Xueyan Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xueyan Liu has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
- Sandra Erkens
Department of Engineering Structures, Delft University of Technology, Delft, Netherlands
20 shared publications Kumar Anupam
12 shared publicationsTan Yiqiu
12 shared publications- Peng Lin
Section of Pavement Engineering, Department of Engineering Structures, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Stevinweg 1, 2628 CN Delft, the Netherlands
8 shared publications - Athanasios Scarpas
Delft University of Technology
7 shared publications - Panos Apostolidis
Section of Pavement Engineering, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft, The Netherlands
6 shared publications
Latest Publications
- Open Access
Understanding the Limitations of Modifying Bitumen with Re-Refined Engine Oil Bottom (REOB)
The evolving bitumen market is increasingly complex due to variations in crude sources and transitions in refining processes, affecting the properties of bitumen. Unexpected additions of materials to alter bitumen’s properties could occur, where traditional PEN grade testing fails to detect modifications by inclusion of, for example, Re-refined Engine Oil Bottoms. This is the first study to comprehensively compare REOBs from European vs. North American sources and assess their effects on binder performance in a unified framework, performed by assessing the REOB-modified binders by identification, stability, compatibility, ageing susceptibility, and low-temperature properties. Two series of REOB-modified bitumen were prepared by blending 5, 10, and 15 wt.% REOB into hard grade bitumen. Results showed increased carbonyl formations (likely caused by lubricant additives) and phase instability during storage which can be attributed to saturates exudation. Rheological assessment demonstrated that REOB softens bitumen, although ageing causes a pronounced gain in stiffness. Low temperature rheological measurements showed that REOB-modified bitumen is prone to brittle fracture, suggesting a loss of relaxation properties. This study highlights that REOB is a material of inconsistent nature, with complex interactions with molecular groups of the base bitumen, causing increased ageing, phase instability, and brittle fracture susceptibilities.
Open AccessUnderstanding the Limitations of Modifying Bitumen with Re-Refined Engine Oil Bottom (REOB)
The evolving bitumen market is increasingly complex due to variations in crude sources and transitions in refining processes, affecting the properties of bitumen. Unexpected additions of materials to alter bitumen’s properties could occur, where traditional PEN grade testing fails to detect modifications by inclusion of, for example, Re-refined Engine Oil Bottoms. This is the first study to comprehensively compare REOBs from European vs. North American sources and assess their effects on binder performance in a unified framework, performed by assessing the REOB-modified binders by identification, stability, compatibility, ageing susceptibility, and low-temperature properties. Two series of REOB-modified bitumen were prepared by blending 5, 10, and 15 wt.% REOB into hard grade bitumen. Results showed increased carbonyl formations (likely caused by lubricant additives) and phase instability during storage which can be attributed to saturates exudation. Rheological assessment demonstrated that REOB softens bitumen, although ageing causes a pronounced gain in stiffness. Low temperature rheological measurements showed that REOB-modified bitumen is prone to brittle fracture, suggesting a loss of relaxation properties. This study highlights that REOB is a material of inconsistent nature, with complex interactions with molecular groups of the base bitumen, causing increased ageing, phase instability, and brittle fracture susceptibilities.
- Open Access
- 30 November 2024
- Published by Elsevier in Materials & Design
- Vol. 248
Predicting the diffusion coefficients of rejuvenators into bitumens using molecular dynamics, machine learning, and force field atom types
- 30 November 2024
- Published by Elsevier in Materials & Design
- Vol. 248
Open AccessPredicting the diffusion coefficients of rejuvenators into bitumens using molecular dynamics, machine learning, and force field atom types
- Open Access
Influence of Reed Fiber Length and Dosage on the Properties of Reed-Fiber-Modified Bitumen and Bituminous Mortar
In order to explore the feasibility and efficacy of reed-fiber-modified bitumen (RFMB), three lengths and three dosages of reed fibers were selected to modify bitumen and bituminous mortar, while the physicochemical properties of RFMB and RFMB mortar were analyzed. In this work, FTIR spectroscopy was employed to characterize the chemical impact of fiber on bitumen. The viscidity and rheology of RFMB and the tensile strength of RFMB mortar were evaluated using a Brookfield viscometer, dynamic shear rheometer, and monotonic tensile test. The results showed that adding fibers primarily affects the physical structure rather than the chemical composition of bitumen, confirmed by FTIR spectroscopy. RFMB viscosity increased with higher fiber dosage and fiber length. Rheological evaluations showed an enhanced complex shear modulus for RFMB, suggesting improved performance at higher temperatures but increased stiffness at lower temperatures, with the latter indicating reduced flexibility. RFMB also demonstrated superior fatigue and rutting resistance, albeit with compromised stress sensitivity. Tensile tests on RFMB mortar highlighted significant improvements, especially with longer fibers, while shorter 0.4 mm fibers showed modest reinforcement effects, possibly due to uneven distribution during sample preparation.
Open AccessInfluence of Reed Fiber Length and Dosage on the Properties of Reed-Fiber-Modified Bitumen and Bituminous Mortar
In order to explore the feasibility and efficacy of reed-fiber-modified bitumen (RFMB), three lengths and three dosages of reed fibers were selected to modify bitumen and bituminous mortar, while the physicochemical properties of RFMB and RFMB mortar were analyzed. In this work, FTIR spectroscopy was employed to characterize the chemical impact of fiber on bitumen. The viscidity and rheology of RFMB and the tensile strength of RFMB mortar were evaluated using a Brookfield viscometer, dynamic shear rheometer, and monotonic tensile test. The results showed that adding fibers primarily affects the physical structure rather than the chemical composition of bitumen, confirmed by FTIR spectroscopy. RFMB viscosity increased with higher fiber dosage and fiber length. Rheological evaluations showed an enhanced complex shear modulus for RFMB, suggesting improved performance at higher temperatures but increased stiffness at lower temperatures, with the latter indicating reduced flexibility. RFMB also demonstrated superior fatigue and rutting resistance, albeit with compromised stress sensitivity. Tensile tests on RFMB mortar highlighted significant improvements, especially with longer fibers, while shorter 0.4 mm fibers showed modest reinforcement effects, possibly due to uneven distribution during sample preparation.
- Open Access
- 19 July 2024
- Published by Elsevier in Software Impacts
- Vol. 21
AA2UA: Converting all-atom models into their united atom coarse grained counterparts for use in LAMMPS
- 19 July 2024
- Published by Elsevier in Software Impacts
- Vol. 21
Open AccessAA2UA: Converting all-atom models into their united atom coarse grained counterparts for use in LAMMPS
- Open Access
- 11 March 2024
- Published by Elsevier in Materials & Design
- Vol. 240
Introducing a force-matched united atom force field to explore larger spatiotemporal domains in molecular dynamics simulations of bitumen
- 11 March 2024
- Published by Elsevier in Materials & Design
- Vol. 240
Open AccessIntroducing a force-matched united atom force field to explore larger spatiotemporal domains in molecular dynamics simulations of bitumen
- Open Access
Experimental Testing and Constitutive Modelling of Pavement Materials
Pavement materials such as asphalt mixtures, granular aggregates and soils exhibit complex material properties and engineering performance under external loading and environmental conditions
Open AccessExperimental Testing and Constitutive Modelling of Pavement Materials
Pavement materials such as asphalt mixtures, granular aggregates and soils exhibit complex material properties and engineering performance under external loading and environmental conditions
- Open Access
Effects of Bitumen Thickness on the Aging Behavior of High-Content Polymer-Modified Asphalt Mixture
The film thickness of asphalt mixtures is critical for determining their performance and aging durability. However, understanding of the appropriate film thickness and its influence on performance and aging behavior for high-content polymer-modified asphalt (HCPMA) mixtures is still limited. This research aims to examine the relationship between film thickness, performance, and aging behavior of HCPMA mixtures in order to establish an optimal film thickness that ensures satisfactory performance and aging durability. HCPMA specimens with film thicknesses ranging from 6.9 μm to 17 μm were prepared using a 7.5% SBS-content-modified bitumen. Various tests, including Cantabro, SCB, SCB fatigue, and Hamburg wheel-tracking tests, were conducted to evaluate raveling, cracking, fatigue, and rutting resistance before and after aging. The key findings indicate that insufficient film thickness negatively affects aggregate bonding and performance, while excessive thickness reduces mixture stiffness and resistance to cracking and fatigue. A parabolic relationship between the aging index and film thickness was observed, suggesting that increasing film thickness improves aging durability up to a point, beyond which excessive thickness adversely impacts aging durability. The optimal film thickness for HCPMA mixtures, considering performance before and after aging and aging durability, falls within the 12.9 to 14.9 µm range. This range ensures the best balance between performance and aging durability, offering valuable insights for the pavement industry in designing and utilizing HCPMA mixtures.
Open AccessEffects of Bitumen Thickness on the Aging Behavior of High-Content Polymer-Modified Asphalt Mixture
The film thickness of asphalt mixtures is critical for determining their performance and aging durability. However, understanding of the appropriate film thickness and its influence on performance and aging behavior for high-content polymer-modified asphalt (HCPMA) mixtures is still limited. This research aims to examine the relationship between film thickness, performance, and aging behavior of HCPMA mixtures in order to establish an optimal film thickness that ensures satisfactory performance and aging durability. HCPMA specimens with film thicknesses ranging from 6.9 μm to 17 μm were prepared using a 7.5% SBS-content-modified bitumen. Various tests, including Cantabro, SCB, SCB fatigue, and Hamburg wheel-tracking tests, were conducted to evaluate raveling, cracking, fatigue, and rutting resistance before and after aging. The key findings indicate that insufficient film thickness negatively affects aggregate bonding and performance, while excessive thickness reduces mixture stiffness and resistance to cracking and fatigue. A parabolic relationship between the aging index and film thickness was observed, suggesting that increasing film thickness improves aging durability up to a point, beyond which excessive thickness adversely impacts aging durability. The optimal film thickness for HCPMA mixtures, considering performance before and after aging and aging durability, falls within the 12.9 to 14.9 µm range. This range ensures the best balance between performance and aging durability, offering valuable insights for the pavement industry in designing and utilizing HCPMA mixtures.
- Open Access
Surface Modification of Steel Slag Aggregate for Engineering Application in Asphalt Mixture
The proper disposal of steel slag has always been a great challenge for the metallurgical industry in China and around the world. In this work, the steel slag aggregate (SSA) was surface pretreated (PSSA) and applied into asphalt mixture. The adhesive behavior between the bitumen and five different types of aggregates (i.e., limestone, diorite, diabase, SSA, PSSA) were evaluated based on the contact angle and binder bond strength tests. The pavement performance of three asphalt mixtures which contain normal aggregate, SSA and PSSA respectively, was analyzed by Marshall stability test, wheel-tracking rutting test, low-temperature bending creep test and water sensitivity test. The results showed that surface modification can improve the surface properties of SSA, reduce its contact angle with bitumen, and eventually lead to the improvement of adhesion between them. In addition to the satisfied low-temperature properties, PSSA was found to significantly improve the anti-rutting property and reduce the water sensitivity of asphalt mixture. This work is expected to promote an alternative application for recycling of SSA in pavement engineering.
Open AccessSurface Modification of Steel Slag Aggregate for Engineering Application in Asphalt Mixture
The proper disposal of steel slag has always been a great challenge for the metallurgical industry in China and around the world. In this work, the steel slag aggregate (SSA) was surface pretreated (PSSA) and applied into asphalt mixture. The adhesive behavior between the bitumen and five different types of aggregates (i.e., limestone, diorite, diabase, SSA, PSSA) were evaluated based on the contact angle and binder bond strength tests. The pavement performance of three asphalt mixtures which contain normal aggregate, SSA and PSSA respectively, was analyzed by Marshall stability test, wheel-tracking rutting test, low-temperature bending creep test and water sensitivity test. The results showed that surface modification can improve the surface properties of SSA, reduce its contact angle with bitumen, and eventually lead to the improvement of adhesion between them. In addition to the satisfied low-temperature properties, PSSA was found to significantly improve the anti-rutting property and reduce the water sensitivity of asphalt mixture. This work is expected to promote an alternative application for recycling of SSA in pavement engineering.
- 19 September 2022
- Published by Morressier GmbH
Microstructure Analysis on the Rejuvenated SBS Modified Bitumen with ESEM
Observing the microstructure of bituminous binders with an environmental scanning electron microscope (ESEM) can contribute significantly to reve |
- 19 September 2022
- Published by Morressier GmbH
Microstructure Analysis on the Rejuvenated SBS Modified Bitumen with ESEM
Observing the microstructure of bituminous binders with an environmental scanning electron microscope (ESEM) can contribute significantly to reve |
- Open Access
A Comprehensive Study on the Rejuvenation Efficiency of Compound Rejuvenators for the Characterization of the Bituminous Binder, Mortar, and Mixture
This study aims to comprehensively investigate the rejuvenation efficiency of various self-developed compound rejuvenators on the physical, mechanical, and aging properties of aged bitumen, asphalt mortar, and mixture. The results revealed that the restoration capacity of vacuum distilled-oil rejuvenators on high-and-low temperature performance-grade of aged bitumen is more significant. In contrast, an aromatic-oil based rejuvenator is good at enhancing low-temperature grade and aging resistance. Moreover, the temperature and time of the curing conditions for mixing recycling of asphalt mixture were optimized as 150 °C and 120 min. Furthermore, the sufficient anti-rutting, structural stability, and moisture resistance of recycled asphalt mixture affirmed the rejuvenation efficiency of compound rejuvenators.
Open AccessA Comprehensive Study on the Rejuvenation Efficiency of Compound Rejuvenators for the Characterization of the Bituminous Binder, Mortar, and Mixture
This study aims to comprehensively investigate the rejuvenation efficiency of various self-developed compound rejuvenators on the physical, mechanical, and aging properties of aged bitumen, asphalt mortar, and mixture. The results revealed that the restoration capacity of vacuum distilled-oil rejuvenators on high-and-low temperature performance-grade of aged bitumen is more significant. In contrast, an aromatic-oil based rejuvenator is good at enhancing low-temperature grade and aging resistance. Moreover, the temperature and time of the curing conditions for mixing recycling of asphalt mixture were optimized as 150 °C and 120 min. Furthermore, the sufficient anti-rutting, structural stability, and moisture resistance of recycled asphalt mixture affirmed the rejuvenation efficiency of compound rejuvenators.