Steffen Ziesche
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Steffen Ziesche has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Martin Ihle
Fraunhofer Institute for Ceramic Technologies and Systems (IKTS), Winterbergstr. 28, 01277 Dresden, Germany
2 shared publications - Andreas Schletz
Fraunhofer IISB
1 shared publication - Andreas Tuor1 shared publication
- Anna Kozlowska
Institute of Electronic Materials Technology
1 shared publication - Anne Aimable
Univ. Limoges, CNRS, IRCER, UMR 7315, F-87000 Limoges, France
1 shared publication - Bartosz Fetliński
Institute of Microelectronics and Optoelectronics, Warsaw University of Technology, Koszykowa 75, 00-665 Warsaw, Poland
1 shared publication
Latest Publications
- Open Access
- 11 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (18) , 9975
Naked-Eye Detection of Water Contaminants Enabled by Engineered Plasmonic Resonance in Hybrid Detector Systems
The quality of water supply and its contamination remain global issues. In this work we aim to propose a concept of a novel integrated device for label-free and real-time monitoring of water contaminants that may be performed without specialized equipment. By employing an effective model for describing interactions of a plasmonic nanoparticle-based sensing reflector and using a transfer matrix approach to determine optical properties of the complete system, we demonstrate that our integrated sensing device is able to change the color of emitted light in response to the change of optical properties of the surrounding medium, which enables naked-eye detection of water contaminants. Additionally, by employing dual plasmon resonance arising from resonances of nanoparticles and metal substrate, as well as interactions between them, it is possible to engineer emission efficiency and colorimetric properties of the sensor. We believe that the proposed device, due to its compactness, integrated form, and naked-eye and real-time detection capabilities, will address the current challenges in water quality monitoring.
- 11 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (18) , 9975
Open AccessNaked-Eye Detection of Water Contaminants Enabled by Engineered Plasmonic Resonance in Hybrid Detector Systems
The quality of water supply and its contamination remain global issues. In this work we aim to propose a concept of a novel integrated device for label-free and real-time monitoring of water contaminants that may be performed without specialized equipment. By employing an effective model for describing interactions of a plasmonic nanoparticle-based sensing reflector and using a transfer matrix approach to determine optical properties of the complete system, we demonstrate that our integrated sensing device is able to change the color of emitted light in response to the change of optical properties of the surrounding medium, which enables naked-eye detection of water contaminants. Additionally, by employing dual plasmon resonance arising from resonances of nanoparticles and metal substrate, as well as interactions between them, it is possible to engineer emission efficiency and colorimetric properties of the sensor. We believe that the proposed device, due to its compactness, integrated form, and naked-eye and real-time detection capabilities, will address the current challenges in water quality monitoring.
- Open Access
- 1 January 2023
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in International Symposium on Microelectronics
- Vol. 2023 (EMPC) , 419-423
Ceramic Embedding of SiC-Semiconductor Using Cofiring Technology
The presented work demonstrates our current state in embedding of SiC power electronic dies using Ceramic Multilayer Technology. The novelty of the approach presented includes the cofiring of a semiconductor element with ceramic base material, which demands for a reduced sintering temperature of ceramics (using LTCC or ULTCC based ceramics) in combination with an increased temperature stability of the semiconductor.
- 1 January 2023
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in International Symposium on Microelectronics
- Vol. 2023 (EMPC) , 419-423
Open AccessCeramic Embedding of SiC-Semiconductor Using Cofiring Technology
The presented work demonstrates our current state in embedding of SiC power electronic dies using Ceramic Multilayer Technology. The novelty of the approach presented includes the cofiring of a semiconductor element with ceramic base material, which demands for a reduced sintering temperature of ceramics (using LTCC or ULTCC based ceramics) in combination with an increased temperature stability of the semiconductor.
- 1 April 2020
- Vol. 11 (1) , 44-61
Circuit-Board-Integrated Transformers Design and Manufacture
- 2 July 2018
- Published by Emerald Publishing in Microelectronics International
- Vol. 35 (3) , 164-171
Low temperature co-fired ceramics technology for active eddy current turbocharger speed sensors
Purpose: The purpose of this paper is to analyze a presentation of eddy current sensing coils for the turbo charger speed measurement, which were manufactured with the low temperature co-fired ceramic (LTCC) technology. The goal is to be able to manufacture small robust coils with complex geometries and improved signal output. Design/methodology/approach: A crucial element for its performance is the quality factor of the embedded coil. Thanks to the use of the developed LTCC manufacturing processes, the lateral wounding distance of the printed coils can be reduced to 30 µm, and simultaneously, the aspect ratio should be enlarged compared to standard LTCC technologies. By the use of a novel printed double-D coil design, the overall sensor characteristics will be improved. Findings: The metallization thickness can be simultaneously enhanced that results in the internal resistance being reduced. Thus, the inductivity and the ohmic resistance achieve an obvious optimization that results in significant improvement of the quality factor of the novel coils when compared to standard technologies. Embedded micro coils have a sintered metallization aspect ratio of more than one and thus an optimal performance differing clearly from prior art. Their reliability was proven through temperature cycle tests of over more than 1,300 h. Research limitations/implications: The developed LTCC coil technology will be introduced in the JAQUET sensor portfolio of TE Connectivity for the measurement of turbocharger speed on both passenger cars and trucks. The measurement and control of turbochargers speed enables the optimal regulation of airflow into the engine thereby improving the fuel economy and leading to a reduction of engine emissions. Originality/value: This paper shows fabrication and performance of the original manufactured LTCC coil for turbocharger speed sensors and its optimized signal output by the novel design.
- 2 July 2018
- Published by Emerald Publishing in Microelectronics International
- Vol. 35 (3) , 164-171
Low temperature co-fired ceramics technology for active eddy current turbocharger speed sensors
Purpose: The purpose of this paper is to analyze a presentation of eddy current sensing coils for the turbo charger speed measurement, which were manufactured with the low temperature co-fired ceramic (LTCC) technology. The goal is to be able to manufacture small robust coils with complex geometries and improved signal output. Design/methodology/approach: A crucial element for its performance is the quality factor of the embedded coil. Thanks to the use of the developed LTCC manufacturing processes, the lateral wounding distance of the printed coils can be reduced to 30 µm, and simultaneously, the aspect ratio should be enlarged compared to standard LTCC technologies. By the use of a novel printed double-D coil design, the overall sensor characteristics will be improved. Findings: The metallization thickness can be simultaneously enhanced that results in the internal resistance being reduced. Thus, the inductivity and the ohmic resistance achieve an obvious optimization that results in significant improvement of the quality factor of the novel coils when compared to standard technologies. Embedded micro coils have a sintered metallization aspect ratio of more than one and thus an optimal performance differing clearly from prior art. Their reliability was proven through temperature cycle tests of over more than 1,300 h. Research limitations/implications: The developed LTCC coil technology will be introduced in the JAQUET sensor portfolio of TE Connectivity for the measurement of turbocharger speed on both passenger cars and trucks. The measurement and control of turbochargers speed enables the optimal regulation of airflow into the engine thereby improving the fuel economy and leading to a reduction of engine emissions. Originality/value: This paper shows fabrication and performance of the original manufactured LTCC coil for turbocharger speed sensors and its optimized signal output by the novel design.
- 1 September 2012
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in Additional Conferences (Device Packaging, Hitec, Hiten, & Cicmt)
- Vol. 2012 (CICMT) , 000025-000029
High current conductors in LTCC
The publication discusses the possibilities of integrating high cross section - metallization structures within fired LTCC substrates. After comparison of different methods for building such metallization structures it focuses on laser ablation to form channel structures, which will be further filled by stencil printing. Furthermore the variants of firing LTCC substrates with high amounts of metallization are discussed and our chosen solution is presented. Finally the processed LTCC substrates are characterized and their ampacities discussed.
- 1 September 2012
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in Additional Conferences (Device Packaging, Hitec, Hiten, & Cicmt)
- Vol. 2012 (CICMT) , 000025-000029
High current conductors in LTCC
The publication discusses the possibilities of integrating high cross section - metallization structures within fired LTCC substrates. After comparison of different methods for building such metallization structures it focuses on laser ablation to form channel structures, which will be further filled by stencil printing. Furthermore the variants of firing LTCC substrates with high amounts of metallization are discussed and our chosen solution is presented. Finally the processed LTCC substrates are characterized and their ampacities discussed.
- 1 September 2011
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in Additional Conferences (Device Packaging, Hitec, Hiten, & Cicmt)
- Vol. 2011 (CICMT) , 000029-000032
Ceramic Interface and Multilayer Technology for Micro Fuel Cells
Planar fuel cells typically consist of several functional layers stacked on top of each other. We have extended the concepts of multilayer ceramics and thick film technology to provide novel approaches for the design of extremely compact and cost efficient micro fuel cells, either for the high temperature operation (SOFC) or for near ambient operation (PEMFC). Solid oxide fuel cells (SOFCs) operate at temperatures as high as 850°C. Several ceramic technologies were developed to facilitate mechanical integrity and good electrical contact to the cell at these high operating temperatures and upon rapid thermal cycling. Ceramic interconnector plates can be manufactured by adapting the multilayer / thick film / via approach known from LTCC to HTCC multilayers such as zirconia. The result is a 3D shaped SOFC interconnector plate with an unparalleled thermomechancial stability and rigidity for special applications like military. Extending that HTCC functionalisation approach further led us to the manufacturing of other multilayer ceramic based micro-reactors, namely micro-reformers for hydrogen production on a pocket size scale. We have combined several high throughput 3D shaping technologies with novel catalyst coating approaches to yield micro-reactors that are cost efficient to manufacture and that expose a high inner catalytically active surface at a low pressure drop. We have also applied thick film technologies to incorporate additional functions such as sensors or heaters right into the multilayer. The contribution is concluded with a summary of the crucial shaping and coating technologies and an outlook on how these can be applied to future compact SOFC and PEMFC fuel cells.
- 1 September 2011
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in Additional Conferences (Device Packaging, Hitec, Hiten, & Cicmt)
- Vol. 2011 (CICMT) , 000029-000032
Ceramic Interface and Multilayer Technology for Micro Fuel Cells
Planar fuel cells typically consist of several functional layers stacked on top of each other. We have extended the concepts of multilayer ceramics and thick film technology to provide novel approaches for the design of extremely compact and cost efficient micro fuel cells, either for the high temperature operation (SOFC) or for near ambient operation (PEMFC). Solid oxide fuel cells (SOFCs) operate at temperatures as high as 850°C. Several ceramic technologies were developed to facilitate mechanical integrity and good electrical contact to the cell at these high operating temperatures and upon rapid thermal cycling. Ceramic interconnector plates can be manufactured by adapting the multilayer / thick film / via approach known from LTCC to HTCC multilayers such as zirconia. The result is a 3D shaped SOFC interconnector plate with an unparalleled thermomechancial stability and rigidity for special applications like military. Extending that HTCC functionalisation approach further led us to the manufacturing of other multilayer ceramic based micro-reactors, namely micro-reformers for hydrogen production on a pocket size scale. We have combined several high throughput 3D shaping technologies with novel catalyst coating approaches to yield micro-reactors that are cost efficient to manufacture and that expose a high inner catalytically active surface at a low pressure drop. We have also applied thick film technologies to incorporate additional functions such as sensors or heaters right into the multilayer. The contribution is concluded with a summary of the crucial shaping and coating technologies and an outlook on how these can be applied to future compact SOFC and PEMFC fuel cells.
- 30 September 2008
- Published by Elsevier in Solid State Ionics
- Vol. 179 (27-32) , 1351-1353
Permeation and oxygen exchange of Ln2Ni0.8Cu0.2O4-materials (Ln = La, Pr, Nd)
- 30 September 2008
- Published by Elsevier in Solid State Ionics
- Vol. 179 (27-32) , 1351-1353
Permeation and oxygen exchange of Ln2Ni0.8Cu0.2O4-materials (Ln = La, Pr, Nd)