GDGuillaume Druart

Guillaume Druart

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guillaume Druart has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Processing Maps and Nano-IR Diagnostics of Type I Modifications in Mid-IR Germanate-Based Optical Glass

    by Paul Mathieu, Nadezhda Shchedrina, Florence De La Barrière, Guillaume Druart, Matthieu Lancry

    Mid-IR flat/integrated optics require low-loss, programmable phase control. We investigate femtosecond laser direct writing (FLDW) in aluminogermanate glass (Corning 9754), first mapping the processing landscape to delineate no modification, Type I index increase, and spatial broadening regimes. We then operate in a non-accumulating regime that provides a broad, stable writing window. Quantitative-phase microscopy yields Δφ and a monotonic Δn with optically limited cross-sections compatible with low loss. Transmission spectroscopy shows high values (about 90% up to 4 µm) and no additional absorptions across the near-IR and mid-IR range. FTIR reveals a redshift of the Ge–O–(Ge/Al) stretching envelope from ≈1 µJ, correlating with the high Δn onset. s-SNOM at 925 cm−1 resolves the written line as reduced near-field amplitude and decreased phase, confirming a local complex permittivity change consistent with densification-driven Type I tracks. Together, these results define practical conditions for on-demand mid-IR flat/GRIN/Fresnel optics by FLDW in this commercial mid-IR transparent glass.


  • Open Access

    Long-Term Radiometric Stability of Uncooled and Shutterless Microbolometer-Based Infrared Cameras

    by Olivier Gazzano, Mathieu Chambon, Yann Ferrec, Guillaume Druart

    Uncooled and shutterless microbolometer cameras are good candidates for infrared imaging systems installed on small satellites or small unmanned aerial vehicles: they are light and passive since no cooling system or mechanical shutter is required and they can be operated at ambient temperatures. However, the radiometric compensation has to be carefully performed to make the system compatible with applications where the radiometric accuracy of the images is mandatory. In this paper, we study the impact of the camera environment to the radiometric accuracy of the images. We propose and test hardware and software solutions to improve this accuracy and the quality of the radiometric images. We show that the radiometric calibration of the camera with our model is valid over a long time period— about 3 years—using in-door experiments.


  • Open Access

    Comparative Study on the Interest in Non-Uniform Rational B-Splines Representation versus Polynomial Surface Description in a Freeform Three-Mirror Anastigmat

    by Clément Freslier, Guillaume Druart, Alice Fontbonne, Thierry Lépine, Christophe Buisset, Tibor Agocs, Arnaud Heliere, Fanny Keller, Jean-Baptiste Volatier, Stéphane Beaussier, et al.

    Novel freeform optical design methods can be classified in two categories, depending on whether they focus on the generation of a starting point or the development of new optimization tools. In this paper, we design a freeform three-mirror anastigmat (TMA) and compare different surface representations using either a differential ray tracer as a new optimization tool or a commercial ray tracer (ANSYS-ZEMAX OpticStudio). For differential ray tracing, we used FORMIDABLE (Freeform Optics Raytracer with Manufacturable Imaging Design cApaBiLitiEs), an optical design library with differential ray tracing and Non-Uniform Rational B-Splines (NURBS) optimization capabilities, available under the European Software Community License (ESCL). NURBS allow a freeform surface to be represented without needing any prior knowledge of the surface, such as the polynomial degree in polynomial descriptions. OpticStudio and other commercial optical design software are designed to optimize polynomial surfaces but are not well-suited to optimize NURBS surfaces, requiring a custom optical design library. In order to demonstrate the interest in using NURBS representation, we designed and independently optimized two freeform telescopes over different iteration cycles; with NURBS using FORMIDABLE or with XY polynomials using OpticStudio. We then compared the resulting systems using their root mean square field maps to assess the optimization quality of each surface representation. We also provided a full-system comparison, including mirror freeform departures. This study shows that NURBS can be a relevant alternative to XY polynomials for the freeform optimization of reflective three-mirror telescopes as it achieves more a uniform imaging quality in the field of view.


  • Open Access

    Comparative Study on the Interest of NURBS Representation Versus Polynomial Surface Description in Freeform TMA

    by Clément Freslier, Guillaume Druart, Alice Fontbonne, Thierry Lepine, Christophe Buisset, Tibor Agocs, Arnaud Hélière, Fanny Keller, Jean-Baptiste Volatier, Stéphane Beaussier, et al.

    Novel freeform optical design methods can be classified in two categories, relevant to the generation of a starting point or to the development of new optimization tools. In this paper, we design a freeform TMA optimized with different surface representations using either a differential ray-tracer as a new optimization tool, or commercial ray tracer (ANSYS-ZEMAX OpticStudio) for comparison. For differential ray tracing, we use FORMIDABLE (Freeform Optics Raytracer with Manufacturable Imaging Design cApaBiLitiEs): an optical design library with differential ray tracing and NURBS optimization capabilities under European Software Community License (ESCL). NURBS allow to represent a freeform surface without needing any prior knowledge on the surface, such as the polynomial degree in polynomial descriptions. However, commercial optical design software are designed to optimize polynomial surfaces, but are not well-suited to optimize NURBS surfaces. This requires to use a custom optical design library. To demonstrate the interest of using NURBS representation, freeform telescopes are independently optimized with NURBS using FORMIDABLE, or XY polynomials with OpticStudio over different iteration cycles. We then compare the resulting systems using their RMS Field Maps to assess the optimization quality of each surface representation. We also provide a full-system comparison, including mirror freeform departures. This study shows that NURBS can be a relevant alternative to XY polynomials for freeform optimization of reflective 3-mirror telescopes.

  • Open Access

    Optique frugale pour l’imagerie Infrarouge

    by Guillaume Druart, Florence de la Barrière, Olivier Gazzano, Alice Fontbonne

    Le concepteur en optique est le plus souvent confronté à des critères conflictuels lorsqu’il s’agit de concevoir un système optique : performance versus taille, masse, consommation d’énergie et coût. Ceci l’amène à concevoir des optiques frugales.

  • Open Access

    Embedded Processing for Extended Depth of Field Imaging Systems: From Infinite Impulse Response Wiener Filter to Learned Deconvolution

    by Alice Fontbonne, Pauline Trouvé-Peloux, Frédéric Champagnat, Gabriel Jobert, Guillaume Druart

    Many works in the state of the art are interested in the increase of the camera depth of field (DoF) via the joint optimization of an optical component (typically a phase mask) and a digital processing step with an infinite deconvolution support or a neural network. This can be used either to see sharp objects from a greater distance or to reduce manufacturing costs due to tolerance regarding the sensor position. Here, we study the case of an embedded processing with only one convolution with a finite kernel size. The finite impulse response (FIR) filter coefficients are learned or computed based on a Wiener filter paradigm. It involves an optical model typical of codesigned systems for DoF extension and a scene power spectral density, which is either learned or modeled. We compare different FIR filters and present a method for dimensioning their sizes prior to a joint optimization. We also show that, among the filters compared, the learning approach enables an easy adaptation to a database, but the other approaches are equally robust.


  • Open Access

    Automatic Method of Exploring the Landscape of Freeform Dioptric Optical Problems, Working in the Infrared Region

    by Thibaut Mayeur, Jean-Baptiste Volatier, Guillaume Druart, Françoise Cau, Elodie Tartas, Alain Durand

    We present an automated method of finding different freeform dioptric starting systems, working in the infrared region, for further optimization in commercial optical design software. Our developed method couples the simultaneous multiple surface (SMS) method, introduced by Benítez and Miñano, with automatic optimization in Zemax OpticStudio. The method allows an optical designer to explore the merit function (MF) landscape of freeform optical problems. In this article, we apply our method to a size, weight, and power (SWaP) problem, and we compare our designed system with a system found in the literature that has the same aperture of F/1.2. Then, we increase the aperture of the system up to F/0.9, taking advantage of the use of freeform surfaces.


  • Open Access

    Photosensitivity of Infrared Glasses under Femtosecond Laser Direct Writing for mid-IR Applications

    by Pierre Delullier, Laurent Calvez, Guillaume Druart, Florence De La Barrière, Christophe Humbert, Bertrand Poumellec, Matthieu Lancry

    Chalcogenide glasses are increasingly being developed for photonic applications, particularly in the field of mid-infrared optical imaging. In this paper, we study the photosensitivity of one chalcogenide to direct femtosecond laser writing and its possible applications to micro-optics. Particular attention has been paid to the creation of phase changes and related refractive index variations. This chalcogenide glass was compared with two commercial heavy oxide glasses: Schott SF10 and Corning 9754. We observed different types of permanent modifications depending on the writing speed and the laser pulse energy. Index variations were measured at Δn>+0.055 in the chalcogenide glass while maintaining spectral transmission similar to the pristine materials before irradiation. This provides a good candidate to design optical components for infrared application and helps to unlock the potential of the femtosecond laser direct writing technique to implement at high writing speed and high index changes with low optical losses.


  • Open Access

    Femtosecond Laser Direct Writing of Gradient Index Fresnel Lens in GeS2-Based Chalcogenide Glass for Imaging Applications

    by Pierre Delullier, Guillaume Druart, Florence De La Barrière, Laurent Calvez, Matthieu Lancry

    Chalcogenide glasses have attracted growing interest for their potential to meet the demands of photonic applications in the Mid-Wavelength InfraRed (MWIR) and Long-Wavelength InfraRed (LWIR) transmission windows. In this work, we investigated the photosensitivity to femtosecond laser irradiation of a dedicated chalcogenide glass, along with its possible applications in micro-optics. In order to address the SWaP problem (Size, Weight and Power), this work took advantage of recent techniques in femtosecond laser direct writing to imprint flat and integrated optical systems. Here, we wanted to simplify an infrared multispectral imaging system which combines a lens array and a filter array. Each channel has a focal length of 7 mm and an f-number of 4. We show in this paper that the chosen GeS2-based chalcogenide glass is very promising for the fabrication of graded index optics by fs-laser writing, and particularly for the fabrication of Fresnel lenses. We note a very important phase variation capacity in this infrared material corresponding to refractive index variations up to +0.055. A prototype of Fresnel GRIN lens with a refractive index gradient was fabricated and optically characterized in the Vis range.


  • La vision comme source d’inspiration

    by Guillaume Druart, Florence De La Barrière, Nicolas Guérineau, Isabelle Ribet