Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Atiye Hulya Obdan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Induction Coil Design Considerations for High-Frequency Domestic Cooktops

    by Ahmet Erken, Atiye Hulya Obdan

    The use of wide band gap (WBG) semiconductor switches in power converters is increasing day by day due to their superior chemical and physical properties, such as electrical field strength, drift speed, and thermal conductivity. These new-generation power switches offer advantages over traditional induction cooker systems, such as fast and environmentally friendly heating. The size of passive components can be reduced, and the decreasing inductance value of induction coils and capacitors with low ESR (equivalent series resistance) values contributes to total efficiency. Other design parameters, such as passive components with lower values, heatsinks with low volumes, cooling fans with low power, and induction coils with fewer turns, can offset the cost of WBG power devices. High-frequency operation can also be effective in heating non-ferromagnetic materials like aluminum and copper, making them suitable for heating these types of pans without complex induction coil and power converter designs. However, the use of these new generation power switches necessitates a re-examination of induction coil design. High switching frequency leads to a high resonance frequency in the power converter, which requires lower-value passive components compared to conventional cookers. The most important component is the induction coil, which requires fewer turns and magnetic cores. This study examines the induction heating equivalent circuit, discusses the general structure and design parameters of the induction coil, and performs FEM (finite element method) analyses using Ansys Maxwell. The results show that the induction coil inductance value in new-generation cookers decreases by 80% compared to traditional cookers, and the number of windings and magnetic cores decreases by 50%. These analyses, performed for high-power applications, are also performed for low-power applications. While the inductance value of the induction coil is 90 μH at low frequencies, it is reduced to the range of 5 μH to 20 μH at high frequencies. The number of windings is reduced by half or a quarter. The new-generation cooker system experimentally verifies the coil design based on the parameters derived from the analysis.


  • A New Absolute Encoder Design Based on Piecewise Pseudo-Linear Signals

    by Emre Celik, Atiye Hulya Obdan

    In this article, a new absolute encoder design based on a microcontroller (μC), which is cheap and simple to manufacture and produces high-precision linear output, is presented. Our demodulation algorithm is based on the linearization of highly linear regions around the midpoints of sinusoidal signals generated by sensors. In this study, we manufactured the encoder disk ourselves, and by adjusting the sensor parameters optimally, we successfully obtained more linear signals compared to the signals produced by conventional sine-cosine encoders. The obtained pseudo-linear sections are made more linear through third-order polynomial regression. Additionally, with the help of an extra track on the disk and two sensors, segment-specific linearization has been applied to pseudo-linear segments that are not exactly the same one-to-one. This approach ensures the high accuracy of the encoder, unlike studies that apply the same correction to each sinusoid generated. In addition, the system has gained the absolute encoder function, with a simpler disk structure that is easier to manufacture than the code disks of traditional absolute encoders. The performance of the proposed encoder is verified with an optical encoder arrangement of 2x10 5 pulses per revolution, and an error of 0.00203° per revolution is obtained.


  • Open Access

    Design Methodology of Series Resonant Half Bridge Inverter for Induction Cooker

    by Fatih Zungor, Haci Bodur, Metin Ozturk, Hulya Obdan

    Induction heating is a commonly used method of heating in household appliances due to its efficiency and high reliability reasons. In induction cookers, resonant inverter circuits are frequently chosen due to their high efficiency and the ability to facilitate soft switching. Among the resonant inverters used in induction cookers, half-bridge series resonant (HBSR) inverter topology is often preferred for applications where a balance between cost and power is required. Despite the numerous circuit designs proposed to enhance the performance of HBSR converters, a standardized design methodology suitable for circuit design dedicated to induction cookers has not yet been established. In this study, a new HBSR inverter design methodology supported by various theoretical equations is proposed for use in household induction cooktops. In the proposed design, the first step involves calculating the equivalent resistance value of the coil. Subsequently, a coil capable of achieving to match this resistance value is designed mechanically. Finally, the capacitance value for the resonance circuit is calculated. Calculating the equivalent resistance value before designing the coil, in particular, enables the practical implementation of a viable coil design. To validate the proposed design methodology, it is necessary to control the power transferred to the resonant circuit. For this purpose, closed-loop power control is achieved using the peak value of coil current through frequency modulation technique. Additionally, it needs to be also proved that the implementation circuit works with soft switching between maximum and minimum switch cut-off current. To assess the compliance of the proposed design method with standards, thermal measurements were taken from semiconductors, EMC measurements were conducted to verify compliance with the IEC 55014-1 standard, and finally, the power transferred to the resonant circuit was calculated using oscilloscope measurements. Using the proposed design method, calculations were performed for a 20cm diameter iron pot with a 2300VA power transfer at 230VAC mains voltage. Subsequently, these calculations were verified using various simulation tools, and finally, a prototype implementation circuit was realized to demonstrate the reliability of the proposed design method.


  • Open Access

    Examining the Optimal Use of WBG Devices in Induction Cookers

    by Ahmet Erken, Atiye Hulya Obdan

    Modern induction cookers have started to demand challenging features such as slim design, high power ratings, high performance, and silence. All those requirements are directly related to the power semiconductors used in power converters. Si (silicon)-based power semiconductors are not capable of answering those demands because of strict operating conditions, such as high ambient temperatures. Therefore, WBG (Wide Band Gap) power semiconductors have been getting attention. In this study, WBG power semiconductors will be compared with Si-based IGBT (Insulated Gate Bipolar Transistor) under different operating conditions. The best option to use WBG power semiconductors in modern induction cookers will be analyzed. The performance of a series-resonant half-bridge converter was evaluated under various operating conditions. Measurements were obtained from the real operating conditions of induction hobs. The switching frequency is changed from 20 kHz to 100 kHz, while the power rating is increased to 3.7 kW. In addition to traditional 4-zone induction cooktops, this discussion also provides a comprehensive analysis of high-segment, fully flexible induction cooktops. While the IGBT-based design exhibits 25.79 W power loss per device, the WBG device exhibits 6.87 W in the maximum power condition of conventional induction cooker operation. When it comes to high-frequency operation, the WBG power device exhibits 10.05 W at 95 kHz. Total power loss is still well below that of the IGBT-based conventional design. Appropriate usage of WBG power semiconductors in modern induction cookers can exploit many more benefits than Si-based designs.


  • Open Access

    Analysis and Design of a Flyback Converter for Universal Input and Wide Load Ranges

    by Ferudun Gökçegöz, Erdem Akboy, A. Hülya Obdan

    Flyback converters exhibit the advantages of simple structure, low cost, small volume, isolation, and control simplicity. However, flyback converters demonstrate disadvantages like leakage inductance; hence, losses are incurred. Losses pertain to the requirement of an external cooling system and external costs. It also results in low efficiency and the use of flyback converters in low-power applications. The discontinuous conduction mode (DCM) is used for low-power applications to achieve efficiency. In flyback converters, the reverse recovery losses of the diode are eliminated with DCM. There are many applications of flyback converters in industrial systems, such as led drivers, battery charge systems, telecommunication systems. In this study, analysis and design of a flyback converter for universal input and wide load ranges was performed. The detailed theoretical analysis was conducted and verified with the implementation of a DCM flyback converter for 85 V-265 V RMS AC input voltage, 12 Vo output, 100 kHz switching frequency, and 48 W output power. The overall efficiency of the proposed converter at full load was measured as 81%. Additionally, external cooling systems were not required, which highlighted the development of a compact design with small volume and ease of application for an industrial system that requires the inclusion of more serial flyback converters. Cite this article as: F. Gökçegöz, E. Akboy, A. H. Obdan, “Analysis and Design of a Flyback Converter for Universal Input and Wide Load Ranges”, Electrica, vol. 21, no. 2, pp. 235-241, May, 2021.


  • Open Access

    Application of a Simplified PLL Algorithm for Unbalanced Three Phase Systems by Using Low Cost Microcontrollers

    by Mustafa Cem Ozkilic, Atiye Hulya Obdan

    In literature, there are many Phased Locked Loop (PLL) methods achieving grid matching successfully under unbalanced grid conditions. However, these methods require high computational resources. In this article, a simplified PLL...

  • ÇRE-FKÇ Yönteminin Sabit Noktalı İşaret İşleyicilerle Giriş Gerilimi Dengesizliği Olan Sistemlerde Kullanımı için Adaptasyonu

    by Mustafa Cem Özkılıç, Atiye Hülya Obdan

    Elektrik enerjisi elde etmek için nükleer ve fosil türü yakıtların kullanımının doğaya verdiği zararlar göz önüne alınarak, son yıllarda yenilenebilir enerji kaynaklarının kullanımı tercih edilmeye başlanmış ve çalışmalar hız kazanmıştır. Şebeke bağlantılı çevirici kullanılan yenilenebilir enerji sistemlerinde temel gerilimin frekans ve genliğinin hızlı bir şekilde takip edilmesi ve bağlantı yapılacak sistemin, şebeke hattında yaşanacak bozukluklara rağmen, şebekeye adaptasyonunun gerçekleştirilmesi gerekmektedir. Bu tip adaptasyon için kapalı çevrim algılama yöntemleri kullanılarak değişken frekans ve genlik bilgisi elde edilir. Elde edilen bu bilgi ile sistemin güç faktörü, şebekeye aktarılan aktif veya reaktif güç kontrolü sağlanabilir. En sık kullanılan frekans adaptasyon yöntemi, faz kilitlemeli çevrim (FKÇ) yöntemidir. Bu çalışmada senkron referans eksen (SRE) ile çoklu referans eksen (ÇRE) faz kilitlemeli çevrim (FKÇ) yöntemleri incelenmiş ve SRE-FKÇ ile ÇRE-FKÇ’nin sabit noktalı işaret işleyiciler/mikrokontrolörler ile kullanımına yönelik Matlab- Simulink benzetim karşılaştırmaları yapılmıştır.

  • Open Access

    Güç Kaynakları İçin Yüksek Verimli Güç Faktörü Düzeltme Devresi Tasarımı

    by Atiye Hülya Obdan, Ali Osman Çınar

    Anahtarlamalı güç kaynakları için güç faktörü düzeltme devreleri tasarlamak enerjinin verimli kullanılabilmesi açısından son yıllarda önemli hale gelmiştir. Güç faktörü düzeltme (GFD) teknikleri, yüksek güç yoğunluğu ve enerji verimliliği açısından çok önemli bir rol oynamaktadır. Bu amaçla temel yükseltici GFD devrelerinin yanında, köprüsüz GFD topolojileri ve kontrol stratejileri geliştirilmiştir. Köprüsüz yapılar kullanılarak, devredeki kayıplar azaltılarak güç yoğunluğu arttırılabilir. Bu makalede, köprüsüz GFD yapıları incelenerek, kayıplar ve güç faktörü açısından performansları karşılaştırılmıştır. Yüksek güç seviyelerinde yaygın bir şekilde kullanılan yarı köprü çift yükseltici yapılı GFD devresi analiz edilmiş ve akım modlu kontrol yöntemi uygulanarak tasarlanan devrenin benzetimi PSIM programında yapılmıştır. 900 W' lık yarı köprü çift yükseltici yapılı GFD devresinin bir prototipi gerçekleştirilmiş ve devreden elde edilen sonuçlar sunulmuştur.


  • Open Access

    Renovating the excitation circuit of a conventional welding converter

    by Gulderen Yildirmaz, M. Hadi Sarul, Remzi Gulgun, Hulya Obdan

  • A New Parallel Resonant DC Link for Soft Switching Inverters

    by Hulya Obdan, Haci Bodur, Ismail Aksoy, Nur Bekiroglu, Gulderen Yildirmaz

    In this article, a new parallel resonant DC link (PRDCL) that provides soft switching (SS) and pulse width modulated (PWM) operation for inverters is presented. The new PRDCL ensures zero crossings for a time period, and at any time required for SS and PWM operation of the inverters, respectively. Moreover, the proposed PRDCL is realized by using only one auxiliary active switch, has a simple structure and ease of control, and operates under SS conditions. All switches in the soft switching inverters (SSI) equipped with the new PRDCL operate with soft switching, and are subjected to no additional voltage and current stresses. A detailed steady-state analysis of the proposed PRDCL is presented, and this theoretical analysis is verified by a prototype of a 250 V, 50 kHz and 1250 W circuit.