Ashish Pandharipande
Research Subjects
Research Interests
Ashish Pandharipande has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
D Caicedo
Philips Lighting Research, Eindhoven, The Netherlands
3 shared publications- See Ho Ting
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798
3 shared publications - Sriram Srinivasan
Philips Research, High Tech Campus 36, 5656AE Eindhoven, The Netherlands
3 shared publications Chin Keong Ho
Institute for Infocomm Research, A*STAR, Singapore 138632
2 shared publications- Chin Keong Ho
School of Electrical and Electronic Engineering Nanyang Technological University Singapore
2 shared publications - Kees Janse
Philips Research, High Tech Campus 36, 5656AE Eindhoven, The Netherlands
2 shared publications
Latest Publications
- 21 February 2017
- Published by SAGE Publications in Lighting Research & Technology
- Vol. 50 (5) , 660-680
Sensor-driven, human-in-the-loop lighting control
Smart indoor lighting systems use occupancy and light sensor data to adapt artificial lighting in accordance with changing occupancy and daylight conditions. Such systems can be designed to reduce lighting energy consumption significantly. However, these systems cannot account for individual user preferences at the workplace in real time. We propose a sensor-driven, human-in-the-loop lighting system that incorporates user feedback in addition to occupancy and light sensor inputs. In this system, luminaires transmit unique visible light communication identifier signals. By processing the image captured by a smartphone camera, a user obtains two pieces of information: visible light communication identifiers of luminaires in the vicinity and average image pixel value. A control algorithm is designed that incorporates these user inputs along with occupancy and light sensor inputs to determine the dimming levels of the luminaires to achieve illumination levels acceptable to users. We compare the performance of the proposed lighting control system with a sensor-driven lighting control system in an office test bed.
- 21 February 2017
- Published by SAGE Publications in Lighting Research & Technology
- Vol. 50 (5) , 660-680
Sensor-driven, human-in-the-loop lighting control
Smart indoor lighting systems use occupancy and light sensor data to adapt artificial lighting in accordance with changing occupancy and daylight conditions. Such systems can be designed to reduce lighting energy consumption significantly. However, these systems cannot account for individual user preferences at the workplace in real time. We propose a sensor-driven, human-in-the-loop lighting system that incorporates user feedback in addition to occupancy and light sensor inputs. In this system, luminaires transmit unique visible light communication identifier signals. By processing the image captured by a smartphone camera, a user obtains two pieces of information: visible light communication identifiers of luminaires in the vicinity and average image pixel value. A control algorithm is designed that incorporates these user inputs along with occupancy and light sensor inputs to determine the dimming levels of the luminaires to achieve illumination levels acceptable to users. We compare the performance of the proposed lighting control system with a sensor-driven lighting control system in an office test bed.
- 2 February 2016
- Published by SAGE Publications in Lighting Research & Technology
- Vol. 49 (4) , 446-460
Smart lighting control with workspace and ceiling sensors
We consider energy-efficient indoor lighting control for adapting to daylight and user presence changes. Light sensors located at ceiling luminaires and at workspace desks are used to provide illumination information feedback, along with user presence information from occupancy sensors at ceiling luminaires, to a lighting controller. The light sensors at the workspace transmit information at a lower update rate than the sensors at the ceiling. Using this sensing information, we propose a control method to adapt the dimming levels of the luminaires such that desired illumination levels are achieved at the workspace level. The performance of the proposed method is evaluated in an office lighting testbed.
- 2 February 2016
- Published by SAGE Publications in Lighting Research & Technology
- Vol. 49 (4) , 446-460
Smart lighting control with workspace and ceiling sensors
We consider energy-efficient indoor lighting control for adapting to daylight and user presence changes. Light sensors located at ceiling luminaires and at workspace desks are used to provide illumination information feedback, along with user presence information from occupancy sensors at ceiling luminaires, to a lighting controller. The light sensors at the workspace transmit information at a lower update rate than the sensors at the ceiling. Using this sensing information, we propose a control method to adapt the dimming levels of the luminaires such that desired illumination levels are achieved at the workspace level. The performance of the proposed method is evaluated in an office lighting testbed.
- 8 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 15 (9) , 4888-4898
Indoor Granular Presence Sensing and Control Messaging With an Ultrasonic Circular Array Sensor
Providing automated granular control of lighting, along with user-driven control, results in an energy-efficient smart lighting system design while catering to personal occupant preferences. Two functional ingredients in such a system are: sensing that provides granular information on occupant location and a communication system to transmit control messages from a user. In this paper, we consider an ultrasonic circular array sensor that provides the dual functionality of granular occupant sensing and a communication receiver for user control transmissions. A ceiling-mounted sensor configuration with a colocated ultrasonic transmitter and array receiver is considered. To perform presence sensing, this transmitter sends periodic bursts of sinusoidal pulses that, upon reflection from the environment, are received at the array sensor. The echoes are processed to obtain estimates of range, azimuth, and elevation angles corresponding to possible occupant movements. A Kalman filter based on a near constant velocity model is used for target tracking. The resulting occupant location is used for energy-efficient lighting control. A user may in addition control lamps in its vicinity by sending messages at ultrasonic frequency, which are processed by the receiver array, and used to further adapt requested parameters of the lighting system. The proposed sensing and messaging solution is tested in an indoor office space with an eight-element receiver array sensor prototype.
- 8 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 15 (9) , 4888-4898
Indoor Granular Presence Sensing and Control Messaging With an Ultrasonic Circular Array Sensor
Providing automated granular control of lighting, along with user-driven control, results in an energy-efficient smart lighting system design while catering to personal occupant preferences. Two functional ingredients in such a system are: sensing that provides granular information on occupant location and a communication system to transmit control messages from a user. In this paper, we consider an ultrasonic circular array sensor that provides the dual functionality of granular occupant sensing and a communication receiver for user control transmissions. A ceiling-mounted sensor configuration with a colocated ultrasonic transmitter and array receiver is considered. To perform presence sensing, this transmitter sends periodic bursts of sinusoidal pulses that, upon reflection from the environment, are received at the array sensor. The echoes are processed to obtain estimates of range, azimuth, and elevation angles corresponding to possible occupant movements. A Kalman filter based on a near constant velocity model is used for target tracking. The resulting occupant location is used for energy-efficient lighting control. A user may in addition control lamps in its vicinity by sending messages at ultrasonic frequency, which are processed by the receiver array, and used to further adapt requested parameters of the lighting system. The proposed sensing and messaging solution is tested in an indoor office space with an eight-element receiver array sensor prototype.
- 16 April 2014
- Published by SAGE Publications in Lighting Research & Technology
- Vol. 47 (4) , 389-404
Smart modular lighting control system with dual-beam luminaires
We consider a smart lighting system with multiple dual-beam luminaires, with co-located occupancy and light sensors. A dual-beam luminaire emits a hollow beam and a narrow beam, suitable, respectively, for providing ambient and task lighting both controllable independently. We consider an occupancy- and daylight-adaptive lighting system, wherein the luminaire controller determines the dimming levels of the dual beams such that the lighting system provides a desired illuminance based on local occupancy and light sensor inputs. We present a method for calibrating the light sensors to obtain control set-points and a controller design so that the set-points may be attained. The proposed system performance is compared with a standard-beam lighting system using lighting simulations. We find that the dual-beam lighting system provides higher illumination and power saving in comparison to the standard-beam lighting system, given the additional degree of freedom provided by the two optical beams.
- 16 April 2014
- Published by SAGE Publications in Lighting Research & Technology
- Vol. 47 (4) , 389-404
Smart modular lighting control system with dual-beam luminaires
We consider a smart lighting system with multiple dual-beam luminaires, with co-located occupancy and light sensors. A dual-beam luminaire emits a hollow beam and a narrow beam, suitable, respectively, for providing ambient and task lighting both controllable independently. We consider an occupancy- and daylight-adaptive lighting system, wherein the luminaire controller determines the dimming levels of the dual beams such that the lighting system provides a desired illuminance based on local occupancy and light sensor inputs. We present a method for calibrating the light sensors to obtain control set-points and a controller design so that the set-points may be attained. The proposed system performance is compared with a standard-beam lighting system using lighting simulations. We find that the dual-beam lighting system provides higher illumination and power saving in comparison to the standard-beam lighting system, given the additional degree of freedom provided by the two optical beams.
- 20 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 14 (1) , 234-243
Distributed Ultrasonic Zoned Presence Sensing System
We present a zoned presence detection system using multiple ultrasonic array sensors. In active mode, sensors transmit consecutive bursts of sinusoidal pulses over a transmission slot in a time-division multiplexed manner. We present a transmission slot synchronization method to maintain assigned transmission slots of each sensor. The proposed method is distributed and does not rely on a central coordinator or unique identifiers for the sensors. In a transmission slot, the corresponding receiver array uses moving target processing on received echoes to derive range and direction-of-arrival, defining a zone. A tracking algorithm is used to make the zoned presence detection more robust. The presented methods are evaluated using ceiling-installed ultrasonic linear array sensors in an experimental office setup.
- 20 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 14 (1) , 234-243
Distributed Ultrasonic Zoned Presence Sensing System
We present a zoned presence detection system using multiple ultrasonic array sensors. In active mode, sensors transmit consecutive bursts of sinusoidal pulses over a transmission slot in a time-division multiplexed manner. We present a transmission slot synchronization method to maintain assigned transmission slots of each sensor. The proposed method is distributed and does not rely on a central coordinator or unique identifiers for the sensors. In a transmission slot, the corresponding receiver array uses moving target processing on received echoes to derive range and direction-of-arrival, defining a zone. A tracking algorithm is used to make the zoned presence detection more robust. The presented methods are evaluated using ceiling-installed ultrasonic linear array sensors in an experimental office setup.
- 30 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 60 (10) , 2861-2871
Cooperate-and-Access Spectrum Sharing with ARQ-Based Primary Systems
We consider spectrum sharing in a cognitive radio network where a secondary system co-exists with an automatic repeat-request (ARQ)-based primary system. A cooperate-and-access spectrum sharing protocol is proposed where the secondary system alternates between cooperation and access modes. In the cooperation mode, the secondary system serves as a relay to assist the primary transmission, and in return accumulates credits. The credits allow the secondary system to gain spectrum access by exploiting the ARQ retransmissions of the primary system. We show analytically that through the proposed credit system, as long as the credits accumulated in cooperation mode compensate for the degradation in primary performance during access mode, an equal or higher average throughput is achieved for the primary system than in the case without spectrum sharing, while providing spectrum access opportunities for the secondary system.
- 30 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 60 (10) , 2861-2871
Cooperate-and-Access Spectrum Sharing with ARQ-Based Primary Systems
We consider spectrum sharing in a cognitive radio network where a secondary system co-exists with an automatic repeat-request (ARQ)-based primary system. A cooperate-and-access spectrum sharing protocol is proposed where the secondary system alternates between cooperation and access modes. In the cooperation mode, the secondary system serves as a relay to assist the primary transmission, and in return accumulates credits. The credits allow the secondary system to gain spectrum access by exploiting the ARQ retransmissions of the primary system. We show analytically that through the proposed credit system, as long as the credits accumulated in cooperation mode compensate for the degradation in primary performance during access mode, an equal or higher average throughput is achieved for the primary system than in the case without spectrum sharing, while providing spectrum access opportunities for the secondary system.
- 27 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 12 (12) , 3438-3445
Disaggregated Daylight–Artificial Light Sensing
Control of lighting systems that adapt to daylight is known to be energy efficient. An underlying challenge in such control is the estimation of daylight level. We consider the problem of disaggregated estimation of the daylight and artificial light levels in a lighting system. To facilitate this disaggregation, the light output from each light source is modulated and the system operates under a carrier sense multiple access with collision avoidance protocol. At the light sensor, the received electrical signal is a superposition of the light contributions from daylight and artificial light sources. We present algorithms to process the sensor signal to estimate the daylight and artificial light levels. An optimum joint least-squares estimator is analyzed and, subsequently, two practical successive estimation algorithms are proposed. The performance of these algorithms is evaluated analytically and validated via experimental results.
- 27 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 12 (12) , 3438-3445
Disaggregated Daylight–Artificial Light Sensing
Control of lighting systems that adapt to daylight is known to be energy efficient. An underlying challenge in such control is the estimation of daylight level. We consider the problem of disaggregated estimation of the daylight and artificial light levels in a lighting system. To facilitate this disaggregation, the light output from each light source is modulated and the system operates under a carrier sense multiple access with collision avoidance protocol. At the light sensor, the received electrical signal is a superposition of the light contributions from daylight and artificial light sources. We present algorithms to process the sensor signal to estimate the daylight and artificial light levels. An optimum joint least-squares estimator is analyzed and, subsequently, two practical successive estimation algorithms are proposed. The performance of these algorithms is evaluated analytically and validated via experimental results.
- 21 March 2012
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 131 (4) , EL348-EL353
Presence detection under optimum fusion in an ultrasonic sensor system
Reliable presence detection is a requirement in energy-efficient occupancy-adaptive indoor lighting systems. A system of multiple ultrasonic sensors is considered for presence detection, and the performance gain from optimum fusion is studied. Two cases are considered wherein an individual sensor determines presence based on (i) local detection by processing echoes at its receiver, and (ii) the optimum Chair–Varshney fusion rule using multiple sensor detection results. The performance gains of using optimum fusion over local detection are characterized under different sensor system configurations and it is shown that improved detection sensitivity is obtained over a larger detection coverage region.
- 21 March 2012
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 131 (4) , EL348-EL353
Presence detection under optimum fusion in an ultrasonic sensor system
Reliable presence detection is a requirement in energy-efficient occupancy-adaptive indoor lighting systems. A system of multiple ultrasonic sensors is considered for presence detection, and the performance gain from optimum fusion is studied. Two cases are considered wherein an individual sensor determines presence based on (i) local detection by processing echoes at its receiver, and (ii) the optimum Chair–Varshney fusion rule using multiple sensor detection results. The performance gains of using optimum fusion over local detection are characterized under different sensor system configurations and it is shown that improved detection sensitivity is obtained over a larger detection coverage region.
- 20 March 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 1 (3) , 177-180
Joint Decision-Making and Power Allocation for One-Bit Feedback Sensor Communications
We consider a sensor communication scenario where a sensor node communicates information to a data sink. To aid the sensor, the data sink transmits channel state information (CSI). To obtain the CSI, however, a fixed receive processing energy is incurred by the sensor node. Given a choice, the sensor node may choose not to obtain the CSI if the receive processing energy does not lead to a larger reduction in the transmit energy. In this paper, we study the tradeoff involved in this choice. Specifically, we design the optimal transmit strategy so that the total expected transmit and receive power of the sensor are minimized subject to a target outage probability. We focus on the case in which the feedback packet conveys one bit of CSI to the sensor nodes. Closed-form expressions of suboptimal solutions are obtained and shown to perform close to the optimal solution.
- 20 March 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 1 (3) , 177-180
Joint Decision-Making and Power Allocation for One-Bit Feedback Sensor Communications
We consider a sensor communication scenario where a sensor node communicates information to a data sink. To aid the sensor, the data sink transmits channel state information (CSI). To obtain the CSI, however, a fixed receive processing energy is incurred by the sensor node. Given a choice, the sensor node may choose not to obtain the CSI if the receive processing energy does not lead to a larger reduction in the transmit energy. In this paper, we study the tradeoff involved in this choice. Specifically, we design the optimal transmit strategy so that the total expected transmit and receive power of the sensor are minimized subject to a target outage probability. We focus on the case in which the feedback packet conveys one bit of CSI to the sensor nodes. Closed-form expressions of suboptimal solutions are obtained and shown to perform close to the optimal solution.