Santanu Kumar Mishra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Santanu Kumar Mishra has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Rajib Kumar Panigrahi
Department of Electronics and Communication Engineering, Indian Institute of Technology Roorkee, Roorkee, India
10 shared publications - Avinash Joshi
Department of Electrical Engineering, Indian Institute of Technology Kanpur, Kanpur, India
7 shared publications - Khai D. T. Ngo
Bradley Department of Electrical and Computer Engineering, and Center for Power Electronics Systems (CPES), Virginia Tech, Blacksburg, VA, USA
5 shared publications - Mandeep Singh Rana
Electrical Engineering, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, India
4 shared publications - Somenath Banerjee
Indian Institute of Technology Delhi, Delhi, India
4 shared publications - Anil Gambhir
Department of Electrical Engineering, Indian Institute of Technology, Kanpur, India
3 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
- Vol. 7 (4) , 1886-1895
Differential Transformer Based DC/DC Power Topologies for Ultralow Gain Conversion
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
- Vol. 7 (4) , 1886-1895
Differential Transformer Based DC/DC Power Topologies for Ultralow Gain Conversion
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (2) , 2394-2403
An Iterative Current Harmonic Suppression Algorithm for Single-Phase Distorted Grid Applications
The distorted grid voltage in the distribution system induces lower order harmonics in the current sourced from the Single-phase Grid-connected Inverter (SGI). Non-idealities of the SGI also contribute to the current distortion. This paper presents a novel iterative algorithm for the SGI which suppresses current harmonics due to both the grid-side and inverter-side distortions. The mathematical basis of the method is derived in this paper. The iterative algorithm is developed ensuring a computationally light implementation in modern digital microcontrollers. The proposed algorithm is verified in simulation under practical grid conditions like in a Low Voltage Distribution System (LVDS). Further experimental verifications were performed on a 1.1 kW laboratory prototype of an SGI with inverter-side distortion connected to distorted grid. Different lower order harmonics were separately suppressed under predefined thresholds. The measured total harmonic distortion in the current was improved from 22.24 % to 2.73 % at rated power.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (2) , 2394-2403
An Iterative Current Harmonic Suppression Algorithm for Single-Phase Distorted Grid Applications
The distorted grid voltage in the distribution system induces lower order harmonics in the current sourced from the Single-phase Grid-connected Inverter (SGI). Non-idealities of the SGI also contribute to the current distortion. This paper presents a novel iterative algorithm for the SGI which suppresses current harmonics due to both the grid-side and inverter-side distortions. The mathematical basis of the method is derived in this paper. The iterative algorithm is developed ensuring a computationally light implementation in modern digital microcontrollers. The proposed algorithm is verified in simulation under practical grid conditions like in a Low Voltage Distribution System (LVDS). Further experimental verifications were performed on a 1.1 kW laboratory prototype of an SGI with inverter-side distortion connected to distorted grid. Different lower order harmonics were separately suppressed under predefined thresholds. The measured total harmonic distortion in the current was improved from 22.24 % to 2.73 % at rated power.
- 14 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (3) , 4100-4109
Impact of Quadrature Signal Generator Performance on the Power Quality of Single-Phase Grid-Connected Inverter
The grid voltage harmonics in the distribution system induces lower order harmonic currents in the output of Single-phase Grid-connected Inverter (SGI). Non-idealities of the SGI also contribute to the grid current distortion. The distortion in the SGI output current is directly dependent on the output impedance offered by the SGI at harmonic frequencies. The Quadrature Signal Generator (QSG) used for the grid current is an important building block in the SRF-based control scheme of the SGI. In this paper, the performance of the current QSG (iQSG) is linked to the power quality of the SGI and a generalized analytical approach to calculate the equivalent impedance of the SGI at harmonic frequencies is derived. The developed impedance model is used to quantitatively compare four widely used QSG techniques on the basis of power quality and other performance metrics pertaining to an iQSG. The analysis is validated in simulation under distorted grid conditions similar to a Low Voltage Distribution System (LVDS). Further experimental verifications were performed on a 700 W laboratory prototype of a Current-Fed Switched Inverter (CFSI) connected to a 230 V distorted grid. The theoretically calculated and experimentally measured output impedances of the SGI at harmonic frequencies are shown to closely follow each other.
- 14 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (3) , 4100-4109
Impact of Quadrature Signal Generator Performance on the Power Quality of Single-Phase Grid-Connected Inverter
The grid voltage harmonics in the distribution system induces lower order harmonic currents in the output of Single-phase Grid-connected Inverter (SGI). Non-idealities of the SGI also contribute to the grid current distortion. The distortion in the SGI output current is directly dependent on the output impedance offered by the SGI at harmonic frequencies. The Quadrature Signal Generator (QSG) used for the grid current is an important building block in the SRF-based control scheme of the SGI. In this paper, the performance of the current QSG (iQSG) is linked to the power quality of the SGI and a generalized analytical approach to calculate the equivalent impedance of the SGI at harmonic frequencies is derived. The developed impedance model is used to quantitatively compare four widely used QSG techniques on the basis of power quality and other performance metrics pertaining to an iQSG. The analysis is validated in simulation under distorted grid conditions similar to a Low Voltage Distribution System (LVDS). Further experimental verifications were performed on a 700 W laboratory prototype of a Current-Fed Switched Inverter (CFSI) connected to a 230 V distorted grid. The theoretically calculated and experimentally measured output impedances of the SGI at harmonic frequencies are shown to closely follow each other.
- 3 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (1) , 190-202
An Integrated Active Clamp-Based Asymmetric Half-Bridge Topology for High-Voltage High-Buck Intermediate Bus Converters
This paper presents a novel integrated active-clamped topology optimized for high-voltage, high step-down Intermediate Bus Converter (IBC) applications. A comprehensive analysis of the converter’s operating modes and performance characterization is provided. The topology incorporates an integrated clamp technique that effectively reduces secondary switch peak voltage stress. Enhanced Zero Voltage Switching (ZVS) performance is achieved through increased total inductive energy. Furthermore, the proposed topology addresses the critical challenge of achieving near-zero DC flux across the entire operating range using an optimization technique. To validate the converter, a 1600/24 V, 1.4 kW prototype is developed. Experimental results demonstrate successful startup, steady-state, ZVS, and regulation, showing the effectiveness of the proposed topology in reducing voltage stress, eliminating DC flux, and reliable ZVS performance.
- 3 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (1) , 190-202
An Integrated Active Clamp-Based Asymmetric Half-Bridge Topology for High-Voltage High-Buck Intermediate Bus Converters
This paper presents a novel integrated active-clamped topology optimized for high-voltage, high step-down Intermediate Bus Converter (IBC) applications. A comprehensive analysis of the converter’s operating modes and performance characterization is provided. The topology incorporates an integrated clamp technique that effectively reduces secondary switch peak voltage stress. Enhanced Zero Voltage Switching (ZVS) performance is achieved through increased total inductive energy. Furthermore, the proposed topology addresses the critical challenge of achieving near-zero DC flux across the entire operating range using an optimization technique. To validate the converter, a 1600/24 V, 1.4 kW prototype is developed. Experimental results demonstrate successful startup, steady-state, ZVS, and regulation, showing the effectiveness of the proposed topology in reducing voltage stress, eliminating DC flux, and reliable ZVS performance.
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 12614-12625
A Modified Asymmetric Half-Bridge Topology for High-Voltage High-Power Intermediate Bus Converters
The article presents a converter topology designed for high-voltage, and high-power applications. The proposed topology uses two switches each in the primary and secondary. Existing solutions suitable for these applications face limitations in terms of the transformer dc flux at high power levels, which leads to larger core size. This article proposes a methodology to design the transformer at high power and high buck ratio to minimize dc flux problem. In doing so, zero voltage switching (ZVS) operation is forced to be comparable to the existing solutions by selecting a suitable ZVS inductor. The proposed converter achieves an 80% reduction in dc flux from the existing topology at rated power. Analysis of the operating intervals of the proposed converter and its dynamic modeling are presented. Based on these analyses, a 1600 V to 24 V/ 1.4 kW voltage regulated prototype is designed and its operation is validated.
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 12614-12625
A Modified Asymmetric Half-Bridge Topology for High-Voltage High-Power Intermediate Bus Converters
The article presents a converter topology designed for high-voltage, and high-power applications. The proposed topology uses two switches each in the primary and secondary. Existing solutions suitable for these applications face limitations in terms of the transformer dc flux at high power levels, which leads to larger core size. This article proposes a methodology to design the transformer at high power and high buck ratio to minimize dc flux problem. In doing so, zero voltage switching (ZVS) operation is forced to be comparable to the existing solutions by selecting a suitable ZVS inductor. The proposed converter achieves an 80% reduction in dc flux from the existing topology at rated power. Analysis of the operating intervals of the proposed converter and its dynamic modeling are presented. Based on these analyses, a 1600 V to 24 V/ 1.4 kW voltage regulated prototype is designed and its operation is validated.
- 22 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2188-2193
An Average Circuit Model of a Single-phase Grid-connected Inverter
The use of numerous Single-phase Grid-connected Inverters (SGI) is becoming a reality due to the implementation of smart LV-distribution grid. Power system planners generally use circuit simulation software to test and validate any planned expansion of the grid system. This simulation becomes resource and time consuming when many high switching frequency SGIs are present. To provide them with a simple yet accurate model of SGI, this paper proposes a loss-free impedance-based average circuit model. The development of the model and its experimental and simulation validations are covered in this work. The average circuit model is about 14 times faster than the switching circuit in the simulation test case and maximum error is 1.3 % in steady state.
- 22 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2188-2193
An Average Circuit Model of a Single-phase Grid-connected Inverter
The use of numerous Single-phase Grid-connected Inverters (SGI) is becoming a reality due to the implementation of smart LV-distribution grid. Power system planners generally use circuit simulation software to test and validate any planned expansion of the grid system. This simulation becomes resource and time consuming when many high switching frequency SGIs are present. To provide them with a simple yet accurate model of SGI, this paper proposes a loss-free impedance-based average circuit model. The development of the model and its experimental and simulation validations are covered in this work. The average circuit model is about 14 times faster than the switching circuit in the simulation test case and maximum error is 1.3 % in steady state.
- Open Access
- 20 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Power Electronics Magazine
- Vol. 9 (2) , 1
Table of Contents
Presents the table of contents for this issue of the publication.
- 20 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Power Electronics Magazine
- Vol. 9 (2) , 1
Open AccessTable of Contents
Presents the table of contents for this issue of the publication.
- 30 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (6) , 6430-6443
Synthesis of PWM Converters From Conversion Ratios Using Flux- or Charge-Balance Equations
To cater to the heterogeneity in emerging applications, researchers have constantly been driven to invent novel dc-dc converter topologies. A review of prior-art in dc-dc converter synthesis methods shows that many converter choices are available for a given input and output specification. This paper quantifies the number of these choices using the Flux Balance Equation (FBE). As the number of state variables that can be used to derive the FBE is limited, it is possible to find out the total number of possible FBEs available for a given voltage conversion ratio. Once the FBEs are known, synthesizing a converter is carried out as an inverse problem. Three different strategies to solve this inverse problem of converter synthesis and some critical synthesis results are summarized in this article. The dual synthesis of current-fed topologies with given current conversion ratios based on the Charge Balance Equation (CBE) is also demonstrated. Four novel topologies were synthesized to illustrate the effectiveness of the CBE-based synthesis method. The mathematical formulation of the CBE-based inverse problem and quantification of complexities in solving it are also reported.
- 30 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (6) , 6430-6443
Synthesis of PWM Converters From Conversion Ratios Using Flux- or Charge-Balance Equations
To cater to the heterogeneity in emerging applications, researchers have constantly been driven to invent novel dc-dc converter topologies. A review of prior-art in dc-dc converter synthesis methods shows that many converter choices are available for a given input and output specification. This paper quantifies the number of these choices using the Flux Balance Equation (FBE). As the number of state variables that can be used to derive the FBE is limited, it is possible to find out the total number of possible FBEs available for a given voltage conversion ratio. Once the FBEs are known, synthesizing a converter is carried out as an inverse problem. Three different strategies to solve this inverse problem of converter synthesis and some critical synthesis results are summarized in this article. The dual synthesis of current-fed topologies with given current conversion ratios based on the Charge Balance Equation (CBE) is also demonstrated. Four novel topologies were synthesized to illustrate the effectiveness of the CBE-based synthesis method. The mathematical formulation of the CBE-based inverse problem and quantification of complexities in solving it are also reported.
- 7 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (3) , 3999-4010
Novel Single-Phase Cuk-Derived Bridgeless PFC Converter for On-Board EV Charger With Reduced Number of Components
This article proposes a novel single-phase bridgeless Cuk-derived power factor corrected (PFC) converter with reduced component count for on-board EV charging application. The unique feature of this proposal is to design and operate the output inductor of the converter in discontinuous current mode for the complete power range to attain PFC naturally at ac mains, thereby not requiring the input voltage and input current sensing, which reduces the converter cost, and improves the power density as well as converter robustness to high-frequency noise. The converter control is very simple in operation and easy in implementation with only a single sensor-based voltage control loop. The semiconductor components voltage stress of the proposed power converter is lower when compared to the traditional Cuk converter. The simulation results from PSIM 11 and experimental results are given by testing a proof-of-concept hardware laboratory prototype to demonstrate the high performance of PFC operation of the proposed converter.
- 7 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (3) , 3999-4010
Novel Single-Phase Cuk-Derived Bridgeless PFC Converter for On-Board EV Charger With Reduced Number of Components
This article proposes a novel single-phase bridgeless Cuk-derived power factor corrected (PFC) converter with reduced component count for on-board EV charging application. The unique feature of this proposal is to design and operate the output inductor of the converter in discontinuous current mode for the complete power range to attain PFC naturally at ac mains, thereby not requiring the input voltage and input current sensing, which reduces the converter cost, and improves the power density as well as converter robustness to high-frequency noise. The converter control is very simple in operation and easy in implementation with only a single sensor-based voltage control loop. The semiconductor components voltage stress of the proposed power converter is lower when compared to the traditional Cuk converter. The simulation results from PSIM 11 and experimental results are given by testing a proof-of-concept hardware laboratory prototype to demonstrate the high performance of PFC operation of the proposed converter.
- 16 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (6) , 7354-7369
PWM Control of N-Phase Interleaved Active Front-End Boost Stage-Based Impedance Source Inverter
Non-isolated high gain inverters, such as impedance source inverters (ZSI), are suitable for applications with limited input dc source voltage, e.g., microinverters. High gain in these inverters is attributed to the front-end boost stage (FBS). High step-up ratio results in very high input current as the power rating of the inverter goes up. This leads to significant conduction loss in the non ideal elements of the inverter, specifically in the FBS, thereby degrading the efficiency. Paralleling and interleaving the FBS is a feasible solution to achieve higher efficiency. This demands for a generalized pulsewidth modulation (PWM) scheme, which can enable paralleling of multiple interleaved FBSs. In this article, a novel PWM scheme is proposed to implement n -phase interleaving of active FBS-based ZSIs. The PWM scheme ensures synchronized operation between the “ n ” interleaved FBS and the single inverter stage. As case studies, the PWM scheme is implemented in n -phase interleaved current fed switched inverter, switched boost inverter, and quasi switched boost inverter. Steady-state operation of these topologies with three interleaved phases is verified using PLECS simulation. Operation of an interleaved current fed switched inverter with three interleaved phases is verified experimentally using a 200-W proof of concept prototype.
- 16 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (6) , 7354-7369
PWM Control of N-Phase Interleaved Active Front-End Boost Stage-Based Impedance Source Inverter
Non-isolated high gain inverters, such as impedance source inverters (ZSI), are suitable for applications with limited input dc source voltage, e.g., microinverters. High gain in these inverters is attributed to the front-end boost stage (FBS). High step-up ratio results in very high input current as the power rating of the inverter goes up. This leads to significant conduction loss in the non ideal elements of the inverter, specifically in the FBS, thereby degrading the efficiency. Paralleling and interleaving the FBS is a feasible solution to achieve higher efficiency. This demands for a generalized pulsewidth modulation (PWM) scheme, which can enable paralleling of multiple interleaved FBSs. In this article, a novel PWM scheme is proposed to implement n -phase interleaving of active FBS-based ZSIs. The PWM scheme ensures synchronized operation between the “ n ” interleaved FBS and the single inverter stage. As case studies, the PWM scheme is implemented in n -phase interleaved current fed switched inverter, switched boost inverter, and quasi switched boost inverter. Steady-state operation of these topologies with three interleaved phases is verified using PLECS simulation. Operation of an interleaved current fed switched inverter with three interleaved phases is verified experimentally using a 200-W proof of concept prototype.