Tomoaki Takao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tomoaki Takao has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Satoshi Fukui
Graduate School of Science and Technology, Niigata University, Niigata, Japan
3 shared publications K Nakaoka
2 shared publicationsT. Suzuki
2 shared publicationsA Masaoka
1 shared publicationA. Yamanaka
1 shared publicationArata Nishimura
1 shared publication
Latest Publications
- 30 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 24 (3) , 1-4
Thermal Stability of Butt Joint for CS Conductor in JT-60SA
Thermal stability for a butt joint of a central solenoid (CS) is experimentally and numerically estimated. The butt joint is fabricated using a strand bundle for the CS conductor, and the quench current of the butt joint is measured by changing the temperature of supercritical helium (SHe). The results show that even if the SHe flow slows to 50% of the rated flow, the temperature margin of the joint is 4 K, the butt joint is sufficiently stable. We also calculate the thermal stability of the butt joint by changing certain operating conditions. According to the simulation data, when connection resistance becomes high, from 2 to 5 nΩ, there is little change in the temperature margin. The experimental and numerical results suggest that the butt joint does not quench and can be operated with stability.
- 30 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 24 (3) , 1-4
Thermal Stability of Butt Joint for CS Conductor in JT-60SA
Thermal stability for a butt joint of a central solenoid (CS) is experimentally and numerically estimated. The butt joint is fabricated using a strand bundle for the CS conductor, and the quench current of the butt joint is measured by changing the temperature of supercritical helium (SHe). The results show that even if the SHe flow slows to 50% of the rated flow, the temperature margin of the joint is 4 K, the butt joint is sufficiently stable. We also calculate the thermal stability of the butt joint by changing certain operating conditions. According to the simulation data, when connection resistance becomes high, from 2 to 5 nΩ, there is little change in the temperature margin. The experimental and numerical results suggest that the butt joint does not quench and can be operated with stability.
- 10 November 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 22 (3) , 4704604
Influence of External Magnetic Field on AC Losses at EF Coil Joints of JT-60SA
We experimentally and numerically evaluated the AC loss occurred in joints of the EF coil in JT60-SA. There are two kinds of the joints (pancake joint and terminal joint) in the EF coil. Firstly, the AC losses of the joints were experimentally obtained. The experimental results showed that the AC losses in the pancake and the terminal joints were smaller than the loss in the prototype joint which was the previously designed joint and we measured the loss data in two years ago. And next, we numerically analysed the AC loss of the joints. The simulated results well agreed with the experimentally measured data. And we numerically tried to decrease the loss. The AC loss could be decreased to be half of the initial loss.
- 10 November 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 22 (3) , 4704604
Influence of External Magnetic Field on AC Losses at EF Coil Joints of JT-60SA
We experimentally and numerically evaluated the AC loss occurred in joints of the EF coil in JT60-SA. There are two kinds of the joints (pancake joint and terminal joint) in the EF coil. Firstly, the AC losses of the joints were experimentally obtained. The experimental results showed that the AC losses in the pancake and the terminal joints were smaller than the loss in the prototype joint which was the previously designed joint and we measured the loss data in two years ago. And next, we numerically analysed the AC loss of the joints. The simulated results well agreed with the experimentally measured data. And we numerically tried to decrease the loss. The AC loss could be decreased to be half of the initial loss.
- 23 July 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 17 (2) , 2414-2417
Influence of Mechanical Vibration and Losses in Bi-2223 Coils on Thermal Expansion Properties of Bobbin Materials
We fabricated small superconducting coils whose bobbins were made of a Dyneema fiber reinforced plastic (DFRP), a Dyneema and glass fiber reinforced plastic (DGFRP), and a glass fiber reinforced plastic (GFRP). Because Dyneema fibers in the FRP expand, we are able to control thermal expansion/contraction property in a circumferential direction of the DFRP and the DGFRP pipes during a cooling process from room temperature to low temperature. We fabricated two kinds of the DFRP and the DGFRP coils whose properties were expansion and contraction. The GFRP has always a characteristic of contraction during cool-down. We measured a mechanical loss that occurred in the coil during AC excitation of those coils. The mechanical losses decreased with increasing winding tension of the conductor in the coils according to the experimental data. And the mechanical loss of the coils whose bobbins had characteristic of expansion was considerably smaller than that of contraction. It was experimentally shown that the bobbins with expansion property during the cooling down were effective to decrease the mechanical loss of the AC coils.
- 23 July 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 17 (2) , 2414-2417
Influence of Mechanical Vibration and Losses in Bi-2223 Coils on Thermal Expansion Properties of Bobbin Materials
We fabricated small superconducting coils whose bobbins were made of a Dyneema fiber reinforced plastic (DFRP), a Dyneema and glass fiber reinforced plastic (DGFRP), and a glass fiber reinforced plastic (GFRP). Because Dyneema fibers in the FRP expand, we are able to control thermal expansion/contraction property in a circumferential direction of the DFRP and the DGFRP pipes during a cooling process from room temperature to low temperature. We fabricated two kinds of the DFRP and the DGFRP coils whose properties were expansion and contraction. The GFRP has always a characteristic of contraction during cool-down. We measured a mechanical loss that occurred in the coil during AC excitation of those coils. The mechanical losses decreased with increasing winding tension of the conductor in the coils according to the experimental data. And the mechanical loss of the coils whose bobbins had characteristic of expansion was considerably smaller than that of contraction. It was experimentally shown that the bobbins with expansion property during the cooling down were effective to decrease the mechanical loss of the AC coils.
- 1 March 2000
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 10 (1) , 1255-1258
Measuring method of critical current for NbTi superconductors with Cu and CuNi matrices
- 1 March 2000
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 10 (1) , 1255-1258
Measuring method of critical current for NbTi superconductors with Cu and CuNi matrices
- 1 March 1992
- Vol. 45 (3) , 237-42
[Aortic valve replacement with Medtronic Hall valve (#21) using technique of enlargement of aortic annulus].
Aortic valve replacement was performed in 2 patients with severe aortic stenosis. They showed severe calcified valve and narrow aortic annulus. The aortic annulus was enlarged to 22 mm and 23 mm in diameter in each patient by the technique of Nicks. Then aortic valve replacement was performed with Medtronic-Hall valve (#21) which is supposed to get larger valve area than Björk-Shiley valve. They had good operative course except a complication of complete AV block in the first patient. In this patient a DDD pacemaker was implanted 19 days after operation. Cardiac catheterization was performed 11 or 12 months after operation and good hemodynamics was obtained in both patients. The aortic mean pressure gradient was 6 and 5 mmHg at rest, and 9 and 13 mmHg during exercise on bicycle ergometer in each patient. The aortic valve area was 1.7 and 1.9 cm2, respectively. Body surface area in these patients was 1.29 and 1.36 m2. We concluded that in the small patients we could get a good result with Medtronic Hall valve (#21).
- 1 March 1992
- Vol. 45 (3) , 237-42
[Aortic valve replacement with Medtronic Hall valve (#21) using technique of enlargement of aortic annulus].
Aortic valve replacement was performed in 2 patients with severe aortic stenosis. They showed severe calcified valve and narrow aortic annulus. The aortic annulus was enlarged to 22 mm and 23 mm in diameter in each patient by the technique of Nicks. Then aortic valve replacement was performed with Medtronic-Hall valve (#21) which is supposed to get larger valve area than Björk-Shiley valve. They had good operative course except a complication of complete AV block in the first patient. In this patient a DDD pacemaker was implanted 19 days after operation. Cardiac catheterization was performed 11 or 12 months after operation and good hemodynamics was obtained in both patients. The aortic mean pressure gradient was 6 and 5 mmHg at rest, and 9 and 13 mmHg during exercise on bicycle ergometer in each patient. The aortic valve area was 1.7 and 1.9 cm2, respectively. Body surface area in these patients was 1.29 and 1.36 m2. We concluded that in the small patients we could get a good result with Medtronic Hall valve (#21).
- 1 June 1981
- Vol. 34 (6) , 421-5
[The evaluation of surgical therapy for bronchogenic carcinoma in the patients over 70 years old (author's transl)].
- 1 June 1981
- Vol. 34 (6) , 421-5
[The evaluation of surgical therapy for bronchogenic carcinoma in the patients over 70 years old (author's transl)].