Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joong Yeon Lim has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sex determination through metric analysis of teeth crown

    by Hyo-Sang Ahn, Eun Jin Woo, Joong Yeon Lim, Hee-Jin Kim, Kyung-Seok Hu

    Hyo-Sang Ahn, Eun Jin Woo, Joong Yeon Lim, Hee-Jin Kim, Kyung-Seok Hu. Anat Cell Biol -0001;0:. https://doi.org/10.5115/acb.26.180

  • Open Access

    Fabrication of Electrospun PAN–CNT–CNC Composite Nanofiber Films for Hydrovoltaic Energy Harvesting

    by Hee Chang Jeon, Woohyuk Jang, Jiseon Yun, Sein Min, Joong Yeon Lim, Young-Seong Kim

    Water-induced electrical responses were investigated using porous electrospun PAN-based composite membranes containing CNTs and CNCs. Following the injection of 20 μL of a 2 wt% NaCl solution, transient open-circuit voltage responses were observed from the PAN, PAN–CNT, and PAN–CNT–CNC devices, with maximum values of approximately 47, 42, and 68 mV, respectively, in the tested devices. Three successive injection–drying cycles demonstrated repeated transient responses within individual devices but did not establish device-to-device reproducibility or long-term stability. Raman and FTIR analyses supported the incorporation of CNTs and the modification of the water-interacting environment following CNC addition, respectively. The voltage waveform depended on the liquid type, NaCl concentration, and wetting–drying history, including a transient reverse-voltage response during drying. These results provide a proof-of-concept observation of wetting–drying-dependent electrical behavior in electrospun PAN-based porous membranes. Load-dependent power, long-term durability, and device-to-device reproducibility remain to be established.

  • Open Access

    Nanoscale Electromechanical and Conductive Properties of a Layered Two-Dimensional Hybrid Perovskite

    by Hee-Chang Jeon, Woohyuk Jang, Jiseon Yun, Sein Min, Joong Yeon Lim, Young-Seong Kim

    Two-dimensional (2D) organic–inorganic hybrid perovskites exhibit coupled ionic, electronic, and electromechanical responses that can strongly influence local charge transport. Here, solution-processed mixed-halide butylammonium lead perovskite crystals were mechanically exfoliated and investigated using X-ray diffraction, atomic force microscopy, piezoresponse force microscopy (PFM), and conductive atomic force microscopy (c-AFM). PFM measurements under −5, 0, and +5 V revealed clear bias-dependent changes in amplitude and phase, indicating an electric field-sensitive local electromechanical response. Local c-AFM measurements showed nonlinear bipolar hysteresis, with a pronounced increase in current near +7–8 V and a decrease near −7 to −6 V during the subsequent negative sweep. Because the crystals are mixed ionic–electronic conductors and the nanoscale tip–sample junction introduces substantial injection and contact barriers, the observed behavior is interpreted as resistive switching-like conductivity modulation, rather than definitive ferroelectric switching. The results are consistent with the combined contributions of charge injection, trap filling, possible ionic redistribution, and piezoelectricity-associated modulation of the local transport barrier. These findings provide nanoscale insight into electric field-dependent electromechanical and out-of-plane conductive behaviors in layered 2D hybrid perovskites.

  • Alternating Current Photodetectors in Hybrid Perovskites with Modulated Oscillation Frequency

    by Joong Yeon Lim, Seonghwan Kim, Muhammad Toyabur Rahman, Pegah Zandi, Arindam Phani, Hee Chang Jeon, Minwook Park, Young‐Seong Kim

    Growing interest has emerged in the alternating current (AC) photovoltaic effect, distinct from the traditional direct‐current (DC)‐based photovoltaic effect. This effect arises from the relative movement and reorganization of quasi‐Fermi levels at material interfaces when light is toggled on or off. In this study, a halide‐perovskite‐based photodetector is successfully fabricated, demonstrating the AC photovoltaic effect through oscillation frequency modulation and light‐chopping‐induced optical frequency tuning. For the first time, in sample impedance and the AC photovoltaic effect in this system are observed changes. Under specific conditions—light‐chopping frequency of 4 Hz, 0 V bias, 500 mV oscillation voltage, and resonance frequency of 16.8 MHz—a distinctive AC photoresponse at 405 nm wavelength is confirmed. This phenomenon is attributed to the influence of oscillation frequency on charge carriers, impacting electron dynamics such as capture and emission within the energy bands. The developed photodetector exhibits efficient responses to optical frequency and light intensity changes, aligning with the characteristics of conventional AC photodetectors. This work establishes a novel pathway for high‐performance AC photodetectors with superior sensitivity and tunability, surpassing traditional DC devices, and sets the foundation for further advancements in optoelectronic applications.


  • Open Access

    Enhancing Piezoelectricity of Polyacrylonitrile–Cellulose Composite Nanofibers via Zigzag Conformation

    by Joong Yeon Lim, Won Suk Kwak, Minwook Park, Young Seong Kim

    A novel piezoelectric material, polyacrylonitrile (PAN) nanofibers, exhibits significant piezoelectric effects when a high content of planar zigzag structures is present. To enhance the contribution of planar zigzag structures to energy conversion while preserving the structure of PAN nanofibers, a novel approach was developed to increase planar zigzag content by incorporating cellulose nanocrystals (CNCs) rather than modifying conventional synthesis conditions. In this study, CNCs were introduced during the electrospinning process of PAN formation, and the increased planar zigzag content was confirmed through X-ray diffraction (XRD), electrical characterization, and Fourier transform infrared spectroscopy (FTIR) analyses. This study, for the first time, demonstrates that CNC addition to PAN enhances the mechanical properties and piezoelectric performance by promoting the formation of zigzag structures, which play a crucial role in the piezoelectric effect. The PAN–CNC composite holds great potential for applications in new piezoelectric devices. With CNC incorporation, the voltage increased by 68.9%, and the current increased by 80% compared to regular PAN. The generated energy is suitable for human applications and can also power commercial devices, making these findings pivotal for the advancement of piezoelectric materials and devices.


  • Open Access

    Fabrication of Graphene Polyhedra: Unveiling New Structures, Forms, and Properties

    by Joong Yeon Lim, Seonghwan Kim, Muhammad Toyabur Rahman, Young‐Seong Kim

    A hybrid nanoporous carbon alloy material is synthesized using a core–shell structure based on metal–organic frameworks, revealing a novel graphene polyhedral form. The presence of carbon and metal as doped cobalt carbides based on morphed graphene within the graphene polyhedra is confirmed through a combination of X‐ray diffraction, X‐ray photoelectron spectroscopy, transmission electron microscopy, and Raman spectroscopy analyses. These novel graphene polyhedra exhibit magnetoelectric coupling properties at room temperature. The magnetic state control is verified using a magnetic probe; the changes in the magnetic state increased with a higher applied bias, and the poling direction of the magnetic phase is reversed based on the scanning direction of the probe. This discovery holds promise for future applications in ultrafast devices and carbon‐based spintronics research.


  • Open Access

    Leveraging Microneedles for Raised Scar Management

    by Zhengyun Jin, Young-Seong Kim, Joong Yeon Lim

    Disruption of the molecular pathways during physiological wound healing can lead to raised scar formation, characterized by rigid, thick scar tissue with associated symptoms of pain and pruritus. A key mechanical factor in raised scar development is excessive tension at the wound site. Recently, microneedles (MNs) have emerged as promising tools for scar management as they engage with scar tissue and provide them with mechanical off-loading from both internal and external sources. This review explores the mechanisms by which physical intervention of drug-free MNs alleviates mechanical tension on fibroblasts within scar tissue, thereby promoting tissue remodeling and reducing scar severity. Additionally, the role of MNs as an efficient cargo delivery system for the controlled and sustained release of a wide range of therapeutic agents into scar tissue is highlighted. By penetrating scar tissue, MNs facilitate controlled and sustained localized drug administration to modulate inflammation and fibroblastic cell growth. Finally, the remaining challenges and the future perspective of the field have been highlighted.


  • Open Access

    Enhancing Urban Public Safety through UAS Integration: A Comprehensive Hazard Analysis with the STAMP/STPA Framework

    by Eutteum Go, Hee-Chang Jeon, Jong-Sup Lee, Joong-Yeon Lim

    Rapid urbanization in developing countries poses challenges such as rising crime rates and resource scarcity. Unmanned Aircraft Systems (UAS) offer a promising solution to enhance public safety, but their integration requires addressing specific challenges. This study employs the Systems-Theoretic Accident Model and Processes (STAMP) and System-Theoretic Process Analysis (STPA) methodologies to identify potential hazards and requirements for integrating UAS into public safety systems in urban environments. The research objectives include identifying hazards and challenges, developing safety requirements and guidelines, and proposing strategies for efficient infrastructure investment. The proposed framework, based on STAMP/STPA, includes additional steps to consider early-stage systems and maintain stakeholder traceability. A risk matrix approach is utilized to prioritize risk mitigation measures for cost-effectiveness. The findings of this study provide valuable insights for policymakers and urban planners in developing countries seeking to harness the potential of UAS technology for enhancing public safety while addressing the unique challenges posed by rapid urbanization.


  • Open Access

    Multiferroic-field coupling in ultrathin nanofilm halide perovskite at room temperature

    by Young-Seong Kim, Zhengyun Jin, Min Wook Park, Hee Chang Jeon, Joong Yeon Lim