Mani Mina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mani Mina has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Robert J. Weber
Iowa State Univ, Dept Elect & Comp Engn, Ames, IA 50011 USA
3 shared publications - Halil Ceylan
Iowa State University
2 shared publications - Hesham Abdualla
Iowa State Univ
2 shared publications - Kasthurirangan Gopalakrishnan
Research Associate Professor, Iowa State Univ
2 shared publications - Kristen Cetin
Department of Civil and Environmental Engineering, Michigan State University, East lansing, USA
2 shared publications - Peter Taylor
Department of Civil, Construction & Environmental Engineering, Iowa State University, Ames, IA 50011, USA
2 shared publications
Latest Publications
- Open Access
- 1 May 2020
- Published by Cambridge University Press (CUP) in Proceedings of the Design Society: DESIGN Conference
- Vol. 1, 1775-1784
PROMOTING GRADUATE AND PROFESSIONAL ATTRIBUTES BY COORDINATING KOLBIAN REFLECTIONS FOR INDUSTRIAL DESIGN AND ENGINEERING STUDENTS
This work features challenges of using integrated reflections in undergraduate Industrial Design and Engineering. Reflection activities can be challenging for the students and hard to implement in design and engineering classes. This report has two goals. The first is to introduce a process for more successful engagement for the students in problem solving and design. The second is to show that the process has validity and usefulness for Industrial Design students who are in a College of Design.
- 1 May 2020
- Published by Cambridge University Press (CUP) in Proceedings of the Design Society: DESIGN Conference
- Vol. 1, 1775-1784
Open AccessPROMOTING GRADUATE AND PROFESSIONAL ATTRIBUTES BY COORDINATING KOLBIAN REFLECTIONS FOR INDUSTRIAL DESIGN AND ENGINEERING STUDENTS
This work features challenges of using integrated reflections in undergraduate Industrial Design and Engineering. Reflection activities can be challenging for the students and hard to implement in design and engineering classes. This report has two goals. The first is to introduce a process for more successful engagement for the students in problem solving and design. The second is to show that the process has validity and usefulness for Industrial Design students who are in a College of Design.
- 29 March 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 551-561
Construction Techniques for Electrically Conductive Heated Pavement Systems
Ice and snow accumulation on airport paved surfaces has the potential to cause fatal accidents and monetary loss due to flight delays and cancellations. Traditional de-icing methods involving the application of chemicals or salt and employing large machines can create negative environmental and structural impact on airport infrastructure systems. These methods are also considered to be labor intensive and a safety hazard, especially in congested areas such as aprons. Heated pavement systems using electrically conductive concrete (ECON) have been proposed as a promising alternative technology for preventing ice accumulation and mitigating the adverse effects of using traditional snow removal methods. The objective of this study is to present information and experience about the design, construction procedures, and performance of heated pavement systems using jointed plain concrete pavements for the construction of large-scale heated airport pavements. It is based on detailed field demonstration of the electrically conductive concrete (ECON) heated pavement system (HPS) at the north general aviation (GA) apron of the Des Moines International Airport (DSM) in Iowa, in collaboration with contractors, and airport staff representatives. The expected outcome of this study will help the construction industry to better understand optimal ECON construction methods.
- 29 March 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 551-561
Construction Techniques for Electrically Conductive Heated Pavement Systems
Ice and snow accumulation on airport paved surfaces has the potential to cause fatal accidents and monetary loss due to flight delays and cancellations. Traditional de-icing methods involving the application of chemicals or salt and employing large machines can create negative environmental and structural impact on airport infrastructure systems. These methods are also considered to be labor intensive and a safety hazard, especially in congested areas such as aprons. Heated pavement systems using electrically conductive concrete (ECON) have been proposed as a promising alternative technology for preventing ice accumulation and mitigating the adverse effects of using traditional snow removal methods. The objective of this study is to present information and experience about the design, construction procedures, and performance of heated pavement systems using jointed plain concrete pavements for the construction of large-scale heated airport pavements. It is based on detailed field demonstration of the electrically conductive concrete (ECON) heated pavement system (HPS) at the north general aviation (GA) apron of the Des Moines International Airport (DSM) in Iowa, in collaboration with contractors, and airport staff representatives. The expected outcome of this study will help the construction industry to better understand optimal ECON construction methods.
- 24 August 2017
- Published by American Society of Civil Engineers (ASCE)
- p. 1-9
Configuration of Electrodes for Electrically Conductive Concrete Heated Pavement Systems
This study investigates the effects of the type and configuration of embedded electrodes on resistive heating performance of an electrically conductive concrete (ECON) heated-pavement system (HPS). Three ECON slabs—an ECON slab with perforated galvanized steel angle electrodes, an ECON slab with steel rebar electrodes, and an ECON slab with perforated galvanized steel angle electrodes with an isolation layer—were designed and constructed. The resistive heating performance of the slabs was evaluated by measuring the electric current and ECON slab surface temperature at specific points during the application of voltage. The results revealed that the performance of the ECON slab with perforated galvanized steel angle electrodes was marginally changed when an isolation layer was used, so with respect to construction practice and cost considerations, an isolation layer is not deemed to be necessary for constructing large-scale ECON heated pavements. Electrical current measurements can be used for evaluating the conductivity and the heating capability of the ECON slabs.
- 24 August 2017
- Published by American Society of Civil Engineers (ASCE)
- p. 1-9
Configuration of Electrodes for Electrically Conductive Concrete Heated Pavement Systems
This study investigates the effects of the type and configuration of embedded electrodes on resistive heating performance of an electrically conductive concrete (ECON) heated-pavement system (HPS). Three ECON slabs—an ECON slab with perforated galvanized steel angle electrodes, an ECON slab with steel rebar electrodes, and an ECON slab with perforated galvanized steel angle electrodes with an isolation layer—were designed and constructed. The resistive heating performance of the slabs was evaluated by measuring the electric current and ECON slab surface temperature at specific points during the application of voltage. The results revealed that the performance of the ECON slab with perforated galvanized steel angle electrodes was marginally changed when an isolation layer was used, so with respect to construction practice and cost considerations, an isolation layer is not deemed to be necessary for constructing large-scale ECON heated pavements. Electrical current measurements can be used for evaluating the conductivity and the heating capability of the ECON slabs.
- 15 July 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 49 (7) , 4242-4244
Magnetic Field Generator Design for Magneto-Optic Switching Applications
In optical communications, magneto-optic switching technologies are emerging alternatives, as well as complimentary solutions to their electro-optic counterpart. Their main attractions include low-power and low-cost solutions for signal routing used in fiber-based and all-optical circuits needed in fast dynamic communications systems. However, design of the magnetic field generator system required for these devices is a challenge that has limited their performance and integration onto silicon-based technologies. In this work, a novel approach to designing magnetic field generators for magneto-optic switching systems is provided. This practical field generation design method for magneto-optical interferometers highlights important trade-offs specific to different needs and applications. Example usage of this design process is provided in the application of a magneto-optic switch of ring resonator configuration. Optical and electrical results are also provided and discussed.
- 15 July 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 49 (7) , 4242-4244
Magnetic Field Generator Design for Magneto-Optic Switching Applications
In optical communications, magneto-optic switching technologies are emerging alternatives, as well as complimentary solutions to their electro-optic counterpart. Their main attractions include low-power and low-cost solutions for signal routing used in fiber-based and all-optical circuits needed in fast dynamic communications systems. However, design of the magnetic field generator system required for these devices is a challenge that has limited their performance and integration onto silicon-based technologies. In this work, a novel approach to designing magnetic field generators for magneto-optic switching systems is provided. This practical field generation design method for magneto-optical interferometers highlights important trade-offs specific to different needs and applications. Example usage of this design process is provided in the application of a magneto-optic switch of ring resonator configuration. Optical and electrical results are also provided and discussed.
- 1 April 2011
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 109 (7) , 07E334
Improved formulation for Faraday rotation characterization
The analysis of complex structures consisting of fibers, films, birefringent, and magnetic materials is greatly aided by the availability of an analysis structure. Jones calculus is typically utilized in the course of such analyses. However, standard Jones calculus does not account for the effect of reflections. An improved formulation for the characterization of Faraday rotation that alleviates this shortcoming is reported here and is integral for the proper analysis of devices employing magneto-optic effects.
- 1 April 2011
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 109 (7) , 07E334
Improved formulation for Faraday rotation characterization
The analysis of complex structures consisting of fibers, films, birefringent, and magnetic materials is greatly aided by the availability of an analysis structure. Jones calculus is typically utilized in the course of such analyses. However, standard Jones calculus does not account for the effect of reflections. An improved formulation for the characterization of Faraday rotation that alleviates this shortcoming is reported here and is integral for the proper analysis of devices employing magneto-optic effects.
- 21 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 43 (6) , 2680-2682
Mach–Zehnder Interferometric Switch Utilizing Faraday Rotation
An all-fiber interferometric switch based on Faraday rotation exhibited by magneto-optic materials in the presence of an external magnetic field is reported. The interferometer is Mach-Zehnder type and the related phase shift was obtained by the rotation of the state of polarization of a linearly polarized optical signal. The operation of the switch is demonstrated experimentally. The effect of the optical beam size on the achievable Faraday rotation is also investigated. Hysteresis is avoided as the magnetic field required for switching is much lower than the saturation field
- 21 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 43 (6) , 2680-2682
Mach–Zehnder Interferometric Switch Utilizing Faraday Rotation
An all-fiber interferometric switch based on Faraday rotation exhibited by magneto-optic materials in the presence of an external magnetic field is reported. The interferometer is Mach-Zehnder type and the related phase shift was obtained by the rotation of the state of polarization of a linearly polarized optical signal. The operation of the switch is demonstrated experimentally. The effect of the optical beam size on the achievable Faraday rotation is also investigated. Hysteresis is avoided as the magnetic field required for switching is much lower than the saturation field
- 21 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 43 (6) , 2698-2700
Magnetically Controlled Switches for Optoelectronics Networking: The Problem, Available Technology, New Implementations
This paper introduces some physical layer requirements of electro-optical as well as all optical networking. Due to the huge volume of data that is transmitted on these networks, there is a need for high-speed switching with effective switching in the nanosecond regime or better. While such switches exist for electronic media, they have been challenging for optical applications. Taking the recent developments in magneto-optical switches into consideration, there is a pressing need for fast switching of highly inductive loads. The state-of-the-art as well as the trends and needs for high speed switching in optical networks are presented. Some of the newest developments in the small-scale high-speed switching for electro-optical and all optical light path applications will also be presented. Experimental results of the newly developed switches at our program are presented and discussed. Based on the results, system requirements are identified and some shortcomings of the initial system are addressed. Possible improvements to the overall light-trail system are proposed and discussed
- 21 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 43 (6) , 2698-2700
Magnetically Controlled Switches for Optoelectronics Networking: The Problem, Available Technology, New Implementations
This paper introduces some physical layer requirements of electro-optical as well as all optical networking. Due to the huge volume of data that is transmitted on these networks, there is a need for high-speed switching with effective switching in the nanosecond regime or better. While such switches exist for electronic media, they have been challenging for optical applications. Taking the recent developments in magneto-optical switches into consideration, there is a pressing need for fast switching of highly inductive loads. The state-of-the-art as well as the trends and needs for high speed switching in optical networks are presented. Some of the newest developments in the small-scale high-speed switching for electro-optical and all optical light path applications will also be presented. Experimental results of the newly developed switches at our program are presented and discussed. Based on the results, system requirements are identified and some shortcomings of the initial system are addressed. Possible improvements to the overall light-trail system are proposed and discussed
- 1 October 2006
- Published by Taylor & Francis in European Journal of Engineering Education
- Vol. 31 (5) , 509-516
The pedantic 21st century freshman engineering student
This paper reviews many of the observed characteristics and study habits of first-year students in Iowa State University's electrical engineering programme (Ames, Iowa, USA). The studying and problem-solving practices of the students are discussed to identify salient traits, strengths and weaknesses, and critical symptoms thereof, which can affect learning in technical fields, as well as life-long learning. The effects the Internet and the use of computer games have on student thinking and problem-solving approaches are also discussed.
- 1 October 2006
- Published by Taylor & Francis in European Journal of Engineering Education
- Vol. 31 (5) , 509-516
The pedantic 21st century freshman engineering student
This paper reviews many of the observed characteristics and study habits of first-year students in Iowa State University's electrical engineering programme (Ames, Iowa, USA). The studying and problem-solving practices of the students are discussed to identify salient traits, strengths and weaknesses, and critical symptoms thereof, which can affect learning in technical fields, as well as life-long learning. The effects the Internet and the use of computer games have on student thinking and problem-solving approaches are also discussed.