Tansel Karabacak

Tansel Karabacak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tansel Karabacak has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Scalable eco-friendly fabrication of hierarchical superhydrophobic metal surfaces for atmospheric water harvesting

    by Laylan B. Hassan, Nawzat S. Saadi, Tansel Karabacak

    The worldwide shortage of freshwater has fueled interest in atmospheric water harvesting (AWH) as a promising option for decentralized water generation. In this study, a scalable method for the fabrication of superhydrophobic (SHP) metal surfaces by sandblasting and hot-water treatment (HWT) followed by fluorination is introduced to improve AWH performance. Aluminum alloy, copper, and zinc substrates were designed to have hierarchical micro-/nanostructures and then fluorinated to render them SHP. Of these, copper showed superior water collection efficiency owing to its high thermal conductivity and optimized surface texture. Under controlled humidity and temperature, water collection on copper was enhanced by 80% compared to aluminum alloy and 34% compared to zinc. To further enhance condensation and droplet drainage, bioinspired groove patterns were fabricated on copper surfaces. When tilted at 45°, the grooved samples exhibited a 21% increase in water collection efficiency compared to flat SHP copper surfaces, owing to improved droplet coalescence and guided drainage. Overall, this study highlights the critical roles of substrate material, hierarchical surface design, and tilt angle in advancing passive atmospheric water-harvesting technologies.

  • Open Access

    Size-tunable tellurium quantum dots by glancing angle deposition

    by S.M. Sayem, Salim Hussain, Fernando Maia de Oliveira, Ranjitha Kumarapuram Hariharalakshmanan, Fumiya Watanabe, Grégory Guisbiers, Tansel Karabacak

  • Open Access

    Fabrication of robust and durable superamphiphobic aluminum alloy and zinc surfaces via dual sandblasting and steam treatment

    by Laylan B. Hassan, Nawzat S. Saadi, Tansel Karabacak

    We present a scalable and environmentally friendly method for fabricating mechanically robust superamphiphobic coatings on aluminum alloy and zinc substrates using a dual-step process combining sandblasting (SB) and steam treatment (ST), followed by surface energy reduction with fluorinated molecules. This approach creates hierarchical micro/nano structures essential for omniphobic performance. On Al-alloy SB + ST surfaces we measured static contact angles of 162.0° (water), 156.1° (ethylene glycol), and 154.4° (peanut oil), while the corresponding Zn surfaces reached 160.1°, 156.0°, and 152.8°, respectively, with sliding angles below 5° across all tested liquids. The coatings retained high repellency after 50 tape-peeling cycles and 100 cm of sandpaper abrasion under a 500 g load (e.g., ethylene glycol > 140° and peanut oil ≈ 120°). They also showed resistance to water jet impact, excellent self-cleaning, and anti-fogging performance. Compared to conventional hot water treatment or chemical etching, this ST-based method enables faster, cleaner fabrication and significantly enhances mechanical durability making it a promising candidate for large-scale applications in anti-fouling, anti-corrosion, and protective surface technologies.


  • Open Access

    Glancing Angle Deposited Nanostructured Tellurium Layer Against Dendrite Formation and Side Reactions in Aqueous Zn-Ion Battery Anode

    by Salim Hussain, S. M. Sayem, Assem Basurrah, Tahany Rashed, Fumiya Watanabe, Noureen Siraj, Tansel Karabacak

    Aqueous zinc ion batteries (AZIBs) have considerable potential for energy storage owing to their cost-effectiveness, safety, and environmental sustainability. However, dendrite formation, hydrogen evolution reaction (HER), and corrosion of the bare zinc (B-Zn) anode tremendously impact the performance degradation and premature failure of AZIBs. This study introduces a glancing angle deposition (GLAD) approach during the sputtering process to fabricate tellurium nanostructured (TeNS) at the zinc (Zn) anode to avoid the aforementioned issues with the B-Zn anode. Three different deposition times (5, 10, and 30 min) were used to prepare TeNS at the Zn anode. The morphology, crystallinity, composition, and wettability of the TeNSs were analyzed. The TeNSs served as hydrophilic sites and a protective layer, facilitating uniform Zn nucleation and plating while inhibiting dendrite formation and side reactions. Consequently, the symmetric cell with TeNS deposited on the Zn anode for 10 min (Te@Zn_10 min) demonstrated an enhanced cycling stability of 350 h, the lowest nucleation overpotential of 10.65 mV at a current density of 1 mA/cm2, and an areal capacity of 0.5 mAh/cm2. The observed enhancement in the cycling stability and reduction in the nucleation overpotential can be attributed to the optimal open area fraction of the TeNSs on the Zn surface, which promotes uniform Zn deposition while effectively suppressing side reactions.


  • Open Access

    Enhanced dropwise condensation using superhydrophobic surfaces with hierarchical roughness: A scalable and eco-friendly approach

    by Laylan B. Hassan, Nawzat S. Saadi, Tansel Karabacak

    Dropwise condensation of water vapor is crucial for industrial processes such as thermal management, power generation, air conditioning, and dew/fog harvesting. Continuous dropwise condensation requires surfaces with optimized droplet nucleation and efficient departure, relying on heterogeneous wettability and surface engineering. This study introduces a simple, cost-effective, and environmentally friendly method to fabricate hierarchical micro–nanoroughened surfaces on aluminum alloy, copper, and zinc substrates. By combining sandblasting for microscale roughness and hot water treatment (HWT) for nanoscale features, the process overcomes limitations of existing substrate-specific or costly fabrication methods. The resulting surfaces exhibit superhydrophobic properties with water contact angles up to 162°, enhancing droplet nucleation and departure. Growth exponent analysis (α ≈ 1/3) confirms efficient droplet departure, sustaining condensation cycles. These hierarchical structures outperform smooth and single-roughness surfaces, offering scalable, versatile solutions for condensation-driven applications, paving the way for improved energy efficiency and operational performance across various industries. Impact statement: Scientific impact.This study advances the field of surface engineering by introducing a scalable and environmentally friendly method to fabricate hierarchical superhydrophobic surfaces on metals. The results provide new insights into optimizing dropwise condensation, with water contact angles exceeding 160° and growth exponent analysis (α ≈ 1/3) confirming enhanced condensation dynamics. These findings offer a significant leap forward in designing efficient heat-transfer surfaces for various applications. Practical applications. This study advances the field of surface engineering by introducing a scalable and environmentally friendly method to fabricate hierarchical superhydrophobic surfaces on metals. The results provide new insights into optimizing dropwise condensation, with water contact angles exceeding 160° and growth exponent analysis (α ≈ 1/3) confirming enhanced condensation dynamics. These findings offer a significant leap forward in designing efficient heat-transfer surfaces for various applications. Policy relevance. The environmentally friendly fabrication process, which avoids toxic chemicals and high-energy consumption, aligns with global policy efforts toward sustainable engineering and green technology adoption. It supports industrial practices aimed at reducing carbon footprints and optimizing resource utilization. Societal benefit. This research directly addresses challenges in water and energy resource management. By improving the efficiency of condensation technologies, the study contributes to enhancing access to clean water and sustainable energy solutions, addressing global needs for resource sustainability. Graphical


  • Open Access

    Growth of zinc oxide nanowires by a hot water deposition method

    by Nawzat S Saadi, Laylan B Hassan, S M Sayem, Karren L More, Tansel Karabacak

    Recently, various methods have been developed for synthesizing zinc oxide (ZnO) nanostructures, including physical and chemical vapor deposition, as well as wet chemistry. These common methods require either high temperature, high vacuum, or toxic chemicals. In this study, we report the growth of zinc oxide ZnO nanowires by a new hot water deposition (HWD) method on various types of substrates, including copper plates, foams, and meshes, as well as on indium tin oxide (ITO)-coated glasses (ITO/glass). HWD is derived from the hot water treatment (HWT) method, which involves immersing piece(s) of metal and substrate(s) in hot deionized water and does not require any additives or catalysts. Metal acts as the source of metal oxide molecules that migrate in water and deposit on the substrate surface to form metal oxide nanostructures (MONSTRs). The morphological and crystallographic analyses of the source-metals and substrates revealed the presence of uniformly crystalline ZnO nanorods after the HWD. In addition, the growth mechanism of ZnO nanowires using HWD is discussed. This process is simple, inexpensive, low temperature, scalable, and eco-friendly. Moreover, HWD can be used to deposit a large variety of MONSTRs on almost any type of substrate material or geometry.


  • Open Access

    Influence of Substrate Location and Temperature Variation on the Growth of ZnO Nanorods Synthesized by Hot Water Treatment

    by S. M. Sayem, Ranjitha Kumarapuram Hariharalakshmanan, Emad Badradeen, Shawn E. Bourdo, Tansel Karabacak

    Hot water treatment (HWT) is a versatile technique for synthesizing metal oxide nanostructures (MONSTRs) by immersing metal substrates in hot water, typically in glass beakers. The proximity of substrates to the heat source during HWT can influence the temperature of the substrate and subsequently impact MONSTR growth. In our study, zinc (Zn) substrates underwent HWT at the base of a glass beaker in contact with a hot plate and at four different vertical distances from the base. While the set temperature of deionized (DI) water was 75.0 °C, the substrate locations exhibited variations, notably with the base reaching 95.0 °C. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and Raman spectroscopy showed stoichiometric and crystalline zinc oxide (ZnO) nanorods. ZnO rods on the base, exposed to higher temperatures, displayed greater growth in length and diameter, and higher crystallinity. Nanorods with increasing vertical distances from the base exhibited a logarithmic decrease in length despite identical temperatures, whereas their diameters remained constant. We attribute these findings to crucial HWT growth mechanisms like surface diffusion and “plugging”, influenced by temperature and water flow within the beaker. Our results provide insights for optimizing synthesis parameters to effectively control MONSTR growth through HWT.


  • Cyclic voltammetry and specific capacitance studies of copper oxide nanostructures grown by hot water treatment

    by Daoyuan Wang, Shanzida Haque, Tatiana Williams, Fard Karim, Ranjitha K. Hariharalakshmanan, Khalidah H. Al-Mayalee, Tansel Karabacak


  • Open Access

    In Situ Growth and UV Photocatalytic Effect of ZnO Nanostructures on a Zn Plate Immersed in Methylene Blue

    by Ranjitha K. Hariharalakshmanan, Fumiya Watanabe, Tansel Karabacak

    Nanostructures of zinc oxide (ZnO) are considered promising photocatalysts for the degradation of organic pollutants in water. This work discusses an in situ growth and UV photocatalytic effect of ZnO nanostructures on a Zn plate immersed in methylene blue (MB) at room temperature. First, the Zn surfaces were pretreated via sandblasting to introduce a micro-scale roughness. Then, the Zn plates were immersed in MB and exposed to UV light, to observe ZnO nanostructure growth and photocatalytic degradation of MB. Scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and UV-Vis diffuse reflectance spectroscopy were used to characterize the Zn surfaces. We observed the growth of stoichiometric and crystalline ZnO with a nano-leaf morphology and an estimated bandgap of 3.08 eV. The photocatalytic degradation of MB was also observed in the presence of the ZnO nanostructures and UV light. The average percentage degradation was 76% in 4 h, and the degradation rate constant was 0.3535 h−1. The experimental results suggest that room temperature growth of ZnO nanostructures (on Zn surfaces) in organic dye solutions is possible. Furthermore, the nanostructured surface can be used simultaneously for the photocatalytic degradation of the organic dye.