DMDavid A. Masciola

David A. Masciola

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


David A. Masciola has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Operation of Full-Scale Oily Wastewater Treatment System

    by Ronald L. Vaughan, Brian E. Reed, Michael C. Malak, David A. Masciola, Gary W. Roark

    An aluminum company that produces an oily wastewater upgraded their wastewater treatment facilities to prevent ground and surface water contamination. Applying pilot-scale data collected over a 2.5 year period, the following treatment train was proposed: gravity separation → tubular ultrafiltration (TUF) → unlined hybrid wetlands. TUF residual was to be concentrated using a high-shear rotary ultrafiltration (HSRUF) system. Full-scale operation differed from what was initially proposed due to several phenomena unforeseen in the pilot-study/design phase. TUF permeate produced during full-scale operation was of much higher quality than that observed during the pilot-scale study (<10 mg/L compared with 66 mg/L O/G). Therefore, the hybrid wetlands were not constructed. A significant amount of free-oil formed in the TUF feed tanks (average: 1,420 L/day), resulting in the oil concentration of the TUF feed streams remaining at <20%, greatly prolonging run lengths and reducing the volume of TUF residual that required treatment. Thus, the HSRUF system was not required to concentrate the residual. The following modified full-scale treatment train is currently operating: gravity separation → TUF → lined permeate holding pond → direct discharge to receiving water.


  • Effects of Operating Parameters in Tubular Ultrafiltration

    by David A. Masciola, Roger C. Viadero, Brian E. Reed

    A parametric waste-specific study was conducted to develop a more mechanistic understanding of the tubular ultrafiltration system using a surrogate metalworking (MW) fluid as a model waste stream. An average gel layer concentration of 31% oil was calculated and the gel layer concentration was determined to be independent of transmembrane pressure and cross-flow velocity. The thin-film model adequately described limiting flux data collected in this study, due to the use of discrete cross-flow velocity/MW fluid concentration experiments; thus, an improved mechanistic understanding was achieved. Mass transfer and thus the pressure-independent “limiting” permeate flux were generally comparable to values observed in a high-shear rotary UF system, for oil concentrations <26%. However, a decrease in net permeate flux was observed in the tubular ultrafiltration (UF) system at high feed oil concentrations; thus, a hybrid system (conventional tubular followed by high-shear rotary UF) is proposed for treatment applications where high concentrations are desired.


  • DEVELOPMENT AND OPERATION OF A FULL-SCALE OILY WASTEWATER TREATMENT SYSTEM

    by Brian E. Reed, Ronald L. Vaughan, Patrick Carriere, Michael C. Malak, David A. Masciola, Gary W. Roark, Jeff Brooks