AJAvinash Joshi

Avinash Joshi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Avinash Joshi has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synthesis of PWM Converters From Conversion Ratios Using Flux- or Charge-Balance Equations

    by Ramanuja Panigrahi, Santanu K. Mishra, Avinash Joshi, Khai D. T. Ngo

    To cater to the heterogeneity in emerging applications, researchers have constantly been driven to invent novel dc-dc converter topologies. A review of prior-art in dc-dc converter synthesis methods shows that many converter choices are available for a given input and output specification. This paper quantifies the number of these choices using the Flux Balance Equation (FBE). As the number of state variables that can be used to derive the FBE is limited, it is possible to find out the total number of possible FBEs available for a given voltage conversion ratio. Once the FBEs are known, synthesizing a converter is carried out as an inverse problem. Three different strategies to solve this inverse problem of converter synthesis and some critical synthesis results are summarized in this article. The dual synthesis of current-fed topologies with given current conversion ratios based on the Charge Balance Equation (CBE) is also demonstrated. Four novel topologies were synthesized to illustrate the effectiveness of the CBE-based synthesis method. The mathematical formulation of the CBE-based inverse problem and quantification of complexities in solving it are also reported.


  • Synthesis of DC–DC Converters From Voltage Conversion Ratio and Prescribed Requirements

    by Ramanuja Panigrahi, Santanu K. Mishra, Avinash Joshi, Khai D. T. Ngo

    This article proposes a systematic synthesis method to identify the optimum converter topology for a specified voltage conversion ratio. This gain-oriented converter synthesis is formulated as an inverse problem around the inductor flux balance equations. The proposed synthesis method consists of two processes. A set of distinct converter topologies is first synthesized from the specified voltage conversion ratio by obtaining the solutions for a set of six inverse equations in twelve unknowns. The optimal topology for any intended application can be identified based on the desired performance metrics. The complete synthesis method is illustrated with quadratic buck-boost gain as an example. In total, 25 distinct topologies are synthesized using the first process, and their feasibility is validated by PLECS simulation. In total, three case studies are reported to explain the second process. Ground-referenced output and the minimum number of switches are used as the first two selection criteria in all the case studies. Minimum peak inductor current, minimum component stress factor, and minimum voltage and current stress are the third selection criterion in Case Studies-1, 2, and 3, respectively. The steady-state operations of two optimal converters selected in Case Study-1 were verified experimentally.


  • DC-DC Converter Synthesis: An Inverse Problem

    by Ramanuja Panigrahi, Santanu Kumar Mishra, Avinash Joshi, Khai D. T. Ngo

    The inverse problem for the dc-dc converters refers to synthesizing converter topologies from a specified voltage gain expression. Though the flux balance principle is widely used in the analysis of dc-dc converters, its application as a synthesis tool has not been explored. This paper describes a mathematical approach to synthesize a converter topology from a required voltage gain expression by utilizing the principle of inductor flux balance. At first, the general form of gain expression for second-order converters is derived. From the general form of gain expression, the inverse problem is formulated by identifying the governing equations. The mathematical formulation of the inverse problem and highlighting the challenges involved in solving it are the primary subjects of this paper. To outline these challenges, a probable solution strategy of this inverse problem is presented. In order to derive a converter topology, at first, the appropriate flux balance equations are determined, and then the circuit topology is derived to establish the required flux balance. In contrast to the forward problem, the solution to the inverse problem is neither direct nor unique. Hence, getting the optimum closed-form solution to this inverse problem is an open-ended challenge with many possible approaches.


  • Synthesizing a Family of Converters for a Specified Conversion Ratio Using Flux Balance Principle

    by Ramanuja Panigrahi, Santanu K. Mishra, Avinash Joshi

    Non-isolated DC-DC converters are fundamental building blocks in the power supply for a wide range of applications. To cater to this heterogeneity in applications, development of DC-DC converters with suitable voltage conversion ratio (G) is imperative. Given a converter topology, G can be found out uniquely by using the principle of inductor volt-sec balance, and the process of obtaining the voltage conversion ratio from the topology is simple. In contrast, the inverse problem, i.e., the process of obtaining the converter topology for a given voltage conversion ratio (G) is a challenging task, and the obtained topology is also not unique. This paper presents a simple method to obtain a family of converter topologies from a required voltage conversion ratio. This method utilizes the principle of inductor flux balance as a synthesis tool. The step by step procedure to synthesize the converter topologies is outlined. To illustrate the efficacy of the proposed method, it is applied to synthesize various quadratic buck-boost topologies, and a family of converters is identified. Operation and feasibility of two novel topologies, identified by the proposed theory, are verified experimentally.


  • A Theory to Synthesize Nonisolated DC–DC Converters Using Flux Balance Principle

    by Soumya Shubhra Nag, Ramanuja Panigrahi, Santanu Kumar Mishra, Avinash Joshi, Khai D. T. Ngo, Suman Mandal

    The paper describes a theory to synthesize non-isolated DC-DC converters. It uses the fundamental flux balance equation across the inductors of a converter as a starting point in this synthesis process. The flux balance equations are the linear equations of the input voltage, capacitor voltages and duty cycle (D). The coefficients of these linear equations can be selected from a finite set of choices. These choices define the converter topologies which are subsequently used to synthesize a converter. The synthesis procedure applies to a converter of multiple order. All the possible converters are identified for a first order topology. In the case of second order converters, all the choices of flux balance equation are defined. Based on these choices three new quadratic topologies are derived and verified to demonstrate the effectiveness of the theory. The procedure to synthesize a converter from a given voltage conversion ratio is also outlined.


  • Control Approach to Enhance the Performance of a Current-Fed Switched Inverter

    by Anil Gambhir, Santanu K. Mishra, Avinash Joshi

    Current-fed Switched Inverter (CFSI), a derivative of Z-source inverter (ZSI), has the advantages of lower component count, single stage conversion, high gain, and inherent shoot-through protection. But due to the limitation of modulation index, CFSI is forced to operate at higher DC-link voltage. As a result, voltage stress across the switches and capacitors increases. To mitigate this problem, a new PWM technique is proposed. With the proposed scheme, CFSI can be operated at a lower DC-link voltage by increasing the modulation index. But operating at lower DC-link voltage increases peak-to-peak ripple in the inductor current and leads to condition of early DCM. Therefore, this paper also implemented a Variable Duty Cycle (VDC) scheme, which reduces the peak-to-peak ripple in the input inductor current and increases the CCM operating range of CFSI. The proposed PWM scheme along with VDC scheme is validated for CFSI, which helps to (a) reduce the voltage stress form 280 V to 180 V, (b) reduce the input current ripple from 53.33% to 15.15%, (c) enlarge CCM range from 56% to 82%, and (d) improve the efficiency by 3.5%.


  • Power Frequency Harmonic Reduction and its Redistribution for Improved Filter Design in Current-Fed Switched Inverter

    by Anil Gambhir, Santanu K. Mishra, Avinash Joshi

    Due to pulsating power at the inverter output terminals, the passive storage elements of boost stage of the Current-fed Switched Inverter (CFSI) contains power frequency harmonic component (100 Hz) apart from DC and switching frequency components. In prior designs, the second harmonic component is suppressed by increasing the size of input filter inductor and capacitor or by using additional circuits. This paper presents the complete characterization of a control based approach to suppress power frequency harmonic component in input inductor current of a CFSI. It also presents a comprehensive characterization of the harmonic power redistribution. Using the proposed approach, it is demonstrated that the inductor value of a CFSI is reduced by 61 % for the same peak-to-peak ripple. This leads to improvement in the conversion ratio, efficiency, and power density of the overall converter. A SiC Mosfet based CFSI with 75 kHz switching frequency is used to verify the proposed design philosophy.


  • Operation and Control of a DVR in the Presence of Interharmonics

    by Amit Kumar Jindal, Arindam Ghosh, Avinash Joshi

    The paper discusses the operating principles and control characteristics of a dynamic voltage restorer (DVR). It is assumed that the source voltages contain interharmonic components in addition to fundamental components. The main aim of the DVR is to produce a set of clean balanced sinusoidal voltages across the load terminals irrespective of unbalance, distortion and voltage sag/swell in the supply voltage. An algorithm has been discussed for extracting fundamental phasor sequence components from the samples of three-phase voltages or current waveforms having integer harmonics and interharmonics. The DVR operation based on extracted components is demonstrated. The switching signal is generated using a deadbeat controller. It has been shown that the DVR is able to compensate these interharmonic components such that the load voltages are perfectly regulated. The DVR operation under deep voltage sag is also discussed. The proposed DVR operation is verified through the computer simulation studies using the MATLAB software package.

  • Capacitor Voltage Balancing Schemes in Flying Capacitor Multilevel Inverters

    by Anshuman Shukla, Arindam Ghosh, Avinash Joshi

    This paper focuses on the development of capacitor voltage balancing methods in a flying capacitor multilevel inverter (FCMLI). Three such strategies have been described and have been applied to a five-level CMLI. The sinusoidal pulse width modulation technique has been used while making the proposals. The first scheme works on the principle of selection of the most favorable switching state depending on the preferential charging and discharging of capacitors. It uses a two-level comparator for each capacitor state detection. In the second scheme, capacitor voltages are controlled in a three-level comparator to achieve better performance. In the third scheme, a sampling frequency-based approach for controlling the capacitor voltages has been proposed to achieve further improved performance. The performance of proposed strategies is confirmed through both simulation and experimental investigations.