Andreas Walther
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Andreas Walther has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
Thomas Heuser
DWI-Leibniz Institute for Interactive Materials, Forckenbeckstr. 50, 52074, Aachen, Germany
7 shared publicationsElisabeth Weyandt
DWI—Leibniz Institute for Interactive Materials, Forckenbeckstrasse 50, 52056 Aachen (Germany) http://www.dwi.rwth‐aachen.de
5 shared publications- Paramita Das
Department of Chemical Engineering, Indian Institute of Science Education and Research Bhopal, Bhopal Bypass Road, Bhopal 462066, Madhya Pradesh, India
5 shared publications Thomas Tigges
DWI-Leibniz-Institute for Interactive Materials, Forckenbeckstrasse 50, 52074, Aachen, Germany
5 shared publicationsBaochun Wang
DWI-, Leibniz Institute for Interactive Materials, Forckenbeckstr. 50, 52056, Aachen, Germany
4 shared publications- Jose Guillermo Torres-Rendon
University of Guadalajara
4 shared publications
Latest Publications
- Open Access
- 5 January 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 39910
Large-scale, thick, self-assembled, nacre-mimetic brick-walls as fire barrier coatings on textiles
Highly loaded polymer/clay nanocomposites with layered structures are emerging as robust fire retardant surface coatings. However, time-intensive sequential deposition processes, e.g. layer-by-layer strategies, hinders obtaining large coating thicknesses and complicates an implementation into existing technologies. Here, we demonstrate a single-step, water-borne approach to prepare thick, self-assembling, hybrid fire barrier coatings of sodium carboxymethyl cellulose (CMC)/montmorillonite (MTM) with well-defined, bioinspired brick-wall nanostructure, and showcase their application on textile. The coating thickness on the textile is tailored using different concentrations of CMC/MTM (1–5 wt%) in the coating bath. While lower concentrations impart conformal coatings of fibers, thicker continuous coatings are obtained on the textile surface from highest concentration. Comprehensive fire barrier and fire retardancy tests elucidate the increasing fire barrier and retardancy properties with increasing coating thickness. The materials are free of halogen and heavy metal atoms, and are sourced from sustainable and partly even renewable building blocks. We further introduce an amphiphobic surface modification on the coating to impart oil and water repellency, as well as self-cleaning features. Hence, our study presents a generic, environmentally friendly, scalable, and one-pot coating approach that can be introduced into existing technologies to prepare bioinspired, thick, fire barrier nanocomposite coatings on diverse surfaces.
- 5 January 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 39910
Open AccessLarge-scale, thick, self-assembled, nacre-mimetic brick-walls as fire barrier coatings on textiles
Highly loaded polymer/clay nanocomposites with layered structures are emerging as robust fire retardant surface coatings. However, time-intensive sequential deposition processes, e.g. layer-by-layer strategies, hinders obtaining large coating thicknesses and complicates an implementation into existing technologies. Here, we demonstrate a single-step, water-borne approach to prepare thick, self-assembling, hybrid fire barrier coatings of sodium carboxymethyl cellulose (CMC)/montmorillonite (MTM) with well-defined, bioinspired brick-wall nanostructure, and showcase their application on textile. The coating thickness on the textile is tailored using different concentrations of CMC/MTM (1–5 wt%) in the coating bath. While lower concentrations impart conformal coatings of fibers, thicker continuous coatings are obtained on the textile surface from highest concentration. Comprehensive fire barrier and fire retardancy tests elucidate the increasing fire barrier and retardancy properties with increasing coating thickness. The materials are free of halogen and heavy metal atoms, and are sourced from sustainable and partly even renewable building blocks. We further introduce an amphiphobic surface modification on the coating to impart oil and water repellency, as well as self-cleaning features. Hence, our study presents a generic, environmentally friendly, scalable, and one-pot coating approach that can be introduced into existing technologies to prepare bioinspired, thick, fire barrier nanocomposite coatings on diverse surfaces.
- 28 July 2016
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 55 (37) , 11261-11265
Hierarchical Self‐Assembly of 3D‐Printed Lock‐and‐Key Colloids through Shape Recognition
Progress in colloid self‐assembly crucially depends on finding preparation methods for anisotropic particles with recognition motifs to facilitate the formation of superstructures. Here, we demonstrate for the first time that direct 3D laser writing can be used to fabricate uniform populations of anisotropic cone‐shaped particles that are suitable for self‐assembly through shape recognition. The driving force for the self‐assembly of the colloidal particles into linear supracolloidal polymers are depletion forces. The resulting supracolloidal fibrils undergo hierarchical ordering and form nematic liquid‐crystalline domains. Such a behavior could so far not be observed in the absence of an electric field. The study opens possibilities for using direct laser writing to prepare designed colloids on demand, and to study their self‐assembly.
- 28 July 2016
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 55 (37) , 11261-11265
Hierarchical Self‐Assembly of 3D‐Printed Lock‐and‐Key Colloids through Shape Recognition
Progress in colloid self‐assembly crucially depends on finding preparation methods for anisotropic particles with recognition motifs to facilitate the formation of superstructures. Here, we demonstrate for the first time that direct 3D laser writing can be used to fabricate uniform populations of anisotropic cone‐shaped particles that are suitable for self‐assembly through shape recognition. The driving force for the self‐assembly of the colloidal particles into linear supracolloidal polymers are depletion forces. The resulting supracolloidal fibrils undergo hierarchical ordering and form nematic liquid‐crystalline domains. Such a behavior could so far not be observed in the absence of an electric field. The study opens possibilities for using direct laser writing to prepare designed colloids on demand, and to study their self‐assembly.
- 28 July 2016
- Published by Wiley in Angewandte Chemie
- Vol. 128 (37) , 11429-11434
Hierarchische Selbstassemblierung dreidimensional gedruckter Schlüssel/Schloss-Kolloide durch Formerkennung
- 28 July 2016
- Published by Wiley in Angewandte Chemie
- Vol. 128 (37) , 11429-11434
Hierarchische Selbstassemblierung dreidimensional gedruckter Schlüssel/Schloss-Kolloide durch Formerkennung
- Open Access
Biomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering
Materials based on biodegradable polyesters, such as poly(butylene terephthalate) (PBT) or poly(butylene terephthalate-co-poly(alkylene glycol) terephthalate) (PBTAT), have potential application as pro-regenerative scaffolds for bone tissue engineering. Herein, the preparation of films composed of PBT or PBTAT and an engineered spider silk protein, (eADF4(C16)), that displays multiple carboxylic acid moieties capable of binding calcium ions and facilitating their biomineralization with calcium carbonate or calcium phosphate is reported. Human mesenchymal stem cells cultured on films mineralized with calcium phosphate show enhanced levels of alkaline phosphatase activity suggesting that such composites have potential use for bone tissue engineering.
Open AccessBiomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering
Materials based on biodegradable polyesters, such as poly(butylene terephthalate) (PBT) or poly(butylene terephthalate-co-poly(alkylene glycol) terephthalate) (PBTAT), have potential application as pro-regenerative scaffolds for bone tissue engineering. Herein, the preparation of films composed of PBT or PBTAT and an engineered spider silk protein, (eADF4(C16)), that displays multiple carboxylic acid moieties capable of binding calcium ions and facilitating their biomineralization with calcium carbonate or calcium phosphate is reported. Human mesenchymal stem cells cultured on films mineralized with calcium phosphate show enhanced levels of alkaline phosphatase activity suggesting that such composites have potential use for bone tissue engineering.
- 20 June 2016
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 37 (16) , 1323-1330
Simple Platform Method for the Synthesis of Densely Functionalized Microgels by Modification of Active Ester Latex Particles
This study reports a simple and versatile synthesis route for the preparation of highly uniform and densely functionalized aqueous microgels by modification of latex particles composed of an active ester monomer (pentafluorophenyl acrylate; PFPA). The hydrophobic nature of the PFPA allows synthesizing very uniform latex particles via emulsion polymerization, whose size can be controlled by the surfactant concentration, while the degree of crosslinking is a function of the added crosslinker. The high reactivity of the PFPA groups toward nucleophilic substitution delivers a platform method to synthesize functional microgels by reaction with functional amines. This study demonstrates this process for the dense functionalization of the entire particle with an amine carrying a pH‐responsive unit. This study further describes the influence of the crosslinking degree on the ability for swelling of the resulting microgels in aqueous dispersion. image
- 20 June 2016
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 37 (16) , 1323-1330
Simple Platform Method for the Synthesis of Densely Functionalized Microgels by Modification of Active Ester Latex Particles
This study reports a simple and versatile synthesis route for the preparation of highly uniform and densely functionalized aqueous microgels by modification of latex particles composed of an active ester monomer (pentafluorophenyl acrylate; PFPA). The hydrophobic nature of the PFPA allows synthesizing very uniform latex particles via emulsion polymerization, whose size can be controlled by the surfactant concentration, while the degree of crosslinking is a function of the added crosslinker. The high reactivity of the PFPA groups toward nucleophilic substitution delivers a platform method to synthesize functional microgels by reaction with functional amines. This study demonstrates this process for the dense functionalization of the entire particle with an amine carrying a pH‐responsive unit. This study further describes the influence of the crosslinking degree on the ability for swelling of the resulting microgels in aqueous dispersion. image
- 8 April 2016
- Published by Wiley in Angewandte Chemie
- Vol. 128 (20) , 6070-6074
Bioinspired Mechanical Gradients in Cellulose Nanofibril/Polymer Nanopapers
Mechanical gradients are important as tough joints, for strain field engineering in printable electronics, for actuators, and for biological studies, yet they are difficult to prepare and quantitatively characterize. We demonstrate the additive fabrication of gradient bioinspired nanocomposites based on stiff, renewable cellulose nanofibrils that are bottom‐up toughened via a tailor‐made copolymer. Direct filament writing of different nanocomposite hydrogels in patterns, and subsequent healing of the filaments into continuous films while drying leads to a variety of linear, parabolic and striped bulk gradients. In situ digital image correlation under tensile deformation reveals important differences in the strain fields regarding asymmetry and step heights of the patterns. We envisage that merging top‐down and bottom‐up structuring of nanocellulose hybrids opens avenues for aperiodic and multiscale, bioinspired nanocomposites with optimized combinations of stiffness and toughness.
- 8 April 2016
- Published by Wiley in Angewandte Chemie
- Vol. 128 (20) , 6070-6074
Bioinspired Mechanical Gradients in Cellulose Nanofibril/Polymer Nanopapers
Mechanical gradients are important as tough joints, for strain field engineering in printable electronics, for actuators, and for biological studies, yet they are difficult to prepare and quantitatively characterize. We demonstrate the additive fabrication of gradient bioinspired nanocomposites based on stiff, renewable cellulose nanofibrils that are bottom‐up toughened via a tailor‐made copolymer. Direct filament writing of different nanocomposite hydrogels in patterns, and subsequent healing of the filaments into continuous films while drying leads to a variety of linear, parabolic and striped bulk gradients. In situ digital image correlation under tensile deformation reveals important differences in the strain fields regarding asymmetry and step heights of the patterns. We envisage that merging top‐down and bottom‐up structuring of nanocellulose hybrids opens avenues for aperiodic and multiscale, bioinspired nanocomposites with optimized combinations of stiffness and toughness.
- 8 April 2016
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 55 (20) , 5966-5970
Bioinspired Mechanical Gradients in Cellulose Nanofibril/Polymer Nanopapers
Mechanical gradients are important as tough joints, for strain field engineering in printable electronics, for actuators, and for biological studies, yet they are difficult to prepare and quantitatively characterize. We demonstrate the additive fabrication of gradient bioinspired nanocomposites based on stiff, renewable cellulose nanofibrils that are bottom‐up toughened via a tailor‐made copolymer. Direct filament writing of different nanocomposite hydrogels in patterns, and subsequent healing of the filaments into continuous films while drying leads to a variety of linear, parabolic and striped bulk gradients. In situ digital image correlation under tensile deformation reveals important differences in the strain fields regarding asymmetry and step heights of the patterns. We envisage that merging top‐down and bottom‐up structuring of nanocellulose hybrids opens avenues for aperiodic and multiscale, bioinspired nanocomposites with optimized combinations of stiffness and toughness.
- 8 April 2016
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 55 (20) , 5966-5970
Bioinspired Mechanical Gradients in Cellulose Nanofibril/Polymer Nanopapers
Mechanical gradients are important as tough joints, for strain field engineering in printable electronics, for actuators, and for biological studies, yet they are difficult to prepare and quantitatively characterize. We demonstrate the additive fabrication of gradient bioinspired nanocomposites based on stiff, renewable cellulose nanofibrils that are bottom‐up toughened via a tailor‐made copolymer. Direct filament writing of different nanocomposite hydrogels in patterns, and subsequent healing of the filaments into continuous films while drying leads to a variety of linear, parabolic and striped bulk gradients. In situ digital image correlation under tensile deformation reveals important differences in the strain fields regarding asymmetry and step heights of the patterns. We envisage that merging top‐down and bottom‐up structuring of nanocellulose hybrids opens avenues for aperiodic and multiscale, bioinspired nanocomposites with optimized combinations of stiffness and toughness.
- 21 September 2015
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 9 (11) , 10637-10646
Self-Assembled, Iridescent, Crustacean-Mimetic Nanocomposites with Tailored Periodicity and Layered Cuticular Structure
Natural high-performance materials inspire the pursuit of ordered hard/soft nanocomposite structures at high fractions of reinforcements and with balanced molecular interactions. Herein, we develop a facile, waterborne self-assembly pathway to mimic the multiscale cuticle structure of the crustacean armor by combining hard reinforcing cellulose nanocrystals (CNCs) with soft poly(vinyl alcohol) (PVA). We show iridescent CNC nanocomposites with cholesteric liquid-crystal structure, in which different helical pitches and photonic band gaps can be realized by varying the CNC/PVA ratio. We further show that multilayered crustacean-mimetic materials with tailored periodicity and layered cuticular structure can be obtained by sequential preparation pathways. The transition from a cholesteric to a disordered structure occurs for a critical polymer concentration. Correspondingly, we find a transition from stiff and strong mechanical behavior to materials with increasing ductility. Crack propagation studies using s...
- 21 September 2015
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 9 (11) , 10637-10646
Self-Assembled, Iridescent, Crustacean-Mimetic Nanocomposites with Tailored Periodicity and Layered Cuticular Structure
Natural high-performance materials inspire the pursuit of ordered hard/soft nanocomposite structures at high fractions of reinforcements and with balanced molecular interactions. Herein, we develop a facile, waterborne self-assembly pathway to mimic the multiscale cuticle structure of the crustacean armor by combining hard reinforcing cellulose nanocrystals (CNCs) with soft poly(vinyl alcohol) (PVA). We show iridescent CNC nanocomposites with cholesteric liquid-crystal structure, in which different helical pitches and photonic band gaps can be realized by varying the CNC/PVA ratio. We further show that multilayered crustacean-mimetic materials with tailored periodicity and layered cuticular structure can be obtained by sequential preparation pathways. The transition from a cholesteric to a disordered structure occurs for a critical polymer concentration. Correspondingly, we find a transition from stiff and strong mechanical behavior to materials with increasing ductility. Crack propagation studies using s...
- Open Access
- 17 September 2015
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 54 (45) , 13467
Inside Back Cover: Biocatalytic Feedback‐Driven Temporal Programming of Self‐Regulating Peptide Hydrogels (Angew. Chem. Int. Ed. 45/2015)
- 17 September 2015
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 54 (45) , 13467
Open AccessInside Back Cover: Biocatalytic Feedback‐Driven Temporal Programming of Self‐Regulating Peptide Hydrogels (Angew. Chem. Int. Ed. 45/2015)
- Open Access
- 17 September 2015
- Published by Wiley in Angewandte Chemie
- Vol. 127 (45) , 13669
Innenrücktitelbild: Biocatalytic Feedback‐Driven Temporal Programming of Self‐Regulating Peptide Hydrogels (Angew. Chem. 45/2015)
- 17 September 2015
- Published by Wiley in Angewandte Chemie
- Vol. 127 (45) , 13669
Open AccessInnenrücktitelbild: Biocatalytic Feedback‐Driven Temporal Programming of Self‐Regulating Peptide Hydrogels (Angew. Chem. 45/2015)