Charles Brecher
Research Subjects
Charles Brecher has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Edgar van Loef
Radiation Monitoring Devices, Inc., Watertown, MA, USA
2 shared publications A. Lempicki
ALEM Associates, 303A Commonwealth Avenue, Boston, MA 02115, USA telephone: 617-668-6953
1 shared publicationAlex Lempicki
ALEM Associates, Watertown, MA 02472 USA
1 shared publication- Alex Lempicki
ALEM Associates, 44 Hunt Street, Watertown, MA, 02472, United States
1 shared publication E. E. Ovechkina
Radiation Monitoring Devices (RMD), Inc., 44 Hunt Street, Watertown, MA 02472 USA telephone: 617-926-1167
1 shared publicationJarek Glodo
Radiation Monitoring Devices Inc., Watertown, MA 02472 USA. phone: 617-668-6922; fax: 617-926-9980
1 shared publication
Latest Publications
- 1 January 2007
- Published by Springer Nature in MRS Proceedings
- Vol. 1038
Recent Advances in Ceramic Scintillators
- 1 January 2007
- Published by Springer Nature in MRS Proceedings
- Vol. 1038
Recent Advances in Ceramic Scintillators
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3 (10823654) , 1538-1540
Scintillation Properties of SrHfO/sub 3/:Ce/sup 3+/ and BaHfO/sub 3/:Ce/sup 3+/ Ceramics
In this paper we report on the scintillation properties of cerium doped strontium - and barium hafnate. Radioluminescence, pulse height, scintillation decay and timing spectra are presented. Radioluminescence spectra of SrHfO3:Ce3+ and BaHfO3:Ce3+ consist of a broad band due to Ce3+ emission peaking at 410 nm and 400 nm, respectively. The light yield of BaHfO3:Ce3+ and SrHfO3:Ce3+ transparent optical ceramic is approximately 40,000 photons/MeV when compared to a crystal of BGO. The principal decay time constant for SrHfO3:Ce3+ and BaHfO3:Ce3+ is 15 and 16 ns, respectively. A timing resolution of 276 ps (FWHM) was obtained with transparent optical ceramic of SrHfO3:Ce3+.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3 (10823654) , 1538-1540
Scintillation Properties of SrHfO/sub 3/:Ce/sup 3+/ and BaHfO/sub 3/:Ce/sup 3+/ Ceramics
In this paper we report on the scintillation properties of cerium doped strontium - and barium hafnate. Radioluminescence, pulse height, scintillation decay and timing spectra are presented. Radioluminescence spectra of SrHfO3:Ce3+ and BaHfO3:Ce3+ consist of a broad band due to Ce3+ emission peaking at 410 nm and 400 nm, respectively. The light yield of BaHfO3:Ce3+ and SrHfO3:Ce3+ transparent optical ceramic is approximately 40,000 photons/MeV when compared to a crystal of BGO. The principal decay time constant for SrHfO3:Ce3+ and BaHfO3:Ce3+ is 15 and 16 ns, respectively. A timing resolution of 276 ps (FWHM) was obtained with transparent optical ceramic of SrHfO3:Ce3+.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 6 (10823654) , 3567-3570
Suppression Of Afterglow In CsI(Tl) By Codoping With Eu/sup 2+/: Fabrication Of Microcolumnar Films For High-Resolution High-Speed Imaging
Although CsI:Tl is one of the brightest and most efficient scintillator materials ever developed, its applicability for high speed imaging is limited by its persistent afterglow. We have demonstrated that much of this afterglow can be suppressed by the addition of Eu2+ to the CsI host lattice. The magnitude of the effect depends strongly on the duration of the excitation pulse, but is virtually independent of its intensity. Our observations indicate that the presence of Eu2+ ions introduces a set of electron traps that fundamentally alter the decay kinetics, making the material useful for such applications as high speed radiography and, perhaps, X-ray CT. At RMD several single crystals of CsI:Tl,Eu with Eu2+ concentrations between 0.05 to 0.5 mole percent have been grown using the Bridgman technique. Here we report on our fabrication of microcolumnar films of the material using thermal vapor deposition for high-resolution digital radiography applications. Our data suggests that the afterglow suppression effect has a profound impact on high speed imaging performance, allowing rapid data acquisition with substantially reduced persistence from previous frames. The latest results on the effect of the codopant on the luminescence from CsI:Tl crystals as well as microcolumnar films will be reported.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 6 (10823654) , 3567-3570
Suppression Of Afterglow In CsI(Tl) By Codoping With Eu/sup 2+/: Fabrication Of Microcolumnar Films For High-Resolution High-Speed Imaging
Although CsI:Tl is one of the brightest and most efficient scintillator materials ever developed, its applicability for high speed imaging is limited by its persistent afterglow. We have demonstrated that much of this afterglow can be suppressed by the addition of Eu2+ to the CsI host lattice. The magnitude of the effect depends strongly on the duration of the excitation pulse, but is virtually independent of its intensity. Our observations indicate that the presence of Eu2+ ions introduces a set of electron traps that fundamentally alter the decay kinetics, making the material useful for such applications as high speed radiography and, perhaps, X-ray CT. At RMD several single crystals of CsI:Tl,Eu with Eu2+ concentrations between 0.05 to 0.5 mole percent have been grown using the Bridgman technique. Here we report on our fabrication of microcolumnar films of the material using thermal vapor deposition for high-resolution digital radiography applications. Our data suggests that the afterglow suppression effect has a profound impact on high speed imaging performance, allowing rapid data acquisition with substantially reduced persistence from previous frames. The latest results on the effect of the codopant on the luminescence from CsI:Tl crystals as well as microcolumnar films will be reported.