optical reflectance spectra for analysis. The method makes it possible to determine the nanowire length, diameter, and growth rate in situ in real time with high resolution. We demonstrate the method’s versatility by using the optical reflectance data for determining nanowire dimensions on both particle-assisted and selective-area grown nanowires. To indicate the full potential of in situ characterization of nanowire synthesis we evaluate the growth dynamics of InP nanowires in the presence of the p-type dopant precursor diethylzinc. We observe that the growth rate is strongly affected by the diethylzinc. At low diethylzinc flows, the growth rate decreases monotonously while higher flows lead to an initially increasing growth rate. From these in situ characterization data, we conclude that the surface migration length of adatom species is affected strongly by the addition of diethylzinc. We believe that this characterization method will become a standard tool for in situ growth monitoring and aid in elucidating the complex growth dynamics often exhibited during nanowire growth.
- 25 March 2015
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 15 (5) , 3597-3602
In Situ Characterization of Nanowire Dimensions and Growth Dynamics by Optical Reflectance
Optical reflectometry is commonly used as an accurate and noninvasive characterization tool when growing planar semiconductor layers. However, thin-film analysis schemes cannot be directly applied to nanowire systems due to their complex optical response. Here, we report on reliable in situ characterization of nanowire growth with high accuracy using optical reflectance spectra for analysis. The method makes it possible to determine the nanowire length, diameter, and growth rate in situ in real time with high resolution. We demonstrate the method’s versatility by using the optical reflectance data for determining nanowire dimensions on both particle-assisted and selective-area grown nanowires. To indicate the full potential of in situ characterization of nanowire synthesis we evaluate the growth dynamics of InP nanowires in the presence of the p-type dopant precursor diethylzinc. We observe that the growth rate is strongly affected by the diethylzinc. At low diethylzinc flows, the growth rate decreases monotonously while higher flows lead to an initially increasing growth rate. From these in situ characterization data, we conclude that the surface migration length of adatom species is affected strongly by the addition of diethylzinc. We believe that this characterization method will become a standard tool for in situ growth monitoring and aid in elucidating the complex growth dynamics often exhibited during nanowire growth.