Rachid Driad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rachid Driad has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Lutz Kirste
Fraunhofer Institute for Applied Solid State Physics (IAF)
2 shared publications O. Ambacher
Fraunhofer Institute for Applied Solid State Physics, Tullastr. 72, 79108 Freiburg, Germany
2 shared publicationsR. Aidam
Fraunhofer Institute for Applied Solid State Physics (Germany)
2 shared publications- Wolfgang Bronner
Fraunhofer-Institut für Angewandte Festkörperphysik (Germany)
2 shared publications C.‐C. Röhlig
Fraunhofer Institute for Applied Solid State Physics, Tullastr. 72, 79108 Freiburg, Germany
1 shared publicationChristian Schilling
Fraunhofer Institute for Applied Solid State Physics, Freiburg, Germany
1 shared publication
Latest Publications
- 11 December 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 19 (4) , 1200108
Correlation Between Noise Properties and Coherent Coupling of Lateral Modes in Quantum Cascade Lasers
We report on investigations of far-field intensity patterns and angle-resolved lasing spectra emitted from quantum cascade (QC) lasers at wavelengths around λ = 7.7 μm in pulsed operation. Measurements of the angle-dependent intensity noise in the far-field reveal that small driving currents lead to an incoherent superposition of multiple lateral cavity modes. Elevated currents result in a phase-coupled superposition of the light fields arising from the excited lateral modes. This superposition leads to beam steering and strong pulse-to-pulse intensity fluctuations. We present for both the incoherent and the phase-coupled superposition, a model which allows us to explain the observed far-field intensity patterns and their noise properties. The angle-resolved lasing spectra of the investigated QC lasers show distinct sets of longitudinal modes with distinctively different dependences of the lasing spectrum on the far-field angle. They can be assigned to the incoherent and the phase-coupled superposition of the lateral modes.
- 11 December 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 19 (4) , 1200108
Correlation Between Noise Properties and Coherent Coupling of Lateral Modes in Quantum Cascade Lasers
We report on investigations of far-field intensity patterns and angle-resolved lasing spectra emitted from quantum cascade (QC) lasers at wavelengths around λ = 7.7 μm in pulsed operation. Measurements of the angle-dependent intensity noise in the far-field reveal that small driving currents lead to an incoherent superposition of multiple lateral cavity modes. Elevated currents result in a phase-coupled superposition of the light fields arising from the excited lateral modes. This superposition leads to beam steering and strong pulse-to-pulse intensity fluctuations. We present for both the incoherent and the phase-coupled superposition, a model which allows us to explain the observed far-field intensity patterns and their noise properties. The angle-resolved lasing spectra of the investigated QC lasers show distinct sets of longitudinal modes with distinctively different dependences of the lasing spectrum on the far-field angle. They can be assigned to the incoherent and the phase-coupled superposition of the lateral modes.
- 1 May 2012
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8373, 83732G
Broadband tunable external cavity quantum cascade lasers for standoff detection of explosives
We demonstrate contactless detection of solid residues of explosives using mid-infrared laser spectroscopy. Our detection scheme relies on active laser illumination, synchronized with the collection of the backscattered radiation by an infrared camera. The key component of the system is an external cavity quantum cascade laser with a tuning range of 300 cm-1 centered at 1220 cm-1. Residues of TNT (trinitrotoluene), PETN (pentaerythritol tetranitrate) and RDX (cyclotrimethylenetrinitramine) could be identified and discriminated against non-hazardous materials by scanning the illumination wavelength over several of the characteristic absorption features of the explosives.
- 1 May 2012
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8373, 83732G
Broadband tunable external cavity quantum cascade lasers for standoff detection of explosives
We demonstrate contactless detection of solid residues of explosives using mid-infrared laser spectroscopy. Our detection scheme relies on active laser illumination, synchronized with the collection of the backscattered radiation by an infrared camera. The key component of the system is an external cavity quantum cascade laser with a tuning range of 300 cm-1 centered at 1220 cm-1. Residues of TNT (trinitrotoluene), PETN (pentaerythritol tetranitrate) and RDX (cyclotrimethylenetrinitramine) could be identified and discriminated against non-hazardous materials by scanning the illumination wavelength over several of the characteristic absorption features of the explosives.
- 2 November 2011
- Published by Wiley in physica status solidi (c)
- Vol. 9 (2) , 381-384
Hafnium oxide passivation of InGaAs/InP heterostructure bipolar transistors by electron beam evaporation
In this contribution, we investigate the passivation of InGaAs/InP heterostructures using plasma assisted e‐beam evaporated hafnium oxide (HfO2). The microstructure and optical properties of the HfO2 layers are first examined by X‐ray reflectivity and spectroscopic ellipsometry on Si substrates. The current gain and breakdown voltage of InGaAs/InP heterostructure bipolar transistors (HBTs) have subsequently been used to evaluate the impact and efficiency of the e‐beam evaporated HfO2 passivation layers. The results from these structures have been contrasted with data from similar samples encapsulated with SiO2 using conventional plasma enhanced chemical vapor deposition. The HfO2 passivated InGaAs/InP HBTs show comparable current gains as compared to unpassivated structures. More importantly, in contrast to SiO2‐PECVD devices, the common emitter characteristics of HfO2 passivated HBTs show no degradation in device breakdown voltage.
- 2 November 2011
- Published by Wiley in physica status solidi (c)
- Vol. 9 (2) , 381-384
Hafnium oxide passivation of InGaAs/InP heterostructure bipolar transistors by electron beam evaporation
In this contribution, we investigate the passivation of InGaAs/InP heterostructures using plasma assisted e‐beam evaporated hafnium oxide (HfO2). The microstructure and optical properties of the HfO2 layers are first examined by X‐ray reflectivity and spectroscopic ellipsometry on Si substrates. The current gain and breakdown voltage of InGaAs/InP heterostructure bipolar transistors (HBTs) have subsequently been used to evaluate the impact and efficiency of the e‐beam evaporated HfO2 passivation layers. The results from these structures have been contrasted with data from similar samples encapsulated with SiO2 using conventional plasma enhanced chemical vapor deposition. The HfO2 passivated InGaAs/InP HBTs show comparable current gains as compared to unpassivated structures. More importantly, in contrast to SiO2‐PECVD devices, the common emitter characteristics of HfO2 passivated HBTs show no degradation in device breakdown voltage.
- 20 June 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 58 (8) , 2604-2609
InP DHBT-Based IC Technology for 100-Gb/s Ethernet
It is now clear that 112-Gb/s data rate is the next step in the network evolution (100-Gb/s Ethernet). Due to its high speed and high breakdown voltage, the InP double-heterojunction bipolar transistor (DHBT) technology is particularly suited for signal processing and high-speed communication systems. This paper summarizes our InP DHBT device and integrated circuit (IC) technology developed for >; 100-Gb/s-class medium scale mixed-signal ICs. Key features and issues important for the growth and manufacturing of InP DHBTs with step-graded collectors are first discussed. The molecular-beam-epitaxy-grown transistors have cut-off frequencies (fT and fmax) of over 350 GHz, current gains of ~90, and common-emitter breakdown voltages of >; 4.5 V. Using this technology, we then fabricated and succeeded in 112-Gb/s testing of multiplexers and integrated clock and data recovery/1:2 demultiplexer ICs and modules with very clear eye waveforms. Using the same technology, a distributed amplifier intended for use as a modulator driver exhibited an output voltage swing of ~2 Vpp. These building-block ICs combine high-speed operation with high signal quality and enable 112-Gb/s optical fiber transmission.
- 20 June 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 58 (8) , 2604-2609
InP DHBT-Based IC Technology for 100-Gb/s Ethernet
It is now clear that 112-Gb/s data rate is the next step in the network evolution (100-Gb/s Ethernet). Due to its high speed and high breakdown voltage, the InP double-heterojunction bipolar transistor (DHBT) technology is particularly suited for signal processing and high-speed communication systems. This paper summarizes our InP DHBT device and integrated circuit (IC) technology developed for >; 100-Gb/s-class medium scale mixed-signal ICs. Key features and issues important for the growth and manufacturing of InP DHBTs with step-graded collectors are first discussed. The molecular-beam-epitaxy-grown transistors have cut-off frequencies (fT and fmax) of over 350 GHz, current gains of ~90, and common-emitter breakdown voltages of >; 4.5 V. Using this technology, we then fabricated and succeeded in 112-Gb/s testing of multiplexers and integrated clock and data recovery/1:2 demultiplexer ICs and modules with very clear eye waveforms. Using the same technology, a distributed amplifier intended for use as a modulator driver exhibited an output voltage swing of ~2 Vpp. These building-block ICs combine high-speed operation with high signal quality and enable 112-Gb/s optical fiber transmission.
- 24 January 2011
- Published by AIP Publishing in Applied Physics Letters
- Vol. 98 (4) , 043503
InP-based heterojunction bipolar transistors with InGaAs/GaAs strained-layer-superlattice
In this paper, we report the design, fabrication, and characterization of an InP/InGaAs heterojunction bipolar transistor (HBT) employing a lattice-mismatched strained-layer-superlattice (SLS) base structure. The performance of the SLS-base device is also compared with that of an uniform-base structure. The digitally graded-base devices exhibit a slightly lower gain at low bias voltage and a higher current gain at high currents. While the offset voltage remains comparable in the two structures, the graded-base InP/InGaAs HBTs, with built-in fields of , have typically a maximum dc current gain of 18% larger than that of transistors with uniform base.- 24 January 2011
- Published by AIP Publishing in Applied Physics Letters
- Vol. 98 (4) , 043503
InP-based heterojunction bipolar transistors with InGaAs/GaAs strained-layer-superlattice
In this paper, we report the design, fabrication, and characterization of an InP/InGaAs heterojunction bipolar transistor (HBT) employing a lattice-mismatched strained-layer-superlattice (SLS) base structure. The performance of the SLS-base device is also compared with that of an uniform-base structure. The digitally graded-base devices exhibit a slightly lower gain at low bias voltage and a higher current gain at high currents. While the offset voltage remains comparable in the two structures, the graded-base InP/InGaAs HBTs, with built-in fields of , have typically a maximum dc current gain of 18% larger than that of transistors with uniform base.- 1 January 2011
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (5) , H561-H564
Investigation of NiCr Thin Film Resistors for InP-Based Monolithic Microwave Integrated Circuits (MMICs)
We report a systematic study of nickel chrome (NiCr) thin film resistors (TFRs) used as resistors in InP-based monolithic microwave integrated circuits (MMICs). The effects of fabrication process parameters (such as surface treatments or thermal cycles) and substrate materials on the electrical properties of NiCr TFRs are discussed. After completion of MMIC fabrication, the NiCr thin film resistors were found to exhibit lower sheet resistance (Rsh) as compared to the as-deposited films. The origin of this variation has been found to be mainly related to the post-NiCr thermal cycles involved in the IC process technology. In contrast, the Rsh values of NiCr TFRs deposited on GaAs or SiNx coated substrates were almost unaffected by thermal annealing. Hence, a thin SiNx passivation layer on the InP substrate has been integrated in the InP-based MMIC process to avoid the NiCr-InP interaction. As a result, NiCr thin film resistors with high sheet resistance uniformity and reproducibility, as well as low temperature coefficient of resistance (TCR) have been achieved. Moreover, the use of a SiNx layer on the InP substrate was also found to improve the inter-device isolation.
- 1 January 2011
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (5) , H561-H564
Investigation of NiCr Thin Film Resistors for InP-Based Monolithic Microwave Integrated Circuits (MMICs)
We report a systematic study of nickel chrome (NiCr) thin film resistors (TFRs) used as resistors in InP-based monolithic microwave integrated circuits (MMICs). The effects of fabrication process parameters (such as surface treatments or thermal cycles) and substrate materials on the electrical properties of NiCr TFRs are discussed. After completion of MMIC fabrication, the NiCr thin film resistors were found to exhibit lower sheet resistance (Rsh) as compared to the as-deposited films. The origin of this variation has been found to be mainly related to the post-NiCr thermal cycles involved in the IC process technology. In contrast, the Rsh values of NiCr TFRs deposited on GaAs or SiNx coated substrates were almost unaffected by thermal annealing. Hence, a thin SiNx passivation layer on the InP substrate has been integrated in the InP-based MMIC process to avoid the NiCr-InP interaction. As a result, NiCr thin film resistors with high sheet resistance uniformity and reproducibility, as well as low temperature coefficient of resistance (TCR) have been achieved. Moreover, the use of a SiNx layer on the InP substrate was also found to improve the inter-device isolation.
- 8 November 2010
- Published by Wiley in physica status solidi (c)
- Vol. 8 (2) , 476-478
AlN based microgenerators for powering implantable sensor devices
- 8 November 2010
- Published by Wiley in physica status solidi (c)
- Vol. 8 (2) , 476-478
AlN based microgenerators for powering implantable sensor devices