Robert Manzke
Research Subjects
Robert Manzke has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Volker Rasche
Department of Internal Medicine II, Ulm University Medical Center, Ulm, Germany
4 shared publications - Anja Müller-Lutz
Department of Diagnostic and Interventional Radiology, Medical Faculty, University Dusseldorf, D-40225 Dusseldorf, Germany
3 shared publications - Axel Bornstedt
Department of Internal Medicine II, University Hospital of Ulm, Ulm, Germany
3 shared publications - Vivek Y. Reddy
Mount Sinai Fuster Heart Hospital, Icahn School of Medicine at Mount Sinai, New York, New York
3 shared publications D. Hawkes
Imaging Sciences Group, Guy's Hospital Campus, KCL, London, United Kingdom
2 shared publications- Gerd Ulrich Nienhaus
Institute of Applied Physics Karlsruhe Institute of Technology Karlsruhe Germany
2 shared publications
Latest Publications
- Open Access
- 1 January 2011
- Published by Elsevier in Journal of Cardiovascular Magnetic Resonance
- Vol. 13 (1) , 59
Acceleration of tissue phase mapping with sensitivity encoding at 3T
- 1 January 2011
- Published by Elsevier in Journal of Cardiovascular Magnetic Resonance
- Vol. 13 (1) , 59
Open AccessAcceleration of tissue phase mapping with sensitivity encoding at 3T
- Open Access
- 1 January 2011
- Published by Elsevier in Journal of Cardiovascular Magnetic Resonance
- Vol. 13 (1) , 5
Acceleration of tissue phase mapping by k-t BLAST: a detailed analysis of the influence of k-t-BLAST for the quantification of myocardial motion at 3T
- 1 January 2011
- Published by Elsevier in Journal of Cardiovascular Magnetic Resonance
- Vol. 13 (1) , 5
Open AccessAcceleration of tissue phase mapping by k-t BLAST: a detailed analysis of the influence of k-t-BLAST for the quantification of myocardial motion at 3T
- 26 September 2010
- Published by Springer Nature in European Radiology
- Vol. 21 (4) , 799-806
Assessment of the coronary venous system in heart failure patients by blood pool agent enhanced whole-heart MRI
Objective To investigate the feasibility of MRI for non-invasive assessment of the coronary sinus (CS) and the number and course of its major tributaries in heart failure patients. Methods Fourteen non-ischaemic heart failure patients scheduled for cardiac resynchronisation therapy (CRT) underwent additional whole-heart coronary venography. MRI was performed 1 day before device implantation. The visibility, location and dimensions of the CS and its major tributaries were assessed and the number of potential implantation sites identified. The MRI results were validated by X-ray venography conventionally acquired during the device implantation procedure. Results The right atrium (RA), CS and mid-cardiac vein (MCV) could be visualised in all patients. 36% of the identified candidate branches were located posterolaterally, 48% laterally and 16% anterolaterally. The average diameter of the CS was quantified as 9.8 mm, the posterior interventricular vein (PIV) 4.6 mm, posterolateral segments 3.3 mm, lateral 2.9 mm and anterolateral 2.9 mm. Concordance with X-ray in terms of number and location of candidate branches was given in most cases. Conclusion Contrast-enhanced MRI venography appears feasible for non-invasive pre-interventional assessment of the course of the CS and its major tributaries.
- 26 September 2010
- Published by Springer Nature in European Radiology
- Vol. 21 (4) , 799-806
Assessment of the coronary venous system in heart failure patients by blood pool agent enhanced whole-heart MRI
Objective To investigate the feasibility of MRI for non-invasive assessment of the coronary sinus (CS) and the number and course of its major tributaries in heart failure patients. Methods Fourteen non-ischaemic heart failure patients scheduled for cardiac resynchronisation therapy (CRT) underwent additional whole-heart coronary venography. MRI was performed 1 day before device implantation. The visibility, location and dimensions of the CS and its major tributaries were assessed and the number of potential implantation sites identified. The MRI results were validated by X-ray venography conventionally acquired during the device implantation procedure. Results The right atrium (RA), CS and mid-cardiac vein (MCV) could be visualised in all patients. 36% of the identified candidate branches were located posterolaterally, 48% laterally and 16% anterolaterally. The average diameter of the CS was quantified as 9.8 mm, the posterior interventricular vein (PIV) 4.6 mm, posterolateral segments 3.3 mm, lateral 2.9 mm and anterolateral 2.9 mm. Concordance with X-ray in terms of number and location of candidate branches was given in most cases. Conclusion Contrast-enhanced MRI venography appears feasible for non-invasive pre-interventional assessment of the course of the CS and its major tributaries.
- 26 May 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Imaging
- Vol. 29 (2) , 260-272
Automatic Segmentation of Rotational X-Ray Images for Anatomic Intra-Procedural Surface Generation in Atrial Fibrillation Ablation Procedures
Since the introduction of 3-D rotational X-ray imaging, protocols for 3-D rotational coronary artery imaging have become widely available in routine clinical practice. Intra-procedural cardiac imaging in a computed tomography (CT)-like fashion has been particularly compelling due to the reduction of clinical overhead and ability to characterize anatomy at the time of intervention. We previously introduced a clinically feasible approach for imaging the left atrium and pulmonary veins (LAPVs) with short contrast bolus injections and scan times of ~ 4-10 s. The resulting data have sufficient image quality for intra-procedural use during electro-anatomic mapping (EAM) and interventional guidance in atrial fibrillation (AF) ablation procedures. In this paper, we present a novel technique to intra-procedural surface generation which integrates fully-automated segmentation of the LAPVs for guidance in AF ablation interventions. Contrast-enhanced rotational X-ray angiography (3-D RA) acquisitions in combination with filtered-back-projection-based reconstruction allows for volumetric interrogation of LAPV anatomy in near-real-time. An automatic model-based segmentation algorithm allows for fast and accurate LAPV mesh generation despite the challenges posed by image quality; relative to pre-procedural cardiac CT/MR, 3-D RA images suffer from more artifacts and reduced signal-to-noise. We validate our integrated method by comparing (1) automatic and manual segmentations of intra-procedural 3-D RA data, (2) automatic segmentations of intra-procedural 3-D RA and pre-procedural CT/MR data, and (3) intra-procedural EAM point cloud data with automatic segmentations of 3-D RA and CT/MR data. Our validation results for automatically segmented intra-procedural 3-D RA data show average segmentation errors of (1) ~ 1.3 mm compared with manual 3-D RA segmentations (2) ~ 2.3 mm compared with automatic segmentation of pre-procedural CT/MR data and (3) ~ 2.1 mm compared with registered intra-procedural EAM point clouds. The overall experiments indicate that LAPV surfaces can be automatically segmented intra-procedurally from 3-D RA data with comparable quality relative to meshes derived from pre-procedural CT/MR.
- 26 May 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Imaging
- Vol. 29 (2) , 260-272
Automatic Segmentation of Rotational X-Ray Images for Anatomic Intra-Procedural Surface Generation in Atrial Fibrillation Ablation Procedures
Since the introduction of 3-D rotational X-ray imaging, protocols for 3-D rotational coronary artery imaging have become widely available in routine clinical practice. Intra-procedural cardiac imaging in a computed tomography (CT)-like fashion has been particularly compelling due to the reduction of clinical overhead and ability to characterize anatomy at the time of intervention. We previously introduced a clinically feasible approach for imaging the left atrium and pulmonary veins (LAPVs) with short contrast bolus injections and scan times of ~ 4-10 s. The resulting data have sufficient image quality for intra-procedural use during electro-anatomic mapping (EAM) and interventional guidance in atrial fibrillation (AF) ablation procedures. In this paper, we present a novel technique to intra-procedural surface generation which integrates fully-automated segmentation of the LAPVs for guidance in AF ablation interventions. Contrast-enhanced rotational X-ray angiography (3-D RA) acquisitions in combination with filtered-back-projection-based reconstruction allows for volumetric interrogation of LAPV anatomy in near-real-time. An automatic model-based segmentation algorithm allows for fast and accurate LAPV mesh generation despite the challenges posed by image quality; relative to pre-procedural cardiac CT/MR, 3-D RA images suffer from more artifacts and reduced signal-to-noise. We validate our integrated method by comparing (1) automatic and manual segmentations of intra-procedural 3-D RA data, (2) automatic segmentations of intra-procedural 3-D RA and pre-procedural CT/MR data, and (3) intra-procedural EAM point cloud data with automatic segmentations of 3-D RA and CT/MR data. Our validation results for automatically segmented intra-procedural 3-D RA data show average segmentation errors of (1) ~ 1.3 mm compared with manual 3-D RA segmentations (2) ~ 2.3 mm compared with automatic segmentation of pre-procedural CT/MR data and (3) ~ 2.1 mm compared with registered intra-procedural EAM point clouds. The overall experiments indicate that LAPV surfaces can be automatically segmented intra-procedurally from 3-D RA data with comparable quality relative to meshes derived from pre-procedural CT/MR.
- 8 March 2007
- Published by SPIE-Intl Soc Optical Eng
- Vol. 6509, 65092B
Rapid fusion of 2D X-ray fluoroscopy with 3D multislice CT for image-guided electrophysiology procedures
Interventional cardiac electrophysiology (EP) procedures are typically performed under X-ray fluoroscopy for visualizing catheters and EP devices relative to other highly-attenuating structures such as the thoracic spine and ribs. These projections do not however contain information about soft-tissue anatomy and there is a recognized need for fusion of conventional fluoroscopy with pre-operatively acquired cardiac multislice computed tomography (MSCT) volumes. Rapid 2D-3D integration in this application would allow for real-time visualization of all catheters present within the thorax in relation to the cardiovascular anatomy visible in MSCT. We present a method for rapid fusion of 2D X-ray fluoroscopy with 3DMSCT that can facilitate EP mapping and interventional procedures by reducing the need for intra-operative contrast injections to visualize heart chambers and specialized systems to track catheters within the cardiovascular anatomy. We use hardware-accelerated ray-casting to compute digitally reconstructed radiographs (DRRs) from the MSCT volume and iteratively optimize the rigid-body pose of the volumetric data to maximize the similarity between the MSCT-derived DRR and the intra-operative X-ray projection data.
- 8 March 2007
- Published by SPIE-Intl Soc Optical Eng
- Vol. 6509, 65092B
Rapid fusion of 2D X-ray fluoroscopy with 3D multislice CT for image-guided electrophysiology procedures
Interventional cardiac electrophysiology (EP) procedures are typically performed under X-ray fluoroscopy for visualizing catheters and EP devices relative to other highly-attenuating structures such as the thoracic spine and ribs. These projections do not however contain information about soft-tissue anatomy and there is a recognized need for fusion of conventional fluoroscopy with pre-operatively acquired cardiac multislice computed tomography (MSCT) volumes. Rapid 2D-3D integration in this application would allow for real-time visualization of all catheters present within the thorax in relation to the cardiovascular anatomy visible in MSCT. We present a method for rapid fusion of 2D X-ray fluoroscopy with 3DMSCT that can facilitate EP mapping and interventional procedures by reducing the need for intra-operative contrast injections to visualize heart chambers and specialized systems to track catheters within the cardiovascular anatomy. We use hardware-accelerated ray-casting to compute digitally reconstructed radiographs (DRRs) from the MSCT volume and iteratively optimize the rigid-body pose of the volumetric data to maximize the similarity between the MSCT-derived DRR and the intra-operative X-ray projection data.
- 1 January 2006
- Published by Springer Nature in Lecture Notes in Computer Science
- Vol. 9, 604-611
Intra-operative Volume Imaging of the Left Atrium and Pulmonary Veins with Rotational X-Ray Angiography
Complex electrophysiology (EP) procedures, such as catheter-based ablation in the left atrium and pulmonary veins (LAPV) for treatment of atrial fibrillation, require knowledge of heart chamber anatomy. Electroanatomical mapping (EAM) is typically used to define cardiac structures by combining electromagnetic spatial catheter localization with surface models which interpolate the anatomy between EAM point locations in 3D. Recently, the incorporation of pre-operative volumetric CT or MR data sets has allowed for more detailed maps of LAPV anatomy to be used intra-operatively. Preoperative data sets are however a rough guide since they can be acquired several days to weeks prior to EP intervention. Due to positional and physiological changes, the intra-operative cardiac anatomy can be different from that depicted in the pre-operative data. We present a novel application of contrast-enhanced rotational X-ray imaging for CT-like reconstruction of 3D LAPV anatomy during the intervention itself. We perform two selective contrast-enhanced rotational acquisitions and reconstruct CT-like volumes with 3D filtered back projection. Two volumes depicting the left and right portions of the LAPV are registered and fused. The combined data sets are then visualized and segmented intra-procedurally to provide anatomical data and surface models for intervention guidance. Our results from animal and human experiments indicate that the anatomical information from intra-operative CT-like reconstructions compares favorably with pre-acquired CT data and can be of sufficient quality for intra-operative guidance.
- 1 January 2006
- Published by Springer Nature in Lecture Notes in Computer Science
- Vol. 9, 604-611
Intra-operative Volume Imaging of the Left Atrium and Pulmonary Veins with Rotational X-Ray Angiography
Complex electrophysiology (EP) procedures, such as catheter-based ablation in the left atrium and pulmonary veins (LAPV) for treatment of atrial fibrillation, require knowledge of heart chamber anatomy. Electroanatomical mapping (EAM) is typically used to define cardiac structures by combining electromagnetic spatial catheter localization with surface models which interpolate the anatomy between EAM point locations in 3D. Recently, the incorporation of pre-operative volumetric CT or MR data sets has allowed for more detailed maps of LAPV anatomy to be used intra-operatively. Preoperative data sets are however a rough guide since they can be acquired several days to weeks prior to EP intervention. Due to positional and physiological changes, the intra-operative cardiac anatomy can be different from that depicted in the pre-operative data. We present a novel application of contrast-enhanced rotational X-ray imaging for CT-like reconstruction of 3D LAPV anatomy during the intervention itself. We perform two selective contrast-enhanced rotational acquisitions and reconstruct CT-like volumes with 3D filtered back projection. Two volumes depicting the left and right portions of the LAPV are registered and fused. The combined data sets are then visualized and segmented intra-procedurally to provide anatomical data and surface models for intervention guidance. Our results from animal and human experiments indicate that the anatomical information from intra-operative CT-like reconstructions compares favorably with pre-acquired CT data and can be of sufficient quality for intra-operative guidance.
- 23 March 2005
- Published by IOP Publishing in Physics in Medicine & Biology
- Vol. 50 (7) , 1547-1568
Helical cardiac cone beam CT reconstruction with large area detectors: a simulation study
Retrospectively gated cardiac volume CT imaging has become feasible with the introduction of heart rate adaptive cardiac CT reconstruction algorithms. The development in detector technology and the rapid introduction of multi-row detectors has demanded reconstruction schemes which account for the cone geometry. With the extended cardiac reconstruction (ECR) framework, the idea of approximate helical cone beam CT has been extended to be used with retrospective gating, enabling heart rate adaptive cardiac cone beam reconstruction. In this contribution, the ECR technique is evaluated for systems with an increased number of detector rows, which leads to larger cone angles. A simulation study has been carried out based on a 4D cardiac phantom consisting of a thorax model and a dynamic heart insert. Images have been reconstructed for different detector set-ups. Reconstruction assessment functions have been calculated for the detector set-ups employing different rotation times, relative pitches and heart rates. With the increased volume coverage of large area detector systems, low-pitch scans become feasible without resulting in extensive scan times, inhibiting single breath hold acquisitions. ECR delivers promising image results when being applied to systems with larger cone angles.
- 23 March 2005
- Published by IOP Publishing in Physics in Medicine & Biology
- Vol. 50 (7) , 1547-1568
Helical cardiac cone beam CT reconstruction with large area detectors: a simulation study
Retrospectively gated cardiac volume CT imaging has become feasible with the introduction of heart rate adaptive cardiac CT reconstruction algorithms. The development in detector technology and the rapid introduction of multi-row detectors has demanded reconstruction schemes which account for the cone geometry. With the extended cardiac reconstruction (ECR) framework, the idea of approximate helical cone beam CT has been extended to be used with retrospective gating, enabling heart rate adaptive cardiac cone beam reconstruction. In this contribution, the ECR technique is evaluated for systems with an increased number of detector rows, which leads to larger cone angles. A simulation study has been carried out based on a 4D cardiac phantom consisting of a thorax model and a dynamic heart insert. Images have been reconstructed for different detector set-ups. Reconstruction assessment functions have been calculated for the detector set-ups employing different rotation times, relative pitches and heart rates. With the increased volume coverage of large area detector systems, low-pitch scans become feasible without resulting in extensive scan times, inhibiting single breath hold acquisitions. ECR delivers promising image results when being applied to systems with larger cone angles.
- 22 November 2004
- Published by Wiley in Medical Physics
- Vol. 31 (12) , 3345-3362
Automatic phase determination for retrospectively gated cardiac CT
The recent improvements in CT detector and gantry technology in combination with new heart rate adaptive cone beam reconstruction algorithms enable the visualization of the heart in three dimensions at high spatial resolution. However, the finite temporal resolution still impedes the artifact‐free reconstruction of the heart at any arbitrary phase of the cardiac cycle. Cardiac phases must be found during which the heart is quasistationary to obtain outmost image quality. It is challenging to find these phases due to intercycle and patient‐to‐patient variability. Electrocardiogram (ECG) information does not always represent the heart motion with an adequate accuracy. In this publication, a simple and efficient image‐based technique is introduced which is able to deliver stable cardiac phases in an automatic and patient‐specific way. From low‐resolution four‐dimensional data sets, the most stable phases are derived by calculating the object similarity between subsequent phases in the cardiac cycle. Patient‐specific information about the object motion can be determined and resolved spatially. This information is used to perform optimized high‐resolution reconstructions at phases of little motion. Results based on a simulation study and three real patient data sets are presented. The projection data were generated using a 16‐slice cone beam CT system in low‐pitch helical mode with parallel ECG recording.
- 22 November 2004
- Published by Wiley in Medical Physics
- Vol. 31 (12) , 3345-3362
Automatic phase determination for retrospectively gated cardiac CT
The recent improvements in CT detector and gantry technology in combination with new heart rate adaptive cone beam reconstruction algorithms enable the visualization of the heart in three dimensions at high spatial resolution. However, the finite temporal resolution still impedes the artifact‐free reconstruction of the heart at any arbitrary phase of the cardiac cycle. Cardiac phases must be found during which the heart is quasistationary to obtain outmost image quality. It is challenging to find these phases due to intercycle and patient‐to‐patient variability. Electrocardiogram (ECG) information does not always represent the heart motion with an adequate accuracy. In this publication, a simple and efficient image‐based technique is introduced which is able to deliver stable cardiac phases in an automatic and patient‐specific way. From low‐resolution four‐dimensional data sets, the most stable phases are derived by calculating the object similarity between subsequent phases in the cardiac cycle. Patient‐specific information about the object motion can be determined and resolved spatially. This information is used to perform optimized high‐resolution reconstructions at phases of little motion. Results based on a simulation study and three real patient data sets are presented. The projection data were generated using a 16‐slice cone beam CT system in low‐pitch helical mode with parallel ECG recording.
- 12 May 2004
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5370, 2003-2015
Iterative cardiac cone-beam CT reconstruction
High resolution images of coronary arteries are reconstructed with the algebraic reconstruction technique (ART) applied to cone-beam CT cardiac imaging. Due to the motion of the heart during the scan, only data belonging to the same phase of the heart cycle can be used in the reconstruction process. Currently, all known analytical image reconstruction algorithms for this problem are approximate and do not take the cone-angle fully into account. ART models the scanner geometry exactly and does not suffer from large-cone angles, which is especially important with the current trend in CT to use detectors with more and more rows and larger cone-angles. In this study, the influence of the cardiac weighting function on image quality is investigated. Cardiac ART (CART) is used to reconstruct images from clinical data obtained with current 16-row CT scanners. The results are compared to an analytical reconstruction method.
- 12 May 2004
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5370, 2003-2015
Iterative cardiac cone-beam CT reconstruction
High resolution images of coronary arteries are reconstructed with the algebraic reconstruction technique (ART) applied to cone-beam CT cardiac imaging. Due to the motion of the heart during the scan, only data belonging to the same phase of the heart cycle can be used in the reconstruction process. Currently, all known analytical image reconstruction algorithms for this problem are approximate and do not take the cone-angle fully into account. ART models the scanner geometry exactly and does not suffer from large-cone angles, which is especially important with the current trend in CT to use detectors with more and more rows and larger cone-angles. In this study, the influence of the cardiac weighting function on image quality is investigated. Cardiac ART (CART) is used to reconstruct images from clinical data obtained with current 16-row CT scanners. The results are compared to an analytical reconstruction method.
- 18 November 2003
- Published by Wiley in Medical Physics
- Vol. 30 (12) , 3072-3080
Adaptive temporal resolution optimization in helical cardiac cone beam CT reconstruction
Cone beam computed tomography scanners in combination with heart rate adaptive reconstruction schemes have the potential to enable cardiac volumetric computed tomography (CT) imaging for a larger number of patients and applications. In this publication, an adaptive scheme for the automatic and patient‐specific reconstruction optimization is introduced to improve the temporal resolution and image quality. The optimization method permits the automatic determination of the required amount of gated helical cone beam projection data for the reconstruction volume. It furthermore allows one to optimize subvolume reconstruction yielding an increased temporal resolution. In addition, methods for the assessment of the temporal resolution are given which enable a quantitative documentation of the reconstruction improvements. Results are presented for patient data sets acquired in low pitch helical mode using a 16‐slice cone beam CT system with parallel ECG recording.
- 18 November 2003
- Published by Wiley in Medical Physics
- Vol. 30 (12) , 3072-3080
Adaptive temporal resolution optimization in helical cardiac cone beam CT reconstruction
Cone beam computed tomography scanners in combination with heart rate adaptive reconstruction schemes have the potential to enable cardiac volumetric computed tomography (CT) imaging for a larger number of patients and applications. In this publication, an adaptive scheme for the automatic and patient‐specific reconstruction optimization is introduced to improve the temporal resolution and image quality. The optimization method permits the automatic determination of the required amount of gated helical cone beam projection data for the reconstruction volume. It furthermore allows one to optimize subvolume reconstruction yielding an increased temporal resolution. In addition, methods for the assessment of the temporal resolution are given which enable a quantitative documentation of the reconstruction improvements. Results are presented for patient data sets acquired in low pitch helical mode using a 16‐slice cone beam CT system with parallel ECG recording.