Martin Ihle
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Martin Ihle has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Steffen Ziesche
Fraunhofer Institute for Ceramic Technologies and Systems (IKTS), Winterbergstr. 28, 01277 Dresden, Germany
2 shared publications Adrian Goldberg
1 shared publication- Andreas Tuor1 shared publication
- Anna Kozlowska
Institute of Electronic Materials Technology
1 shared publication - Anne Aimable
Univ. Limoges, CNRS, IRCER, UMR 7315, F-87000 Limoges, France
1 shared publication - Bartosz Fetliński
Institute of Microelectronics and Optoelectronics, Warsaw University of Technology, Koszykowa 75, 00-665 Warsaw, Poland
1 shared publication
Latest Publications
- Open Access
- 11 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (18) , 9975
Naked-Eye Detection of Water Contaminants Enabled by Engineered Plasmonic Resonance in Hybrid Detector Systems
The quality of water supply and its contamination remain global issues. In this work we aim to propose a concept of a novel integrated device for label-free and real-time monitoring of water contaminants that may be performed without specialized equipment. By employing an effective model for describing interactions of a plasmonic nanoparticle-based sensing reflector and using a transfer matrix approach to determine optical properties of the complete system, we demonstrate that our integrated sensing device is able to change the color of emitted light in response to the change of optical properties of the surrounding medium, which enables naked-eye detection of water contaminants. Additionally, by employing dual plasmon resonance arising from resonances of nanoparticles and metal substrate, as well as interactions between them, it is possible to engineer emission efficiency and colorimetric properties of the sensor. We believe that the proposed device, due to its compactness, integrated form, and naked-eye and real-time detection capabilities, will address the current challenges in water quality monitoring.
- 11 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (18) , 9975
Open AccessNaked-Eye Detection of Water Contaminants Enabled by Engineered Plasmonic Resonance in Hybrid Detector Systems
The quality of water supply and its contamination remain global issues. In this work we aim to propose a concept of a novel integrated device for label-free and real-time monitoring of water contaminants that may be performed without specialized equipment. By employing an effective model for describing interactions of a plasmonic nanoparticle-based sensing reflector and using a transfer matrix approach to determine optical properties of the complete system, we demonstrate that our integrated sensing device is able to change the color of emitted light in response to the change of optical properties of the surrounding medium, which enables naked-eye detection of water contaminants. Additionally, by employing dual plasmon resonance arising from resonances of nanoparticles and metal substrate, as well as interactions between them, it is possible to engineer emission efficiency and colorimetric properties of the sensor. We believe that the proposed device, due to its compactness, integrated form, and naked-eye and real-time detection capabilities, will address the current challenges in water quality monitoring.
- 2 July 2018
- Published by Emerald Publishing in Microelectronics International
- Vol. 35 (3) , 164-171
Low temperature co-fired ceramics technology for active eddy current turbocharger speed sensors
Purpose: The purpose of this paper is to analyze a presentation of eddy current sensing coils for the turbo charger speed measurement, which were manufactured with the low temperature co-fired ceramic (LTCC) technology. The goal is to be able to manufacture small robust coils with complex geometries and improved signal output. Design/methodology/approach: A crucial element for its performance is the quality factor of the embedded coil. Thanks to the use of the developed LTCC manufacturing processes, the lateral wounding distance of the printed coils can be reduced to 30 µm, and simultaneously, the aspect ratio should be enlarged compared to standard LTCC technologies. By the use of a novel printed double-D coil design, the overall sensor characteristics will be improved. Findings: The metallization thickness can be simultaneously enhanced that results in the internal resistance being reduced. Thus, the inductivity and the ohmic resistance achieve an obvious optimization that results in significant improvement of the quality factor of the novel coils when compared to standard technologies. Embedded micro coils have a sintered metallization aspect ratio of more than one and thus an optimal performance differing clearly from prior art. Their reliability was proven through temperature cycle tests of over more than 1,300 h. Research limitations/implications: The developed LTCC coil technology will be introduced in the JAQUET sensor portfolio of TE Connectivity for the measurement of turbocharger speed on both passenger cars and trucks. The measurement and control of turbochargers speed enables the optimal regulation of airflow into the engine thereby improving the fuel economy and leading to a reduction of engine emissions. Originality/value: This paper shows fabrication and performance of the original manufactured LTCC coil for turbocharger speed sensors and its optimized signal output by the novel design.
- 2 July 2018
- Published by Emerald Publishing in Microelectronics International
- Vol. 35 (3) , 164-171
Low temperature co-fired ceramics technology for active eddy current turbocharger speed sensors
Purpose: The purpose of this paper is to analyze a presentation of eddy current sensing coils for the turbo charger speed measurement, which were manufactured with the low temperature co-fired ceramic (LTCC) technology. The goal is to be able to manufacture small robust coils with complex geometries and improved signal output. Design/methodology/approach: A crucial element for its performance is the quality factor of the embedded coil. Thanks to the use of the developed LTCC manufacturing processes, the lateral wounding distance of the printed coils can be reduced to 30 µm, and simultaneously, the aspect ratio should be enlarged compared to standard LTCC technologies. By the use of a novel printed double-D coil design, the overall sensor characteristics will be improved. Findings: The metallization thickness can be simultaneously enhanced that results in the internal resistance being reduced. Thus, the inductivity and the ohmic resistance achieve an obvious optimization that results in significant improvement of the quality factor of the novel coils when compared to standard technologies. Embedded micro coils have a sintered metallization aspect ratio of more than one and thus an optimal performance differing clearly from prior art. Their reliability was proven through temperature cycle tests of over more than 1,300 h. Research limitations/implications: The developed LTCC coil technology will be introduced in the JAQUET sensor portfolio of TE Connectivity for the measurement of turbocharger speed on both passenger cars and trucks. The measurement and control of turbochargers speed enables the optimal regulation of airflow into the engine thereby improving the fuel economy and leading to a reduction of engine emissions. Originality/value: This paper shows fabrication and performance of the original manufactured LTCC coil for turbocharger speed sensors and its optimized signal output by the novel design.
- 1 September 2012
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in Additional Conferences (Device Packaging, Hitec, Hiten, & Cicmt)
- Vol. 2012 (CICMT) , 000071-000076
Aerosol Printing of High Resolution Films for LTCC-Multilayer Components
For the electronic packaging of sensor stable and cost-efficient fine-line printing technologies on LTCC and high frequency laminates are needed. Especially common technologies like screen printing and thin film techniques are unsuitable for fine structures or too expensive. In addition there is no direct write technology for 3D-LTCC-designs as well as for high reliability Co-firing structures. Closing this gap the aerosol printing technology is used to print high resolution conductors on planar and non-planar substrates. Aerosol printing is a direct write non-contact printing technology of functional layers. After a pneumatic atomization the ink is transformed into 1 to 5 μm droplets. The resulting, continuous aerosol stream is focused by a sheath gas in the printing head. Thus the long standoff distance between substrate and deposition tip of max. 5 mm allows the 3D-printing on non-planar substrates. With optimized inks and printing parameters line widths of 10 μm are achievable. This paper will present applications for aerosol printed functional layers on LTCC. These are, for example, aerosol printed films embedded in co-fired LTCC, fine line structures for high frequency applications and the evaluation of printed 3D-structures like LTCC-stairways. Furthermore the 90 degree contacting of unconventional sensor designs will be presented.
- 1 September 2012
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in Additional Conferences (Device Packaging, Hitec, Hiten, & Cicmt)
- Vol. 2012 (CICMT) , 000071-000076
Aerosol Printing of High Resolution Films for LTCC-Multilayer Components
For the electronic packaging of sensor stable and cost-efficient fine-line printing technologies on LTCC and high frequency laminates are needed. Especially common technologies like screen printing and thin film techniques are unsuitable for fine structures or too expensive. In addition there is no direct write technology for 3D-LTCC-designs as well as for high reliability Co-firing structures. Closing this gap the aerosol printing technology is used to print high resolution conductors on planar and non-planar substrates. Aerosol printing is a direct write non-contact printing technology of functional layers. After a pneumatic atomization the ink is transformed into 1 to 5 μm droplets. The resulting, continuous aerosol stream is focused by a sheath gas in the printing head. Thus the long standoff distance between substrate and deposition tip of max. 5 mm allows the 3D-printing on non-planar substrates. With optimized inks and printing parameters line widths of 10 μm are achievable. This paper will present applications for aerosol printed functional layers on LTCC. These are, for example, aerosol printed films embedded in co-fired LTCC, fine line structures for high frequency applications and the evaluation of printed 3D-structures like LTCC-stairways. Furthermore the 90 degree contacting of unconventional sensor designs will be presented.