Hasse Fredriksson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hasse Fredriksson has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Arash Safavi Nick
Department of Materials Science and Engineering, KTH Royal Institute of Technology, Stockholm, Sweden
1 shared publication J. Stjerndahl
Casting of Metals, Royal Institute of Technology, SE-100 44 Stockholm, Sweden
1 shared publicationJ. Tinoco
Outokumpu Copper R&D, P.O. Box 594, SE-721 10 Västerås, Sweden
1 shared publicationJessica Elfsberg
KTH, Stockholm, Sweden
1 shared publicationK. Hansson
Department of Production Engineering, Div. of Casting of Metals, Royal Institute of Technology, S-100 44 Stockholm, Sweden
1 shared publicationKarin Hansson
Division of Casting of Metals, Royal Institute of Technology, Stockholm, Sweden
1 shared publication
Latest Publications
- 13 October 2012
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 65 (6) , 791-794
On the Relationship Between Inclusions and Pores, Part I: Precipitation
- 13 October 2012
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 65 (6) , 791-794
On the Relationship Between Inclusions and Pores, Part I: Precipitation
- 15 November 2005
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 413-414, 363-372
On the solidification of nodular cast iron and its relation to the expansion and contraction
- 15 November 2005
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 413-414, 363-372
On the solidification of nodular cast iron and its relation to the expansion and contraction
- 1 February 2005
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 36 (1) , 85-96
The effect of cooling rate on the solidification of INCONEL 718
- 1 February 2005
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 36 (1) , 85-96
The effect of cooling rate on the solidification of INCONEL 718
- 5 February 2003
- Published by Wiley in Advanced Engineering Materials
- Vol. 5 (1-2) , 66-77
On the Behavior of Hot Crack Formation During Solidification in Fe–Ni Alloys
The behavior of hot crack (tearing) mechanism during solidification in two Fe–Ni alloys. The mechanical properties during solidification, with focus on their hot crack (tearing) behavior, were investigated by tests on “in‐situ” solidified samples. Hot cracking susceptibility was determined by using the transition temperature for area reduction (hot ductility), e.g., the transition temperature between brittle and ductile fractures. The results of the tensile tests are compared with the liquidus and solidus temperatures, measured by thermal analysis.
- 5 February 2003
- Published by Wiley in Advanced Engineering Materials
- Vol. 5 (1-2) , 66-77
On the Behavior of Hot Crack Formation During Solidification in Fe–Ni Alloys
The behavior of hot crack (tearing) mechanism during solidification in two Fe–Ni alloys. The mechanical properties during solidification, with focus on their hot crack (tearing) behavior, were investigated by tests on “in‐situ” solidified samples. Hot cracking susceptibility was determined by using the transition temperature for area reduction (hot ductility), e.g., the transition temperature between brittle and ductile fractures. The results of the tensile tests are compared with the liquidus and solidus temperatures, measured by thermal analysis.
- 4 October 2002
- Published by Wiley in Scandinavian Journal of Metallurgy
- Vol. 31 (5) , 292-297
Thoughts about the initial solidification process during continuous casting of steel
The initial solidification during continuous casting is very important for the surface quality of the strand. Oscillation marks are formed by the movement of the mould. One mainly distinguishes between two different types of marks, namely folding marks and overflow marks. The formation of these can be described by the heat flow and the surface tension balance. A theoretical analysis outlining the most important parameters controlling the formation of these marks is presented. A metallographic analysis of the formation was also performed. The theory and observations have been used to analyse the effect of casting speed and oscillation frequency on the formation of different types of marks. It is shown that a meniscus is formed at the top of the growing shell. The maximum height of the meniscus determines the ideal distance between the marks. The mould frequency is related to this height. A frequency that is far from ideal causes overflow marks and folding marks with macrosegregation and cracks. The distance between the marks is, in such cases, not constant. The depth of the marks is calculated from the heat flow and the surface tension balance.
- 4 October 2002
- Published by Wiley in Scandinavian Journal of Metallurgy
- Vol. 31 (5) , 292-297
Thoughts about the initial solidification process during continuous casting of steel
The initial solidification during continuous casting is very important for the surface quality of the strand. Oscillation marks are formed by the movement of the mould. One mainly distinguishes between two different types of marks, namely folding marks and overflow marks. The formation of these can be described by the heat flow and the surface tension balance. A theoretical analysis outlining the most important parameters controlling the formation of these marks is presented. A metallographic analysis of the formation was also performed. The theory and observations have been used to analyse the effect of casting speed and oscillation frequency on the formation of different types of marks. It is shown that a meniscus is formed at the top of the growing shell. The maximum height of the meniscus determines the ideal distance between the marks. The mould frequency is related to this height. A frequency that is far from ideal causes overflow marks and folding marks with macrosegregation and cracks. The distance between the marks is, in such cases, not constant. The depth of the marks is calculated from the heat flow and the surface tension balance.
- 1 August 2002
- Published by Wiley in Scandinavian Journal of Metallurgy
- Vol. 31 (4) , 256-267
Hot ductility of an Fe‐10%Ni alloy during penetration of copper
Today's available theories for hot crack formation are based on the fact that hot cracks are formed in the presence of liquid films in the interdendritic areas or at the grain boundaries, which are exposed to tensile stress. Copper is well known to cause hot shortness in steels. In order to study how the liquid embrittles the material, high‐temperature tensile tests were performed at two strain rates during the penetration of liquid copper into Fe‐10%Ni. The penetration distance was measured in samples that were exposed to strain without fracturing. The ductility (area reduction), strain and ultimate tensile stress were determined. Microprobe analysis was performed on the fractured samples. The transition temperature of ductility was found at 1400–1450°C without copper penetration whereas it occurred at 1025–1078°C during the penetration of copper, i.e. copper starts to embrittle at a temperature below its melting point. The microprobe measurements showed that the diffusion rate of copper into Fe‐10%Ni was enhanced when the lattice was strained. The results are discussed in terms of a new theory concerning vacancy formation and condensation as the dominating mechanism for hot crack formation during solidification.
- 1 August 2002
- Published by Wiley in Scandinavian Journal of Metallurgy
- Vol. 31 (4) , 256-267
Hot ductility of an Fe‐10%Ni alloy during penetration of copper
Today's available theories for hot crack formation are based on the fact that hot cracks are formed in the presence of liquid films in the interdendritic areas or at the grain boundaries, which are exposed to tensile stress. Copper is well known to cause hot shortness in steels. In order to study how the liquid embrittles the material, high‐temperature tensile tests were performed at two strain rates during the penetration of liquid copper into Fe‐10%Ni. The penetration distance was measured in samples that were exposed to strain without fracturing. The ductility (area reduction), strain and ultimate tensile stress were determined. Microprobe analysis was performed on the fractured samples. The transition temperature of ductility was found at 1400–1450°C without copper penetration whereas it occurred at 1025–1078°C during the penetration of copper, i.e. copper starts to embrittle at a temperature below its melting point. The microprobe measurements showed that the diffusion rate of copper into Fe‐10%Ni was enhanced when the lattice was strained. The results are discussed in terms of a new theory concerning vacancy formation and condensation as the dominating mechanism for hot crack formation during solidification.